Hi guys,
First of all, i'm new here and from holland, so i'm sorry if my english is hard to understand.
I searched the forum but i only got three result and none of them worked
I used the tutorial that i found by google on this site.
i followed it perfectly but each time i want to start odin it stalls at "Get PIT for mapping" the file i filled in by "pda" is CF-Root-SGS3-v6.4
Tried an other usb port and pulled the batt but nothing worked, in downloading mode nothing happends at all
My pc runs XP
Anyone can help me please?
Podívat zde:
http://forum.xda-developers.com/showthread.php?t=1695238
---------- Post added at 01:15 PM ---------- Previous post was at 01:14 PM ----------
http://forum.xda-developers.com/showthread.php?t=1701770
misacek said:
Podívat zde:
http://forum.xda-developers.com/showthread.php?t=1695238
Click to expand...
Click to collapse
this is what i did
Long:
- Follow these instructions to the letter. Do not touch any buttons or checkboxes that are not listed below to touch!
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Root-SGS3-vX.X.zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Root-SGS3-vX.X.tar
- Put your phone in download mode (turn off phone, then hold volume-down + home + power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
Me too it was not until the fifth attempt succeeded.
misacek said:
Me too it was not until the fifth attempt succeeded.
Click to expand...
Click to collapse
tried it like 10 times
odin 1.85 and odin 3.04
CF-Root-SGS3-v6.4
CF-Root-SGS3-v6.3
Nothing works...
http://forum.xda-developers.com/showthread.php?t=1671969
Here you find the drivers and try it out.
misacek said:
http://forum.xda-developers.com/showthread.php?t=1671969
Here you find the drivers and try it out.
Click to expand...
Click to collapse
You don`t need samsung kies?
Kies also install drivers or drivers only.
misacek said:
Kies also install drivers or drivers only.
Click to expand...
Click to collapse
I dont have kies or other drivers...
I'm installing kies right now
with kies installed but not running:
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
turn off all processes kies and again in Odin cf-root 6.4 kernel tar.
Checklist usual suspects .
International I9300 only .
Samsung USB Drivers .
Samsung USB Cable .
KIES |Not running .
Using motherboard USB port .
Redownloaded file .
jje
misacek said:
turn off all processes kies and again in Odin cf-root 6.4 kernel tar.
Click to expand...
Click to collapse
closed kies and kiestrayagent
same result
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JJEgan said:
Checklist usual suspects .
International I9300 only .
Samsung USB Drivers .
Samsung USB Cable .
KIES |Not running .
Using motherboard USB port .
Redownloaded file .
jje
Click to expand...
Click to collapse
where can i find this?
Rooted_S3 said:
where can i find this?
Click to expand...
Click to collapse
What is this ???????
jje
JJEgan said:
What is this ???????
jje
Click to expand...
Click to collapse
International I9300 only . where can i find that?
That's your phone.
I hope you are using the International Siii
Sent from my Samsung Galaxy S3
Try running Odin as administrator if you aren't already
slaphead20 said:
Try running Odin as administrator if you aren't already
Click to expand...
Click to collapse
i'm already admin
Where can i see witch s3 i have?
Rooted_S3 said:
i'm already admin
Where can i see witch s3 i have?
Click to expand...
Click to collapse
settings/about device/model number
slaphead20 said:
settings/about device/model number
Click to expand...
Click to collapse
this is the number
GT-9300
Related
Hi, I have been trying to flash my phone with cf-root from this thread - http://forum.xda-developers.com/showthread.php?t=1103399
I have been following the instructions to the letter, downloaded Odin, downloaded the Kernel for my phone, downloaded latest drivers for my phone and ensured all Kies processes are shut down. However every time I try and flash my phone from Odin, it comes up with the following message -
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1)
Any help on what to do? it would be greatly appreciated.
Cheers.
Mine also failed with same reason...someone pls help!
KG2 Hong Kong firmware
Sent from my GT-I9100
Have u put the phone in download mode?
Volume down + menu + power on
Yes I have been putting the phone in download mode, been following the instructions to the letter, I have uninstalled and reinstalled Odin, downloaded the kernel again, still no luck...
You are flashing the correct firmware for T model ???
jje
In all honesty I am not sure if there is some specific firmware for the T model, I have been using KF4 during all these attempts. Is there a specific firmware for the T model?
Any more suggestions on what I could do to sort it out?
JJEgan said:
You are flashing the correct firmware for T model ???
jje
Click to expand...
Click to collapse
"T" model firmware is identical save for the modem. If you have a T model you can use any rom as long as you reflash correct modem.
I'd guess OP isn't in download mode lol
Sent from my GT-I9100 using Tapatalk
No, I am putting my phone into download mode (vol down+home+power), doing everything the instructions for this cf-root say, and this keeps happening...
I just checked again, and even when not plugged into the computer, in download mode it has some small writing at the top left of phone saying "Odin Mode", should this be there when not plugged in?
I just checked again, and even when not plugged into the computer, in download mode it has some small writing at the top left of phone saying "Odin Mode", should this be there when not plugged in?
A guess is that you are not following the instructions regarding the cwm root rom file .
Flash CF-Root-xxx-vX.X.tar (from the attached zip)
Of course it could be that you have extracted the tar file from the zip and its faulty .
jje
well, I have just downloaded it again, unzipped the .tar and tried again, same result..
On phone make sure Settings / Development is checked to USB debugging on.
I'm in the same boat.
I'm trying to root the phone so that I can install the original SIP service to enable VoIP calls as per this thread here so I have been reading up for most of the day (yeah I know stressing out and being over pedantic) Have been reading Chainfire's thread as well as "http://forum.xda-developers.com/showthread.php?t=1126522A complete noobs guide to root using the [CF-Root v4.0] KE2/7/8, KF1 su+bb+CWM4"
And was following it to a T up to step 15... My Odin message stays on:
Screenshot here
Uploaded with ImageShack.us
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
And has been like this for 5 minutes..I don't know what to do if I can reset or if that will damage the phone... so desperately looking for answers!
My worst fears are happening right now guys..trying not to panic.
I Downloaded and used CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4 and my screenshots from my phone are here to compare that I am using the correct one.
Uploaded with ImageShack.us
What to do!?
Thanks!
Restart Odin unplug phone etc start again make sure you are putting a tar file in to PDA .
jje
JJEgan said:
Restart Odin unplug phone etc start again make sure you are putting a tar file in to PDA .
jje
Click to expand...
Click to collapse
I am loading a tar file, check the screenshot...
Tried it again and the same thing happens...just hangs there.
How do I get out of download mode?
Screen shot unreadable
Remove battery .
#
jje
Open device manager. Can you see this when the phone is connected in Download Mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have flashed my GT-i9100T many times using Odin. Successful every time. Maybe try a different computer? Use Heimdall? Make sure you check your MD5 sums
Ok thanks guys, so far my original issue has been fixed, phone had USB-debugging off, turned it on, now Odin at least tries to do it's thing, however now I have this error message coming up:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
For Device Manager screenshot
h**p://img197.imageshack.us/img197/1298/unled12x.jpg
What do you mean the previous screenshot is unreadable...you have to click it and then click again yes?
Thanks for helping guys, appreciate it
Still having no luck here guys, any more suggestions worth trying?
Dear All Experts,
Please help.................
My Galaxy S2 GT-I9100G stuck in Odine while upgrading...... new to this Forum also for S2... Please help
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
<ID:0/003> MLO
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
well my guess is if you have kies installed then run taskman and stop it and try again . if it fails again then try to download new pack of that ROM if stoping kies did't help you !!
you can download Process hacker which is better then taskman
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and now click on thanks buttion newbie
apk_xiz said:
well my guess is if you have kies installed then run taskman and stop it and try again . if it fails again then try to download new pack of that ROM if stoping kies did't help you !!
and now click on thanks buttion newbie
Click to expand...
Click to collapse
Not installed Kies on system.......... plz guide
possibly kies at fault, or drivers from other mobile phones, make sure ya uninstall kies and anything thats not related to your phone that you dont need.
2nd cause could be quite often people dont have their cable plugged directly into a usb2 port, being plugged into a usb hub or the extra usb ports, cards etc can cause issues with odin, please check and ensure you are in a usb2 port on the back of the pc, if one isnt spare make one spare, for example, a usb mouse really doesnt need to be in a usb2 port, that could be moved.
Good luck and i hope you manage to nail down the issue, once its solved odin will work fine.
http://forum.xda-developers.com/showthread.php?t=1619571
Take a look at this
hi
i check my cable.
i uninstalled kies, but its drivers.
i connect it to my laptop directly.
and nothing happened.
what must i do?
Google search 'Windoze I9100' (or try Hopper's 'Odin won't work' thread).
Flash jb leak and get this over with.
http://www.sammobile.com/2012/11/15/i9100xxlsj-–-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
That's:
PDA : LSJ
PHONE : LS6
CSC : LS1
Edit: THIS WILL BRICK YOUR DEVICE and it will make it burn in flames.
Edit 2: hopper, we really gotta quit drinking, the OP is from last year
Sent from the little guy
@gastonw, did you see he had an i9100g??... Surely that jb leak won't work on an i9100g, unless there's some magic trick the leak has that I don't know about?
EDIT: OP, don't flash that file that Gaston linked. (nothing personal Gaston )
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Oh crap, my bad.
@ OP listen to hopper, I was never here.
Edit: Same as above, a new user bumped this thread, not the OP.
Sent from...this is not even my S2
you have uninstalled the samsung kies, did you reinstall the device driver and rebooted you laptop?
try rebooting it first, then unplug your USB cable and plug it to a different port.
If it is still not working, try downloading a different official firmware....
hi
@MistahBungle: i don't find any useful thing. can you give me link?
@[email protected]: i do all of that, but changing firmware. i'll do that today.
@gastonw: what i must do? go on it or not? i have I9100.
thanks.
Lol this thread is a mess, sorry about that.
I9100? go for it, flash JB leak as I posted earlier.
Sent from the little guy
You obviously didn't do that exact Google search if you 'don't find any useful thing'. It's still top of the results when you do that exact search.
Re: Hopper8's thread, no, I don't have a link, and I'm absolutely not searching for the thread for you when you're more than capable of doing so yourself (Search through his posts only, you should find it easily), tho I have my doubts about that given you obviously didn't bother doing a two word Google search (In other words, you can do either/both of those things & maybe fix your phone or it can stay busted, doesn't bother me in the slightest either way).
Google it and download kies and Samsung drivers and change your use cable might it will work
Sent from my GT-I9100 using xda premium
Is every post you make to every thread going to be a rehash of what the person needing help has either already tried (and said they've already tried) or what other people have already suggested they try ? (Has been so far).
gauravgymnast08 said:
Google it and download kies and Samsung drivers and change your use cable might it will work
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
if it is still not working, try looking at your charging pin (Phone usb charging pin) if it is dirty get a dry tooth brush, remove your battery and get an acetone, put atleast two drops and brush it to the charging pin.... it could be the pin doesnt get contact well on your USB cable ( no matter how many times you change your USB cable if your charging pin has problems due to dirts, still it will do same thing.) leave it to dry well before putting back the battery.
download a different firmware, and do not download samsung kies. just get the device driver for samsung mobile phones ok....
Put back your battery and then do the combination for the download mode and flash it to ODIN....
tell me if it still doesnt work....
i experienced many failed attempts on SAMSUNG galaxy, Galaxy S2, Nexus G, Xperia acro s, Xperia sola.... so it's quite impossible that it was your phone has the issue.... BTW what happened to your very first trial of flashing that phone of yours, why did you flash a different firmware....
try everything, just keep trying it will eventually work.... if not, only one way to make it work. JTAG to one of the cellphone shops if there's any in your country....
oh yeah one more thing, try a different computer/ laptop to flash it with.... just copy every thing to a flash drive because it could be your computer too....
@MistahBungle: do you mean this? http://forum.xda-developers.com/showthread.php?t=2345831 it haven't any "windoze" word
@[email protected]: i tried another laptop too. nothing happened. (but i'm downloding another rom for test it too, and will wash it with brush)
hnikaein said:
@MistahBungle: do you mean this? http://forum.xda-developers.com/showthread.php?t=2345831 it haven't any "windoze" word
@[email protected]: i tried another laptop too. nothing happened. (but i'm downloding another rom for test it too, and will wash it with brush)
Click to expand...
Click to collapse
tell me if it works flashing a different official rom and brushing it with a dry brush....
@gastonw , @[email protected]
i use .pit file from odin package from here:
http://forum.xda-developers.com/showthread.php?t=1619571
(http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576)
and use odin 3.07
now, odin not stuck in mlo, and do work completely and say pass. but after reseting, my s2 stuck in boot with yellow triangle. what i must do?
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
It killed my lat phone, I thought, but when I removed the SD card where it was installed all came good!
Sent from my GT-I9300 using Tapatalk 2
I had already removed my SD card and SIM already. Thanks for advice mate.
yogioz said:
It killed my lat phone, I thought, but when I removed the SD card where it was installed all came good!
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I'm not sure if this will help
try this
download this http://forum.xda-developers.com/showthread.php?t=2002953
and flash via ODIN
and then in recovery format completetly everything DATA,INTERNAL SD CARD ,SYSTEM
then try to flash stock firmware using ODIN
---------- Post added at 06:31 AM ---------- Previous post was at 06:28 AM ----------
here is the stock firmware http://www.multiupload.nl/T7T4JCNKHS
abelle_abelle said:
I'm not sure if this will help
try this
download this http://forum.xda-developers.com/showthread.php?t=2002953
and flash via ODIN
and then in recovery format completetly everything DATA,INTERNAL SD CARD ,SYSTEM
then try to flash stock firmware using ODIN
---------- Post added at 06:31 AM ---------- Previous post was at 06:28 AM ----------
here is the stock firmware http://www.multiupload.nl/T7T4JCNKHS
Click to expand...
Click to collapse
tried it, but no luck~~~
Thanks mate
Did you use the correct PIT file ???
jje
JJEgan said:
Did you use the correct PIT file ???
jje
Click to expand...
Click to collapse
i have tried all 3 pit.file. How do I know am i using the correct PIT file or not?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
kk12175 said:
i have tried all 3 pit.file. How do I know am i using the correct PIT file or not?
GT-I9300_mx_20120220.pit
GT-I9300_mx_20120322.pit
GT-I9300_mx_20120329.pit
Click to expand...
Click to collapse
I did the same, and tried to fix in the same way ~4 weeks ago. Its back in the post from samsung and should arrive today having been repaired.... Sorry!
They have had to replace parts (took them two attempts with different bits apparently), but dont give any more details than that.
kk12175 said:
i have tried all 3 pit.file. How do I know am i using the correct PIT file or not?
Incorrect PIT may brick your phone .
This needs a service centre repair .
jje
Click to expand...
Click to collapse
I had some surprised after I have tried to recover my phone again today...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
The custom binary download counter from 「2x」to (No), is that mean it back to zero? Do you guys think I can give it a go to samsung warranty center?
Sent from my GT-N7000 using xda app-developers app
Flash via "Firmware Upgrade And Initialization" in the "Tools" of Samsung KIES 2.5 instead of ODIN. The firmware must fit your phone because it get firmwares according to your serial number. However, if you find firmwares outside, there may be a little difference due to different batches.
But my phone just couldn't boot up, it held on the screen of "samsung" logo, so I couldn't connect to kies at all
Sent from my GT-N7000 using xda app-developers app
kk12175 said:
But my phone just couldn't boot up, it held on the screen of "samsung" logo, so I couldn't connect to kies at all
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
You don't have to boot up your phone in order to use the "Firmware Upgrade and Initialization" in the Samsung KIES.
Thanks for your advice mate, I tried, but still no luck, what happen was my PC can pickup the connection of my phone, but once Kies sending data into the phone, it just became fails and has to be disconnect. I tried to reconnect and ran through it again.. no good. Now, I am planning to give a soft electric shocks, and make it go into dead sleep, so that I can take it to service center. Before that, any other think I can try?
Thanks mate.
Sent from my GT-N7000 using xda app-developers app
kk12175 said:
Thanks for your advice mate, I tried, but still no luck, what happen was my PC can pickup the connection of my phone, but once Kies sending data into the phone, it just became fails and has to be disconnect. I tried to reconnect and ran through it again.. no good. Now, I am planning to give a soft electric shocks, and make it go into dead sleep, so that I can take it to service center. Before that, any other think I can try?
Thanks mate.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
That means you failed to use the download mode which supports the "Firmware Upgrade and Initialization" right?
But electric shocks is not a good way as they may discover you.
Yes, I think so, I can connect the phone to Kies, after Lies finished download firmware and ready to flash, it kicked me out and asked me to disconnect the phone.
Except using electric shocks, I can't think of any other ways as I think I have tried everything. Any other method I can try?
Sent from my GT-N7000 using xda app-developers app
Hi, I have the same problem!
Has anyone found a solution yet?!
Hello,
I need some help please.
Yesterday i tried to root my SGS2 i9100G (2.3.6) using Odin fut it failed and the phone restarted with a yellow triangle.
So after reading a few threads here, i tried to restore with a 4.1.2 firmware using Odin and it failed again.
Then it was stuck with
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So I downloaded the firmware I had which is I9100GXXLB1_I9100GATOKL1_ATO
but Odin keeps failing :
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLB1_I9100GATOKL1_I9100GXXKL4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> cache.img
<ID:0/008> NAND Write Start!!
<ID:0/008> factoryfs.img
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
Please help me, I have to fix this ASAP.
Thanks
why don't you try with cf root via recovery?
1) Calm down. People will help you when they get the chance & not before. You do realise most of the people here are in timezones where it's still early AM, don't you ?
2) 'Odin won't work' gets covered here all the time. There are a set of troubleshooting steps you need to go through. Find similar threads, go through the steps.
wishmas7er said:
why don't you try with cf root via recovery?
Click to expand...
Click to collapse
I don't know how to do that
MistahBungle said:
1) Calm down. People will help you when they get the chance & not before. You do realise most of the people here are in timezones where it's still early AM, don't you ?
2) 'Odin won't work' gets covered here all the time. There are a set of troubleshooting steps you need to go through. Find similar threads, go through the steps.
Click to expand...
Click to collapse
I read all the threads I found concerning this error.
Should I try to tick also Re-Partition with a PIT in Odin?
If yes, where can I find this PIT file?
kinder771 said:
I read all the threads I found concerning this error.
Should I try to tick also Re-Partition with a PIT in Odin?
If yes, where can I find this PIT file?
Click to expand...
Click to collapse
No. Don't flash a .pit unless you are CERTAIN it will succeed. Ask yourself this: if Odin won't succeed flashing a ROM, why would it flash a .pit successfully? If the pit file fails, your phone will need a new motherboard. End of story.
What MistahBungle was referring to are troubleshooting steps for when an Odin flash fails. Google 'windoze i9100'. Read the first result (xda thread) and follow the steps MistahBungle posts there.
Hahaha Amazing. That Google search has a thread I posted to as the top result.
MistahBungle said:
Hahaha Amazing. That Google search has a thread I posted to as the top result.
Click to expand...
Click to collapse
Maybe because of all the times I've searched it?
Here you go Bungle: all of those results have some sort of your list. Some versions more complete than others. But I can say you have clear domination of Google search results on the topic also note 'You've visited this page many times'
Yeah I saw, when you mentioned it I did a search. That definitely means it shouldn't be necessary for anyone to post them again.
Hopper8 said:
No. Don't flash a .pit unless you are CERTAIN it will succeed. Ask yourself this: if Odin won't succeed flashing a ROM, why would it flash a .pit successfully? If the pit file fails, your phone will need a new motherboard. End of story.
What MistahBungle was referring to are troubleshooting steps for when an Odin flash fails. Google 'windoze i9100'. Read the first result (xda thread) and follow the steps MistahBungle posts there.
Click to expand...
Click to collapse
Is it a difference if I have a i9100G?
kinder771 said:
Is it a difference if I have a i9100G?
Click to expand...
Click to collapse
when it comes to pit file's ,YES
Sun90 said:
when it comes to pit file's ,YES
Click to expand...
Click to collapse
Just to clarify, the troubleshooting steps still apply. Sun90 is meaning that if you were to flash a pit, you'd need a different file.
Edit: also MistahBungle, I did write that guide. Currently just formatting/minor corrections. Will be posting soon.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Ok thanks for your answers. Now everything is working, the phone is rooted and stuff but a few applications don't work at all such as contacts...
How can i fix this?
What do you mean by 'not working?' As in they force close on opening? Or it doesn't display your contacts? If it's not displaying contacts, sign in to your google account and let them sync. If it's force closing, you can try a few things. First go into recovery and fix permissions. If that doesn't work, clear data for the offending apps. Or, If when you rooted, did you use titanium backup to back up your apps? Then did you restore every single app backup? You can't restore things such as contacts, it's a system app.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Hopper8 said:
What do you mean by 'not working?' As in they force close on opening? Or it doesn't display your contacts? If it's not displaying contacts, sign in to your google account and let them sync. If it's force closing, you can try a few things. First go into recovery and fix permissions. If that doesn't work, clear data for the offending apps. Or, If when you rooted, did you use titanium backup to back up your apps? Then did you restore every single app backup? You can't restore things such as contacts, it's a system app.
Sent from my GT-I9100: Powered by Dorimanx, running RootBox
Click to expand...
Click to collapse
Yes they force close. I will try this. Thanks for your help
Not one to be harsh but it sounds like you should of read about using flashing etc and the read again before starting anything.
Sent from my Desire HD using xda app-developers app
So this is what happend. I tried to flash the latest official firmware from sammy, whent in to download mode on the phone, selected the right PDA. But then I got this message:
Added!!
Odin v.3 engine (ID:8)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
cache.rfs
Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1)
Then I tried ALL the USB ports and after a while I got this message instead:
Can't open the serial(COM) port.
And upon that, now the pc does not recognize my s2 when I plug it in. Ps I still have the phone up and running in download mode just in case it would f*** up my if I shut it down!
Please help me with this mess! :crying:
Ok, so trying all the usb ports is one thing to do.... There's plenty of other things you need to try. If you can still get in download mode don't stress, 99% of people get out of the situation you're in.
Click the link in my signature, and follow all the steps exactly.
Sent from a galaxy far, far away
Hopper8 said:
Ok, so trying all the usb ports is one thing to do.... There's plenty of other things you need to try. If you can still get in download mode don't stress, 99% of people get out of the situation you're in.
Click the link in my signature, and follow all the steps exactly.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Okey so I tried all the USB ports but with no further succses. After a while I thought, hmm maby a little bit of rest will fix it. This moning was a nightmare, I thought I hard briked the phone but so was not the case! I can't boot the phone but I get this wierd animation instead:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm currently charging but i'm able to boot in to download mode.
Sent from my GT-N7100 using Tapatalk 2
2xmrc00l said:
Okey so I tried all the USB ports but with no further succses. After a while I thought, hmm maby a little bit of rest will fix it. This moning was a nightmare, I thought I hard briked the phone but so was not the case! I can't boot the phone but I get this wierd animation instead:
I'm currently charging but i'm able to boot in to download mode.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
it is not hard brick...btw now when you connect you phone did odin detect ur phone on this screen??? if yes flash a stock firmware..if not remove battery and pres power+volume down+home then insert battery n check whether your phone goes to download mode or not... if goes download mode flash a stock fimrware.. if not and Odin doesnt detect ur phone then you can go to force download mode by using a USB jig...
It's already in download mode; the phone--warning triangle--pc is forced download mode.
tornado92 said:
it is not hard brick...btw now when you connect you phone did odin detect ur phone on this screen??? if yes flash a stock firmware..if not remove battery and pres power+volume down+home then insert battery n check whether your phone goes to download mode or not... if goes download mode flash a stock fimrware.. if not and Odin doesnt detect ur phone then you can go to force download mode by using a USB jig...
Click to expand...
Click to collapse
Could u please link me the right .tar files?
Sent from my GT-N7100 using Tapatalk 2
2xmrc00l said:
Could u please link me the right .tar files?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
http://samsung-updates.com/device/?id=GT-I9100 please select your region and download then unzip to get .tar files. and flash the file on PDA using ODIN:good: happy flashing..
Thx everyone! The problem is soloved
Sent from my GT-N7100 using Tapatalk 2
:
2xmrc00l said:
Thx everyone! The problem is soloved
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
your welcome buddy