I flashed in the leaked jellybean rom in two galaxy i9100 phones after which one phone was getting network service and the other was not. After i dialed *#1234# on the working one and it showed:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: I9100XXLSI
Build Info: Tue Nov 6 02:17:01 KST 2012
When i did the same in the phone that was not receiving network signal i got this:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: Unknown
Build Info: Tue Nov 6 02:17:01 KST 2012
Why didn't the CSC file flash into the phone?
narell said:
I flashed in the leaked jellybean rom in two galaxy i9100 phones after which one phone was getting network service and the other was not. After i dialed *#1234# on the working one and it showed:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: I9100XXLSI
Build Info: Tue Nov 6 02:17:01 KST 2012
When i did the same in the phone that was not receiving network signal i got this:
PDA: I9100XXLSJ
PHONE: I9100XXLS6
CSC: Unknown
Build Info: Tue Nov 6 02:17:01 KST 2012
Why didn't the CSC file flash into the phone?
Click to expand...
Click to collapse
corrupted? forgotten?
...how about flash jb's LS1 modem?
How did you flash anyways? mobile odin?
gastonw said:
corrupted? forgotten?
...how about flash jb's LS1 modem?
How did you flash anyways? mobile odin?
Click to expand...
Click to collapse
i flashed using odin v1.85 in my pc with the PDA, CSC and MODEM files for the leaked jb rom. can i reflash just the CSC file using odin?
narell said:
i flashed using odin v1.85 in my pc with the PDA, CSC and MODEM files for the leaked jb rom. can i reflash just the CSC file using odin?
Click to expand...
Click to collapse
.
You can flash that modem via odin, or any other modem.
You could also flash it via CWM.
You can also try re-flashing the whole jb package again.
Related
Sorry if this is an obvious subject, but I'm kind of in doubt.
I was wondering how I could check what the stock firmware was that came with the phone. I'd like to re-flash it back to stock so I could get the stock updates again.
Right now when I enter *#1234# it says;
PDA: I9100XXKH3
PHONE: I9100XXKH3
CSC: I9100OXAKH3
Build Info: Fri Aug 12 11:20:51 KST 2011
Is the "KH3" part also the stock version? Because that's the version of the custom ROM I flashed.
What region are you in? Did you buy it of a specific carrier?
Sent from my GT-I9100 using Tapatalk
Netherlands, unbranded from Hi (KPN).
Ni7ro X said:
Netherlands, unbranded from Hi (KPN).
Click to expand...
Click to collapse
Here:
http://forum.xda-developers.com/showthread.php?t=1113928
Look for KPN in first post and flash one of those.
Thanks a lot, I didn't find that post yet! And if I reset the custom binary count with a jig it'll be under warranty again after this flash right?
Stock rom no root and custom rom counter zero = Samsung Warranty valid .
jje
I have a Galaxy SII and I want to update it to ICS. I Live in New Zealand on the vodafone network.
I have tried using Kies except it doesn't support updating and I don't know why!
Please help!
doed ur coutry has ics upgrade via kies....
check *#1234# and post...
Well, you can always go down the other road and skip Kies, flashing an ICS rom from the forums, of which are a lot good available, I'm very happy with one as well.
That is, if you're happy to leave the Samsung stock rom path.
You'll find all the info in the development section for the SGSII.
In reply
After putting in the code...
PDA : I9100ZSKI3
PHONE : I9100XXKI3
csc : I9100OZSKI3
Build Info : Fri Sep 23 19:48:32 KST 2011
If that's what you wanted? rocky23
thinkharry said:
After putting in the code...
PDA : I9100ZSKI3
PHONE : I9100XXKI3
csc : I9100OZSKI3
Build Info : Fri Sep 23 19:48:32 KST 2011
If that's what you wanted? rocky23
Click to expand...
Click to collapse
i think rocky was saying do you have ics ready for your region yet??
but i answer it for you yes it does and
Here is your answer first one on top of list !
Thanks! So shouldn't I be able to update via kies then?
thinkharry said:
Thanks! So shouldn't I be able to update via kies then?
Click to expand...
Click to collapse
kies is sh*t only use it to install usb drivers then remove from desktop use odin 1.85 to flash or mobile odin app on play store
you can update to ics simply via odin. its the easiest method. just goto intratech's thread of official ics roms and choose the one you want + the same thread also has a good tutorial on how to use odin.
Hi Everyone, Just wondering if I have the latest software, because I think my software might be causing the problem that my phone reboots after any installation of any ROM. I"m rooted with CF-root, CWM, SU, CWM Recovery, etc.
My baseband = I9300XXLFB
Kernel =
3.0.15-983563-user
[email protected] #1
SMP PREEMPT Tue Jul 31 19:37:49 KST
2012
Build: IMM76D.I9300XXBLH1
is everything updated?
The latest version is LIB official jelly bean, if you haven't yet, you should receive a software update in the next few days
Sent from my GT-I9300 using xda premium
melemed said:
Hi Everyone, Just wondering if I have the latest software, because I think my software might be causing the problem that my phone reboots after any installation of any ROM. I"m rooted with CF-root, CWM, SU, CWM Recovery, etc.
My baseband = I9300XXLFB
Kernel =
3.0.15-983563-user
[email protected] #1
SMP PREEMPT Tue Jul 31 19:37:49 KST
2012
Build: IMM76D.I9300XXBLH1
is everything updated?
Click to expand...
Click to collapse
For this problem
If you can't, remove the battery to turn it off, pop the battery back in, then hold Volume Up, Home, and Power to boot into the recovery.
Once in the recovery do a full wipe.
If you are flashing a ROM it's always suggested to do a full wipe before flashing the ROM.
If wiping doesn't work then restore for a previous backup (I hope you did a backup before you did whatever you did since you weren't being detailed in what you were doing at the time).
For update read here. http://www.sammobile.com/firmware/
Here some more information on my phone:
says my AP: I9300XXBLH1, CP: I9300XXLFB, and CSC: I9300ODDBLG2
What do I need to do in order to get the 4.1.1 update? How can I flash the baseband to the JB one?
Product Code: GT-I9300RWDINU
PDA: I9300XXBLH1
Phone: I9300XXLFB
CSC: I9300ODDBLG2
They're all completely different, none have the same endings, how do I update them so it shows up on Kies? or so I can get OTA updates?
melemed said:
Product Code: GT-I9300RWDINU
PDA: I9300XXBLH1
Phone: I9300XXLFB
CSC: I9300ODDBLG2
They're all completely different, none have the same endings, how do I update them so it shows up on Kies? or so I can get OTA updates?
Click to expand...
Click to collapse
Read here http://forum.xda-developers.com/showthread.php?t=1646610
Is that safe to flash with Odin from my current firmware? Or will it brick me?
Check the latest firmware available for your region on www.Sammobile.com.
If you are having latest firmware then wait for updates and if not then flash the latest firmware via odin after downloading from www.Sammobile.com for your region.
Sent from my GT-I9300 using Tapatalk 2
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
blakeks said:
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
Click to expand...
Click to collapse
thats the stock kernel ma8, if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Or better mate just flash syiah kernel much better then cf + u get tunning options
Sent from my GT-I9100 using xda premium
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
And its brig bug safe
Sent from my GT-I9100 using xda premium
Sun90 said:
thats the stock kernel ma8, if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Click to expand...
Click to collapse
+1
blakeks said:
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
Click to expand...
Click to collapse
Doesn't really matter what your kernel version is. It doesn't stop you from doing anything especially when its going to be replaced with CWM or Siyah
Sent from Jelly Fuelled SGS2
Bluetooth problem
Hi,
I after upgradin my Firmware with Kiest to 4.0.4. I rooted my device again, : Sun90 replied
if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Click to expand...
Click to collapse
I found chaifire CF-Root-SGS2_XX_OXA_LPW-v5.5-CWM5 and yes the phone was rooted again, But when i got in my car i could not get a bluetooth connection and when I try to enable bluetooth in the settings menu it can't no error no nothing it reverts to the off setting.
I dont know if anyone els has the same problem or if there are other problems I hav not experienced yet and they may have a sollution i haven't found yet could you be so kind as to share?
Model number: GT-I9100
Android version: 4.0.4
Baseband version: I9100XXLQ6
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Original
Kernet-Version: 3.0.15-I9100XXLPW-CL413606 [email protected] #3 SMP PREEMPT Mon 30 21:54:21 KST 2012 After Root
Build Number: IMM76D.XWLPW
Use Siyah kernel.
And XWLPW is NOT the same as XXLPW (!).
przemcio510 said:
Use Siyah kernel.
And XWLPW is NOT the same as XXLPW (!).
Click to expand...
Click to collapse
Your phone begs for Siyah
straightup100 said:
Dear sir, please would you please, please make an XWLPW INSECURE KERNEL for rooting my samsung galaxy s2. thank you very very much.
Click to expand...
Click to collapse
Use custom kernel like Siyah or Speedmod to avoid brick bug
Poroto said:
Your phone begs for Siyah
Click to expand...
Click to collapse
What?
New Siyah Version
Hi
i have found siyah version v.5.0.1 should i use it or should i use v.4.1.5 version?
Thanks..
5.0.1 supports ics or jb custom rom,i never tried it to a stock rom before,but siyah has a thread to it,you can search it for further info.
Sent from my GT-I9100 using xda premium
Hello Guys , i have some problems after i upgraded my GT-I9300 to the latest firmware
Model: GT-I9300
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 21:02:26 KST 2013
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6
these are the issues that i have currently with my device
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby )
- Random Freezing
- Stuttering music playback with stock Samsung music app
i read that these problems solved in that new firmware I9300XXUGMK6 !!!!!
so is there anything that van be done to solve these issue or i will have to downgrade to the old 4.1.2 again ?? kindly advise .
memoooo500 said:
Hello Guys , i have some problems after i upgraded my GT-I9300 to the latest firmware
Model: GT-I9300
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 21:02:26 KST 2013
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6
these are the issues that i have currently with my device
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby )
- Random Freezing
- Stuttering music playback with stock Samsung music app
i read that these problems solved in that new firmware I9300XXUGMK6 !!!!!
so is there anything that van be done to solve these issue or i will have to downgrade to the old 4.1.2 again ?? kindly advise .
Click to expand...
Click to collapse
Although I am using custom rom. I am still based on mk6 but I am not experiencing those problems.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
JellyYogurt said:
Although I am using custom rom. I am still based on mk6 but I am not experiencing those problems.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
So what is wrong with mine , aren't they the same or what ? when u use odin do u use Re-partition option ? or not
memoooo500 said:
So what is wrong with mine , aren't they the same or what ? when u use odin do u use Re-partition option ? or not
Click to expand...
Click to collapse
I dun use odin. Nvr used odin in my entire life. I use recovery mode to root and flash.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
JellyYogurt said:
I dun use odin. Nvr used odin in my entire life. I use recovery mode to root and flash.
Sent from my GT-I9300 using xda app-developers app
Give a thank if I helped you
Click to expand...
Click to collapse
Thanks man , so do u have any suggestions ? And any idea why I'm getting these issues ??
Never tick the re-partition option, it can brick your phone.
For your issues I would first recommend a factory reset from inside rom - settings, accounts. This will format internal sd card so backup your data to external sd.
If still the same then download the full GML2 rom from sammobile, check md5 then flash using odin. Follow the instructions in the official rom thread (general forum) exactly.
In each case test before you restore/install any apps or mods.
memoooo500 said:
Thanks man , so do u have any suggestions ? And any idea why I'm getting these issues ??
Click to expand...
Click to collapse
Dude after flash mk6 firmware...factory reset ur phone..go to recovery wipe data
memoooo500 said:
Hello Guys , i have some problems after i upgraded my GT-I9300 to the latest firmware
Model: GT-I9300
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 21:02:26 KST 2013
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6
these are the issues that i have currently with my device
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby )
- Random Freezing
- Stuttering music playback with stock Samsung music app
i read that these problems solved in that new firmware I9300XXUGMK6 !!!!!
so is there anything that van be done to solve these issue or i will have to downgrade to the old 4.1.2 again ?? kindly advise .
Click to expand...
Click to collapse
Try same latest custom ML2 rom.
Надіслано від мого GT-I9300, використовуючи Tapatalk
memoooo500 said:
Hello Guys , i have some problems after i upgraded my GT-I9300 to the latest firmware
Model: GT-I9300
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 21:02:26 KST 2013
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6
these are the issues that i have currently with my device
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby )
- Random Freezing
- Stuttering music playback with stock Samsung music app
i read that these problems solved in that new firmware I9300XXUGMK6 !!!!!
so is there anything that van be done to solve these issue or i will have to downgrade to the old 4.1.2 again ?? kindly advise .
Click to expand...
Click to collapse
im also planning to downgrade from 4.3 to 4.1.2. i already experience freezing and the game " stop working" frequently. i never experience this kind of problem in my grand quattro 4.1.2...
memoooo500 said:
Hello Guys , i have some problems after i upgraded my GT-I9300 to the latest firmware
Model: GT-I9300
Version: Android 4.3
Changelist: 2168382
Build date: Thu, 28 Nov 2013 21:02:26 KST 2013
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6
these are the issues that i have currently with my device
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby )
- Random Freezing
- Stuttering music playback with stock Samsung music app
i read that these problems solved in that new firmware I9300XXUGMK6 !!!!!
so is there anything that van be done to solve these issue or i will have to downgrade to the old 4.1.2 again ?? kindly advise .
Click to expand...
Click to collapse
I'm experiencing the Wake up lag as well with the I9300XXUGMK6.