[Q] USB Device not recognized - Galaxy S II Q&A, Help & Troubleshooting

Hi,
When i plugged in my Samsung Galaxy SII, to either my desktop or laptop, it is saying 'USB Device not recognized'. When i click on the message it displays a message 'windows has stopped this device because it has reported problems. (code 43)'.
It is not getting connected to Kies on my system too. I tried reinstalling the device driver and even re-installed the Kies, even then it didn't work.
Please help me resolve this issue.
Regards
Kishore. K

USB device not recognized
The USB connector pin was the problem(though mobile is gettng charged, data is not accessible when connected to system).
After getting that changed,its working fine.

Related

[Q] Please help: Kies not connecting...

Hi, I have a problem connecting to Kies. I have been searching for hours over the internet for a solution but nothing worked.
Until yesterday I was connecting normally to Kies, syncing my mobile and checking for updates. Yesterday Kies gave me a message that there is a new update (for kies software), so I accepted the update and got the latest version (2.0.3.11082_152). Since I did that i couldnt connect my SGS2 to Kies again. It keeps on saying "connecting" on the screen but never ends and never show my SGS2 under "connected devices" .
I already have "debugging mode" unchecked. I used the option to update drivers several times. I tried to download Kies again at least 8 times (both the latest version as well as the original version I previously had), I tried unmounting my SD card, I tried several USB cables, but still getting "connecting" that stays forever.
BTW, I can connect to my PC in USB storage mode.
I have stock Android 2.3.3 with Kernel version JPKH1 (Arabic enabled).
I really appreciate any help from anyone.
I have read in many forums that I need to pick "Kies mode" by going to Settings>Wireless and network> USB settings. Well, on my phone when I go to Settings>Wireless and netwrok I dont have "USB settings" in the list but have "USB utilities" instead. Under "USB utilities" the only option I have is USB mass storage. IS THIS WHAT OTHERS HAVE ON THEIR SGS2s ???
same prob
Anyone, PLEASE....
waelnd said:
Anyone, PLEASE....
Click to expand...
Click to collapse
I have read in many forums
suggest if these forums know so much ask them as you are not getting an instant reply .
Under "USB utilities" the only option I have is USB mass storage. IS THIS WHAT OTHERS HAVE ON THEIR SGS2s ???
Off course thats what we all have your other forums are talking nonsense .
Suggestion turn phone OFF turn PC off reboot PC Reboot phone .
Start Kies connect Samsung USB cable .
Wait for Kies to connect .
jje
And make sure you run Kies as Administrator if you are running Win7
I used to have the same issue.
If you are using a 3rd party launcher, try turning that off and returning to touch wiz, as that caused issues for me, also make sure the phone is unlocked.
Failing that, turn the computer off, and plug the phone in, and then boot the computer back up, that might force it to install the drivers.
Same problem with me.i have win xp.but newer kies verson does not support sgs2.one another problem is i accidently uninstalled samsung usb driver for mobile phone.now i connect phone with pc via usb cable,the pc every time says fond new hardware and try to install it but could not sucseed.when i manually install driver,pc every time says "mobile phone has being used,eject the phone and reboot pc then install usb driver".where no phone is conected.why pc says eject phone where no phone is conected? Please help me please.
Sent from my GT-I9100 using XDA App
Saolved: Kies not connecting
Hi. To any who is faing this problem, here is the soultion that worked with me.
After trying everything, from rebooting PC and phone several times, using Kies "Resoultion Connection Eror" to download drivers many times, making sure the USB debugging is turned off from setting, etc,,,,, NOTHING WORKED
So:
1- I disconnected my phone from PC
2- I went to PC Control Panel>System and Maintenance>System>Device Manager
Under "USB Controllers" I didnt find anything with Samsung name. Instead, I found 2 entries under the name "USB Composite Device". Using right click I uninstalled them.
3- I reconnected my phone with Kies closed. As soon as I reconnected my phone, I had a message saying that Samsung Drivers are being added
4- I opened KIES, and Voila... my phone connected and I could see its name under Kies connected devices.
5- Now under Device Manager I can see "Samsung Mobile USB Composite Device"
My interpretation is that although I tried to update the Samsung drivers thru Kies many times, the drivers that already existed for the "USB Composite Device" (which I uninstalled in step 2) were forbidding Samsung drivers to take their place. So when I unistalled the USB Composite Devices everything worked the way ot should.
Hope this could help anyone who faces this problem.
Solved!!
Just go through the trouble shooting procedure which shows up on the screen when Kies is running and your device is not able to connect. It'll download some driver and automatically fix the issue.

[Q] Samsung Grand-Doesnt get recognised on PC (Updated Drivers installed)

Hi,
I use Windows XP Prof SP2 on my HP 520 laptop and am trying to connect my Samsung Grand phone as Mass Storage.... unsuccessful!!! :crying:
When I connect my Grand to my laptop using USB cable, my phone says "Connected as media device", and sometimes the right bottom corner notification on my laptop recognises my device and flashes I9082 and then says "a problem occured during installation of your hardware", and sometimes my laptop doesnt recognise (it does nothing).
When I check Device manager, it has a yellow exclamation next to the Samsung Mobile MTP device driver (screenshot attached)...
I have uninstalled and reinstalled Samsung USB Drivers for Grand on my laptop & restarted after driver installation. I also uninstalled and reinstalled Kies latest version, several times. Have tried going to Device Manager and updating the driver. Just says that there was no better match found than the software already installed (Screenshot attached)
Samsung Kies recognises my device as GT-I9082 but just says "Connecting" and stays that way for hours (Screenshot attached)... I m looking at connecting my android device as mass storage (I somehow dont find Samsung Kies comfortable enough).
Please let me know the way forward.

S6 edge, USB device not recognized!!!

Hi! I have a galaxy s6 edge and it is not connecting to pc as media device, mass storage or camera etc. It only charges when connected to pc via cable but on device's screen it asks to choose from media device(mtp) or camea(ptp) whether I choose meida device or camera device nothing works and computer shows ''USB device not recognized''.
On device manager my phone is labeled as unknown device with error code ''43''.
and yes I have installed all Samsung USB drivers, Samsung smart switch and Samsung Kies but still not recognizing my phone.
I've also tried different usb ports, usb cables and even different windows and pc but no luck. :crying:
Plz help me. Your help will be greatly appreciated, Thanks.
(Sorry for my bad English/Grammar)
AKZADRAN said:
Hi! I have a galaxy s6 edge and it is not connecting to pc as media device, mass storage or camera etc. It only charges when connected to pc via cable but on device's screen it asks to choose from media device(mtp) or camea(ptp) whether I choose meida device or camera device nothing works and computer shows ''USB device not recognized''.
On device manager my phone is labeled as unknown device with error code ''43''.
and yes I have installed all Samsung USB drivers, Samsung smart switch and Samsung Kies but still not recognizing my phone.
I've also tried different usb ports, usb cables and even different windows and pc but no luck. :crying:
Plz help me. Your help will be greatly appreciated, Thanks.
(Sorry for my bad English/Grammar)
Click to expand...
Click to collapse
Try Factory Reseting For phone
Already did this but it did not helped
osman34 said:
Try Factory Reseting For phone
Click to expand...
Click to collapse
Already did this but it did not helped me.. anyways thanks for your reply
did you fix the issue
fixed?
my phone is doing the same thing all the sudden. did you find a fix for this problem?
Possible fix
Try uninstalling the driver in Device Manager. click Scan for hardware changes in menu at the top of the Window. Then Device Manager will scan your system and automatically reinstall the device. After you follow steps above, the Code 43 error should resolve.

Samsung note 10.1 GT-N8010 issues

After updating the firmware. I am unable to connect to wifi. The wifi will not even turn off. I cannot connect to my PC either. I have tried with other PCs as well and with different cables. All show same message "USB device not recognized. One of the devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message." I have updated drivers, disabled drivers, tried different ports, restarted device, restarted PC and still no luck. My device, GT-N8010 is running android 4.4.2 and not rooted. So now i cannot flash another rom or root my device to try and fix the problems. Any suggestions?

J1(2015) doesnt connect to PC( HELP QUICK)

I have a J1 (2015), 4.4 kitkat, It has been connected to my laptop, win 10, several times with no problem. Yet now it doesn't connect now. I tried connecting it to a different pc, win 7, yet the problem occurs. I tried download mode, doesn't work. the phone works fine but doesn't connect.( connects through bluetooth)
Also when i connect it says It Says "unknown usb device device descriptor failed"-"error code 43". stays for awhile and disappears
after it disapppears "asus virtual enumerator 01" appears under other devices
I tried: Updating drivers
Reseting my phone
changing usb ports
changing usb cables
changing pc
IF any questions about this or you found an answer please reply to this or [email protected]

Categories

Resources