[Q] USB Ethernet (ASIX v4.4 / ICS 4.0.3) - Android Q&A, Help & Troubleshooting

Hello Everyone,
I've been searching the interwebs for the last few days trying to find out where I download a compiled driver, or a way to compile my own for my Acer a500 tablet.
Here's my specs:
Tablet:
Model: A500 (rooted)
Android: 4.0.3(ICS)
Kernel: 2.6.39.4+
USB Ethernet Adapter:
Model: Trendnet TU2-ET100
Chipset: ASIX AX88772
Driver: v4.4 (Android 1,2,3,4)
I have found LOADS of compiled drivers for Android 3.2.x, but nothing for 4.0.x This is my first tablet and I just bought it yesterday, so I'm trying to learn as much as I can about it, please forgive me if I seem noobish here, i am.. I have already downloaded the latest ASIX driver (v4.4) from the chipset manufacturer, but when I try to compile it with the "make command" I get a return that it is not a recognized command.
I have also read multiple times that the Android OS already has ASIX drivers embedded, however when I plug my adapter into the USB slot I do not see any lights illuminate. I attempted to provide the adapter with dhcp in terminal, using;
Code:
dhcpcd eth0
setprop net.dns1 8.8.8.8
setprop net.dns2 8.8.4.4
I don't get any error messages, but nothing is happening either.
I decided to check the device after plugging it in by using dmesg, it reported the following:
Code:
usb 1-1: new high speed USB device number 5 using tegra-ehci
usb 1-1: New USB device found, idVendor=0b95, idProduct=7720
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AX88x72A
usb 1-1: Manufacturer: ASIX Elec. Corp.
usb 1-1: SerialNumber: 0BAA93
What do I need to do to get this USB Adapter to work?

Fervid said:
I've been searching the interwebs for the last few days trying to find out where I download a compiled driver, or a way to compile my own for my Acer a500 tablet.
Click to expand...
Click to collapse
Just updating this.
After spending the amount of time I did trying to find a solution. I ended up giving up and rolling back my a500 to Android 3.2.1 Now using the appropriate asix.ko driver for my kernal the external usb adapter works perfectly. I guess I will just have to hold off on upgrading to ICS until its had the chance to be in the market for a bit longer.
Ferv.

I just found a way to do this for the Samsung Galaxy S3, documented here: http://forum.xda-developers.com/showthread.php?p=37548841#post37548841
Hope that helps point you in the right direction...

Related

USB Tethering not working

Hi,
I'm on CM7.2 last RC.
I'm not able to get usb tether to work, I tried with many different kernels.
In logcat seems to be everything ok.
In Windows 7 I'm getting Device Manager's Error 10 on the NDIS peripheral (I'm using latest drivers from LG) while in Ubuntu I'm getting
Code:
[ 582.203335] usb 2-1.1: USB disconnect, device number 3
[ 582.410299] usb 2-1.1: new high-speed USB device number 4 using ehci_hcd
[ 582.579620] usbcore: registered new interface driver cdc_ether
[ 582.586001] rndis_host 2-1.1:1.0: RNDIS init failed, -32
[ 582.586056] rndis_host: probe of 2-1.1:1.0 failed with error -32
USB debug and storage works fine.
Any idea?
It does not work..
Sent from my LG-P500 using Tapatalk 2
It's a known bug. Try using PDA net for the moment. It works fine for me.
Thanks for answers
I was afraid it was just only me because USB Tethering it's not mentioned in any rom/kernel post
pda net is very buggy for me
for me too, im using clockwork tether right now

[Q] how to connect Ethernet via usb to htc flyer with usb ethernet?

i want to connect my ethernet to my flyer, i found some andriod drivers in the driver cd provided with the usb ethernet, canu tell me how to conncet the ethernet to the tab with cool honey 3d rom installed. im new to rooting and all please provide me clear steps plz..

[Q] mtk6572 - usb host, otg

hi everyone. i have a tablet aliexpress . com/snapshot/313581209 . htm and there in description is "usb host 1", but there is not usb on this tablet. i try to connect usb via otg - tablet doesnot see it and no power on usb.
does mtk6572 support usb host or otg? mabey producer forgot to install drivers for this?
doest anyone has datasheet for mtk6572?
here bbs.52rd.com/Thread-266424-1-1.html is datasheet - can anyone download it? thx
here download.eeworld.com.cn/download/rubyonrails/249524 can anyone download?
mtk6572 datasheet
can any one tell how to connect usb host or otg? i mean just data cables. no more
macepa said:
can any one tell how to connect usb host or otg? i mean just data cables. no more
Click to expand...
Click to collapse
I've try to connect a USB Stick on a Samsumg S3... it work out the box: a pop up appears on Android und leds blinking on the device.
Then I try with another smartphone with a MTK6572 (Alcatel one touch idol mini), but it didn't work. I've use the same cable and the same USB Sitck
Maybe you will be luckier... but be sure to use a OTG cable, the 4th pin (sense) must be grounded to the 5th pin (GND) on the micro USB connector.
alcantor said:
Maybe you will be luckier... but be sure to use a OTG cable, the 4th pin (sense) must be grounded to the 5th pin (GND) on the micro USB connector.
Click to expand...
Click to collapse
did it but nothing changed

Install ethernet driver?

Hello!
I want to connect my SGS-II i9100 via ethernet!
I have a OTG USB cable and a USB ethernet adapter ASIX AX88179.
On my Galaxy-Tab-S2 (original Rom) ist works out of the box, but not on the i9100.
On the i9100 I've installed LineageOS 14.1, Kernel: DorimanX V13.0b005 and TWRP 3.1.0-0.
I've found this older thread about ethernet driver on an Eee-Pad, the driver package should include the right driver for me:
https://forum.xda-developers.com/showthread.php?t=2039886
I tried it out but on Termux I got the following error-message:
insmod: can't insert '/system/lib/modules/usb_ethernet/asix.ko': invalid module format
what does this mean?
I'm not familiar with linux... unfortunately.
Is there a way to install this driver in such a way or is kernel compiling the only way to integrate drivers?
I've found the original driver: http://www.asix.com.tw/FrootAttach/driver/AX88179_178A_LINUX_DRIVER_v1.19.0_SOURCE.tar.bz2
Can anyone please help me?
thanks and best regards!!

Add usb to ethernet support to tablet Teclast t20

Hello,
i would like to allow my tablet Teclast T20 to connect to ETHERNET via USB.
I already own a USB to ETHERNET ADAPTER, that i use succesfully with my windows 10 laptop.
It is an ASIX AX88772 USB2.0 to Fast Ethernet Adapter, and i found that for this adapter is available a driver (source) in ASIX website
https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=86;71;101&PLine=71
that should work for Linux and Android.
But when i connect the adapter to my tablet using an OTG Usb to microusb cable, and connect the ethernet cable to the adapter, nothing happens.
Searching on the web, i found that with Teclast T10, that is and older version of my tablet (that was without 3G module), was possible to connect to ethernet via a similar adapter with same chipset as mine : UtechSmart USB 2.0 to 10/100 Ethernet Network Adapter (Model US-USB2-E100).
Take a look here (min 5:55) Video
https://www.youtube.com/watch?v=bIKpsqEMvHs
My tablet Teclast T20 has cpu MT6797X (X27) and runs on Android Nougat 7.1 and has connectivity WiFi + LTE
The Teclast T10, instead, has cpu MT8176 and runs on Android Nougat 7.0 and has only WiFi connectivity
So perhaps the kernel is different and the drivers pre-built in the kernel are different. How can i check if an USB to Ethernet driver is already built in the kernel of my tablet? And, if it is not available, how can i add the driver to my tablet? I know that i should have the sources of my kernel, but i think it will be difficult to get them from Teclast. Any suggestion?
Thank you!
no answer yet?
nobody knows something about this issue?

Categories

Resources