[Q] Why can't I root again? - AT&T Samsung Galaxy Note I717

Okay so I rooted my Note once using Odin and left one rom on it for months. I recently needed to take it into the service center due to a stretched out charging port so I downloaded and flashed the stock .tar via Odin, now I'm trying to reroot it again using the same Odin method I used the first time and my phone just gets stuck on the bootscreen. I've reflashed the stock .tar and tried reflashing the root 3-4 times now and nothing is changing. Could somebody let me know what I'm doing wrong? Is there another way to get my phone rooted again? I tried just installing superuser and rom manager thinking maybe it was already rooted and they didn't work. Thanks.

You should be first flashing CWM.
Then you can flash a rooted rom.
All you need is your phone in Download Mode (not recovery mode) and Odin3 ver 1.85 on your pc, then flash the CWM tar in odin's PDA slot.
As to your current problem, if you are GB you have to flash a GB rooted kernel. But possibly your phone is ICS now, so you have to flash a rooted ICS kernel.

rangercaptain said:
You should be first flashing CWM.
Then you can flash a rooted rom.
All you need is your phone in Download Mode (not recovery mode) and Odin3 ver 1.85 on your pc, then flash the CWM tar in odin's PDA slot.
As to your current problem, if you are GB you have to flash a GB rooted kernel. But possibly your phone is ICS now, so you have to flash a rooted ICS kernel.
Click to expand...
Click to collapse
Alright thanks I'll try that out, I was under the impression that I needed to root before I could use CWM, as to being on ICS, I don't think so seeing as I was rooted using the same rom for the past few months and haven't updated it, I didn't even know ICS had been officially released until today lol thanks for the info I'll try it out.

Related

[Q] Kernel Panic with Many ROMs.

I am using SGS2 i9100 and rooted and CWM installed as follows:
1. PC Odin Flash LPB Firmware (ICS 4.0.3).
2. PC Odin Flash CF Root LPB Kernel.
3. Mobile Odin Flash Stock LPB Kernel to remove Yellow triangle.
4. Mobile Odin Flash CF Kernel again to get CWM Recovery as well as root.
So far everything is OK. I can boot to recovery and installed CheckROM v6. Perfect no problems.
Then decided to try MIUI (ICS) when it was released. After complete wipe, ROM installation completed and on reboot > Kernel Panic Upload Mode. Couldn't boot to recovery Just to Download Mode. Had to follow steps 1 to 4 again to get Phone working with root and recovery. Tried a couple of times with MIUI from different sources like miui.us or miuiandroid.com but same result. So back to CheckRom v6 which works without problem.
With recent better ICS ROMs available, tried to install Omega v1.0. Again Kernel Panic Upload Mode. Followed steps 1 to 4 again. Tried Omega 12.0 used by lot of people. Again Kernel Panic Upload Mode. Tried PC Odin Flash of Siyah Kernel. Got the Siyah screen to show on bootup but this remained a while ... ROM did not boot and then screen turned to Kernel Panic Upload Mode after waiting a couple of minutes.
After again doing steps 1 to 4 I am back on CheckROM v6 which works flawlessly.
Why can I not use any rom which tons of users are using? Is there a hardware peculiarity which is preventing this? Should I try out old or new or ICS bootloaders? I don't want to mess with bootloaders as I hear these can hard brick the device.
Any suggestions?
Thanks.
PS: My Complete Wipe steps are:
1. Remove user data/Factory reset.
2. Clear Cache
3. Clear Dalvik Cache.
4. Optionally Format system partition in mounts and storage.
The reason is obvious ....Why old LPB???? Stay away.....
Start again from the GB rom better 2.3.5 from odin
Root with cf root and flash any rom what you want from CWM...
No need to change bootloader again...the one you get along with the gb rom is enough further for all
OK I have KE8 (Gingerbread ROM 2.3.3 which is latest for my location) downloaded. Will a PC Odin flash of this remove my current troublesome bootloaders? Or should I download another GB Rom 2.3.5 or newer for PC Odin Flash?
PS: I used LPB assuming that an ICS Rom would give me the bootloaders which would not give me headaches from installing custom ROMs from XDA here. If someone could explain to me where my logic went wrong?
ZACQ8 you called LPB old, but wouldn't it be newer than the 2.3.5 GB ROMs?
NeoMustain said:
OK I have KE8 (Gingerbread ROM 2.3.3 which is latest for my location) downloaded. Will a PC Odin flash of this remove my current troublesome bootloaders? Or should I download another GB Rom 2.3.5 or newer for PC Odin Flash?
PS: I used LPB assuming that an ICS Rom would give me the bootloaders which would not give me headaches from installing custom ROMs from XDA here. If someone could explain to me where my logic went wrong?
ZACQ8 you called LPB old, but wouldn't it be newer than the 2.3.5 GB ROMs?
Click to expand...
Click to collapse
you can flash the one which you are having now, but make sure CF-root is available for that to Root and install CWM, for your further flashing of ROMs,
yes that will replace the bootloader, but doesnt matter, it will be ok for all custom roms, (unless some Rom devs insist to replace bootloader first for their Roms)
I told the LPB is the old in the sence, it is old beta release among the ICS versions. Kernel Panic was highly reported while using this version.
Kernel panic Mode is hardly reported when people are coming from GB roms and installing Roms from CWM. that is why I sugested flash a GB rom from ODIN then move to any ROM through CWM.
You can also flash and try latest ICS version from ODIN.
Cool. That's the task for tonight then.
Sent from my GNex on AOKP.
if you are flashing a custom ICS ROM take the LP9 version,
one custom ROM with LP8 version has gaven me once the Kernel Panic
Goodluck
Thanks that worked. Installed Omega 1.0. Downloading Omega 2.1. No kernel panics. So from now the phone shoul dbe trouble fre hopfully.
wen u get prblms instead of keeping on flashing jus stop an ask..
flash stock gb after wipe..
then root properly..
don go for any rcs,beta,alpha root release....
then its a good idea to flash stock ics ...
wen u get a clear pic,u can go for aokp,aosp which will b diff...
bottom line kno some basics instead of jumping far away......cheerz
Looks like I'm in the same situation, I had used odin to flash with I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar.md5 back in Jan/Feb and flashed it with CF-Root-SGS2_XX_OXA_LP2-v5.2-CWM5 kernel.
I was then able to flash new ROMS no problem with CWN
Then flashed the other day with the latest Ressurection Remix 2.2 and am getting the dreaded "Kernel Panic...."
So I'm back to the I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship ROM.
My plan is to flash it with a 2.3.6 ROM using odin, then apply the CF-Root kernel and from there I'm hoping I can then apply Ressurection Remix ROM.
I'm just a bit unsure of which versions of the ROMS to use, I haven't been able to find a guide to selecting the correct versions for my phone. Any pointers would be greatly appreciated.

[Q] Galaxy tab 2 7 Running 4.0.4, Cant install CWM

Hello apparently 4.0.4 auto resets recovery if you try to flash a different one.
I just got my memory card, looking forward to root/mess with my tab, but when I used Odin to flash CWM and Rebooted the device, its still the stock recovery.
I was told I could flash 4.0.3 and go from there but GT-P3113_XAR_1_20120412104938_ldcgx9tzmx.zip Is a zip file and not recognized by odin, What do I do now?
Thanks
Edit*: I unzipped the archive, inside wan an MD5 recognized by odin, currently trying to flash that.
For those in the same situation, it worked, Sucessfully downgraded to 4.0.3
rnaodm said:
Hello apparently 4.0.4 auto resets recovery if you try to flash a different one.
I just got my memory card, looking forward to root/mess with my tab, but when I used Odin to flash CWM and Rebooted the device, its still the stock recovery.
I was told I could flash 4.0.3 and go from there but GT-P3113_XAR_1_20120412104938_ldcgx9tzmx.zip Is a zip file and not recognized by odin, What do I do now?
Thanks
Edit*: I unzipped the archive, inside wan an MD5 recognized by odin, currently trying to flash that.
Click to expand...
Click to collapse
Flashed CM10 Nightly and Gapps Thanks to http://forum.xda-developers.com/showthread.php?t=1791975
Currently waiting on the Cyanogenmod whriling logo to finish. If it does, All is well
Its been about 15 mins, Stuck at the same screen, I dont think its going to boot.
Edit* I forgot to wipe data after the install, I think thats why, Trying again

Galaxy Note - Gingerbread/ICS Update - Help!

I have a Samsung Note that I tried to upgrade when the ICS update leak came out, and it changed the Baseband to I717UCLC5 (which is ICS) but the Kernel is still 2.3.6 (GB).
I've tried Odin, and it always fails, I've tried rooting, it fails, and I'm stuck on GB and want to update/root/anything.
I think I need to either flash the Baseband back to GB stock, or the Kernel up to 4.0.3? If so, does anyone have the download for the i717?
Thanks
Connect to Odin and try to flash clockwork recovery from stickied rooting thread.. If that succeeds then put your external SD into another device and download a custom ics kernel from dev section. Put the sd card back into the phone. Boot into recovery and flash the kernel zip. Your phone should now be able to start.
Right now you have a GB kernel on an ICS ROM. That's why it boot loops.
Sent from my SAMSUNG-SGH-I717 using xda premium
http://forum.xda-developers.com/showthread.php?t=1506330
Follow this to get back to stock gingerbread and reroot. After that be sure and update cwm or flash twrp and choose any of our phones fine ROMs or the official ICS to flash in your new recovery . Ur choice after u r up and going.
And with using Odin u should see a yellow box with numbers on the left of ur PC screen. If not u need to update the drivers for the note on ur PC.
Sent from the cheeziest phone in the south!!!

[Q] Can't re-root after flashing stock ROM [XXEMC2]

Hello all,
About a week ago I ran into a problem with my phone which I thought was a software, which actually turned out to be a hardware issue with my sim card. Cutting a long story short, I flashed the official stock rom with Odin V1.85, and it passed and everything was back to default factory settings.
Having now got my issue fixed, I wanted to re-root my phone, in order to go back to the old ROM I was using [UltimaROM v12]. However after flashing various versions of CWM I cannot get my phone to root. I'm no stranger using Odin, I can usually install a new version of CWM in 30 seconds, but my phone is persistent on not rooting. I can't work out if maybe I've done something wrong, but it doesn't seem to be working.
I've tried running as Admin on W7, but it doesn't make a difference, I'd appreciate if one of you guys could help, as I used the search bar before, but it seems no-one has had this problem before.
Modem: XXEMC2
Kernel: Stock
ROM: Stock
Use TWRP or Philz recovery .
jje
I've tried those too, they don't work either.
bkss said:
I've tried those too, they don't work either.
Click to expand...
Click to collapse
Use framaroot aragorn exploit
Sent from my GT-I9300 using xda premium
What exactly is the problem? Phone not recognised? Flash failing? If so at what point? More details please
slaphead20 said:
What exactly is the problem? Phone not recognised? Flash failing? If so at what point? More details please
Click to expand...
Click to collapse
The problem is the recoveries will look as if they've installed fine through Odin getting a "passed" flag, but when I go to recovery it's still the default Android recovery. Therefore no root.
What root method are you using?
Chainfire one I believe. You basically install CWM recovery, then install SuperSU from .zip in CWM.
So you have rooted but can't install recovery?
Just flash one with mobile Odin,
Nope, no root yet, because I can't flash SuperSU.zip 'cause I'm still on the default recovery.
Just use the old cf root then update the recovery or use framaroot and flash recovery with mobile Odin
cf-root roots the phone as well as changes the stock recovery to cwm recovery! is this the exact one you flashed? http://forum.xda-developers.com/showthread.php?t=1695238
sriram231092 said:
cf-root roots the phone as well as changes the stock recovery to cwm recovery! is this the exact one you flashed? http://forum.xda-developers.com/showthread.php?t=1695238
Click to expand...
Click to collapse
I think he is using cf auto root

S2 stuck at boot screen

Currently stuck at the "Samsung Galaxy S II" logo during boot and it won't go past that. I can't seem to get into recovery mode, but I can access download mode.
I was using Shostock v3.0.2 (latest) and the Jeboo 1.3b Kernel.
SuperSU had an update and I accidentally pressed "twrp/cwm" instead of "normal" which made my phone reboot and has been stuck at the Samsung logo at boot up since then. When going into download mode, it shows that the current binary is "Samsung Official".
Would I have to use Kies to restore the phone back to factory or is there any other workarounds to get it to work again?
Thanks in advance!
You don't have to use Kies, but since it won't boot into recovery, you will have to load stock firmware. Your options are Kies if it will restore the phone, or, since you can get into download mode, flash the stock firmware with Odin.
If it were me, I would flash 4.0.4 UCLL6 plus root from the development forum using Odin3 v1.85, and then install Mobile Odin lite or Mobile Odin pro, and flash one of the custom kernels that are linked in the OP of that thread. Then you can load and flash SHOstock 3.0.2 again if you want.
creepyncrawly said:
You don't have to use Kies, but since it won't boot into recovery, you will have to load stock firmware. Your options are Kies if it will restore the phone, or, since you can get into download mode, flash the stock firmware with Odin.
If it were me, I would flash 4.0.4 UCLL6 plus root from the development forum using Odin3 v1.85, and then install Mobile Odin lite or Mobile Odin pro, and flash one of the custom kernels that are linked in the OP of that thread. Then you can load and flash SHOstock 3.0.2 again if you want.
Click to expand...
Click to collapse
Alright I will try out your recommendation and let you guys know how it turns out. Thanks for the quick reply. :good:
Alright I was able to flash back to stock 4.0.4 using your thread/guide. Will flash a custom kernel now.
Back to SHOstock again!
I had the same thing happen to me today.
I had to clear the cache on the phone and factory reset it after installing the 4.0.4 UCLL6 from creepyncrawly's sig.
It took 5 minutes or so after I did that of it sitting at the AT&T logo before the phone came up.
It sucked.

Categories

Resources