Related
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Hi,
Could you give more information about the errors? At what point do they occur? What errors do you get?
The csc files can be found somewhere on xda, use the search function. The file you need for the phone is called a modem, can also be found on xda.
Although I do not expect that this causes the errors, how did you restore? Did you while your phone and cache first?
Sent from my GT-I9100 using XDA App
What 2.3.6 rom are u trying to flash on?
If the DL was dodgy it would cause problems, redownload and reflash
PIT: if included, also optional
PDA:Code
Phone:modem
CSC:multi csc
Did you do a full wipe?
Sent from my GT-I9100 using XDA App
Make sure you are back on the GB boot loaders and that you have done a full wipe.
Sent from my GT-I9100 using Tapatalk
htt p://1 15.com/file/dnrgfjhq
here have the rom of 2.3.6
there have pit,pda ,phone,csc
i tested it,it works
first of all,this website is come from china
you need delete the spacebar
dotdoms said:
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Click to expand...
Click to collapse
greetings hello I commented that the same thing happened to me the only thing I do is flash with this version XWKK5
follow these steps:
1.Install again (XXLP6) completely.
2.turn off the phone and enter download mode and install the (XWKK5).
3. Once you install the XWKK5 completely. turn off the phone and go into recovery mode and perform the wipes
I hope to help and luck.
I hope you understand me and sorry but my English is a bit bad jejjee
I flashed this update, throuch odin, and now the phone will only boot into download mode or the screen that says to use kies recovery. The problem is, even though I can boot into download mode, the computer no longer recognizes my phone. No sounds when I plug it in or anything. If I plug a jig in, it will come on so it's not the port. Can someone help me?
rogermhoffmanjr said:
I flashed this update, throuch odin, and now the phone will only boot into download mode or the screen that says to use kies recovery. The problem is, even though I can boot into download mode, the computer no longer recognizes my phone. No sounds when I plug it in or anything. If I plug a jig in, it will come on so it's not the port. Can someone help me?
Click to expand...
Click to collapse
Did you have KIES running while flashing?
No I did not
Did you do a full wipe ? wipe cache?
dotdoms said:
but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
Click to expand...
Click to collapse
You need a three part firmware, with modem, csc and pda, flash with pit and repartition, to do a full wipe. I think you used a non wipe firmware, that's the reason for the bugs.
Question
When you flashed the LP6, did you flash it with the .pit file too? I suggest you flash back to your stock ROM but you also have to flash a .pit file as well. This happened to me too when I flashed the KP8 ROM. I reflashed my stock ROM but it kept giving me errors at the initial boot. So I flashed my stock ROM again this time with the same .pit file. If I'm not mistaken it's this: u1_02_20110310_emmc_EXT4.pit
dotdoms said:
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Click to expand...
Click to collapse
Did you get the 2.3.6 firmware? If not look at this thread from Infratech: http://forum.xda-developers.com/showthread.php?t=1075278. Have a good look at the section marked "Individual CSC Packages". Maybe this could help if you suspect a wrong CSC being the cause of your problem.
Hi,
I desperatly need your help yesterday i wanted to flash a new firmware on my samsung galaxy s2 and since i'm stuck on download mode after figuring out how to get it unbriked but i cant do more, it wont go in recovery mode at all and odin doesnt install any firmware at all it gets stuck on SetupConection and wont go any futher, the only thing that does work is when i flash a Kernel on its own, but that just takes me to SAMsung galaxy s2 boot up with yellow triangle and doesnt go any futher, have to keep taking battery out, pressing volume keys usb plugged in and battery back in to go into download mode, please help it's only 3 days old
Download a GB stock rom from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
flash by following the instructions posted via Odin
If it fails flash a kernel as you have followed by download mode and flash stock rom as above .
Limited help due to no details of firmware or phone in OP .
jje
have you made sure KEIS is not running?
and which firmware are you trying to flash, and wich one is already there in your phone?
zaheedahmed said:
have you made sure KEIS is not running?
and which firmware are you trying to flash, and wich one is already there in your phone?
Click to expand...
Click to collapse
NO i do not have Kies on my pc, it originaly had 2.3.6 gingerbread i wanted to try and install 4.0.3 from androidadvices so i could root it and try and unlock it
JJEgan said:
Download a GB stock rom from .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
flash by following the instructions posted via Odin
If it fails flash a kernel as you have followed by download mode and flash stock rom as above .
Limited help due to no details of firmware or phone in OP .
jje
Click to expand...
Click to collapse
thanks for the reply, any download i click on it comes up this file has been removed or not found, i clicked on different ones but there isnt one that works :'( there are sooooo many different downloads i havent got the faintest clue wich one to start with
seems you are doing something wrong my friend
select a GB official ROM, carefully read the guide for using ODIN, and flash...
---------- Post added at 06:04 PM ---------- Previous post was at 06:03 PM ----------
this one is working here : http://skywanker.net/download/downl...9100_DBT_I9100XWLA4_I9100XXKI4_I9100DBTKH1.7z
Have done the flash again with the file you sent me and Odin says FAIL i really have no luck
are you sure phone is SGS2 I9100?
which kernel are you able to flash sucessfully?
& and what is the condition of your phone now?
zaheedahmed said:
are you sure phone is SGS2 I9100?
which kernel are you able to flash sucessfully?
& and what is the condition of your phone now?
Click to expand...
Click to collapse
Its stuck on download mode, when i take the battery out it stays on samsung galaxy s2 boot writing , i flashed the I9100XXKI3 kernel to free me from the bricked page where it has a little yellow triangle with the phone and pc picture in the middle
looks too much mess up and you took wrong step in panic..
You should not have flashed a Kernel to get rid of bricked screen (phone!PC), you have to get download mod and falsh complete ROM that time...
you told your Running ROM was 2.3.6 but KI3 is an old version...
zaheedahmed said:
looks too much mess up and you took wrong step in panic..
You should not have flashed a Kernel to get rid of bricked screen (phone!PC), you have to get download mod and falsh complete ROM that time...
you told your Running ROM was 2.3.6 but KI3 is an old version...
Click to expand...
Click to collapse
so what now ? odin still says Unresponding or fail
supersel said:
so what now ? odin still says Unresponding or fail
Click to expand...
Click to collapse
do you remember yout exact version of Current GB 2.3.6 version,
then try flashing stock kernel of the same version
more options to try
1)connect your USB cable to direct mother board USB socket,
2)try on onother PC
supersel said:
so what now ? odin still says Unresponding or fail
Click to expand...
Click to collapse
Try to use Heimdall. Maybe that works.
You say you dont have Kies. Download kies. Run it and it will install the drivers. Close Kies. Make sure its not running in the background. Install your original firmware that came with the phone using Odin. If your in download mode, your not bricked.
sent from my I9100P using XDA Premium
bored_stupid said:
You say you dont have Kies. Download kies. Run it and it will install the drivers. Close Kies. Make sure its not running in the background. Install your original firmware that came with the phone using Odin. If your in download mode, your not bricked.
Click to expand...
Click to collapse
yes it make sence...
zaheedahmed said:
do you remember yout exact version of Current GB 2.3.6 version,
then try flashing stock kernel of the same version
more options to try
1)connect your USB cable to direct mother board USB socket,
2)try on onother PC
Click to expand...
Click to collapse
I tried it on another pC this time its Fail all the time on odin, the original version is XXLP4 im not exacly sure 2.3.6 i remember that, i wouldnt know where to look for a kernel for that version, how do i plus the usb straight into the motherboard socket?
infinity-netchip said:
Try to use Heimdall. Maybe that works.
Click to expand...
Click to collapse
Yes i have Heimdall installed and drivers installed too
bored_stupid said:
You say you dont have Kies. Download kies. Run it and it will install the drivers. Close Kies. Make sure its not running in the background. Install your original firmware that came with the phone using Odin. If your in download mode, your not bricked.
sent from my I9100P using XDA Premium
Click to expand...
Click to collapse
already installed kies downloaded drivers uninstalled it because it doesnt even pick up my phone, reinstalled in like you said, made sure it wasnt running in background but still no difference with odin saying FAIL all the time
Ok.. Try a another usb lead. The original one that came with the phone. Reinstall kies.
sent from my I9100P using XDA Premium
Just tried the original cable, same thing FAIl for everything and kies still doesnt find it
Hey guys,
I've spent the better half of 8 hours looking on multiple forums/downloading roms/attempting to flash my cousin's GT-I9300.
I attempted KIES update and emergency maintenance and they both start freezing.
I attemped odin with a multitude of roms with the model & serial given by kies (PDA:LLB / PHONE: LLA / CSC: LL3)
I've even downloading android commander to no avail.
I've successfully rooted and flashed my i747 multiple times so i'm somewhat familiar with the odin flash process, but this is a bit unsual.. and frustrating lol.
The phone is in reboot cycle (loops after the samsung logo animation), won't let me access recovery but will let me get into odin recovery.
Odin seems to have failed at every stock rom flash...
ANY help?
Riktar said:
Hey guys,
I've spent the better half of 8 hours looking on multiple forums/downloading roms/attempting to flash my cousin's GT-I9300.
I attempted KIES update and emergency maintenance and they both start freezing.
I attemped odin with a multitude of roms with the model & serial given by kies (PDA:LLB / PHONE: LLA / CSC: LL3)
I've even downloading android commander to no avail.
I've successfully rooted and flashed my i747 multiple times so i'm somewhat familiar with the odin flash process, but this is a bit unsual.. and frustrating lol.
The phone is in reboot cycle (loops after the samsung logo animation), won't let me access recovery but will let me get into odin recovery.
Odin seems to have failed at every stock rom flash...
ANY help?
Click to expand...
Click to collapse
I assume with odin recovery you mean download mode? If so try to flash a stock ROM (maybe first a version that is from your region, you can find them on sammobile.com) via Odin and make sure that KIES is turned off (also from task manager, even better uninstall it). Do you have any error message showing up when you try to flash with Odin?
Try the flash again, and if it loops, try booting recovery and doing a reset......yes,I know you said you can't get into recovery, but just try after the flash
Also remember it can take a few minutes to boot after a flash, so be patient and give it a chance
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
Also what does the Odin log say/what stage is it failing at?
chrismast said:
I assume with odin recovery you mean download mode? If so try to flash a stock ROM (maybe first a version that is from your region, you can find them on sammobile.com) via Odin and make sure that KIES is turned off (also from task manager, even better uninstall it). Do you have any error message showing up when you try to flash with Odin?
Click to expand...
Click to collapse
slaphead20 said:
Try the flash again, and if it loops, try booting recovery and doing a reset......yes,I know you said you can't get into recovery, but just try after the flash
Also remember it can take a few minutes to boot after a flash, so be patient and give it a chance
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
Also what does the Odin log say/what stage is it failing at?
Click to expand...
Click to collapse
I've attempted to flash maybe 7-8 different roms. My cousin won the gt i9300 at a raffle overseas so thats why im unsure of what exact country it is. Is there a definitive way of finding which country exactly? I do know it was an unbranded rom and fully unlocked because he's been using it here (w/ straighttalk) for the past 6 months or so just fine i even flashed jellybean 4.1.1 when it was first released (via kies).
When I try to and get the version from kies it tells me (PDA:LLB / PHONE: LLA / CSC: LL3) but no country.. so idk if there's a definite way of finding this out. I'm downloading ICS rom and gonna try and roll back the rom as i've read some people did that and it worked.
Once i bring up download mode it says on the top (ODIN MODE) and binary download count YES (1 count) and rom as custom. I attempt to flash Odin it always fails right after system.img. never gets past i've tried to do multiple attempts(5-6) per rom but no luck yet. never gets past "downloading... do not turn off) phase.
thanks alot for the assistance guys!
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
JJEgan said:
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
Click to expand...
Click to collapse
Model Number under battery says GT-I9300 same thing that's prompted during kies for emergency recovery.. which downloads but ends up not recognizing it. Odin flash on the other hand recongizes it when i plug it but keeps failing.
LL3 is from Pakistan http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=PAK#firmware
Try downloading any unbranded firmware cause it's pretty much it's the same thing. You can always change the csc after you flash your phone.
or Download the right firmware on the country on which you are right now.
Then follow the youtube guide here on how to properly flash it: http://forum.xda-developers.com/showthread.php?t=1646610. You can just skip the unrooting part i guess.
EDIT:
Annandale is in UK right? On the 2nd link that i gave you the first firmware there is from UK so i think you can flash that one.
JJEgan said:
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
Click to expand...
Click to collapse
SignetSphere said:
LL3 is from Pakistan http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=PAK#firmware
Try downloading any unbranded firmware cause it's pretty much it's the same thing. You can always change the csc after you flash your phone.
or Download the right firmware on the country on which you are right now.
Then follow the youtube guide here on how to properly flash it: http://forum.xda-developers.com/showthread.php?t=1646610. You can just skip the unrooting part i guess.
Click to expand...
Click to collapse
Yea i though it was from pain (LL3 rom listed on another thread) but i then foudn the PAK version so that's the one i downloaded but the 4.1.2 version. I downloaded 4.1.1 and 4.0 (ics) version so i'll give those a try too.
Phone specs as they appear on the back are :
Model: GT-I9300
FCC ID: A3LGTI9300A
SSN: -I9300GSMH
S/N: RF1C63KJ4RL
Okay goodluck on flashing your S3 I'm gonna sleep now lol. 12:11am here.
Gnite, gonna keep messing with this and see what happens.
Edit: Annandale. Virginia USA sry for the confusion.
Just tried the ICS and the 4.1.1 rom still fails at systems.img ... any ideas what else it could be?
Riktar said:
Just tried the ICS and the 4.1.1 rom still fails at systems.img ... any ideas what else it could be?
Click to expand...
Click to collapse
see this: http://checkrom.com/threads/nand-write-start-stuck-in-odin.920/ I hope that can help you.
thanks for the info! that first problem stated on there looks the exact problem i'm having, I'll try it asap and check back in with an updated.
Riktar said:
thanks for the info! that first problem stated on there looks the exact problem i'm having, I'll try it asap and check back in with an updated.
Click to expand...
Click to collapse
the pit files that was posted there was for the 64gb one if you are using the 16gb one so I've uploaded the pit files for all SIII storage models.
just take note of this:
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
And make sure to follow the the instructions there. Likewise credits goes to the posters there and not me lol.
SignetSphere said:
see this: http://checkrom.com/threads/nand-write-start-stuck-in-odin.920/ I hope that can help you.
Click to expand...
Click to collapse
SignetSphere said:
the pit files that was posted there was for the 64gb one if you are using the 16gb one so I've uploaded the pit files for all SIII storage models.
just take note of this:
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
And make sure to follow the the instructions there. Likewise credits goes to the posters there and not me lol.
Click to expand...
Click to collapse
Thanks for the follow up and thorough info! i'll make a note of that when i do this later.
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Riktar said:
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Click to expand...
Click to collapse
Get perkas file stash from Play store, I'm sure it has stock kernel
Edit....just checked, plenty of stock kernels to choose from
Andi has some handful of kernels here http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/18 I just don't know if he has the kernel you are looking for.
thanks for links guys! i'll look up one i need and download it and check back in later.
Riktar said:
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Click to expand...
Click to collapse
I had a similar problem, my phone just froze in the middle of a phone call, had to pull out battery, and when i tried to turn it on, it wouldn't pass the second "SAMSUNG" logo, just stayed there forever, with the blue light (Official JB 4.1.2 - not rooted)... Anyway, after 3 days of trying, downloaded bunch of firmwares, but all of them gave me the infamous "Complete(Write) operation failed". This is how I MANAGED to revive my i9300 16Gb Int:
1.Open ODIN, load ONLY the pit file corresponding to your phone (In my case i9300 16Gb Int'l - GT-I9300_mx_20120220.pit), check "Repartition" and "F.Reset Time" and hit "Start".
- If this step goes OK (All threads completed. (succeed 1 / failed 0))
2. Click on the "Reset" button in Odin (or close and re-open it), in PDA select "recovery-cwm-touch-6.0.1.2-i9300.tar", make sure only "F.Reset Time" and "Auto Reboot" are checked, and flash it. If everything goes OK, you should now have CWM instead of Stock recovery.
3. Take any microSD card, any size, and put THIS file on the root of the microSD using a card reader or whatever you prefer - but be careful, copy the zip as it is - do not unzip it.
4. Insert the memory card in the phone, enter recovery*, and select "Install zip from External Storage" and choose the file you put on the root of the card (by the way, it's a 4.0.4 downgrade bootloader), it should flash in a second, the phone will restart, and that's it!
5. Download and flash 4.0.4 Stock FW using Odin (i used "I9300XXBLH1_OXEBLF1.zip"), everything should go OK, and the phone will be bootable again.
*(my phone didn't wanted to enter recovery the old fashioned way using 3-button combo, but i managed to enter recovery from charging mode, by connecting the charger on a switched off phone, and as soon it starts charging press Vol Up + Home + Power, and when the FIRST Logo (Galaxy S III GT-I9300) appears, let go of the power button, keep pressing the Vol Up + Home, and it enters recovery).
Hi
Today was released v4.1.2 for my girlfriend SII.
She's still on 2.3.3, the phone is rooted but she can't update through kies because of binary count.
What's the easiest way to solve this?
1-Using triangle away and update using kies (assuming that after using triangle away she can update)?
2-Using odin to manual update? Does she still needs to use triangle away?
3-Her carrier is TMN Portugal. But since it' probably full of bloatware can she use TPH (no carrier) from Portugal firmware?
4-Can she use triangle away on gingerbread (2.3.3)?
Thanks
Download the 4.1.2 firmware you want from Sammobile.com.
From what i know, if you flash a stock firmware your binary count will revert to 0 (not sure though)
About the carrier thing, i don't know. But you can root it aswell on 4.1.2 and then you can use titanium (or other software) to freeze or uninstall bloatwares..
Get the ROM you like (it doesn't matter if it's from portugal or not, branded or unbranded) from sammobile like the above poster said and Mobile Odin (play store), that's the easiest way to do it.
Sent from the little guy
Thanks for the replies :good:
Instead of mobile odin which is a paid application on the market can i simple use the windows version of odin?
I know there's a lite version here on xda, but we have to manually install another file, and seems easier just using odin pc version.
Sorry for the newbie questions but it's not my phone.
slowdyve said:
Thanks for the replies :good:
Instead of mobile odin which is a paid application on the market can i simple use the windows version of odin?
I know there's a lite version here on xda, but we have to manually install another file, and seems easier just using odin pc version.
Sorry for the newbie questions but it's not my phone.
Click to expand...
Click to collapse
Yes.
Put the phone in download mode. Connect to pc install drivers etc, then make sure you kill kies in task manager on windows. Or whatever OS your using. Then open odin. And flash the desired rom.tar to your phone. Simple as that
There are many guides for using odin. If you need any help just ask.
Edit-
as far as im aware, triangle away works on every version of android i have tried. As long as its rooted.
Sent from my GT-I9100 using Tapatalk 2
Try triangle away and them update via kies if is not working put phone in download mode and flash latest firmware from sammobile via odin
Send from my SGS2 I9100 with HassanROM and latest DorimanX 8.xx kernel
The M.O app is free, M.O Pro is paid.
M.O will flash and wipe.
M.O Pro will flash, wipe & Root.
Sent from the little guy
Hi, I have been trying to root my Galaxy S2 and I can't get Heimdall to detect the phone. I put it in download mode and connect it to the computer, then run the detect function and it cant find the device. I have searched for hours for answers on why this is happening but I can't seem to find the reason.
One answer i found was to use kextunload to make sure no other USB drivers were loaded and interfering with the phone when it was being plugged in but it didn't work for me.
Phone: Samsung Galaxy SII GTI9100
Network: Meteor Ireland
Kernel: KF3
Android : 2.3.3 Gingerbread
CSC: KE1
All I want to do is update my OS, however it can't be updated via Kies because my CSC and Location are different(I think), I just get the message "Your devices current firmware version is not supported to update firmware via Kies".
Any help would be great, thanks in advance!
Are you using a mac?
If not, why aren't you using Odin?
Anyways, if you're rooted, flash with Mobile Odin.
Sent from the little guy
gastonw said:
Are you using a mac?
If not, why aren't you using Odin?
Anyways, if you're rooted, flash with Mobile Odin.
Sent from the little guy
Click to expand...
Click to collapse
Yes, OSX 10.6.8 is the version of OSX I'm running on my Macbook. I am not rooted either, this is a problem I have had while trying to root my phone.
Gingerbread right? Not that easy to root without a PC.
Flash JB in a pc/laptop.
Sent from the little guy