Alright so i was flashing the Noob-Proof Odin version of CM10 and when i used Odin to flash the file the operation failed.
The following is what the Odin message is:
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> system.img
<ID:0/025> NAND Write Start!!
<ID:0/025>
<ID:0/025> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/025> Removed!!
<ID:0/025> Added!!
<ID:0/025> Removed!!
<ID:0/025> Added!!
<ID:0/025> Removed!!
Currently my phone is in download mode, it says Downloading Do not turn off target and the blue bar below it is stuck at around 60%.
Odin also recognizes my phone and well keeps saying Added!!, Removed!! all the time.
My phone was at 40%battery when i started this so im pretty sure battery didnt die midway but i dont know how long the battery will last. What do i do now? have i successfully bricked my phone beyond repair?
I was running criskelo team rom V13 before and made a EFS and Nandroid back up right before starting
My phone was at 40%battery when i started this so im pretty sure battery didnt die midway but i dont know how long the battery will last. What do i do now? have i successfully bricked my phone beyond repair?
Remove battery .
Flash stock rom via Odin with a charged battery .
jje
Stock rom? I cant flash CM10 again? and are you sure removing battery wont damage my phone? it clearly says Dont turn off target.
I just dont want to screw anything up
I would say leave it on wall charger for 30 minutes then flash stock with odin.
I had similar problem but with another phone, 40% battery is not enough.
edit: flashing stock is only to try and save the device, you can try and break it again afterwards
edit2: also by odin flashing 4.0.4 stock then rooting you can flash CM10 on recovery mode and be clear of wifi bug this way.
So i did what you said and again Odin is getting stuck again. This is what it says now. I flashed the XXALE8 firmware. I dont know what im doing wrong. Im currently downloading the XXALE8 firmware again and gonna try again
<ID:0/025> Added!!
<ID:0/025> Removed!!
<ID:0/025> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_INU_I9300XXALE8_I9300ODDALE5_I9300DDLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/025> Odin v.3 engine (ID:25)..
<ID:0/025> File analysis..
<ID:0/025> SetupConnection..
<ID:0/025> Initialzation..
<ID:0/025> Get PIT for mapping..
<ID:0/025> Firmware update start..
<ID:0/025> boot.img
<ID:0/025> NAND Write Start!!
<ID:0/025> cache.img
<ID:0/025> hidden.img
<ID:0/025> modem.bin
<ID:0/025> recovery.img
<ID:0/025> system.img
<ID:0/025> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/025> Removed!!
<ID:0/025> Added!!
<ID:0/025> Removed!!
So i downloaded and installed XXALE8 again and this time Odin succesfully installed the rom but im stuck on a bootloop now. What do i do?
ByzLat said:
So i downloaded and installed XXALE8 again and this time Odin succesfully installed the rom but im stuck on a bootloop now. What do i do?
Click to expand...
Click to collapse
Bootloop is an indication that you need to get into recovery now and factory reset. You should be fine from here.
ByzLat said:
So i downloaded and installed XXALE8 again and this time Odin succesfully installed the rom but im stuck on a bootloop now. What do i do?
Click to expand...
Click to collapse
install CWM recovery and enter into recovery using vol up+power+home..from there wipe data+dalvik+cache..this way you will not loose all you data on internal sdcard..
Related
hi
I probably tried loading i9100 rom into my i9100G phone and now its stuck.
I got BSOD (Black Screen Of Death) - see attached jpg.
when i connected the phone back to the pc the odin app recognized it (i guess it remained in download mode).
I loaded the following file GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar and by that i coud enter download mode and recovery mode.
I tried to load ROM stock and failed time and again, each time got the same message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
CAN SOMEONE PLEASE HELP ME TO REVIVE MY PHONE?
Thanks.
itsik888 said:
hi
I probably tried loading i9100 rom into my i9100G phone and now its stuck.
I got BSOD (Black Screen Of Death) - see attached jpg.
when i connected the phone back to the pc the odin app recognized it (i guess it remained in download mode).
I loaded the following file GT-I9100G_ICS_ClockworkMod-Recovery_6.0.1.2.tar and by that i coud enter download mode and recovery mode.
I tried to load ROM stock and failed time and again, each time got the same message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
CAN SOMEONE PLEASE HELP ME TO REVIVE MY PHONE?
Thanks.
Click to expand...
Click to collapse
hi, did you resolve your problem with your phone? i have the same problem, but with a Galaxy Note. if you done it, can you give me a hand? thanks
adyolcian said:
hi, did you resolve your problem with your phone? i have the same problem, but with a Galaxy Note. if you done it, can you give me a hand? thanks
Click to expand...
Click to collapse
Go to Galaxy Note forum.
Sent from my GT-I9100
boki9999 said:
Go to Galaxy Note forum.
Sent from my GT-I9100
Click to expand...
Click to collapse
And the other guy can go to the Gt-I9100GGGGGGGGGG forum.
I had the same problem and I've flashed a stock ICS rom via odin. And do a factory reset/ cache wipe. After that *2767*3855#. It's a hard reset and you'll lose everything but you can use your phone again
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
shinseijuro said:
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
Click to expand...
Click to collapse
try to change the port USB, or try it on another PC if you can
if anyone know, is there any way to change the firmware beside ODIN? thanks
shinseijuro said:
Edi got the same problem. Already tried flash stock 4.0.1 rom. FAILED.
<OSM> Leave CS..
<ID:0/028> Odin v.3 engine (ID:28)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> boot.bin
<ID:0/028> NAND Write Start!!
<ID:0/028>
<ID:0/028> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What should i do now ?
Click to expand...
Click to collapse
This actually happens quite often for me. Just try again and again. You'll get there eventually. Try and do the process as quick possible. That helped me.
Not working. Now my friend cant use his phone and its not even rooted yet! All he wants just a standard pc kies update and kies give him the computer screen.
Now using:
Sony Xperia tipo ST21i
stock 4.0.4
11.0.A.4.22
(rooted, locked bootloader)
Current problem:
Cant get past installing flash drivers in xp.
Hi all,
I have a Samsung Galaxy S3 with a default ROM, rooted and with clockworkmod installed.
Yesterday night I let it charging and working fine. This morning was freezed on the startup screen, the one that says "Samsung Galaxy SIII GT-I93000" and was not possible to go over it. I checked for similar posts in the forum but no one had the same characteristics, all could go further the starting screen.
I tried the next:
- Normal restart: Nothing, same screen
- Take out the battery: Nothing, same screen
- Try to enter in recovery mode (power+home+vol up): Nothing, same screen
- Try to enter in download mode (power+home+vol down): Success, i'm download mode.
What can I do now? there is any chance to enter without re-installing rom and wiping the whole content?
Please, any help is welcome. I'm without mobile meanwhile
Thank you in advance
If the phone does not start in normal mode and recovery mode but it starts in download mode, try to flash a rom Samsung not wipe, if it fails to start still not done with the full wipe rom SAMSUNG
AndroidGaalaxy said:
If the phone does not start in normal mode and recovery mode but it starts in download mode, try to flash a rom Samsung not wipe, if it fails to start still not done with the full wipe rom SAMSUNG
Click to expand...
Click to collapse
Hi, thank you for the fast answer.
I just found the original stock image that i had:
Country/Carrier: Poland (Play)
Date:2012 July
Android: 4.0.4
PDA:I9300XXBLFB
CSC:I9300PRTBLG1
I will turn the phone in download mode and I will connect with Odin.
Sorry about the newbie question: How I flash a new ROM on the phone without wiping all?
Best Regards
Hi,
I try to install flash again the stock ROM and I got this message in Odin.
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300PRTBLG1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I found another post with the same problem: http://forum.xda-developers.com/showpost.php?p=30060308&postcount=23
I tried to restore a PIT file but is failing the whole time
At the end the user told that he brought it to a Samsung service and they changed the "charging regulator" and now the phone is working. :http://forum.xda-developers.com/showpost.php?p=31105754&postcount=34
I don't have any service shop here were I live
Any other idea that I could try?
Thank you in advance
lastminuteproject said:
Hi,
I try to install flash again the stock ROM and I got this message in Odin.
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300PRTBLG1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I'm totally lost now.
any idea?
Thank you in advance
Click to expand...
Click to collapse
Firm Odin, unplugged the USB cable
Open Odin again Selects the file
restart again the phone to download
replug USB cable and try again
And if it still does not try to flash a recovery and tried to boot into recovery mode
lastminuteproject said:
Hi,
I try to install flash again the stock ROM and I got this message in Odin.
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300PRTBLG1_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007>
<ID:0/007> There is no PIT partition.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I'm totally lost now.
any idea?
Thank you in advance
Click to expand...
Click to collapse
Did you try to install a .pit file?
RoelVB said:
Did you try to install a .pit file?
Click to expand...
Click to collapse
This is what causes problem apparently...
Hi
I tried several different PIT files and I always get the same message in Odin:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
@AndroidGaalaxy: I can't enter in recovery mode, just in download mode
I don't know what else to try, please help, some other ideas?
lastminuteproject said:
Hi
I tried several different PIT files and I always get the same message in Odin:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
@AndroidGaalaxy: I can't enter in recovery mode, just in download mode
I don't know what else to try, please help, some other ideas?
Click to expand...
Click to collapse
Try to flash a ROM Samsung Jelly Bean (They Do Requires PDA only normally) and do not put anything in pit
Personally I no longer believe too
Yeah Im having the same problem...
apparently the chip that stores boot got non-functional data or something...missed-up in other words
anyhow...from several threads I looked up,,,,only 2 things can solve this , either Jtag repair the phone (check google) or service the phone, but if the flash counter shows in download mode they might not do it on warranty...
my phone has been in service for 3 days now, still didn't tell me if they'll service on warranty or not, luckily I used triangle reset before, everything shows as official samsung except custom rom.
Thank you for the replies.
Regarding bringing it to the service, I have another small issue. I got my mobile in PL. A friend wanted an internet contract there and with that contract the phone was really cheap, so I pay the phone and he kept the SIM....and I live in Germany
I will try to bring it to any shop, let's see what they tell me.
Another question now: I had an original stock ROM, but I just root it to be able to make full backups. They can realize about this entering just in download mode? Is normal that I see "Odin Mode" when I enter in download mode?
Thank you all
lastminuteproject said:
Thank you for the replies.
Regarding bringing it to the service, I have another small issue. I got my mobile in PL. A friend wanted an internet contract there and with that contract the phone was really cheap, so I pay the phone and he kept the SIM....and I live in Germany
I will try to bring it to any shop, let's see what they tell me.
Another question now: I had an original stock ROM, but I just root it to be able to make full backups. They can realize about this entering just in download mode? Is normal that I see "Odin Mode" when I enter in download mode?
Thank you all
Click to expand...
Click to collapse
Download mode is already integrated in the smartphone by cons they may know that you have changed the phone because this flash counter in download mode they would have had to turn away a triangle reset the counter but hey it is not possible because you can not start the phone
Download Mode
AndroidGaalaxy said:
Download mode is already integrated in the smartphone by cons they may know that you have changed the phone because this flash counter in download mode they would have had to turn away a triangle reset the counter but hey it is not possible because you can not start the phone
Click to expand...
Click to collapse
In my situation, my S3 is in download mode but the computer can not see it through a com (up-to-date Odin and Kies can not see my GS3). What should I do?
Messing with PIT maybee ruined your phone.
If it s in warranty maybee they flash it for you. I´ve experienced that before with no problems but I know that it voyds the warranty flashing PIT and rooting.
Maybee you re lucky in the samsung service, in your position I was that way. Jtag is very risky and voyds warranty forever. If you pay in samsung for the boot repair you continue to have your warranty again and for the price of a Jtag intervention I would pay a bit more and continue having warranty.
S3 frozen on boot screen while rooting
Hello everyone,
I'm new around here and i apologize if posting in the wrong place....
I have a similar problem: I decided to root my S3 (UK unlocked) and followed one of many tutorials on YouTube (made by galaxys3root). Everything seemed to be easy and started well until at the point when the S3 must reboot. At that point the phone got stuck, and the only thing i can do is to go in downloading mode.
Odin gives me this
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> param.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
While the phone is stuck on the boot screen my PC (Win 7 Ultimate) does not recognize the device, while if the phone is in downloading mode, the PC has the driver for it.
I went through a few more topics on this forum which described something similar, tried a few of the suggestions made by others but nothing seems to work.
Does anyone has a solution for this or I should take the phone in service?
I would appreciate any advise!
I'm quite the beginner so if you could use a technical "friendly" language it would be great
Hi all,
I have a Samsung galaxy S3 GT-I9300. 2 days ago it crashed and won't boot anymore. The reason was can't mount /cache, can't mount system ... on recovery mode. I tried only the wipe cache option and it did nothing.
I started looking at the forum to understand how to fix it. I deciced first to make a backup of my data if possible so I downloaded Odin v3.07 and philz_touch_6.07.9-i9300.tar.md5. I read in another thread that we can manage to copy data from the phone using philz tools.
The problem here is that flashing philz tools with Odin fails all the time. Now I can only access the download mode. At boot, I have a "Firmware upgrade encountered an Issue..." I tried with Kies recovery but it failed too.
In my sdcard, I have no folder clockwordmode ! In download mode
PRODUCT NAME : GT-I9300
CUSTOM BINARY DOWNLOAD : Yes (3)
CURRENT BINARY : Custom
SYSTEM STATUS : Ofiicial
I am bit lost as there seem to be a lot of options in other threads. I don'y know where to start or what to do ? is it the PIT files to restore ? the firmware, the kernel ? the whole OS ?
Many thanks
Don't use pit file. pit is Last resort!!!! Get stock firmware from sammobile.com and flash it through Odin. Forget kies. Read about Odin before flashing.
You'll need to flash with a *.pit file, and the ROM downloaded from sammobile in order to restore your device. Use the *.pit file as the absolute last option to restore your phone. It will repartition your phone, and any power loss of either the machine you are flashing from, or your phone will render it a permanent brick.
Thank you
I am downloading the latest firmware from sammobile (1.1 GB) and Odin 3.09. There are specific instructions for Odin on sammobile website so I don't think i'm goint to mess it up. I will let you know if it did work for me.
I tried to flash the image from sammobile but it failed. There is no log I can read to understand why
Here is the name of image I downloaded I9300XXUGML2_I9300FTMGML2_I9300BVUGML1_HOME.tar
Concerning Odin, its the 3.09 GS3 by l0gan
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGML2_I9300FTMGML2_I9300BVUGML1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Shall I try with an older image (this one is the latest) ? or retry by messing the PIT ?
Nand write fail = motherboard replacement.
Keep trying to flash and don't give up but please leave pit till the end. Yes try three part recovery firmware and older firmware "not ics" SDS on ics firmware and you don't want that. But at the end of the day nand write fail means hardware failure.
Hi again,
I succeeded to flash one image from 2013. Odin says PASS!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELL1_I9300FTMELL1_I9300BVELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> system.img
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> cache.img
<ID:0/006> hidden.img
<ID:0/006> modem.bin
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Removed!!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
However, I still have the "Firmware upgrade encountered an issue" at boot I removed the phone when I saw the message Removed in Odin. I am not sure whether it didn't let the process finish well or I did right. Any ideas or suggestions ?
I succeeded to reinstall the latest firmware and I got back the samsung logo at boot. However It still doesn't go any further and no recovery mode ... Is there a way to check the status of the system ?
Omg its alive!! Odin said pass! Just keep flashing that firmware till you get recovery and then factory reset.
Try the rescue firmware in general thread, follow the instructions exactly.
Sent from my GT-I9300 using Tapatalk
Hello
An update of my case. After struggling 2 days with NAND write fail and trying lots of firmwares... I succeeded to install CMW recovery tool. From that, I installed Cyanogenmod 10.0.2. I struggled to make it boot too as it looped on cyanogen logo many times.
Now I must confess that I am afraid of rebooting the phone as I thought it was dead :angel:
Hope it helps someone else :highfive:
Great feed back for others. and go's to show never give up flashing with Odin. Odin is a pain in the ....
Congrats :thumbup:
Hello,
i try to install twrp on my s6 edge, but now it will not start anymore, the screen is following the samsung Logo black.
i try to install the original firmware from sammobile, but it stuck or give me an error.
what can i do? i try on 2 computer, 2 usb cable and and and... its the same all time
can you help me pls?
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCV_G925FAUT1AOCN_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
sure you using latest Odin..? and firmware matches..?
try from odin 1.85 to 3.10 all
What model of s6 edge you haw??Look on samifirmware for yours model.Use odin 3.10.6 i think
and use the right region code BTW branding code..for free Germany it's dbt as example..
I hate to say it, but I have the exact same issue...
I tried to install TWRP, now the screen just goes blank after the Samsung logo.
I have downloaded the latest O2 UK firmware, flashed as normal using odin 3.10.6, and I get a "fail" too
Please could someone suggest something?
Thanks
EDIT: Re-flashed root, and all good again!
Guys i was upgrading official firmware through ODIN, but it failed. Tried flashing TWRP Recovery as well and below error occured. Need help as my S6 Edge 925F is stuck and won't boot. One more thing, i can enter download mode just fine.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
PIT related error bothers me .......
@aneeqkhan I know this thread is a bit dated now, but nobody has replied to you question either? I am trying to recover my friends Galaxy S6 Edge SM-G925I, his bricked after a failed standard OTA update. Flashing stock firmware worked for about 1 week then the whole thing crashed and is un-bootable. Attempting to flash the exact same firmware again in hopes that I could boot into recovery (recovery by button combination DOES NOT WORK!) so was hoping to just boot and factory reset (I was thinking that maybe a data corruption was the cause we didn't wipe his phone because he didn't back it up)...upon putting the device into download mode and flashing the exact same firmware package that worked the week before I get the same error that you are getting? Not only that but none of the claimed fixes online for these devices has worked!?
Note: This is a 100% stock device never had anything flashed to it before I got it and still hasn't had anything custom flashed to it either
I am more interested now if you managed to recover your S6 and if so how did you do it?
Suddenly phone freezed and restarted and asked me to reset to remove encryption
then when i tried formatting using TWRP it displays the following
Unable to open '' to wipe crypto key
unable to format to remove encryption
Updating partition details......
Failed to mount '/efs' (Invalid Argument)'
Failed to mount '/cache' (Invalid Argument)'
Failed to mount '/System' (Invalid Argument)'
Failed to mount '/data' (Invalid Argument)'
Failed to mount '/preload' (Invalid Argument)'
...done
unable to mount storage
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
please let me know how to push CWM from odin . Can you please assist me here
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Help please
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
emptywordsss said:
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
Click to expand...
Click to collapse
Format /cache through recovery (philz). Mounts and Storage --> Format /Cache.
shivadow said:
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I tried flashing with Odin and Heimdall. All i get at the end is failed. Odin fails at NAND and heimdall runs till 100% for all whatever i choose. Suggest me any procedure on how to check if my internal storage is intact and can be retrieved. So that i can atleast sleep peacefully.
reinzl said:
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
RajeshVV said:
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
reinzl said:
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Tried flashing PIT and was unsuccessful. Not sure if the data partition is intact and if so how to know its presence and the status of it.
Anyone solve this problem? I'm using N7100 and get this problem too
Tried to flash PIT with new odin version always noti "failed",
with 3.0.7, 3.0.9, odin freeze at "Get PIT for mapping..", I waited more than 30 minutes but nothing happen,
Tried to flash stock ROM but failed at "NAND Write Start!!"
Someone please help me fix this problem.
Are you using the original Samsung USB cable? Tried other USB cables and USB 2.0 ports?
oh, hi audit13,
Of course I used original Samsung USB cable, I changed some other cables, and USB ports(2.0, 3.0) to test, but nothing new.
I think no one can fix this problem, bring to cell store is the best choice
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
audit13 said:
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
Click to expand...
Click to collapse
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Everytime it end with this failed.
If I flash only PIT, It will stop at
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
I waited for 1 hour but nothing change.
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
audit13 said:
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
Click to expand...
Click to collapse
"the bootloader in the phone is newer than bootloader in the rom"
Sorry, but how to know bootloader in the phone is newer than bootloader in the rom?
I flashed Roms with Android ver 4.4.4, 6.0.1, 7.1.1, and don't know much about bootloader, can you help me find my bootloader ver and find the way to resolve this problem. Thanks