Sorry don't know if this has been solved already. I am a noob. When I used to connect to my pc via usb cable a menu used to drop down on my phone asking me whether I wanted to mount, charge, etc. Now nothing drops down and my phone just charges. I am extremely frustrated because I want to transfer videos back and fourth. I went into my phone settings where it says connect to pc and tried stuff there also but nothing. Please help someone. I have not rooted or did anything to my phone.
Go to settings, connect to pc. Look if ask me was unchecked. You can also change your default connection type there.
Sent from my lair.
Yes I did all that already. Didn't work
Try another USB port on your PC. Also you might want to try another cable if you have one. I had a bad cable one time and had a similar problem.
Hey thanks alot it was the cable. I don't know how my cable just went bad. Its the original htc cable that comes with the phone. It still charges though also. Do u know why this happened?
Related
So, I just got a HTC HD2 and am trying to connect it to the PC. By the way, did the TMOUSA HD2 ever come with a cd?
I have a vista and tried to download the Activesync 4.5 but it won't allow as I am suppose to download Windows Mobile Device Center. So, I download WMDC and installed it. I plug in the phone and all I get is "USB Device Not Recognized" . PC doesn't detect it.
I have searched everywhere and tried everything but can't seem to get it going. I haven't anything solid to get it to work.
I tried:
-reinstalling the WMDC
-check and uncheck "Enable faster data sync"
Anybody have any idea? TIA
Is the phone charging LED lighting up when connected?
Have you tried another USB cable and/or another computer?
Then you could boot the phone up in Bootloader Mode. It will say 'serial' at the bottom of the screen. Then plug in the USB cable. The 'serial' should change to 'USB'. Then this might indicate that your computer is viewing the device as a unknown device. This device can be removed and your phone, in normal mode, replugged in.
This may not help, but it's worth a try. Vista has a known issue where it just stops recognising USB devices, even basic ones. Plug your phone in via USB and then restart the computer. When it comes back on it may recognise the phone. If this works then it will be okay for a while at least, but you may have to do this again every now and then.
Vista's basically a bug-ridden bag of gash. If you can, upgrade to Windows 7.
Hope this helps mate.
fred_up said:
Is the phone charging LED lighting up when connected?
Have you tried another USB cable and/or another computer?
Then you could boot the phone up in Bootloader Mode. It will say 'serial' at the bottom of the screen. Then plug in the USB cable. The 'serial' should change to 'USB'. Then this might indicate that your computer is viewing the device as a unknown device. This device can be removed and your phone, in normal mode, replugged in.
Click to expand...
Click to collapse
I tried with a laptop with vista (WMDC) and a laptop with xp (activesync 4.5). The led charging light is on, so it is charging but for some reason device not recognized.
I tried the bootloader (not sure what that does) and it says serial and then I plugged in the usb and it still says serial.
Still not working
johncmolyneux said:
This may not help, but it's worth a try. Vista has a known issue where it just stops recognising USB devices, even basic ones. Plug your phone in via USB and then restart the computer. When it comes back on it may recognise the phone. If this works then it will be okay for a while at least, but you may have to do this again every now and then.
Vista's basically a bug-ridden bag of gash. If you can, upgrade to Windows 7.
Hope this helps mate.
Click to expand...
Click to collapse
I think I tried that already but I'll give it a shot again. At this point, I'll do anything lol. I was so stoked in putting android in this too
does any one think a hard reset might help?
It sounds as though the USB controller in the phone is damaged. I had this problem with my HTC Diamond, and searched for ages trying to find a solution. I manged to flash it with a couple of times with different ROMs (from the internal memory via WiFi) - this did not solve the problem.
I am sure that a power surge from a car charger was the cause of the fault.
bananapants said:
does any one think a hard reset might help?
Click to expand...
Click to collapse
it couldn't hurt. i would - see what happens.
try checking cabling first or change the cable
Same problem
I am having the exact same problem. My phone can charge on the computer but I cant sync of even access it via the "Disk Drive" setting. I have tried both AcrtiveSync and the Disk Drive option, unchecking fast data synchronization, reseting the phone, and reinstalling WMDC. I have Windows 7 with the latest updates. I have also tried connecting it to two other Win7 machine with identical "device not recognized" results. The phone and cable and practically brand new. Any help would be greatly appreciated. I'm at my wits end with this phone and it has been beyond frustrating.
Dom
Try another pc... buddy wid wmdc in it... go for win 7
Sent from my HTC HD2 using XDA App
I am having same problems have tried on a vista pc, my mac and mac running parallels, nothing works. Reckon it is as fred_up says, damaged usb controller which means no NAND Android for me.
Been having similar problems, but seems to have been less likely to occur if I click "Safely remove hardware" in Vista or W7, and remove the device - yes even Activesync (doesn't seem to be available in XP)
Mark
did anybody find a soulution?
hi
did anybody get solution for this? i m having the same problem.
phone doesnt sync with wmdc, nor connect as disk, only charges itself.
message appears "usb device not recognised"
i have done everything, changed cables, pcs, re installed wmdc, even flashed new roms using micro sd....nothing happened.
is this a hardware issue? why can it be charged but not synchronised?
pls help anybody.
Try another Cable. In my case, changing the cable works. Now i m using my HD mini cable with HD2 and it is working well.
krishan2207 said:
Try another Cable. In my case, changing the cable works. Now i m using my HD mini cable with HD2 and it is working well.
Click to expand...
Click to collapse
thanks,
but i have already tried all that.
today i called a phone repair shop and they told me that
this could be due to two reasons.
1. usb port problem.-in which case it is replaceable for about 15 usd.
2. problem with an IC (?) of the circuit (guess the motherboard) - in which case
it is either not repairable or very expensive.
i ll keep posting as i go and visit the shop.
if there's another solution pls share here.
Some possible solutions to non-USB
Having come here via a search, I'll resurrect the thread with a brief comment. I'm having the same problem, haven't tried them yet but found several promising suggestions:
http://www.tipandtrick.net/windows-...drop-and-not-sync-with-vista-wmdc-activesync/
HTH
solution...
oops...had forgotten all about this thread, until today till i received the notice about new reply.
thanks for resurrecting the thread.
actually i went to that phone repair shop i mentioned earlier and they fixed it by replacing the usb port. still it didnt work with win 7 laptops. but was fine with xp laptops. dont know why...anyway i have said good bye to my hd2 long ago & using android now
guess lots of people are.
good luck to you all.
So I dropped my phone in the pool while I was on vacation and i used the old rice trick. Now everything works, except I cannot connect my phone to my computer via USB. (I'm running cyanogenmod 7, btw.) when i plug it in, it starts charging, but the "usb connected" and "usb debug" dialogs in the notifications menu does not appear. When i try to tether via usb, it says "USB not connected" This is beyond me.... hahaha. Any suggestions?
might need to order a new charger port. see if you can get it into downloadmode via the good ol battery out battery in vol up/down inset usb trick. bet it wont go into dl mode
Yeah, i tried. No luck. So where can i order a new charger port? and how do I install it?
my charger port is busted too. but i ordered a new port off ebay for about 5 bucks. closest i found was in hongkong and it took like 3 weeks to get here but its here.
take the phone apart and solder the new port in and you should be good.
For someone who's never soldered something in his life? Well, i should probably learn. I'm not paying $50 bucks to have someone else fix it. You know, I might be able to re solder the current charging port.... worth a shot.
i would just order a new port. if you need to get into download mode in the meantime u can use terminal emulator.
su [enter]
reboot download[enter]
that will throw u into downloadmode
thanks. But what's the point if i can't connect? I'm trying to restore to stock JFD using odin (i want to flash a new rom and i want a clean install)... Is there a way to do that over SSH?
have you tried a diff usb cord? usb port? are you using a laptop or desktop?
if ur on a desktop id suggest trying the usb port in the back of your comp
I'm on a laptop, but i've tried it on a desktop, too. I have two USB cords, the one that shipped with my phone and another, longer one. No luck with either cord....
ok this might be off the wall but try this. slowly put the usb in but not all the way. ive noticed vibrants to think its in usb mode sometimes when slowly inserting the usb into the phone.
its an idea and it may work. hope you have steady hands
No dice. Charging indicator came on halfway through, but nothing else. At least that shows that it's definitely a hardware problem.
take the phone apart and look and see if its physical damage. maybe it can be fixed now and not need another usb port but most likely will need a new one
wish i coulda helped
My SGS2 keeps disconnecting and reconnecting the usb with my computer. This is hapenning for quite a long time now.
I keep hearing the windows connect/disconnect usb sound when my phone is plugged in, making it unable to recognize the device.
Today, it finally didn't had this problem for a while, so I took my chance to get back to stock ROM (because I need to send my phone to Samsung for camera problems). So I flashed stock ROM with ODIN, but I encoutered a problem: it didn't get further than the boot animation.
When I tried to reflash, ODIN didn't recognize my phone anymore, just like before. When I plug in my SGS2 to my computer while on download mode, it just keeps reconecting the USB, so the device can't be installed.
Tried a different computer. It kept being connected, but that comp sucks and it couldn't recognize my phone at all. My own computer also has problems recognizing the SGS2, but also has the problem that it can't stay connected.
Things to know:
- Other usb devices do stay connected, it's just for my sgs2
- I've tried different USB hubs etc., reinstalling Kies, uninstalling drivers.
- It does keep charging the phone, even when the computer makes the disconnect sound. That makes it even weirder!
Basically I'm seriously out of clues how to revive my phone
I don't want to send it to Samsung, scared of losing warranty.
You guys are my last hope!
to start the ball rolling, YOU SHOULDNT BE connecting sgs2 to a HUB, thats probably the fault, second, have you tried a different usb lead or a different computer with the same lead to either verify if its the phone or lead at fault??
No one on here can answer your question because it sounds like a hardware issue, wire or hub or charger port, but it is an elimination process and only you can do that.
If you try everything and still get no joy, restore your pc to an earlier point, uninstall the samsung drivers and re-install them etc etc.
I very much doubt its a software problem tho, looking at what you tried already, lots of people use hubs, if youre flashing roms and your connected to a hub then ya play a dangerous game and risk soft bricking your phone, most of the time odin wont recognise your phone through a hub, same if ya usb lead is too long, itll charge but no data. always connect it directly to the pc usb 2 port.
gazza35 said:
to start the ball rolling, YOU SHOULDNT BE connecting sgs2 to a HUB, thats probably the fault, second, have you tried a different usb lead or a different computer with the same lead to either verify if its the phone or lead at fault??
No one on here can answer your question because it sounds like a hardware issue, wire or hub or charger port, but it is an elimination process and only you can do that.
If you try everything and still get no joy, restore your pc to an earlier point, uninstall the samsung drivers and re-install them etc etc.
I very much doubt its a software problem tho, looking at what you tried already, lots of people use hubs, if youre flashing roms and your connected to a hub then ya play a dangerous game and risk soft bricking your phone, most of the time odin wont recognise your phone through a hub, same if ya usb lead is too long, itll charge but no data. always connect it directly to the pc usb 2 port.
Click to expand...
Click to collapse
Ow, I think I used the wrong word. I meant to say port instead of hub.. Translation fail there. So that's not the problem, I've put the cable directly into the USB port.
I think you are right about the hardware problem. I'm just not sure where the problem is. I only have one cable, so I can't test that atm. But like I said, the connection problem does NOT occur on another computer. It keeps the device connected (as an unknown device though).
So it's weird: it looks like a SGS2 hardware problem, but on the same time it has a different problem on a different computer. It's really confusing...
Thanks for the quick reply by the way
sebas156 said:
Ow, I think I used the wrong word. I meant to say port instead of hub.. Translation fail there. So that's not the problem, I've put the cable directly into the USB port.
I think you are right about the hardware problem. I'm just not sure where the problem is. I only have one cable, so I can't test that atm. But like I said, the connection problem does NOT occur on another computer. It keeps the device connected (as an unknown device though).
So it's weird: it looks like a SGS2 hardware problem, but on the same time it has a different problem on a different computer. It's really confusing...
Thanks for the quick reply by the way
Click to expand...
Click to collapse
Android Sync manager Wifi is the answer you're looking for ^^
no more plugging in this... mounting that...
NB, has a pc side component
King_Rat said:
Android Sync manager Wifi is the answer you're looking for ^^
no more plugging in this... mounting that...
NB, has a pc side component
Click to expand...
Click to collapse
Then please explain me how I could ever do that when there is no working ROM on my phone. I'm stuck on the 'restore with Kies' screen, like I told in my post (yes, still). And how it will ever work with ODIN? It won't...
Now not any computer is connecting with my sgs2. It just doesn't show anything (not even unknown device). I'm going to try to buy a new cable. Is it needed to buy a Samsung cable? Because it's harder to find than just a regular usb to micro usb cable (and more expensive ). This is my last hope. When it's not working, I need to send it to Samsung.
sebas156 said:
Then please explain me how I could ever do that when there is no working ROM on my phone. I'm stuck on the 'restore with Kies' screen, like I told in my post (yes, still). And how it will ever work with ODIN? It won't...
Now not any computer is connecting with my sgs2. It just doesn't show anything (not even unknown device). I'm going to try to buy a new cable. Is it needed to buy a Samsung cable? Because it's harder to find than just a regular usb to micro usb cable. This is my last hope. When it's not working, I need to send it to Samsung.
Click to expand...
Click to collapse
You need to replace your usb board within your phone. New part can be found on ebay for around $10. It's a really simple task replacing it. No soldering or anything.
It's been well documented on these boards.
Sent from my GT-I9100 using Tapatalk 2
My i777 will not connect to my pc through usb, the pc doesnt even charge it!! The usb cord will charge when its plugged into a wall charger though. I know its not my cord because ive used different usb cords and they dont work. And its not my computer because I can connect other devices to it via usb. My phone is rooted and on stock Samsung jellybean firmware. Can some one please help me !
Did you even try to search? Plug your first sentence into the search all forums bar and see what comes up. There are so many threads on here about that problem. Give the search bar a try before creating a thread. That is on of the rules here.
Butchr said:
Did you even try to search? Plug your first sentence into the search all forums bar and see what comes up. There are so many threads on here about that problem. Give the search bar a try before creating a thread. That is on of the rules here.
Click to expand...
Click to collapse
Yes I did, I searched for a couple hours looking through threads even went to different websites. None of the solutions worked so I created a thread hoping someone could give me an answer as to what is going on with my phone
By your PC not charging your phone it is very hard to tell. Lets start with the basics. You have tried different usb ports on the computer. You have turned on USB debugging on your phone. You have tried different USB cables. You have uninstalled and re-installed kies on you computer. You have done what you could to clean the usb port on your phone. You have tried to connect your phone to the pc in download mode. That about exhausts my limited knowledge. Sounds like you have been pretty busy over the past couple of hours to get all that done. I am not sure what to tell you besides it sounds to me like your phones usb port is toast. Maybe you can do some searching and see if you can find some one that can repair that bad boy for you.
Butchr said:
By your PC not charging your phone it is very hard to tell. Lets start with the basics. You have tried different usb ports on the computer. You have turned on USB debugging on your phone. You have tried different USB cables. You have uninstalled and re-installed kies on you computer. You have done what you could to clean the usb port on your phone. You have tried to connect your phone to the pc in download mode. That about exhausts my limited knowledge. Sounds like you have been pretty busy over the past couple of hours to get all that done. I am not sure what to tell you besides it sounds to me like your phones usb port is toast. Maybe you can do some searching and see if you can find some one that can repair that bad boy for you.
Click to expand...
Click to collapse
I ve done all of those except re-install kies and clean my usb port. My phone WILL still charge if im using a wall charger though. Ill try cleaning my usb port though and re-intalling kies
Butchr said:
By your PC not charging your phone it is very hard to tell. Lets start with the basics. You have tried different usb ports on the computer. You have turned on USB debugging on your phone. You have tried different USB cables. You have uninstalled and re-installed kies on you computer. You have done what you could to clean the usb port on your phone. You have tried to connect your phone to the pc in download mode. That about exhausts my limited knowledge. Sounds like you have been pretty busy over the past couple of hours to get all that done. I am not sure what to tell you besides it sounds to me like your phones usb port is toast. Maybe you can do some searching and see if you can find some one that can repair that bad boy for you.
Click to expand...
Click to collapse
Alright so I know what caused this problem, I used framaroot to root my phone then unistalled the app. When I uninstalled the app thats when I started having this problem. So im going to see if the dev of framaroot can help me out
Hey There.
So i got a small problem. When i connect my phone to my computer with a misro usb (not 3.0) it doesnt recognize the phone at all. Normally on the phone it will show its in Camera or MTP mode oin the pull down menu but now its not showing anything but it does charge the phone. Did i hit a setting somewhere i didnt realize?
Any help is much appreciated.Been on the site quite a few times just reading the wealth of knowledge. First time ive had an issue where the answer isnt already posted here lol.
Thanks
But you're saying it does work with the original Samsung 3.0 USB cable? Then that would mean the phone doesn't like the other cord for some reason. Samsungs can be picky like that sometimes. Check the Device Manager for driver errors and try other ports, cords, and computers to make sure it's not a new issue with the phone's USB charge port.