Hi Geeks,
i need a help
i want to install Cmiui JB rom in my Galaxy S2 I9100G .
i'm running on Gingerbread rom
can anyone give me installation procedure step by step
Thanks In Advance
anoopva said:
Hi Geeks,
i need a help
i want to install Cmiui JB rom in my Galaxy S2 I9100G .
i'm running on Gingerbread rom
can anyone give me installation procedure step by step
Thanks In Advance
Click to expand...
Click to collapse
have y checked the same Install instruction been provided in that so called Cmiui Jb rom thread, since every rom thread will have install instruction in there main page.
please fallow the same for a sucessfull install
cmiui Jb
Sun90 said:
have y checked the same Install instruction been provided in that so called Cmiui Jb rom thread, since every rom thread will have install instruction in there main page.
please fallow the same for a sucessfull install
Click to expand...
Click to collapse
Hi bro,
they have not given any procedure for installation
just check below xda thread
http://forum.xda-developers.com/showthread.php?t=1804619
anoopva said:
Hi bro,
they have not given any procedure for installation
just check below xda thread
http://forum.xda-developers.com/showthread.php?t=1804619
Click to expand...
Click to collapse
There are instructions, below the download links, above the credits.
Read more.
anoopva said:
Hi bro,
they have not given any procedure for installation
just check below xda thread
http://forum.xda-developers.com/showthread.php?t=1804619
Click to expand...
Click to collapse
oh common buddy r u serious
u think this thing on the main page of that link is a joke r what
Instructions
1. Do a full wipe (recommended but not always necessary)
2. Go to recovery and flash the ROM
3. Reboot (this might take some time due to app optimization)
4. Wait few minutes and reboot again
4. Enjoy MIUI and ICS
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
ctomgee said:
There are instructions, below the download links, above the credits.
Read more.
Click to expand...
Click to collapse
hey ma8 do u mind checking ur PM
Cmiui jb version
Sun90 said:
oh common buddy r u serious
u think this thing on the main page of that link is a joke r what
Instructions
1. Do a full wipe (recommended but not always necessary)
2. Go to recovery and flash the ROM
3. Reboot (this might take some time due to app optimization)
4. Wait few minutes and reboot again
4. Enjoy MIUI and ICS
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
hey ma8 do u mind checking ur PM
Click to expand...
Click to collapse
Hi bro,
It's not ics version, it is jb cMiui
I'm currently on gb stock rom
The procedures shown is for ics version
It doesn't matter. Anyway, you must do a factory reset when you want to upgrade Android version.
Now I'm on gb, I should install any cm9 based kernel with ics bootloader before flashing this cm9 /cm10 based jb rom.
Cmiui jb version
I read somewhere that I should install ics before going to jb
anoopva said:
Now I'm on gb, I should install any cm9 based kernel with ics bootloader before flashing this cm9 /cm10 based jb rom.
Click to expand...
Click to collapse
Yeah! The perfect way is to upgrade to ICS before flashing a JB ROM.
Flashing CM9 with ICS bootloader will be a good step. So just go ahead
anoopva said:
I read somewhere that I should install ics before going to jb
Click to expand...
Click to collapse
Swyped from my Samsung Galaxy SII
Supercharged ParanoidAndroid 2.12
Dorimanx kernel 5.76B
GT I9100
Next phone: Galaxy NOTE II
Cmiui jb version
Thanks all for the support.
lot of FC on cMIUI 2.10.19
Hi there!
I've installed the cMIUI 2.10.19 in the recommended way (before that i used CM10 M2), but I get now a lot of FC (with system UI, and more). My phone still works but I don't have notification bar. I cant use the file browser and a lot important feature. I think I have tried everything to solve that. (fix permissions, format system wipe everything before and just after flashing, waiting after boot and reboot and waiting again). But it wont work!
What should I do now?
(I have an i9100G)
Related
Here will be my little contribution to the communauty, since I build my house alone, I don't have time to cook anymore (need to learn android... I'am from WM6.5 kitchen time^^ )
So here is the Idea, Building a collection of modded roms to allow dual boot....
Synopsis :
As you all know, by now, you can not dual boot Samsung official based roms .... but here is a workround, found by some, ( Was inspired by this thread ; http://forum.xda-developers.com/showthread.php?t=2120514&page=30 )
My way of modding; (sorry , it was late yesterday when I wrote that... it's corrected now, not /data/appdata but /data/sec_data )
-redirecting /preload/symlink/system/app to /data/sec_data
-removing Kernel and Modem flash files.
-editing update-script accordingly.
My Idea is to maintain an up to date database of modded built that are working in Dual boot.
Configuration is :
1 - Install Any Custom JellyBean ROM Available here at XDA ( CM10,1; AOKP, AOSP, all but SAMMY BASED )
2 - Flash latest DorimanX Kernel V8.X Avaiable. ( http://dorimanx.suckup.de/download/ ) It support any 4.2 rom as 1rst rom, and SAMMY JB official as second boot.
3 - Flash a SAMMY Modded Rom from this repository that work in dual boot as 2nd ROM.WIPE DATA/CACHE BEFORE FLASH & FIX 2nd ROM PERMISSION AFTER FLASH
Enjoy!
( you can now flash 1st ROM the way you want it doesn't affect the 2nd ROM BUT you always need to flash DorimanX kernel V8 after!)
First Modded ROM Available will be NeatROM 4.4 Lite. wich is a good base for a sammy day use rom.
Will upload tomorrow from work.
Feedback is wellcome.
So here is the Modded ROM repository ! Remember, flash it as 2nd ROM!
NeatROM Lite v4.4 :
Original Topic=> http://forum.xda-developers.com/showthread.php?t=1569686
Modded ROM => http://www.multiupload.nl/L8UQXEZEUB (REUPLOADED... typo error in updaterscript=> delete_recursive("/data/secdata") instead of /data/sec_data....
WANAM LITE V14.3 :
Original Topic=> http://forum.xda-developers.com/showthread.php?t=1436817
Modded ROM =>http://www.multiupload.nl/D4767EMTZI
OMEGA XWLSD V20.1 : ( Aroma installer not preserved ... installed with all components)
Original Topic=> http://forum.xda-developers.com/showthread.php?t=1489197
Modded ROM =>http://www.multiupload.nl/272NEYN3QT
Biftor™ Rom V7.2 :
Original Topic=> http://forum.xda-developers.com/showthread.php?t=2026911
Modded ROM V7.2 => http://www.multiupload.nl/3FEGEZV0BH
Old Version : V7.01 Modded ROM => http://www.multiupload.nl/PMWNXTLP9Y
XWLSD Deodexed Stock Samsung :
Original Topic=> http://forum.xda-developers.com/showthread.php?t=2139353
Modded ROM =>http://www.multiupload.nl/6W9FYLOMCI
ALL CREDITS GO TO ROM MAKERS, I AM ONLY HERE TO MAKE IT EASIER FOR YOU TO HAVE A WORKING DUAL BOOT AND A ROCK STABLE SAMMY JB ROM ON 2ND ROM
...but if my little work helps you and make your life easier, leave a feedback.
If you want me to mod a Rom in particular, feel free to ask.
Remember : "Easy" Contribution doesn't mean useless...Please hit the Thanks Button!
AW: Dual Boot Rom Collections
Excuse me but I think you do what I/we did? Just curious.
Sent from my GT-I9100 using xda app-developers app
ohwarumbloss said:
Excuse me but I think you do what I/we did? Just curious.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Don't really know if its the same thing, just seen that the author of the other post tell to read end of the thread as he doesn't have followed all the story.
After reading some page of the thread, I thought it would have been a great thing to have roms already modded avaiable for download.
Will try to make and test as many rom as possible, but I am sure Syah will find a way of dual boot out of the box...
For the time, I hope it will helps someones.
Re: [ROM Repository] Dual Boot Rom Collections -SAMMY JB ROMS Modded for DualBoot.=
1. just ask author to mirror their work/roms
2. or use their links to modded roms
3. its just a clone dorimanx kernel thread /things around dualboot+kernel+working roms/
relic242 said:
1. just ask author to mirror their work/roms
2. or use their links to modded roms
3. its just a clone dorimanx kernel thread /things around dualboot+kernel+working roms/
Click to expand...
Click to collapse
Sorry but Roms are not available already modded to allow a dual boot as 2nd ROM or give all the links, I haven't found.
AW: [ROM Repository] Dual Boot Rom Collections -SAMMY JB ROMS Modded for DualBoot.
ocman said:
Don't really know if its the same thing, just seen that the author of the other post tell to read end of the thread as he doesn't have followed all the story.
After reading some page of the thread, I thought it would have been a great thing to have roms already modded avaiable for download.
Will try to make and test as many rom as possible, but I am sure Syah will find a way of dual boot out of the box...
For the time, I hope it will helps someones.
Click to expand...
Click to collapse
It's my thread
There are several Roms already prepared for dual boot. Most of them are made by other users, maybe you read a bit more in there, they have done good jobs on several custom Stock/Stock & AOSP Roms.
But hey, no (zero!) offense, if yours is better organized or more user friendly, it's all good because that's what it's all about.
Greetings
Thomas
Sent from my GT-I9100 using xda app-developers app
ohwarumbloss said:
It's my thread
There are several Roms already prepared for dual boot. Most of them are made by other users, maybe you read a bit more in there, they have done good jobs on several custom Stock/Stock & AOSP Roms.
But hey, no (zero!) offense, if yours is better organized or more user friendly, it's all good because that's what it's all about.
Greetings
Thomas
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
that's exactly the Idea, I 'm not meant to shine in public, my goal his only to contribute and make it easy to find for people wanting to make a Dual boot environnement with Sammy Jelly Bean.
Will try to make 3 more roms tonight, ( Omega, Wanam for example)
neat rom dualboot work fine in secondary with dorimanx 8.10
primary xtreme v.5beta2
good work
now i tried with any mod- i saw is not possible flash mod in cwm -maybe paste in system/app
edit-crt-off work------flash in cwm mod xtreme v9 4.2 apps-clock 4.2 and camera and gallery 4.2 working
flash alliance mod 2.4 naturally not work totally but now have edge zoom and save a screenshot in power menù
also ink effect work
WanamLite ROM added! Aroma installer preserved.
OMEGA XXLSD V20.1 Added! ( Aroma installer NOT preserved; default install )
hi,
i have Omega on 2nd ROM. Top of the Top for me
i have install many many rom i found between ls8,lsj,lsd, and even xxms1
i now stop this experience , now we have found an easy way with the help of this thread, as you say in post #1 : http://forum.xda-developers.com/showthread.php?t=2120514 with this cool man , i mean ohwarumbloss
but a repository like yours why not great idea.
thanks
Troubadour666 said:
hi,
i have Omega on 2nd ROM. Top of the Top for me
i have install many many rom i found between ls8,lsj,lsd, and even xxms1
i now stop this experience , now we have found an easy way with the help of this thread, as you say in post #1 : http://forum.xda-developers.com/showthread.php?t=2120514 with this cool man , i mean ohwarumbloss
but a repository like yours why not great idea.
thanks
Click to expand...
Click to collapse
thanks for your support, I feel good with Omega too, it's the last I have Modded.
now I make Bitfor because seems to be a really good piece of work too.
This repository is a way of promoting DorimanX Kernels because its a shame we can't dual boot a Sammy jb easily, for me dual boot is a way of always having a stock rom in my phone....now its easy to do out of the box for everyone.
I hav finished modding Bitfor and testing it. its very fast, no problem at all!
Really a good rom too.
Nice thread OP. You may want to add Space and Time 2.6 ROM if you're interested.
Attention: I'm pretty sure your multiupload links will expire very soon, so please consider reupload the roms to dev-host.
Or I may download these 3 roms and upload here for the community.
This is effin' BRILLIANT!
Thanks!
Never saw a site as worst as depositfiles.com for upload/download...
Dropbox or Vip-files please
Not sure if it's a problem related to WanamLite or this "dualboot mod" but for some reason, the status bar doesn't exist I obviously cleared data & caches. Everything else is working perfectly. I've never encountered anything like this in my two year experience in Android... Anyway, thanks a lot! :highfive: Dualboot rocks
I dont get it. What is about dorimanx v9.x? Or only v8.x works?
because as I understand v8.x - for Sammy based, v9.x - for CM,AOKP.
situation - i need AOKP as 1st, Wanam 14.3 as 2nd. Which kernel i need?
bseuhgm said:
I dont get it. What is about dorimanx v9.x? Or only v8.x works?
because as I understand v8.x - for Sammy based, v9.x - for CM,AOKP.
situation - i need AOKP as 1st, Wanam 14.3 as 2nd. Which kernel i need?
Click to expand...
Click to collapse
DorimanX 8.x
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
The Doriman kernel makes OMEGA v.20.1 sort of laggy.
---------- Post added at 12:11 PM ---------- Previous post was at 11:22 AM ----------
Hvilsted said:
The Doriman kernel makes OMEGA v.20.1 sort of laggy.
Click to expand...
Click to collapse
On another note: Can we be sure it's the DorimanX kernel that gives a laggy experience of OMEGA v.20.1 and not the modification to make it dual-boot able?
I don't have the technical skill and insight to determine what the problem is.
Hvilsted said:
DorimanX 8.x
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
The Doriman kernel makes OMEGA v.20.1 sort of laggy.
---------- Post added at 12:11 PM ---------- Previous post was at 11:22 AM ----------
On another note: Can we be sure it's the DorimanX kernel that gives a laggy experience of OMEGA v.20.1 and not the modification to make it dual-boot able?
I don't have the technical skill and insight to determine what the problem is.
Click to expand...
Click to collapse
The modifications we made to this roms have NOTHING to do with rom's performance and all things related to this.
There is variant that Dorimanx is not working very good with Omega, because as much I love this kernel it's always beta and not 100% stable.
911-Future_Maker said:
The modifications we made to this roms have NOTHING to do with rom's performance and all things related to this.
There is variant that Dorimanx is not working very good with Omega, because as much I love this kernel it's always beta and not 100% stable.
Click to expand...
Click to collapse
Thanks.
I will try another Sammy ROM then.
Hvilsted said:
Thanks.
I will try another Sammy ROM then.
Click to expand...
Click to collapse
I have also seen that Omega is a bit Laggy, hoping future updates of DorimanX kernel will resolve this.
Just finished Uploading new roms to the repository... but Bitfor has a new version 7.2..so I keep modding^^
TO bseuhgm :
DoriManX Kernel 8.XX is for any rom except ICS rom. You can use it with CM10.1/AOKP/AOSP etc...
DoriManX Kernel 9.XX is only for CM10.1/AOKP/AOSP etc AND DOESN'T SUPPORT ANY OF SAMMY OFFICIAL JellyBean ROMS
TO ALL : don't forget to do a Fix 2nd ROM Permission after Flash!!!
How to dualboot sammy and aosp roms please help:crying:
http://forum.xda-developers.com/showthread.php?t=2231877
Install as 1st rom aosp/aokp/etc.
Flash dorimanx 8.xx
Flash a rom from that link as 2nd rom
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
xXPr0XNinjaXx said:
How to dualboot sammy and aosp roms please help:crying:
Click to expand...
Click to collapse
1. Install Sammy ROM
2.flash dorimanx 8.14
3.in cwm recovery goto dual boot option
4.select install 2nd ROM from zip.
5.wipe data/cache of 2nd ROM
Reboot
U now have 2 ROMs
Sent from my GT-I9100 using xda app-developers app
oh thanks both of u guys but which rom should be my first rom aosp or stock ??
xXPr0XNinjaXx said:
oh thanks both of u guys but which rom should be my first rom aosp or stock ??
Click to expand...
Click to collapse
Read instructions, and search before posting. Just like your other thread. Reported.
Donnie Sins said:
Read instructions, and search before posting. Just like your other thread. Reported.
Click to expand...
Click to collapse
Dude i already searched but im new to xda and i want an easier method
Thread closed. Please search before posting.
hi good morn frens..i need help urgent
jus now tried to flash slimrom on my s3.done everything said in instructions.
each n evry step but s3 stuck at SAMSUNG LOGO..
booted into recovert mode.factory reset.wipe cache.wipe dalvik cache.everything done.but stuck at samsung logo.
i can flash stock firmware again n proceed the whole process again but tel me where i was going wrong
need urgent help
by the way i flashed the latest 6.2 bulid rom
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
srinivasmv419 said:
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
Click to expand...
Click to collapse
Did u format/system?
srinivasmv419 said:
hi good morn frens..i need help urgent
jus now tried to flash slimrom on my s3.done everything said in instructions.
each n evry step but s3 stuck at SAMSUNG LOGO..
booted into recovert mode.factory reset.wipe cache.wipe dalvik cache.everything done.but stuck at samsung logo.
i can flash stock firmware again n proceed the whole process again but tel me where i was going wrong
need urgent help
by the way i flashed the latest 6.2 bulid rom
Click to expand...
Click to collapse
galaxys3lover said:
Did u format/system?
Click to expand...
Click to collapse
hi dude,
to do wipe read this:
[Tool][Aroma]:Mega Wipe:Super Wipe:Factory Reset:Simple Wipe::For Flashaholics
http://forum.xda-developers.com/showthread.php?t=1832326
to others informations
Samsung Galaxy S III/GT-I9300 - Wiki - look this ... many and good links - how to install , root, recover , etc ...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
best regards
srinivasmv419 said:
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
Click to expand...
Click to collapse
if you did the following I am not sure how to help:
format system, data, cache etc. (best I guess would be to do a mega wipe)
flash slim
without reboot flash slim gapps
wipe cache, dalvik (just to be sure)
fix permissions (normally not necessary)
reboot
jpopsukibr said:
hi dude,
to do wipe read this:
[Tool][Aroma]:Mega Wipe:Super Wipe:Factory Reset:Simple Wipe::For Flashaholics
http://forum.xda-developers.com/showthread.php?t=1832326
to others informations
Samsung Galaxy S III/GT-I9300 - Wiki - look this ... many and good links - how to install , root, recover , etc ...
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_III/GT-I9300
best regards
Click to expand...
Click to collapse
Yes i use mega wipe sometimes too , but when you have a problem , it's better to do it manually,..
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 01:37 PM ---------- Previous post was at 01:34 PM ----------
srinivasmv419 said:
update -- jus now flashed stock firmware,n everything fine.
tel frens wat to do now..
Click to expand...
Click to collapse
chrismast said:
if you did the following I am not sure how to help:
format system, data, cache etc. (best I guess would be to do a mega wipe)
flash slim
without reboot flash slim gapps
wipe cache, dalvik (just to be sure)
fix permissions (normally not necessary)
reboot
Click to expand...
Click to collapse
Follow this. .. but don't use mega wipe now. . Do it manually and flash again. . If it doesn't work, . You use mega wipe and try again.
Sent from my GT-I9300 using Tapatalk 2
well have to tel one imp thing.last week i flashed slimrom build 6 which al went well.but due to some reasons i deleted n flashed stock rom agan
but last night i flashed build 6.2 slimrom.here i have done other job too while flashing slimrom build 6.2
i formatted everything in recovvery mode..n flashed slimrom then without reboot gapps too
also flashed BOEFFLA KERNEL WITHOUT REBOOT
is thhis the BLUNDER I HAVE DONE.only for this reason am not able to boot into slimrom??pls tel
HAPPY UPDATE- this time flashed stable build 6 with da above said instructions.with FIX PERMISSIONS.
donno if its wrong wth 6.2 weekly bui;d or wat else..but finally flashed SLIMROM SUCCESSFULLY.happy now
thanks lottt
Boeffela does not support aosp of I am not wrong, here you got your boot loop
Sent from my GT-I9300 using xda app-developers app
galaxys3lover said:
Yes i use mega wipe sometimes too , but when you have a problem , it's better to do it manually,..
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 01:37 PM ---------- Previous post was at 01:34 PM ----------
Follow this. .. but don't use mega wipe now. . Do it manually and flash again. . If it doesn't work, . You use mega wipe and try again.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
srinivasmv419 said:
well have to tel one imp thing.last week i flashed slimrom build 6 which al went well.but due to some reasons i deleted n flashed stock rom agan
but last night i flashed build 6.2 slimrom.here i have done other job too while flashing slimrom build 6.2
i formatted everything in recovvery mode..n flashed slimrom then without reboot gapps too
also flashed BOEFFLA KERNEL WITHOUT REBOOT
is thhis the BLUNDER I HAVE DONE.only for this reason am not able to boot into slimrom??pls tel
HAPPY UPDATE- this time flashed stable build 6 with da above said instructions.with FIX PERMISSIONS.
donno if its wrong wth 6.2 weekly bui;d or wat else..but finally flashed SLIMROM SUCCESSFULLY.happy now
thanks lottt
Click to expand...
Click to collapse
chrismast said:
Boeffela does not support aosp of I am not wrong, here you got your boot loop
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
yes, I do agree with @galaxys3lover. Automatic scripts are goods, but in this particular case a manual wipe was better.
i am a lill paranoic ... i do "erase everything" before install a new rom, and I try follow the developer instructions (if he say ... full wipe is the recommended ... yeah .. i will do ... if we will have fc or problems or strange things... no regrets ... lol)
@chrismast i was reading the slim rom thread and in instructions:
"From another JB or ICS Rom to SlimBean
Download device_x.x.zip, slim_gapps.zip.
Enter CWM, wipe data, format system ( in mounts and storage)
Flash Device_x.x.zip***, then MUST flash slim_gapps.zip (other files optional)
*** - If the flash is too quick ( < 5 seconds or so), reflash device before flashing common or other zip files."
*** i do really doesn't understand this 5 secs ... some other xda slim user could bring us a enlightment for this question. maybe a slim cm aosp based rom particular issue? i don't know
"Upgrading Slim Bean
Unless we specify otherwise in changelog
Reboot to recovery, wipe cache, dalvik cache then just flash your device zip."
and the 4.2.2 Build 6 ChangeLog
"Attention:
Due to the updated TRDS 2.0 code, you HAVE TO download and flash the new gapps packages this time."
references
http://slimroms.net/index.php/installation
http://slimroms.net/index.php/changelog
maybe a "forget step"? or the problem was related to Boeffla Kernel
"Note: This kernel is only for Samsung based Jelly Bean (Android 4.1.x) roms!!! Do not install it on CM or AOSP based roms!!!
Also do NOT install it on any Samsung 4.2.x based Roms!!! You will just get a boot loop!!!" - a quote of @AndiP - red color is not mine ... lol
[KERNEL] [Samsung JB] Boeffla-Kernel 2.11 (21-05-2013)
http://forum.xda-developers.com/showthread.php?t=1964572
and i am happy that you did flashed successfully slim rom and the other xda members did helped you
:good:
best regards guys
even oreyang
chrismast said:
Boeffela does not support aosp of I am not wrong, here you got your boot loop
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Not at all, i will share personal experience.
Few days ago... I flashed SlimRom and everything was OK, however, due to not reading and having an anxiety about having Boeffla, i flashed Boeffla from CWM and i get a Soft Brick but thank i had battery, i could revive via Back up and Restore (NAndroid).
Conclusion: Boeffla do not support AOSP nor AOKP
"would appreciate correct me if I am wrong, if not, also let me know" :good:
Hi
Have a Samsung Galaxy Tab 2 GT-P7510 ICS 4.0.4
I have problem With streaming video With Youtube app. It stops all the time ( I had the same problem With My Note N7000 when on ICS, but after jb update I had no problems With streaming videos). So I think I have to get JB on my Tab. But Stock rom does not come higher than ICS.
So I have to find a custum Rom.
Also want less laging
I want a JB custum rom based on touchwiz. I cant find one. Can somebody help here. Is there a custum rom JB/Touchwiz for the gt-p7510?
tkolst said:
Hi
Have a Samsung Galaxy Tab 2 GT-P7510 ICS 4.0.4
I have problem With streaming video With Youtube app. It stops all the time ( I had the same problem With My Note N7000 when on ICS, but after jb update I had no problems With streaming videos). So I think I have to get JB on my Tab. But Stock rom does not come higher than ICS.
So I have to find a custum Rom.
Also want less laging
I want a JB custum rom based on touchwiz. I cant find one. Can somebody help here. Is there a custum rom JB/Touchwiz for the gt-p7510?
Click to expand...
Click to collapse
Do you have a tab2 or a p7510..because the p7510 is the tab 1 10.1 Wi-Fi only
GT-P7510
Gil81 said:
Do you have a tab2 or a p7510..because the p7510 is the tab 1 10.1 Wi-Fi only
Click to expand...
Click to collapse
First of all thank You for responding to my thread )
Ok thanks alot for the info
tkolst said:
First of all thank You for responding to my thread )
Ok thanks alot for the info
Click to expand...
Click to collapse
No problem... give me a holler if you need any help with a custom rom( if you go that way )..
touchwiz based custum rom jelly bean?
Gil81 said:
No problem... give me a holler if you need any help with a custom rom( if you go that way )..
Click to expand...
Click to collapse
Ok
1) I can t find any touchwiz based roms With jelly bean for my tablet. Is this a no go? Does this not exist?
2) If this is not available. Do you know of a popular custum rom based on jelly bean.?
3) I have read that this one is suggested In a thread : http://forum.xda-developers.com/showthread.php?t=2061080
the roms thread: http://forum.xda-developers.com/showthread.php?t=2065201 But is this for gt-p7510? can not find that it is
feel free to answare me 1),2),3) or just give another answere
Thanks !
tkolst said:
Ok
1) I can t find any touchwiz based roms With jelly bean for my tablet. Is this a no go? Does this not exist?
2) If this is not available. Do you know of a popular custum rom based on jelly bean.?
3) I have read that this one is suggested In a thread : http://forum.xda-developers.com/showthread.php?t=2061080
the roms thread: http://forum.xda-developers.com/showthread.php?t=2065201 But is this for gt-p7510? can not find that it is
feel free to answare me 1),2),3) or just give another answere
Thanks !
Click to expand...
Click to collapse
Well.. the JB touchwiz based rom is out... since this device never had a JB rom released..
There are a ton of JB roms in the development thread
I'm running 4.3 right now... but our base for these roms will always be cm/aosp/aokp based...
---------- Post added at 12:31 PM ---------- Previous post was at 12:25 PM ----------
@tkolst
Type you're device into the find device search bar...if you do indeed have a p7510 Wi-Fi only galaxy tab 10.1...
Go to that page and you will see two development threads... 10.1 and 10.1v..which one you need depends on you're device..
If you have anymore questions... don't hesitate to ask..
10.1 and 10.1v difference?
Gil81 said:
Well.. the JB touchwiz based rom is out... since this device never had a JB rom released..
There are a ton of JB roms in the development thread
I'm running 4.3 right now... but our base for these roms will always be cm/aosp/aokp based...
---------- Post added at 12:31 PM ---------- Previous post was at 12:25 PM ----------
@tkolst
Type you're device into the find device search bar...if you do indeed have a p7510 Wi-Fi only galaxy tab 10.1...
Go to that page and you will see two development threads... 10.1 and 10.1v..which one you need depends on you're device..
If you have anymore questions... don't hesitate to ask..
Click to expand...
Click to collapse
Thanks alot mate !
I am not sure what v stands for. 10.1 v is Google io . I think I have the 10.1. But how am I to be sure?
this is what I could find about my tablet: buildnumber: IMM76D.XWLP5 KERNEL: 3.1.10-1100466
and are you happy With the 4.3 rom you are using? is it stable?
Is it this one youve got? http://forum.xda-developers.com/showthread.php?t=2411081
update: i know read this is the v Version(refering to Your rom)
v is p7100
Gil81 said:
Well.. the JB touchwiz based rom is out... since this device never had a JB rom released..
There are a ton of JB roms in the development thread
I'm running 4.3 right now... but our base for these roms will always be cm/aosp/aokp based...
---------- Post added at 12:31 PM ---------- Previous post was at 12:25 PM ----------
@tkolst
Type you're device into the find device search bar...if you do indeed have a p7510 Wi-Fi only galaxy tab 10.1...
Go to that page and you will see two development threads... 10.1 and 10.1v..which one you need depends on you're device..
If you have anymore questions... don't hesitate to ask..
Click to expand...
Click to collapse
Think I got it. 10.1v is p7100 and p7510 is just 10.1
tkolst said:
Thanks alot mate !
I am not sure what v stands for. 10.1 v is Google io . I think I have the 10.1. But how am I to be sure?
this is what I could find about my tablet: buildnumber: IMM76D.XWLP5 KERNEL: 3.1.10-1100466
and are you happy With the 4.3 rom you are using? is it stable?
Is it this one youve got? http://forum.xda-developers.com/showthread.php?t=2411081
update: i know read this is the v Version(refering to Your rom)
Click to expand...
Click to collapse
This is the 10.1 rom I'm currently running... http://forum.xda-developers.com/showthread.php?t=2098429
I have run the one you linked to... but it was an earlier build and a little unstable... but I here good things about it now..
But I love the rom I'm on now, so that's why I've stayed with it... super smooth and fast on my device.. but let me tell you........
Not all devices are equal...in other words. What runs great for me, might not for you.
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
tkolst said:
Think I got it. 10.1v is p7100 and p7510 is just 10.1
Click to expand...
Click to collapse
Yep... yep.. good searching.. keep at it. That is what makes a good member..
But don't be afraid to ask questions if an answer is not clear..
allshare cast
Gil81 said:
This is the 10.1 rom I'm currently running... http://forum.xda-developers.com/showthread.php?t=2098429
I have run the one you linked to... but it was an earlier build and a little unstable... but I here good things about it now..
But I love the rom I'm on now, so that's why I've stayed with it... super smooth and fast on my device.. but let me tell you........
Not all devices are equal...in other words. What runs great for me, might not for you.
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
Yep... yep.. good searching.. keep at it. That is what makes a good member..
But don't be afraid to ask questions if an answer is not clear..
Click to expand...
Click to collapse
sorry to piggy back here but this seemed current and active, i am actually looking for the exact same thing, but specifically for allshare cast to work with the dongle. recently sold my s3 but i would like to keep using the adapter to fling video to my tv, but the only samsung device i have currently is my p7510, i dont even remember what rom i have on it it's been so long since i rooted it, and the battery is dead currently, but i was under the impression that only jb touchwiz was compatible with the allshare cast .apk if iinstalled properly (and any rom with this built in would be super) first noob post here (finally) thanks everyone for all the advice over the years
With regards to Youtube, take a look at my post under "Common problems on stock 4.0.4" here: http://forum.xda-developers.com/showthread.php?t=2458846
Sent from my GT-P7510 using Tapatalk
[Q&A] [ROM] [AOSPA] [OFFICIAL] [DISCUSSION] ParanoidAndroid 4.6 BETA 5 [4.4.4] [GT-I
Q&A for [ROM] [AOSPA] [OFFICIAL] [DISCUSSION] ParanoidAndroid 4.6 BETA 5 [4.4.4] [GT-I9100]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [AOSPA] [OFFICIAL] [DISCUSSION] ParanoidAndroid 4.6 BETA 5 [4.4.4] [GT-I9100]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i don't find developer option.. where is it?
edit. Sorry, i've writed in the wrong topic
---------- Post added at 06:18 PM ---------- Previous post was at 06:09 PM ----------
i don't find developer option.. where is it?
how about Cyanomod 11 M11 or the cm nightly versions?
illuminate buttons....
um. the Backlight is disabled.. but it does not work...
Dynamic navigation bar has been removed in the latest update cant find it in settings--->Buttons anymore as it was available in previous builds. Would love to have it in I9100.
---------- Post added at 05:43 AM ---------- Previous post was at 05:39 AM ----------
I would like to know the kernel needed to run this PA 4.6 .. I'm using Dormianx kernel where I'm not getting the optimum needed battery life .. My wifi is on all the time and I think that this rom is causing me some serious partial wakelocks i cant really find solution for wakelocks. Is this because of kernel or because of the build being a beta version. My battery was reduced to 10% from 35% without being used .. Suggest some solutions for this if any other kernel or anything else.
---------- Post added at 05:55 AM ---------- Previous post was at 05:43 AM ----------
wiking76® said:
i don't find developer option.. where is it?
edit. Sorry, i've writed in the wrong topic
---------- Post added at 06:18 PM ---------- Previous post was at 06:09 PM ----------
i don't find developer option.. where is it?
Click to expand...
Click to collapse
TO enable developer options go to settings --> About Phone and Click 7 times on "Build Number"
Now go back to settings and scroll down to find developer options !!
Hi, I'm trying to flash my s2 with this rom having never done anything like this before.
I'm stuck at the first hurdle in that I can't get CWM on to my phone, it's still using the stock android recovery - I've read guides and found that I first need to install CWM JB 6.0.2.9 and then upgrade from there to install kitkat roms - however every single link I can find for the 6.0.29 version of CWM is dead....
Does any one know of a mirror?
thanks.
thanks man
It's true........
Rkr87 said:
Hi, I'm trying to flash my s2 with this rom having never done anything like this before.
I'm stuck at the first hurdle in that I can't get CWM on to my phone, it's still using the stock android recovery - I've read guides and found that I first need to install CWM JB 6.0.2.9 and then upgrade from there to install kitkat roms - however every single link I can find for the 6.0.29 version of CWM is dead....
Does any one know of a mirror?
First you need to install the cwm 6.0.4.5+ to install Kikat roms so .. download the needed cwm's from here http://galaxys2root.com/cwmtwrp-recovery and flash the zip file, reboot the recovery and now you will find the needed recovery confirm it by checking the version it should be 6.0.4.5 or above .. Now you can flash the PA 4.6 beta 5 and gapps successfully You can also use
files to flash from odin if youre bricked and cant get into cwm now !!!!
Click to expand...
Click to collapse
Hi, which version of Dorimanx's kernel should I use with 4.6 beta5? I don't know how to find out whether this rom is using mali drivers v2 or v3 or whatever.
Thanks in advance
DanielM998 said:
Hi, which version of Dorimanx's kernel should I use with 4.6 beta5? I don't know how to find out whether this rom is using mali drivers v2 or v3 or whatever.
Thanks in advance
Click to expand...
Click to collapse
You can download the latest from here : http://www.dorimanx.com/beta-test/
Well, yeah, not knowing where to download from wasn't exactly my problem. I was asking if I should download dorimanx v10 or v9
DanielM998 said:
Well, yeah, not knowing where to download from wasn't exactly my problem. I was asking if I should download dorimanx v10 or v9
Click to expand...
Click to collapse
Well I used v9 and didnt find any problems with it !!! I just downloaded v10 and will check if this is fine too !! But you can follow on with v9 for now
I found a problem that application like xplore or zarchiver not extracting zip files fully it totally stuck in some times...
When phone is restarted all settings are restored...
NFS most wanted freezes whole phone when playing...
Any solution?
I've installed this ROM and extended the internal memory to 12GB with a pit file. This is my first installed ROM on a S2.
The ROM works fine, but there are two bugs that need to be fixed.
1. I can't enter the camera, I received the message "Unfortunately, Camera has stopped"
2. When I go to the Gallery I received the message "No external storage available". I can't even take a screenshot.
Please help a beginner solve these problems. Thanks!
My Samsung Galaxy S II LTE I9210 (SHV-e110s) Wifi Not Working after custom rom
I am Having Samsung Galaxy S2 SHV-E110s . I Have issues of WIfi,hotspot and gps in all 4.4 android roms dirty unicorn 4.4.2 ,dirty unicorn 4.4.4,paranoid 4.4 fianl,paranoid 4.6 beta 5!! Any Solution
ArnavAkarsh said:
I am Having Samsung Galaxy S2 SHV-E110s . I Have issues of WIfi,hotspot and gps in all 4.4 android roms dirty unicorn 4.4.2 ,dirty unicorn 4.4.4,paranoid 4.4 fianl,paranoid 4.6 beta 5!! Any Solution
Click to expand...
Click to collapse
bro check hardware this is hardware issues
Any idea why i cant install dorimanx kernel with this rom?already tried v8, v9, v10 still got the same result..its only stuck on dorimanx boot logo.. :/ anyone can help?
Working fine
Hello, I've been using this ROM for a while.
Problems:
Camera works once a while only
Automatic freeze once in a while [to get back, I've to remove battery]
Other than that, everything is smooth. Thanks!
PS: If there's solution for above that i don't know, kindly tell me
jaswinprakash said:
I found a problem that application like xplore or zarchiver not extracting zip files fully it totally stuck in some times...
When phone is restarted all settings are restored...
NFS most wanted freezes whole phone when playing...
Any solution?
Click to expand...
Click to collapse
That has been a problem with all roms for the SII for a while. Large file operations freeze the device sometimes. Not sure if it's fixed by now in other roms, but for PA it will never get fixed, it seems.
Can I get it rooted
Why isn't this rom rooted? How can i root it?
---------- Post added at 07:37 PM ---------- Previous post was at 07:31 PM ----------
How can I root this ROM? It isn't rooted on my phone.