Hey all,
I'll try keep this short and sweet. I just flashed Siyah Kernel 1.5.4 on my GS3 (currently running Omega v26) and it flashed fine, rebooted the phone and logo showed up all good. However, past that stage the screen goes black and I'm not sure if it's actually booted into the phone.
I can press the menu/back buttons and they respond, but nothing shows up on screen. I can also enter recovery/download mode, so I've tried reflashing the original CF-root kernel and still no luck.
Currently going to try a nandroid restore but does anyone have ideas what the case might be and how to fix it?
Cheers,
poopehz
You need siyah 1.6x for roms based on jb leaks.
Sent from my GT-I9300 using Tapatalk 2
Did you wipe cache partition and dalviks?
Sent from my GT-I9300 using xda app-developers app
Theshawty said:
You need siyah 1.6x for roms based on jb leaks.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank you Theshawty, this was it. I automatically assumed the kernel I downloaded from Omega Kitchen app would be compatible.. apparently not.
Appreciate the help.
Hi all, so can I use syah 1.6 kernel on omega 26.1? Did somebody test it?
Sent from my GT-I9300 using xda app-developers app
Silhaut1 said:
Hi all, so can I use syah 1.6 kernel on omega 26.1? Did somebody test it?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes you can, I'm running it now.
Sent from my GT-I9300 using xda app-developers app
Related
Hi I'm using siyah kernal and if I'm correct its supposed to boot into that red recovery? Well mine usually does, and now it keeps booting into a purple recovery called siyah recovery... and siyah kernal will not work none of my buttons work on it... andorst of all my phone will not boot up it keeps taking me straight to recovery I can't even get into download mode... and no I haven't even done any recent changes... any fix?
Sent from my SCH-I905 using xda premium
Which version of Siyah are you running?
I believe its 2.6.11
Sent from my SCH-I905 using xda premium
Smacdallas said:
I believe its 2.6.11
Sent from my SCH-I905 using xda premium
Click to expand...
Click to collapse
it's the kernel for the correct device rite? i had 2.6.11 up until last night and it always worked and was always red.
Smacdallas said:
I believe its 2.6.11
Sent from my SCH-I905 using xda premium
Click to expand...
Click to collapse
That makes sense. There were two versions of 2.6.11. The first one was red and worked fine. The second "purple" one was giving recovery errors, like the ones you mentioned. Did you just upgrade to 2.6.11?
Try flashing this version of 2.6.11, if you're able to flash.
http://forum.xda-developers.com/showpost.php?p=21864326&postcount=1068
Otherwise, get the 2.6.12 tar file from the OP in that thread, or get any "tar" version of Siyah from Gokhanmoral's website (other than 2.6.11) and flash it through ODIN.
Hey thanks for the tips, but for some odd reason the purple recovery began working
Sent from my SCH-I905 using xda premium
Hi, im trying to install the CM10.1 on my phone, i already flashed the ClockWorkMod-Recovery 5.5.0.4 on the phone. I tried with Cloclworkmod recovery 6.0.0.1 too and i got struck on status 7. I also tried downloading another ROMs from cyaongenmod's page, but i get the same error. Thanks in advance for your help.
Flash CWM 6.0.1.2 or later.
CWM 6.0.1.2
przemcio510 said:
Flash CWM 6.0.1.2 or later.
Click to expand...
Click to collapse
Hi przemcio510, where can i find it, I just found 6.0.1.1. Thank you for replying
Status 7 generally means you are attempting to install a ROM that does not match the model number for your device.
Where did you download the ROM, and what is your exact model number? (the model number will be printed on a label underneath the battery)
While going from xxslj to cm10.1 I faced the same problem. I restored my previous backup which was rootbox and then I installed CM10.1 and it worked without any problem.
Of course this will work only if you have backup..
Else you download siyah kernel for s2 from gokhanmoral.com flash it via Odin and then try to install whatever you want to
Sent from my Xoom using xda app-developers app
But don't use Siyah with CM10.1!
Your device won't run properly
Try dorimanx 7.33
Sent from my GT-I9100 using xda app-developers app
Dorimanx worked
linzinator said:
but don't use siyah with cm10.1!
Your device won't run properly
try dorimanx 7.33
sent from my gt-i9100 using xda app-developers app
Click to expand...
Click to collapse
i love you dorimanx worked!!!!!!!!!!!!!!!!!! Thanks a lot!
No problem
Sent from my GT-I9100 using xda app-developers app
i'm to getting the same error, i'm on rooted & leaked XXLSJ firmware.
Whenever i try to flash the ROM....'it says installation aborted, status 7' something like that.
i'm sure that i'm installing the correct rom with my version, i also did by doing factory reset & then trying, bust still getting same error
what should i do now?
sorayakana said:
i love you dorimanx worked!!!!!!!!!!!!!!!!!! Thanks a lot!
Click to expand...
Click to collapse
Can u provide me the link for 7.33 bcs I cant find it in here, dont know why!!
Sent from my GT-I9100 using xda premium
ssbnasa said:
Can u provide me the link for 7.33 bcs I cant find it in here, dont know why!!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Search dorimanx in "google" , and hit the second result i cant give you the exact link because i dont got the 10 posts XD
Hello,
First of all I'm a complete noob in S2 android stuff.
On the beginning I've installed jellybam ROM but then the problem appeared. After rebooting my phone just won't find the internal memory. Once it finds it other time not. I couldn't use my phone like that so I've installed jelly king ROM v.1.7 (by a mistake) + Dorimanx-V5.92 kernel. In this ROM everything worked fine. No problems with the memory. After that I've noticed that there's a newer version (1.9). So I decided to flash it. Everything seemed to be fine but the problem came back. So my question is: do you have any solution for it? Have you had such a problem and how did you solve it? Might it be a kernel problem?
Sent from my GT-I9100 using xda app-developers app
Odp: Problem with internal memory
Anyone?
Sent from my GT-I9100 using xda app-developers app
jakuburban said:
Hello,
First of all I'm a complete noob in S2 android stuff.
On the beginning I've installed jellybam ROM but then the problem appeared. After rebooting my phone just won't find the internal memory. Once it finds it other time not. I couldn't use my phone like that so I've installed jelly king ROM v.1.7 (by a mistake) + Dorimanx-V5.92 kernel. In this ROM everything worked fine. No problems with the memory. After that I've noticed that there's a newer version (1.9). So I decided to flash it. Everything seemed to be fine but the problem came back. So my question is: do you have any solution for it? Have you had such a problem and how did you solve it? Might it be a kernel problem?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
may be kernel issue. You can flash official samsung 4.1.2 firmware via odin and see the problem still exists.
Odp: Problem with internal memory
kmaq said:
may be kernel issue. You can flash official samsung 4.1.2 firmware via odin and see the problem still exists.
Click to expand...
Click to collapse
Hmm. now I'm on jelly king v.1.7 with this dorimax kernel and it works pretty good. But I would like to change to this jellybam ROM but this internal memory issue keeps me away from doing that. Can you recommend me some good kernel for this ROM? Dorimax doesn't work. I'll have to repair it today.
Sent from my GT-I9100 using xda app-developers app
jakuburban said:
Hmm. now I'm on jelly king v.1.7 with this dorimax kernel and it works pretty good. But I would like to change to this jellybam ROM but this internal memory issue keeps me away from doing that. Can you recommend me some good kernel for this ROM? Dorimax doesn't work. I'll have to repair it today.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
you can try Philz or Siyah kernel.
Odp: Problem with internal memory
kmaq said:
you can try Philz or Siyah kernel.
Click to expand...
Click to collapse
Already tried them, but nothing changes. I have made some tests how to fix it and "fix permissions" seems to be working for now. However I'll see tomorrow, if the problem doesn't return.
Sent from my GT-I9100 using xda app-developers app
Odp: Problem with internal memory
So what I did was:
-wipe cache
-mount emmc/ preload/ sdcard/ efc
-fix permissions
This helped but this doesn't work permanently.
However I had to change to other ROM because of deep sleep issues
Sent from my GT-I9100 using xda app-developers app
I m using i777 from last two years on various roms & no problem. A week back i flashed aokp latest build and twice i get blank screen with Kernel Panic Mode. Then i have to reboot. (everything else working absolutely fine)
Sent from my SGH-i777 using Tapatalk 4 Beta
After installing aokp jb latest rom error Kernal Panic Mode appears after every couple of days. Anybody having this kernal panic error
Sent from my SGH-i777 using Tapatalk 4 Beta[/QUOTE]
Sent from my SGH-i777 using Tapatalk 4 Beta
AOKP JB you mean Android 4.2.2?
I use Task's Rom with STi kernel(v.2.38). No such things.
Yup aokp jb 4.2.2. Donno why this kernel panic upload mode error appears occasionally. I wiped everything & reflashes but same problem. Shall i change kernel to sti or ajk
Sent from my SGH-i777 using Tapatalk 4 Beta
chacha123 said:
Yup aokp jb 4.2.2. Donno why this kernel panic upload mode error appears occasionally. I wiped everything & reflashes but same problem. Shall i change kernel to sti or ajk
Sent from my SGH-i777 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Do preload also....or use mr-cook script one is light other is full wipe .....preload is place where leftover stays on there and sometime makes problem right away or produce problem overtime. ....so try this
Sent from my SAMSUNG-SGH-I777 using xda premium
Seems that I can no longer flash custom roms. I am currently stuck on 4.3 uk stock rom.
I noticed everytime I flash a stock rom my camera will get the "warning camera failed" and black screen. Godd this is so frustrating!
Has anyone have issues like this? I have downgraded to even 4.1.2 stock roms and I won't have the camera issue. But when I put on a custom rom. Bam! My camera isnt working anymore
This blows!
Sent from my GT-I9300 using xda app-developers app
I meant when I install a custom rom.. my camera fails XD
Also anyone knows any workaround for this?
Sent from my GT-I9300 using xda app-developers app
Evaravenspell said:
I meant when I install a custom rom.. my camera fails XD
Also anyone knows any workaround for this?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
WhicH ROM are you interested in.
I have installed temasek 4.4 and found a fix for camera. Works perfect
Evaravenspell said:
I meant when I install a custom rom.. my camera fails XD
Also anyone knows any workaround for this?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I tried almost all 4.3 roms. I wanted to use the bungkhahe rom or soemthing like that but it had the camera fix.
It dint work?
Sent from my GT-I9300 using xda app-developers app
Need a XXUGMJ9 Stock Kernel
I may get this sorted if i install a custom rom and then flash a stock kernel back. Problem is i searched everywhere for this kernel on its own to flash with CWM or Odin.. Does anyone have this kernel?
NVM GOT IT SOLVED~