Related
i started i started running mik runny yesterday. I dont know if it was somethign with the rom but. I just updated my prl on dfs and once i went to reboot it wont go past the white htc screen and just keeps bootlooping. I cannot figure it out. Ive wiped everything muiltiple times. my nanadroids do the same thing. New roms too. I even did a factory reset. i dont get it My recovery and fastboot still work though. any other suggestions?
Flashed a new recovery img. i was using twrp2.0 i flashed twrp 1.3 to see if i had any luck with that but no dice. Im downloading the latest RUU now and hopefully that will fix it. Im guessing if it doesnt then something happened to my phone. If im not mistaken flashing the PG86IMG will flash allthe partitions so there would be no reason for it to not work unless of course something happened to the hardware?
Btw Hboot 1.4 and running mikrunny when the bootloop started. Im super confused since it booted fine for me numerous times. The only thing i changed before this reboot was prl and i turned fastboot off earlier. one other thing im downloading RUU_Shooter_S_Sprint_WWE_2.17.651.5 radio 1.00.1216 this isnt going to affect my hboot once flashing right? even if i have to re root thats fine i just dont wanna get stuck in 1.5 prison
Is your phone unlocked and s-off
Sent from my PG86100 using XDA App
jwolf1 said:
Is your phone unlocked and s-off
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
yea. i want to run one of the ruu but not sure which one to run in order to keep my hboot at 1.4 so i can re root.
It depends all on the update an ruin will
Tell u if there's a new. Version
Sent from my PG86100 using XDA App
mteezey said:
i started i started running mik runny yesterday. I dont know if it was somethign with the rom but. I just updated my prl on dfs and once i went to reboot it wont go past the white htc screen and just keeps bootlooping. I cannot figure it out. Ive wiped everything muiltiple times. my nanadroids do the same thing. New roms too. I even did a factory reset. i dont get it My recovery and fastboot still work though. any other suggestions?
Flashed a new recovery img. i was using twrp2.0 i flashed twrp 1.3 to see if i had any luck with that but no dice. Im downloading the latest RUU now and hopefully that will fix it. Im guessing if it doesnt then something happened to my phone. If im not mistaken flashing the PG86IMG will flash allthe partitions so there would be no reason for it to not work unless of course something happened to the hardware?
Btw Hboot 1.4 and running mikrunny when the bootloop started. Im super confused since it booted fine for me numerous times. The only thing i changed before this reboot was prl and i turned fastboot off earlier. one other thing im downloading RUU_Shooter_S_Sprint_WWE_2.17.651.5 radio 1.00.1216 this isnt going to affect my hboot once flashing right? even if i have to re root thats fine i just dont wanna get stuck in 1.5 prison
Click to expand...
Click to collapse
TWRP 2.0 has been giving dirty flashes. I had nothing but bad things with it along with other folks. I jumped back to CWM as recovery it has been stable and flashes smooth no dirty flashes.
reaper24 said:
TWRP 2.0 has been giving dirty flashes. I had nothing but bad things with it along with other folks. I jumped back to CWM as recovery it has been stable and flashes smooth no dirty flashes.
Click to expand...
Click to collapse
well im kinda stuck now. I tried to run the ruu for my hboot version and on step 11 system it failed to unzip. so now i have s off still but no recovery. Im gonna try to put cwm back on my sd and hope that it flashes and see if i can get some rom to flash. I cant figure this out i feel like a newb again. fml. Does it matter that it wasnt the first time i booted into the rom for it to be a bad flash like that?
well i think im officially bricked. I ran an older ruu and it failed to unzip system so after much searching i decided to run one of the latest pg86imgs it fully updated succesfully but still bootloops at the htc screen. So now i have a locked hboot 1.5 with s-off. I gotta get some sleep and see what i can do tommorow. from evreything i have read they say im not bricked if im able to do what i have. but i dont understand why nothing will work.
mteezey said:
well i think im officially bricked. I ran an older ruu and it failed to unzip system so after much searching i decided to run one of the latest pg86imgs it fully updated succesfully but still bootloops at the htc screen. So now i have a locked hboot 1.5 with s-off. I gotta get some sleep and see what i can do tommorow. from evreything i have read they say im not bricked if im able to do what i have. but i dont understand why nothing will work.
Click to expand...
Click to collapse
Sup man your not bricked don't worry or even soft bricked lol.
You should of waited on that updated zip reason it's boot loopin or lockin up is due to the phone never got wiped before the update....
Here is the CWM that will work for you. You need to put the img in your platform tools for ADB. Rename the img file to cwm then plug your phone in while in hboot. Type fastboot flash recovery cwm.img this will put the recovery back on your phone man.
In CWM you can mount your phone and copy a rom you downloaded off xda. Take the rom you downloaded open it up on your computer make a copy of the boot.img place that in your platform tools folder. Now mount your phone using CWM copy the romwhich will put it on your sd card. Now wipe everything. Then while in ADB type : adb reboot bootloader this will take you to hboot again now type fastboot flash boot boot.img this will flash the kernel for you. Now go back into recovery and flash your rom.
You should be good to go man. Let me know if you have any questions.
This should get your phone working...
The good thing about the 3vo is dat its unbrickable just always keep a Rom u ones work an always erase scrub thing / factory reset cutting shortcuts don't work in rooting/dev world
Sent from EPIC JWOLF1 using XDA App
reaper24 said:
Sup man your not bricked don't worry or even soft bricked lol.
You should of waited on that updated zip reason it's boot loopin or lockin up is due to the phone never got wiped before the update....
Here is the CWM that will work for you. You need to put the img in your platform tools for ADB. Rename the img file to cwm then plug your phone in while in hboot. Type fastboot flash recovery cwm.img this will put the recovery back on your phone man.
In CWM you can mount your phone and copy a rom you downloaded off xda. Take the rom you downloaded open it up on your computer make a copy of the boot.img place that in your platform tools folder. Now mount your phone using CWM copy the romwhich will put it on your sd card. Now wipe everything. Then while in ADB type : adb reboot bootloader this will take you to hboot again now type fastboot flash boot boot.img this will flash the kernel for you. Now go back into recovery and flash your rom.
You should be good to go man. Let me know if you have any questions.
This should get your phone working...
Click to expand...
Click to collapse
Ok so now that i ran that ruu that changed my hboot to 1.5 is that gonna affect how the cwm installs?even though it says s-off. Also for some reason im having trouble running any commands for fastboot. Ive followed a bunch of guides made sure the envinronemtal variables were correct ect, ect but none of the adb commands will work. Maybe its my pc idk.
Since i cant get fastboot to work on my pc do you think i would just be able to reinstall clockworkmod by renaming it on my sd like you do to root in the first place. Then use it to wipe and then try reflashing?
U might have to re unlock it if ur 3vo says locked at the top if not u should have no problem
Sent from my PG86100 using XDA App
I was able to re run the pg86img with the 1.4 hboot now im back on hboot 1.4 still with soff and doesnt say locked anymore. I also was able to install recovery again but i used twrp 1.3 since none of the download links i could find were good and the ones that were good were disk img. I tried running virus superwipe tool and reflashing a rom again to see if anyhtign changed but it didnt. i really just wish i could get the commands to work to use fastboot and adb.
One thing i just noticed in recovery i went into mounts and system and data were unmounted and cache and sdcard were mounted. Do i need to mount everything and try again or was that the way it should of been?
mteezey said:
Ok so now that i ran that ruu that changed my hboot to 1.5 is that gonna affect how the cwm installs?even though it says s-off. Also for some reason im having trouble running any commands for fastboot. Ive followed a bunch of guides made sure the envinronemtal variables were correct ect, ect but none of the adb commands will work. Maybe its my pc idk.
Since i cant get fastboot to work on my pc do you think i would just be able to reinstall clockworkmod by renaming it on my sd like you do to root in the first place. Then use it to wipe and then try reflashing?
Click to expand...
Click to collapse
I read about the 1.5 with s-off issue a while back when hboot 1.5 first was released. As long as you have s-off, it doesn't really matter what hboot you have. You'll be able to flash entire ROMs (kernel included) in one step just like you could before your issue arose, because you have s-off. I sadly don't have enough experience with fastboot to be able to give you an easy guide to flashing cwm onto your phone though, but I hope this helps you at least somewhat.
EDIT: I just realized everything I said now doesn't matter since you're not on hboot 1.5 anymore...sorry about that. reaper24 gave you a link to cwm 4.0.1.4 in post #8 in this thread. Stop using TWRP 1.3, there's already a TWRP 2 specifically for EVO 3D and even the latest TWRP has been having issues. CWM has been completely stable for me on every HTC phone I've ever used (Hero CDMA, EVO 4G and now currently the EVO 3D). CWM 4.0.1.4 is in post #8 of this thread as an attachment (it's a small link in between reaper's post and his signature)
w0rdOo said:
I read about the 1.5 with s-off issue a while back when hboot 1.5 first was released. As long as you have s-off, it doesn't really matter what hboot you have. You'll be able to flash entire ROMs (kernel included) in one step just like you could before your issue arose, because you have s-off. I sadly don't have enough experience with fastboot to be able to give you an easy guide to flashing cwm onto your phone though, but I hope this helps you at least somewhat.
EDIT: I just realized everything I said now doesn't matter since you're not on hboot 1.5 anymore...sorry about that. reaper24 gave you a link to cwm 4.0.1.4 in post #8 in this thread. Stop using TWRP 1.3, there's already a TWRP 2 specifically for EVO 3D and even the latest TWRP has been having issues. CWM has been completely stable for me on every HTC phone I've ever used (Hero CDMA, EVO 4G and now currently the EVO 3D). CWM 4.0.1.4 is in post #8 of this thread as an attachment (it's a small link in between reaper's post and his signature)
Click to expand...
Click to collapse
Cwm is the best so far no issues,
reaper24 said:
Cwm is the best so far no issues,
Click to expand...
Click to collapse
i have the clockwork mod from your link downloaded. That one i have to flash via cmd right? im having trouble getting any commands to work on either pc. However i did get qtadb to work on one of them im able to run all the same commands from the shell on it correct? nevermind on this i dont think this is made for that i may be wrong though.
If so i can flash recovery img then flash new rom boot img ect. .. i was told i have to do via pc in order to flash the boot partition cause thats whats causing my problem.
I have all the paths specified on my pc and everythign i need in my tools folder but cant cd to anyhting. i have read and read and read im pretty sure i have it all setup right but everytime i cd it says path not specified or not a batch file or soemthing.
mteezey said:
i have the clockwork mod from your link downloaded. That one i have to flash via cmd right? im having trouble getting any commands to work on either pc. However i did get qtadb to work on one of them im able to run all the same commands from the shell on it correct? nevermind on this i dont think this is made for that i may be wrong though.
If so i can flash recovery img then flash new rom boot img ect. .. i was told i have to do via pc in order to flash the boot partition cause thats whats causing my problem.
I have all the paths specified on my pc and everythign i need in my tools folder but cant cd to anyhting. i have read and read and read im pretty sure i have it all setup right but everytime i cd it says path not specified or not a batch file or soemthing.
Click to expand...
Click to collapse
If your on windows 7 just go to the folder platform tools hold down the shift key and right click on folder tell it to open a CMD prompt makes it easy.
reaper24 said:
If your on windows 7 just go to the folder platform tools hold down the shift key and right click on folder tell it to open a CMD prompt makes it easy.
Click to expand...
Click to collapse
fml lol. all this time. Now i gotta go back a couple post and re read what you said. Thanks i dont now why it wouldnt let me cd to the folder. it shows the same way i typed. Thanks alot hopefully i can get this now.
mteezey said:
fml lol. all this time. Now i gotta go back a couple post and re read what you said. Thanks i dont now why it wouldnt let me cd to the folder. it shows the same way i typed. Thanks alot hopefully i can get this now.
Click to expand...
Click to collapse
ok im so close yet so far. When trying to flash the recovery img it says
sending 'recovery
okay
writing recovery
failed(remote:not allowed)
i have twrp on here now is there anyway for me to wipe the boot partition and reflash that then my rom. sorry i know im asking questions i have read the answers to i have just read so much over the past 30-40 hours. actually cwm has a format boot option in it right?
mteezey said:
ok im so close yet so far. When trying to flash the recovery img it says
sending 'recovery
okay
writing recovery
failed(remote:not allowed)
i have twrp on here now is there anyway for me to wipe the boot partition and reflash that then my rom. sorry i know im asking questions i have read the answers to i have just read so much over the past 30-40 hours. actually cwm has a format boot option in it right?
Click to expand...
Click to collapse
Make sure the old recovery isn't still on the sd card like the recovery.img. Then try again. Your close man
reaper24 said:
Make sure the old recovery isn't still on the sd card like the recovery.img. Then try again. Your close man
Click to expand...
Click to collapse
i know right. I think what it might be is something i saw earlier about since i flashed the PG86IMG and it took revolutionary off my hboot that i no longer have fastboot. I tried to run some other commands and got the same thing. So for the hell of it i tried to run revolutionary from hbootand fastboot and it just waits for device. But then when i reboot the phone it will recognize it, but it doesnt stay long enough to run revolutionary.No i just have to remember which pg86img it was that made my phone just stay at the white screen so i can run revolutionary. lol
Hi Everybody-
Last night I went to unlock my phone, and it froze. I'm running leaked ICS firmware, and it has been working fine for weeks. So, pulled battery, restarted, and it would not boot past the white HTC screen.
So far I have tried-
F
lashed a new kernel in fastboot
Restoring a backup (and flashing appropriate kernel)
Re-installing the rom and reflashing kernel
Still won't boot past white HTC screen.
I'm on the new firmware, so I thought I'd try to reflash the RUU. I have the PH98.. file on the SD card, it reads it but won't give me the option to flash, just returns to bootloader.
At this point i'm stuck, is there a way to force the RUU to flash? Should I think about getting S-OFF and trying to flash back to the GB RUU?
Thanks for any help!!!!!
Do s-off. DO NOT UNLOCK AFTER S-OFF. Then run gb ruu twice. Try booting back up after if no luck on the ruu then run in fastboot mode fastboot oem writesecure 3 and send in for a warranty replacement
Sent from my ADR6425LVW using XDA
Thanks! I appreciate the response. I still want to try to get the RUU to take without s-off, not sure what's up with that. Good call on not unlocking after s-off, maybe that will make the RUU take.
You could try running the ruu exe on windows if you haven't tried it yet.
Sent from my HTC Vigor
So, an update-
I flashed the RUU through fastboot (thanks, con247), it went fine but it still just shows the white HTC screen, goes black, then shows the white HTC screen again.
I am going to try unlocking again, flashing a new recovery and reinstalling a basic rom. At this point though, I have a bad feeling.
Has anyone seen anything like this!?!?!? It seems like something internal tweaked, but what would cause only that part (i guess \system, \data or something) to fail?
Thanks all for any help!!!
iaRIVR said:
So, an update-
I flashed the RUU through fastboot (thanks, con247), it went fine but it still just shows the white HTC screen, goes black, then shows the white HTC screen again.
I am going to try unlocking again, flashing a new recovery and reinstalling a basic rom. At this point though, I have a bad feeling.
Has anyone seen anything like this!?!?!? It seems like something internal tweaked, but what would cause only that part (i guess \system, \data or something) to fail?
Thanks all for any help!!!
Click to expand...
Click to collapse
Can you get back to fastboot by holding power and volume down? If so get to command prompt through platform-tools then type fastboot boot boot.img
that should hopefully get you to your rom. Thats what worked for me anyway.
If that fails
iflawdya said:
Can you get back to fastboot by holding power and volume down? If so get to command prompt through platform-tools then type fastboot boot boot.img
that should hopefully get you to your rom. Thats what worked for me anyway.
Click to expand...
Click to collapse
if you dont know the button combination use ADB
ENTER
ADB REBOOT FASTBOOT
or try
ADB REBOOT RECOVERY
then press your home key for a few seconds. choose wipe data. then reboot
hope this helps.
I helped him last night and the issue was resolved.
con247 said:
I helped him last night and the issue was resolved.
Click to expand...
Click to collapse
You the man!
con247 said:
I helped him last night and the issue was resolved.
Click to expand...
Click to collapse
Having the same problem with a friends phone...could you give some instruction on what you did?
If your on the GB firmware, run the Ruu.exe, you should be able to pull the battery and run from fastboot.
If your on an ics leak, con worked some magic so I could s-off, then run the GB Ruu. Check to see if wifi works, mine is c still broken and I will have to get a clnr. The easiest fix might be to just call for a replacement.
Sent from my ADR6425LVW using Tapatalk 2
Hi everyone, so this is my first post here so please deal with me. I did check for similar problems with no results and think I'm posting in the right area. So try not to get too frustrated with me if I'm wrong. Anyway, with all of that out of the way on to my problem.
I have a rooted rezound, which was first rooted to get rid of bloatware and such, but I decided I wanted to try out some different roms. My problem is every time I flash a rom, which appears successful, but whenever it boots up it'll freeze up on the HTC screen. To fix this I've been just been pulling the battery and restoring to the backup I made before trying to flash roms. I would really like to try some different roms but I've gotten stuck on that screen with each one I've tried. If anyone could help me I'd greatly appreciate it!
Some additional info: I use to have a rooted thunderbolt and have some experience with flashing roms and all that stuff, but I'd still consider myself a noob. I have Amon Ra Recovery on my rezound and the screen in hboot reads:
***Unlocked***
vigor put ship s-on rl
HBOOT-2.11.0000
eMMC-boot
Oct 6 2011, 15:43:22
(I'm not sure why it says the incorrect date and time?)
I've tried several different things to successfully flash roms. I've tried flashing them with and without PH98IMG.zip on the root of my sd. I've tired it with and without the back on my phone. When flashing roms I ALWAYS wiped all data before flashing. That's just about everything relevant I can think of, sorry for the length! I figured the more information the easier for you guys to help!
If you're S-ON, you need to flash the P98IMG zip with the ROM. This contains the boot.img file.
Just extract the ROM of choice, take the P98IMG zip, throw it on your SD card and boot into your bootloader. Go into the bootloader menu and it'll install. Reboot, phone will work just fine.
If there isn't a P98IMG file and just a boot.img file, just push it through ADB while in your fastboot.
command is fastboot flash boot boot.img
So the P98IMG.zip file I downloaded and had on the root of my sd card is different than the one I need to extract from the rom or was I just not installing it right?
I did have a P98IMG.zip on the root of my sd card and I went into hboot, then I went to recovery and flashed my rom. Is there another step I need to take in installing the P98IMG.zip or should it automatically install? Do I need to reboot it between installing the P98IMG.zip and the rom?
Thanks for you help and quick response! I'm really trying to learn and get better at this stuff
After you flash your ROM, go into your bootloader (fully, must be in the bootloader menu) and it'll install. Follow the onscreen instructions, reboot, and remove the zip from your SD card.
Hope that helps.
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
ewy87 said:
I still cant get it to work :/
Heres step by step what I did:
1) Went into hboot > recovery
2) Wiped all data
3) Flashed ROM
4) Powered off phone using option in the recovery menu
5) Powered back on into hboot. The green text appeared that said loading and stuff about P98IMG and a blue bar on the side, but this process was very brief (maybe 2 seconds tops) and there were no instructions to follow
6) Went into recovery and rebooted my phone where I was stuck on the the HTC screen again
Can you point out where I'm going wrong or any possible issue?
Thanks again for you patience! I really appreciate your help!
Click to expand...
Click to collapse
How are you getting to recovery? It should give you an option to install update or reboot in hboot. If the ph98img is in the right spot you shouldn't be able to boot into recovery
With my phone powered off I'm holding down the power button and down volume button to get to hboot. I have my ROM and the PH98IMG.zip file both on the root of my SD card. It does very quickly appear to load the PH98IMG file but returns to the hboot screen the has the options: fastboot, recovery, factory reset, clear storage, sim lock, image crc.
Could it be that the PH98IMG file should be somewhere else? And was I doing everything in the correct order or do I install the PH98IMG first?
File may be bad. Do you have adb set up?
Sent from my ADR6425LVW using Tapatalk 2
Well actually I'm running off a mac and I've been using my sisters laptop for adb and that stuff but she just broke it...just my luck haha. Would I be able to download a different copy of PH98IMG from online and try that?
What ph file are you trying to flash? It should load it and ask if you want to update. Try downloading it again. May be a bad download
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
ewy87 said:
I'm trying to flash the Senseless-4.0.3-ICS-v1.0.0[2/4/2012] ROM (http://themikmik.com/showthread.php?11238-Senseless-4-0-3-ICS-v1-0-0-2-4-2012&p=178493#post178493) and I just saw a download for the PH98IMG file somewhere else on the website. Should the ROM include its own PH98IMG file? Thanks for both of your help! I have no experience with the PH files because my thunderbolt was s-off so i never dealt with this stuff before.
Click to expand...
Click to collapse
So s-off. Seriously though. You flashed a random ph file and thought it would work? It has to be the right one for the rom. Besides that rom isn't maintained anymore
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
ewy87 said:
The only method to get the rezound to s-off was using some wire trick and seemed like a difficult process. Would you recommend I do that?
And the post with the ROM said and ICS PH file would be fine, so I assumed it'd work. I guess I'll try a different ROM that includes a specific PH file and up to date. In which case I should be able to get everything to work with all the help from you and Chyrux. Thanks for everything!
Click to expand...
Click to collapse
I would recommend getting s-off. It's going to be the only method for this phone. I mean why waste another exploit to be patched? I would recommend con rom since it uses aroma to detect whether your s-on or s-off
Did you s-off your rezound? How were your experiences with it? I'm just worried about bricking my phone. But thanks for the ROM recommendation! I've been trying to find a good ROM
S-off was fairly easy, but you do need Windows or a Linux build.
My Evo has been completely trashed and I have no clue what to do.
I have hboot 1.19 s-on and I did the HTCdev unlock, and I rooted it and have the latest version TWRP (i think 2.3.something) with SuperSU installed. I tried to flash a ROM that was supposed to be compatible with with I had but i guess not. Everything was going great but I was stuck on the CM boot screen. After about 30 min of it sitting in that screen I figured something was wrong so i reset it and went back into TWRP. Someone told me to download MeanRom and flash that because its kernel and rom would fix everything. Here's where things get weird. I download MeanRom to my computer and mount my phone in TWRP to move the file over to the phone and when i went to factory reset before flashing it it kept saying unable to mount SD card and Internal Storage. I tried to do a restore my phone to an old back up and that wouldnt even work. So I wipe both caches and try to flash MeanRom anyway. i got a failed error and my phone shut off. Now my phone will only go into the Fastboot thing on the white screen and when i try to go into recovery, it just stays on the TWRP loading screen, not even letting me into the recovery program.
Is there anyway to fix this? My best buy insurance has expired because i missed 3 payments since I'm away at school and not working a whole bunch. So my whole smash it to pieces and get a new one solution is no longer an option.
I'm on a mac by the way so is there something I can enter into terminal to fix this? I don't care about losing any files or anything I'll do whatever I have to, to fix this.
Thanks in advance
- Josh
Read om4's guide don't panic...hboot 119 s-on you have to flash kernels separately.
Sent from my EVO using xda premium
I ran into the same problem. Word for word, really. I use a Mac, too. I went through HTCdev unlock, tried to flash a CM10 nightly and ran into a boot loop. No matter what I did, it was stuck. I couldn't restore to a nandroid backup because internal storage wouldn't mount. Couldn't do anything. All I had access to was bootloader and TWRP recovery.
I don't know the specifics of how this fixed it (I'm nothing close to a developer), but this is what I did to get out of it. You will need access to a Windows machine onto which you can download things.
1) If you still have access to fastboot, unroot your phone to stock. Completely stock.
2) Use DirtyRacun S-OFF (you'll need a Windows computer for this). Go through the whole process.
3) Re-root.
Nothing I tried fixed it until I started fresh. I couldn't tell you how it worked, but if you're desperate you really have nothing to lose but a little bit of time by doing the same thing I did.
Hope you get this figured out.
falconoble said:
I ran into the same problem. Word for word, really. I use a Mac, too. I went through HTCdev unlock, tried to flash a CM10 nightly and ran into a boot loop. No matter what I did, it was stuck. I couldn't restore to a nandroid backup because internal storage wouldn't mount. Couldn't do anything. All I had access to was bootloader and TWRP recovery.
I don't know the specifics of how this fixed it (I'm nothing close to a developer), but this is what I did to get out of it. You will need access to a Windows machine onto which you can download things.
1) If you still have access to fastboot, unroot your phone to stock. Completely stock.
2) Use DirtyRacun S-OFF (you'll need a Windows computer for this). Go through the whole process.
3) Re-root.
Nothing I tried fixed it until I started fresh. I couldn't tell you how it worked, but if you're desperate you really have nothing to lose but a little bit of time by doing the same thing I did.
Hope you get this figured out.
Click to expand...
Click to collapse
How would i unroot if I cant get into SuperSU since i cant boot up my phone? Do I need to do that first or can i just run the RUU without Going into SuperSU and hitting Unroot?
Also what do I need windows for? Getting S-OFF? Or unrooting?
Also thank you! I really hope this work!
Relock your phone from fastboot then run the RUU. Now you're completely stock.
Sent from my rooted LTEVO running CM10.
Shahal said:
Relock your phone from fastboot then run the RUU. Now you're completely stock.
Sent from my rooted LTEVO running CM10.
Click to expand...
Click to collapse
I'm sorry if this is a stupid question. But how do i re-lock it from fastboot?
U have to use the cmd window on your windows computer. I did it with mine before I ran dirty racun. It is a simple command but u have to be in the right directory ind the cmd line. Go through and look at the dirty racun guide and it tells u how to re-lock word for word I believe.
Sent from my EVO using xda app-developers app
Shahal said:
Relock your phone from fastboot then run the RUU. Now you're completely stock.
Sent from my rooted LTEVO running CM10.
Click to expand...
Click to collapse
Okay so I found a video on how to re-lock my phone in fastboot but when i type the command "fastboot oem lock"
it just says ' <waiting for device >
any suggestions on what to do? It's been stuck like this for about 5 min now.. in the video it took less than a second.
jklatt747 said:
Okay so I found a video on how to re-lock my phone in fastboot but when i type the command "fastboot oem lock"
it just says ' <waiting for device >
any suggestions on what to do? It's been stuck like this for about 5 min now.. in the video it took less than a second.
Click to expand...
Click to collapse
Turn on USB debug in devopleper options
Sent from a lens flare powered EVO LTE
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
jkrlvgn said:
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
Click to expand...
Click to collapse
Yeah i couldn't figure out how to do that. I would ask a question on how to do that and i just kept on getting the response of "google it" "look it up on youtube" or look in the forums. and I wasn't ever sure really where to find it because all my searches for it came up useless.
I just did the RUU on my phone and its finally back up and running! What a relief!!!
Now I'm going to try to get DirtyRacun s-off. How do I put a Custom Rom on my phone with S-off?
With s-off you just flash it in twrp..no extra steps
Sent from my EVO using xda premium
jkrlvgn said:
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
Click to expand...
Click to collapse
I only have windows 7 64bit. So this means i cannot go the dirtyracun route. Is there any other way to get S-OFF?
if not.. How do i fastboot flash the boot.IMG from the ROM manually?
jkrlvgn said:
What's funny is that all you had to do with s-on is flash the boot.IMG from the ROM via fastboot, just like the first reply said to.
You're doing more work right now than you needed to.
I realize this is a little late, but if you're still having trouble and you're still s-on, go read om4's guide, or get s-off.
If you want to stick with s-on, you will have to fastboot flash the boot.IMG files from the ROM manually.
Click to expand...
Click to collapse
I wish I'd ran into you when I had the same problem. I wasn't trying to make things more complicated for him, just telling him that when it happened to me, I went back to stock, went with S-OFF, and everything worked fine. At the very least I figured he probably would have just wanted his phone back.
falconoble said:
I wish I'd ran into you when I had the same problem. I wasn't trying to make things more complicated for him, just telling him that when it happened to me, I went back to stock, went with S-OFF, and everything worked fine. At the very least I figured he probably would have just wanted his phone back.
Click to expand...
Click to collapse
No. You helped me soooooo much! I was literally about to sell my phone for parts or something because everything went wrong that could go wrong and on top of that I couldn't find anything at all on how to fix it. I just did what you said and my phone is fixed! I want to go s-off now but dirtyracun doesn't support windows 7 with 64 bit, it only supports windows 7 with 32bit which I don't have access to. So i'm trying to find another way that is reliable to go S-OFF. It seems like S-OFF is the way to go and it makes everything easier.
If I cant find out how to go S-OFF with the windows 7 64 bit computer, then I guess i'll go S-on HTCdev unlock again and hopefully figure out how to manually flash the ROM or whatever it is that you do with S-ON.
jklatt747 said:
No. You helped me soooooo much! I was literally about to sell my phone for parts or something because everything went wrong that could go wrong and on top of that I couldn't find anything at all on how to fix it. I just did what you said and my phone is fixed! I want to go s-off now but dirtyracun doesn't support windows 7 with 64 bit, it only supports windows 7 with 32bit which I don't have access to. So i'm trying to find another way that is reliable to go S-OFF. It seems like S-OFF is the way to go and it makes everything easier.
If I cant find out how to go S-OFF with the windows 7 64 bit computer, then I guess i'll go S-on HTCdev unlock again and hopefully figure out how to manually flash the ROM or whatever it is that you do with S-ON.
Click to expand...
Click to collapse
Most sense roms come with a kernel installer for people that are S-ON and there have been reports of success using Win7 64bit and running DirtyRacun but.... if you run into problems they will not help you
bigdaddy619 said:
Most sense roms come with a kernel installer for people that are S-ON and there have been reports of success using Win7 64bit and running DirtyRacun but.... if you run into problems they will not help you
Click to expand...
Click to collapse
okay does anybody know on a mac what would I have to do to flash MeanRom to my phone with S-ON and HTCdev unlock?
I'm not sure how to use the kernel installer you're talking about or where to look for it.
jklatt747 said:
okay does anybody know on a mac what would I have to do to flash MeanRom to my phone with S-ON and HTCdev unlock?
I'm not sure how to use the kernel installer you're talking about or where to look for it.
Click to expand...
Click to collapse
It's included in the script just flash it like any other rom it takes a little longer to boot because it's writing the kenel so don't freak out
jklatt747 said:
okay does anybody know on a mac what would I have to do to flash MeanRom to my phone with S-ON and HTCdev unlock?
I'm not sure how to use the kernel installer you're talking about or where to look for it.
Click to expand...
Click to collapse
There is an app in the market called Flash Image GUI to use it all you have to do is click on browse in the app search where ever you downloaded your Rom or kernel select it and it will extract and flash the boot.IMG for you. So if you are s on and wanna flash a aosp Rom you can first flash the kernel using the app then it gives you the option to boot directly in to recovery then install as usual wipe system ,data, both caches and flash your Rom that you extracted the kernel from. You can also just flash just a kernel if you want to OC.
Sent from my EVO using xda premium
bigdaddy619 said:
It's included in the script just flash it like any other rom it takes a little longer to boot because it's writing the kenel so don't freak out
Click to expand...
Click to collapse
dandan2980 said:
There is an app in the market called Flash Image GUI to use it all you have to do is click on browse in the app search where ever you downloaded your Rom or kernel select it and it will extract and flash the boot.IMG for you. So if you are s on and wanna flash a aosp Rom you can first flash the kernel using the app then it gives you the option to boot directly in to recovery then install as usual wipe system ,data, both caches and flash your Rom that you extracted the kernel from. You can also just flash just a kernel if you want to OC.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Okay so here's whats happens for me.
When i go bigdaddy's way: I put the MeanRom zip on my phone from my computer (MeanRom v64 or what ever the latest one is) I factory reset, wipe cache, wipe dalvic chache, and then go to install find the app and swipe to flash.. everything seems fine until i get an error and fail. It also says there is no MD5 file when i do this.
When I go dandan's way: I have the MeanRom zip on my phone (i've tried this with v64 *or whatever the latest one is* and v34) then i go into flash image GUI and go through finding it and everything. Then i get an error right above the Flash Image button saying "zip file must contain only one of the following: recovery.img, zimage, or a type of boot.img!" On my computer I unzipped the file and looked inside and all I see the boot.img and some folders but no recover or zimage so i dont know what it is talking about.
I really dont want to go through the processes of unrooting and relocking my phone again so i want to do this right. Any help from here on out would be greatly appreciated!
If someone could give me a step by step to follow or something for putting the Latest version of MeanRom on my phone that would be great!! I think i read somewhere that you have to put on the old version of MeanRom first. If that is so, could you also include how i would go about updating from the old version to the new one?
(If you're going to help me please make sure your method supports the HTC EVO 4G LTE on hBoot 1.19 Software v. 2.13.651.1 71ORD HTCdev Unlocked and Rooted with SuperSU and TWRP. (GooManager, and Flash Image GUI are installed to)
I dont know if this matters but it also says under Kernel Version:
3.0.8-01680-gb6402b4
[email protected] #1
SMP PREEMPT
Other info:
Baseband v: 1.12.11.0809
Android Version: 4.04
HTC Sense: 4.1
HTC SDK API level: 4.24
I know this post is really long and I probably put waaayyy more information then I actually needed to but I just want to be safe. It seems like everything I try for putting any Roms on my phone goes wrong with an error or failed message and I really want to do this.
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help