Hi Everyone, Just wondering if I have the latest software, because I think my software might be causing the problem that my phone reboots after any installation of any ROM. I"m rooted with CF-root, CWM, SU, CWM Recovery, etc.
My baseband = I9300XXLFB
Kernel =
3.0.15-983563-user
[email protected] #1
SMP PREEMPT Tue Jul 31 19:37:49 KST
2012
Build: IMM76D.I9300XXBLH1
is everything updated?
The latest version is LIB official jelly bean, if you haven't yet, you should receive a software update in the next few days
Sent from my GT-I9300 using xda premium
melemed said:
Hi Everyone, Just wondering if I have the latest software, because I think my software might be causing the problem that my phone reboots after any installation of any ROM. I"m rooted with CF-root, CWM, SU, CWM Recovery, etc.
My baseband = I9300XXLFB
Kernel =
3.0.15-983563-user
[email protected] #1
SMP PREEMPT Tue Jul 31 19:37:49 KST
2012
Build: IMM76D.I9300XXBLH1
is everything updated?
Click to expand...
Click to collapse
For this problem
If you can't, remove the battery to turn it off, pop the battery back in, then hold Volume Up, Home, and Power to boot into the recovery.
Once in the recovery do a full wipe.
If you are flashing a ROM it's always suggested to do a full wipe before flashing the ROM.
If wiping doesn't work then restore for a previous backup (I hope you did a backup before you did whatever you did since you weren't being detailed in what you were doing at the time).
For update read here. http://www.sammobile.com/firmware/
Here some more information on my phone:
says my AP: I9300XXBLH1, CP: I9300XXLFB, and CSC: I9300ODDBLG2
What do I need to do in order to get the 4.1.1 update? How can I flash the baseband to the JB one?
Product Code: GT-I9300RWDINU
PDA: I9300XXBLH1
Phone: I9300XXLFB
CSC: I9300ODDBLG2
They're all completely different, none have the same endings, how do I update them so it shows up on Kies? or so I can get OTA updates?
melemed said:
Product Code: GT-I9300RWDINU
PDA: I9300XXBLH1
Phone: I9300XXLFB
CSC: I9300ODDBLG2
They're all completely different, none have the same endings, how do I update them so it shows up on Kies? or so I can get OTA updates?
Click to expand...
Click to collapse
Read here http://forum.xda-developers.com/showthread.php?t=1646610
Is that safe to flash with Odin from my current firmware? Or will it brick me?
Check the latest firmware available for your region on www.Sammobile.com.
If you are having latest firmware then wait for updates and if not then flash the latest firmware via odin after downloading from www.Sammobile.com for your region.
Sent from my GT-I9300 using Tapatalk 2
Related
I have a Galaxy SII and I want to update it to ICS. I Live in New Zealand on the vodafone network.
I have tried using Kies except it doesn't support updating and I don't know why!
Please help!
doed ur coutry has ics upgrade via kies....
check *#1234# and post...
Well, you can always go down the other road and skip Kies, flashing an ICS rom from the forums, of which are a lot good available, I'm very happy with one as well.
That is, if you're happy to leave the Samsung stock rom path.
You'll find all the info in the development section for the SGSII.
In reply
After putting in the code...
PDA : I9100ZSKI3
PHONE : I9100XXKI3
csc : I9100OZSKI3
Build Info : Fri Sep 23 19:48:32 KST 2011
If that's what you wanted? rocky23
thinkharry said:
After putting in the code...
PDA : I9100ZSKI3
PHONE : I9100XXKI3
csc : I9100OZSKI3
Build Info : Fri Sep 23 19:48:32 KST 2011
If that's what you wanted? rocky23
Click to expand...
Click to collapse
i think rocky was saying do you have ics ready for your region yet??
but i answer it for you yes it does and
Here is your answer first one on top of list !
Thanks! So shouldn't I be able to update via kies then?
thinkharry said:
Thanks! So shouldn't I be able to update via kies then?
Click to expand...
Click to collapse
kies is sh*t only use it to install usb drivers then remove from desktop use odin 1.85 to flash or mobile odin app on play store
you can update to ics simply via odin. its the easiest method. just goto intratech's thread of official ics roms and choose the one you want + the same thread also has a good tutorial on how to use odin.
How To UnRoot And Clear Binary Count For My SGS2 G
Here Is My Phone Info
=========================
Android Version
4.0.4
==========================
Baseband version
I9100GDXLP6
==========================
Kernel Version
3.0.33-CM-g6f8e729
[email protected] #1
SMP PREEMPT
Thu Jul 1200:08:45
EDT 2012
===========================
Build Number
IMM76I_RR
============================
Resurrection version
RESURRECTION_REMIX_V11_M6-I9100G
wyang0120 said:
How To UnRoot And Clear Binary Count For My SGS2 G
Here Is My Phone Info
=========================
Android Version
4.0.4
==========================
Baseband version
I9100GDXLP6
==========================
Kernel Version
3.0.33-CM-g6f8e729
[email protected] #1
SMP PREEMPT
Thu Jul 1200:08:45
EDT 2012
===========================
Build Number
IMM76I_RR
============================
Resurrection version
RESURRECTION_REMIX_V11_M6-I9100G
Click to expand...
Click to collapse
use usb jig
havenoname.304 said:
use usb jig
Click to expand...
Click to collapse
usb jib cannot clear binary count on ICS
I am totally new at this but i done it like this (but you will loose rom and kernel)
Flashed mine phone to stock Android (gingerbred ver.). I used India
then over odin flashed bootloader wich clear counter
Gingerbread Bootloader : DOWNLOAD
PS
Take it easy on me if i wrote something stupid
and sorry for bad English
Go here.
wyang0120 said:
How To UnRoot And Clear Binary Count For My SGS2 G
Here Is My Phone Info
=========================
Android Version
4.0.4
==========================
Baseband version
I9100GDXLP6
==========================
Kernel Version
3.0.33-CM-g6f8e729
[email protected] #1
SMP PREEMPT
Thu Jul 1200:08:45
EDT 2012
===========================
Build Number
IMM76I_RR
============================
Resurrection version
RESURRECTION_REMIX_V11_M6-I9100G
Click to expand...
Click to collapse
First of all, pls don start a new thread coz this belongs to General Q&A thread
1. Download the stock Firmware and Kernel
Link:
http://forum.xda-developers.com/showthread.php?t=1754158
2. Download and use odin to flash it.
Link:
http://teamhacksung.org/download/samsung/GT-I9100G/Odin3-v1.85.zip
3. Once u flash it, u ll b in stock firmware n ur binary count will reset to original.
Note:
U will lose root. And I am not responsible if u brick ur device. Use it at ur own risk.
What is bootloader??how about after i'm downgraded my ics to GB 2.3.6 stock firmware without flashing bootloader,can i'm using usb jig to reset binary counter and remove yellow triangle from my gt i9100g??
Sent from my GT-I9100G using xda app-developers app
Use triangle away app from chainfire before flashing stock rom.
Sent from my GT-I9100 using xda premium
Is it work on gt i9100g??this is my only hp and i'm still love it so much..hehe..
Sent from my GT-I9100G using xda app-developers app
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
blakeks said:
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
Click to expand...
Click to collapse
thats the stock kernel ma8, if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Or better mate just flash syiah kernel much better then cf + u get tunning options
Sent from my GT-I9100 using xda premium
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
And its brig bug safe
Sent from my GT-I9100 using xda premium
Sun90 said:
thats the stock kernel ma8, if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Click to expand...
Click to collapse
+1
blakeks said:
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
Click to expand...
Click to collapse
Doesn't really matter what your kernel version is. It doesn't stop you from doing anything especially when its going to be replaced with CWM or Siyah
Sent from Jelly Fuelled SGS2
Bluetooth problem
Hi,
I after upgradin my Firmware with Kiest to 4.0.4. I rooted my device again, : Sun90 replied
if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Click to expand...
Click to collapse
I found chaifire CF-Root-SGS2_XX_OXA_LPW-v5.5-CWM5 and yes the phone was rooted again, But when i got in my car i could not get a bluetooth connection and when I try to enable bluetooth in the settings menu it can't no error no nothing it reverts to the off setting.
I dont know if anyone els has the same problem or if there are other problems I hav not experienced yet and they may have a sollution i haven't found yet could you be so kind as to share?
Model number: GT-I9100
Android version: 4.0.4
Baseband version: I9100XXLQ6
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Original
Kernet-Version: 3.0.15-I9100XXLPW-CL413606 [email protected] #3 SMP PREEMPT Mon 30 21:54:21 KST 2012 After Root
Build Number: IMM76D.XWLPW
Use Siyah kernel.
And XWLPW is NOT the same as XXLPW (!).
przemcio510 said:
Use Siyah kernel.
And XWLPW is NOT the same as XXLPW (!).
Click to expand...
Click to collapse
Your phone begs for Siyah
straightup100 said:
Dear sir, please would you please, please make an XWLPW INSECURE KERNEL for rooting my samsung galaxy s2. thank you very very much.
Click to expand...
Click to collapse
Use custom kernel like Siyah or Speedmod to avoid brick bug
Poroto said:
Your phone begs for Siyah
Click to expand...
Click to collapse
What?
New Siyah Version
Hi
i have found siyah version v.5.0.1 should i use it or should i use v.4.1.5 version?
Thanks..
5.0.1 supports ics or jb custom rom,i never tried it to a stock rom before,but siyah has a thread to it,you can search it for further info.
Sent from my GT-I9100 using xda premium
I flashed in the leaked jellybean rom in two galaxy i9100 phones after which one phone was getting network service and the other was not. After i dialed *#1234# on the working one and it showed:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: I9100XXLSI
Build Info: Tue Nov 6 02:17:01 KST 2012
When i did the same in the phone that was not receiving network signal i got this:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: Unknown
Build Info: Tue Nov 6 02:17:01 KST 2012
Why didn't the CSC file flash into the phone?
narell said:
I flashed in the leaked jellybean rom in two galaxy i9100 phones after which one phone was getting network service and the other was not. After i dialed *#1234# on the working one and it showed:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: I9100XXLSI
Build Info: Tue Nov 6 02:17:01 KST 2012
When i did the same in the phone that was not receiving network signal i got this:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: Unknown
Build Info: Tue Nov 6 02:17:01 KST 2012
Why didn't the CSC file flash into the phone?
Click to expand...
Click to collapse
corrupted? forgotten?
...how about flash jb's LS1 modem?
How did you flash anyways? mobile odin?
gastonw said:
corrupted? forgotten?
...how about flash jb's LS1 modem?
How did you flash anyways? mobile odin?
Click to expand...
Click to collapse
i flashed using odin v1.85 in my pc with the PDA, CSC and MODEM files for the leaked jb rom. can i reflash just the CSC file using odin?
narell said:
i flashed using odin v1.85 in my pc with the PDA, CSC and MODEM files for the leaked jb rom. can i reflash just the CSC file using odin?
Click to expand...
Click to collapse
.
You can flash that modem via odin, or any other modem.
You could also flash it via CWM.
You can also try re-flashing the whole jb package again.
Hello,
About a half year ago I lost mij IMEI. I used a custom rom and then tried to flash back to my stock rom without making a backup... I had to use the UK firmware that im still using today, this had something to do with the basebands (was told me):
Current firmware i'm using:
Androidversion: 4.1.2, baseband version I9300XXEMG4, kernelversion: 3.0.31-1314436 [email protected] #1 SMP PREEMPT Tue Jul 16 20:28:36 KST 2013, buildnummer JZO54K.I9300XXEMG4
Click to expand...
Click to collapse
Now I see there is a new firmware for my country (Netherlands)
New firmware:
Model: GT-I9300
Country: Netherlands
Version: Android 4.3
Changelist: 2191747
Build date: Tue, 26 Nov 2013 08:03:22 +0000
Product Code: PHN
PDA: I9300XXUGMK6
CSC: I9300PHNGMK1
MODEM: I9300XXUGMK6
Click to expand...
Click to collapse
I thought maybe this new firmware has the same basebands as I am currently using. So my question: Should I flash the new firmware that is available for my country or do I still have to use the UK version? My goal is to have my phone as original as possible. I know some stuff about rooting but i'm sertainly not a pro. If you guys need more information or screenshot in order to help me please tell me! You are my last hope...
Thanks you very much!
Greetings
Questions go in the q&a forum, report your own post and ask a moderator to move it.
Your imei problem was likely due to efs folder changes samsung introduced. If it works on EMG4 then it should be okay on GMK6.
Backup your efs before you do anything.
Sent from my GT-I9300 using Tapatalk
Thanks
Thanks, i'll try tonight! Maybe someone could post a link with a tutorial how to back up EFS. Not just for me, but for everyone that has similair problems! If it worked i'll let you know!
EDIT: My phone needs to be rooted to backup the EFS, but it's not rooted. I'm afraid that when I root my phone I lose my IMEI like before. What should I do? Just flash the stock rom of root it first and then try to back it up (with the risk I lose my IMEI and can't go back to my current using firmware, and then flash the stock rom...
I've downloaded the new firmware and when I extract the zip file, there is only these two files:
-I9300XXUGMK6_I9300PHNGMK1_I9300XXUGMK6_HOME.tar
-SS_DL.dll
Please help me (and many others) to solve this problem. Thanks a lot!
dzjoepy said:
Please help me (and many others) to solve this problem. Thanks a lot!
Click to expand...
Click to collapse
Just flash the new firmware thru Odin. Check in youtube how to use ODIN.
You have to choose that tar file under PDA in Odin.
There should not be any problem. But you will loose all softwares,contacts,sms etc. The phone will be as good as comes from factory.
KSKHH said:
Just flash the new firmware thru Odin. Check in youtube how to use ODIN.
You have to choose that tar file under PDA in Odin.
There should not be any problem. But you will loose all softwares,contacts,sms etc. The phone will be as good as comes from factory.
Click to expand...
Click to collapse
I flashed it, and it worked! Thanks a lot!