Hello I need a solution for this Motorola Atrix.
Error Has Failed to Boot and then off to the second, I can not get over anything with any key combination.
I do not know why try method, even from here in XDA but the PC does not recognize me as I can not enter either the Fastboot.
Appears Failed to Boot and then off very quickly.
With all my soul appreciate if someone can help me, thank you very much to all.
I've charged the battery with a universal charger, and the low battery message disappeared but failed to boot still there
HELP! PLEASE! As I enter fastboot mode? somehow!?
This is not a hardbrick, so please change the title of the topic so as to not confuse others, and next time use proper and accurate terminology.
You need to charge your battery (in a friend's phone or get an external charger), and then use this tool (option 3).
Download link for the tool: http://cleanimport.xda/index.php?threads/1583199/ (bottom of the first post)
Not recognized by USB port, neither recognizes the Script
ravilov said:
This is not a hardbrick, so please change the title of the topic so as to not confuse others, and next time use proper and accurate terminology.
You need to charge your battery (in a friend's phone or get an external charger), and then use this tool (option 3).
Download link for the tool: http://cleanimport.xda/index.php?threads/1583199/ (bottom of the first post)
Click to expand...
Click to collapse
Apparently a HardBrick as I charged the battery to maximum with a universal charger and I can not enter fast boot mode to perform the script. Do not step on that screen and I used all keystrokes, has relieved me telling me not a HardBrick.
I am a relative novice, could you tell me how I apply fruitcake without the need for USB port recognizes the Atrix?
After charging the battery get the same message but without "the battery is too low to flash". Still does not recognize the USB port.
You tell me how do I make the Laptop I recognize your phone? Thank you very much for your concern and response.
Do you have all the proper USB drivers installed? I don't use windows so I don't know about specifics. Search through the forum or through Motorola's site for proper driver download.
Ya lo he intentado todo
ravilov said:
Do you have all the proper USB drivers installed? I don't use windows so I don't know about specifics. Search through the forum or through Motorola's site for proper driver download.
Click to expand...
Click to collapse
I have all the drivers I mentioned in the topic of XDA, entire recipe to make the script but I still did not recognize it. No longer do or key combination to use, nothing more "failed to boot" and "NV Flash" a second before shutting off.
VOL + even left without battery, then connect the battery hold, light it and neither USB nor recognizes the RSD Lite or Script.
I've tried everything with Windows, but I also use Ubuntu, if you know how to make it recognize the USB with any method or any OS I ask that you share.
I'm desperate and do not know what else to try ...
Your going to have to flash back to your old firmware but you will lose root access- samething happen to me so i had a buddy charge my battery than i flashed back to 2.3.6 using RSD lite and i lost my root access but my atrix was back
Sent from my MB860 using xda app-developers app
Fredcho said:
I've tried everything with Windows, but I also use Ubuntu, if you know how to make it recognize the USB with any method or any OS I ask that you share.
Click to expand...
Click to collapse
Linux should recognize the device immediately, there are no drivers required. If yours is not recognized even under Linux, then there's something seriously wrong and I'm clueless. Sorry.
To confirm is the phone recognized under Linux, try running lsusb.
ravilov said:
Linux should recognize the device immediately, there are no drivers required. If yours is not recognized even under Linux, then there's something seriously wrong and I'm clueless. Sorry.
To confirm is the phone recognized under Linux, try running lsusb.
Click to expand...
Click to collapse
Neither Linux recognizes, is that no screen passes Failed to boot, then displays "Entering NV Flash Recovery" and then goes away.
If I leave it in the socket without battery appears EXACTLY the same but with "The battery is too low to flash" (as I show in the picture) and if I leave it attached to the power is not turned off, it stays on but does not pass that screen and I've tried all the combinations.
Please someone help me, is too much money for it to become brick: (
Fredcho said:
Neither Linux recognizes, is that no screen passes Failed to boot, then displays "Entering NV Flash Recovery" and then goes away.
If I leave it in the socket without battery appears EXACTLY the same but with "The battery is too low to flash" (as I show in the picture) and if I leave it attached to the power is not turned off, it stays on but does not pass that screen and I've tried all the combinations.
Please someone help me, is too much money for it to become brick: (
Click to expand...
Click to collapse
Look in the "answers" thread at the top of the forum. If you are lucky, something there might help. Start with soft brick, then try hard brick.
upndwn4par said:
Look in the "answers" thread at the top of the forum. If you are lucky, something there might help. Start with soft brick, then try hard brick.
Click to expand...
Click to collapse
I've seen that a user has been able to relive the HardBrick (Nottach)
I want to know exactly what steps performed to see if I can also try to revive.
I've tried all the key combinations that did made him specifically?
Fredcho said:
I've seen that a user has been able to relive the HardBrick (Nottach)
I want to know exactly what steps performed to see if I can also try to revive.
I've tried all the key combinations that did made him specifically?
Click to expand...
Click to collapse
Sorry, I can't help with that. All I know is what I read in Nottach's post.
Did you try the automated tool that can help recover from a soft brick?
i have the same problem with my atrix.. is there a video on how to fix it?
upndwn4par said:
Sorry, I can't help with that. All I know is what I read in Nottach's post.
Did you try the automated tool that can help recover from a soft brick?
Click to expand...
Click to collapse
Yes, I tried but the computer does not recognize me when I connect the computer USB port and no way to enter fastboot mode.
Well I think that it is hard brick you can try to make a "factory cable" and if only function wher you can go is nvflash then you can try to get new moherboard or try sent to official motorola service.
P.S
In china is some motherboard repair companys but it is expensive.
firecode95 said:
Well I think that it is hard brick you can try to make a "factory cable" and if only function wher you can go is nvflash then you can try to get new moherboard or try sent to official motorola service.
P.S
In china is some motherboard repair companys but it is expensive.
Click to expand...
Click to collapse
Well, it seems a little difficult considering that not much of this cable, some other solution, or is the only thing I have left?
Someone probao something different with success?
Fredcho said:
Yes, I tried but the computer does not recognize me when I connect the computer USB port and no way to enter fastboot mode.
Click to expand...
Click to collapse
If you flash the original rom with RSDlite, it must recognize the phone in the rsd mode even thought that phone just stays in the "failed to boot" state. I had once this problem of not being able to boot and somewhere i read that the phone automatically is in rsd and it really worked.
Try just to power up your phone, open RSDlite and check if it appears in the list, if yes, just flash the correct rom and everything will be fine again.
Good luck
joelorona said:
If you flash the original rom with RSDlite, it must recognize the phone in the rsd mode even thought that phone just stays in the "failed to boot" state. I had once this problem of not being able to boot and somewhere i read that the phone automatically is in rsd and it really worked.
Try just to power up your phone, open RSDlite and check if it appears in the list, if yes, just flash the correct rom and everything will be fine again.
Good luck
Click to expand...
Click to collapse
It does not work because RSD Lite does not recognize it. Anyone else?
someone said we can try to revive our phone by using nvflash. but it has problem that we need SBK! so we have to urge motorola release SBK!
Related
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
pscpa said:
I have been posting (and have had some nice people try to help) in the How to Recover Fascinate from any Brick thread for about a week and can't seem to find a solution. I have also searched the internet high and low looking for a solution with no success. Hopefully someone here has had the same issues and can point me in the right direction.
I rooted the Fascinate using a one click method and was able to get a Titanium backup but could not get into the proper recovery to do a system image. Stupidly, I flashed SP Recovery from within ROM Manager. From that moment on I when the phone is turned on it gets to the "Samsung" screen and locks.
I did my research and found out all I needed to do to fix is install ODIN and reflash the stock ROM again. The problem is that ODIN will not recognize the phone. I start ODIN, pull the phone battery, plug the phone into USB cable, push volume down to get the phone into download mode (Yellow Triangle). I keep getting USB Device Not Recognized errors from Win 7 (64-bit).
I tried installing Heimdall to load the correct drivers but it doesn't see the device either. I can connect my Droid or Droid 2 and Heimdall sees immediately so I know it is not a problem with the software or cable.
I have tried to install the correct USB drivers (even the ones listed on this site). I tried installing Kies and it doesn't see the phone either.
Since the phone is looping at the "Samsung" screen I can't change any settings in the phone as some have suggested. I really do not have any more ideas other that to use this phone as a very expensive door stop. Hopefully, someone here can help. Thanks in advance!!!
Click to expand...
Click to collapse
Control Panel/ User Account/ User Account Control settings- set to- Never notify- restart computer.
Should recognize phone. Reset to default when done and restart. Windows crap!
Thanks but this setting has always been set to "Never Notify"......any other ideas...please
I don't know nothing about it but the guy said " reset to default and restart (again)??
Sent from my SCH-I500 using xda premium
Followed the directions exactly. I think the OP wanted me to reset to default after I was done flashing. This is so strange....I figure if the people on XDA can't figure this out the phone is doomed.
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
schu9120 said:
Have you tried a different USB plug on the computer? Or a different USB cord? Or a different computer?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I had to use a laptop to access my Fascinate because my desktop wouldnt even show it as unrecognized hardware, it was like it didnt even exist... I went in device manager and uninstalled all my usb devices, rebooted with everything but mouse/kb unplugged, installed SDK drivers for Nexus S, rebooted again (probably not needed but better safe than sorry) and I can now Odin into my phone... Hope this helps ya man... sucks bricking a phone
The Heimdall drivers won't work. Kies won't recognize it if it won't boot. There should be an option in Kies to install the driver. Drop down box in the top left corner. Did you try to install your driver that way?
have you installed the driver yet? samsung driver?
ok guys, first things first. YES i did search, i read threads for hours. So if your just gonna come to bash on me... get off it.
So i had a bad flash, oh no. Phone was stuck in a bootloop, got it to download mode and put it thru odin. Well odin said FAILED. now i can still get into DL mode but its no longer a bootloop, now its a lil picture of a phone linked to a computer when i turn it on.
SO heres the prob, i can get into DL mode, but odin refuses to recognize my phone. Ive tried other usb ports, other cords, unistalled and reinstalled odin and the drivers. USB debugging is off says aio toolbox. So what do i do now? any suggestions im not thinking of?
Any help is greatly appreciated and will b thanked. =)
Phone to PC screen still should be able to flash through.
Have you tried a different computer? One that your phone has never been in contact with?
What was the FAILED error when you tried to ODIN initially?
Can you get into recovery by chance?
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
WhiteBoyAwesome said:
i have tried a different computer, but not one it has never been on b4.
And toast, i actually dont know if i can get into recovery. Im about to look up how and try that
Click to expand...
Click to collapse
Gingerbread bootloader uses this combo:
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
If you have Froyo bootloader:
For Recovery - Both Volume Keys + Power Button
For Download - Both Volume Keys and Connect USB Cable
alright, i can use the hardware buttons to get into download just fine. But when i try to get into recovery it only gives me the Phone -- ! -- Computer icon. ITs getting annoying lol
Ok. I didn't figure that would work, but it wasn't going to hurt anything to try do you have any friends with Macs? You could try it on one of them with Heimdall. That would be another option to try.
Also, check out this thread: http://forum.xda-developers.com/showthread.php?p=8149503
Read all the posts, there is some good stuff in there.
+1 on recommended thread. It sounds just like your issue. Definitely try the Heimdall AIO one click t959 for Windows.
sent from the depths of helly bean
nothin yet :/
Google eugenes froyo that does not brick, read the op carefully, because after you odin the tar file, you will have an error message, thats ok, odin eclair and you should pass.
Read it 10 times, you'll reboot in cwm with an error message, ok, reboot, download, eclair.
stupid question sorry, but do you have sdk platform tools installed?
im not sure. i downloaded something called sdk manager, but it closes the moment u open it.
SDK platform tools is a large program, But if your computer has recognized your phone up till now, you probly have the right drivers, by the way have you cleaned your usb port? toothbrush and an electronics cleaner or alcohol very lightly, never know.
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
WhiteBoyAwesome said:
ok guys. heres the update. I tried all the links you guys have kindly tossed my way. nothin. Im on a different computer even and downloaded the drivers, odin, toolbox, etc. The phone still isnt recognized. I Have no clue why, is the reason cause usb debugging is off? the only 2 screens i can get to r download and phone ! computer. Am i bricked for good??? =(
Click to expand...
Click to collapse
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
You are putting your phone into download mode before using odin right? You must have your phone in download mode for odin to recognize it. I'm guessing you have done this but I wasn't sure after reading through this thread, hope you get up and running again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
yep. tried multiple combos as well
Hey I think you should follow this..
1. Connect your phone with computer without battery
2. Press volume down and power button simantaniously for getting download mod
3. After 30 or 60 second pull back battery into phon with holding buttons
4. Odin ditect your device almost surely...
Thanks..
Sent from my GT-I5510 using xda premium
Ok, I just went through this over the past weekend with a spare Vibe that I have. Odin would not recognize it at all for my. I would here the Ding and then nothing. No yellow COM box, no driver installation, nothing.
Here is what I did:
First I went into Device Manager and with the phone plugged in (needs to be plugged in so you can see the yellow!), I uninstalled everything with Samsung's name tagged to it (including my SGS3 and SGS2 drivers).
Then I went here and downloaded and installed Heimdall (take note that you have to make sure that libusb-1.0 is correctly installed). There is an exe file in there (might be in the Heimdall thread here in the Vibe section), that allows you to update the drivers. That is where you would replace the Windows with libusb-1.0.
Then I plugged in my USB to PC and to phone and put it in Download mode. Nothing. So I left it plugged into the phone still but unplugged from PC and move ports. I have 3 ports and believe it or not, the one farthest from the power source/MB was the one that work. As soon as I plugged it in, I heard the Ding and saw the box pull up auto-installing the drivers.
After that, I went to Utilities in Heimdall to make sure detected. It was and I flashed Mr_Psycho's package (no pun intended ) via the normal Heimdall instructions.
Believe me, I have spent a ton of time on this and troubleshooted everything from dead USB to dead motherboard. It was a real PITA.
Edit:: If you need any of the files, Heimdall version or Drivers, just PM me and I will send them to you. You are not Bricked, just your PC's vision is clouded a bit.
woodrube i greatly appreciate the mass amount of help. i will try all the above as soon as im home and report back to u
alright, i deleted everything, reinstalled, tried heimdall still nothing. I am in download mode but laptop wont recognize anything. it says the correct drivers are installed but then says usb device not recognized, this is killing me as i need my phone imma post a video tonight of what im doing, hopefully someone sees im doing something wrong
Hey guys.
I was installing a rom on my phone (which I have done many times before). It was the CM 10.1 rom this time around. I got it installed per instructions and then I got the boot loop. I Figured, no biggy, been through this before. So I pulled the battery and went to boot back into the boot loader (vol - and pwr) and I get nothing. The phone wont turn on at all. It does nothing when I put in the charger as well (no led, etc). Did I some how get bricked?
Any help would be appreciated. Thanks!
Strange.
when you connect your device to the charger is there atleast a red dim light? you will have to look closely.
You might also wanna try a different charger or connect your phone to your computer and see if it recognizes it.
Astrikz said:
Strange.
when you connect your device to the charger is there atleast a red dim light? you will have to look closely.
You might also wanna try a different charger or connect your phone to your computer and see if it recognizes it.
Click to expand...
Click to collapse
No dim light. The computer dings when I plug it in, but adb can't do anything with it.
Connect your device to your computer again and on your computer go to (guessing your on windows) Start- Computer. If you see this "QHSUSB_DLOAD" under devices with with removable storage then your phone is bricked. Theres still hope.. You can try unbricking your device from the two options listen bellow.
Dexter's HTC Unbricking Project.
Closeone's HBOOT Downgrade Toolkit Live
Closeone's guide you can skip the bricking steps because well your device is already bricked..
Astrikz said:
Connect your device to your computer again and on your computer go to (guessing your on windows) Start- Computer. If you see this "QHSUSB_DLOAD" under devices with with removable storage then your phone is bricked. Theres still hope.. You can try unbricking your device from the two options listen bellow.
Dexter's HTC Unbricking Project.
Closeone's HBOOT Downgrade Toolkit Live
Closeone's guide you can skip the bricking steps because well your device is already bricked..
Click to expand...
Click to collapse
Thanks for the Help Astrikz. I tried the 2nd method with the CD and it just sits there with "Waiting for device". I do have QHSUSB_DLOAD in windows, so it is bricked. But it must be REALLY bricked. Bummer.
radink said:
Thanks for the Help Astrikz. I tried the 2nd method with the CD and it just sits there with "Waiting for device". I do have QHSUSB_DLOAD in windows, so it is bricked. But it must be REALLY bricked. Bummer.
Click to expand...
Click to collapse
Waiting for device? What step does it show this?
You should be able to skip to step 17 and start from there.
Astrikz said:
Waiting for device? What step does it show this?
You should be able to skip to step 17 and start from there.
Click to expand...
Click to collapse
Step 21.
radink said:
Step 21.
Click to expand...
Click to collapse
& you pressed the volume down button while connecting your device? If so then I'm out of ideas to be able to boot up your phone. If you have insurance on the phone i recommend taking it to a sprint store .
Astrikz said:
& you pressed the volume down button while connecting your device? If so then I'm out of ideas to be able to boot up your phone. If you have insurance on the phone i recommend taking it to a sprint store .
Click to expand...
Click to collapse
Yeah tried it. New phone is on the way. Glad I have the insurance.
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.
okay so here is the situation i am currently in.
i have a lg optimus f3 so its called on the tmobile network (lg-p659) as far as i have read on this forum my phone is currently "bricked". Right now what i'm trying to achieve is to get my phone into download mode, but as of far i have tried all button combo's and all the little battery tricks. i can't get my phone to do a damn thing. it just stays on a black screen no led backlight nothing.
Although when i do hook up my phone without the battery i get a prompt to install a driver for a so called "QHSUSB_DLOAD" i can not find the driver for this so when i try to run the KDZ program it fails at the point of trying to connect to the phone.
Please help... Thanks in advanced
EDIT: i no longer require help with this phone, as far as i'm concerned this thread is now dead and im moving on to flashing via ADB
*BUMP* :angel:
blood angte said:
okay so here is the situation i am currently in.
i have a lg optimus f3 so its called on the tmobile network (lg-p659) as far as i have read on this forum my phone is currently "bricked". Right now what i'm trying to achieve is to get my phone into download mode, but as of far i have tried all button combo's and all the little battery tricks. i can't get my phone to do a damn thing. it just stays on a black screen no led backlight nothing.
Although when i do hook up my phone without the battery i get a prompt to install a driver for a so called "QHSUSB_DLOAD" i can not find the driver for this so when i try to run the KDZ program it fails at the point of trying to connect to the phone.
Please help... Thanks in advanced
Click to expand...
Click to collapse
Instructions :-
1.LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.1 0.1.exe download and install it
2. Download firmware file P65910b_05.kdz
3. Disable antivirus software.
4. Get into emergency mode: power off the phone, press and hold volume up and connected the usb cable..let the device be installed.
5. Open KDZ_FW_UPD.exe.
6. "Type" choose 3GQCT.
7. Choose in "Phonemode": Emergency.
8. Click the folder icon and choose the kdz file.
9. Click Launch software update and play freecell or something on your PC for next few minutes till its done.
10. You are done..now jump and punch the air with your fist and do a wooooohooo!
kishore4 said:
Instructions :-
1.LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.1 0.1.exe download and install it
2. Download firmware file P65910b_05.kdz
3. Disable antivirus software.
4. Get into emergency mode: power off the phone, press and hold volume up and connected the usb cable..let the device be installed.
5. Open KDZ_FW_UPD.exe.
6. "Type" choose 3GQCT.
7. Choose in "Phonemode": Emergency.
8. Click the folder icon and choose the kdz file.
9. Click Launch software update and play freecell or something on your PC for next few minutes till its done.
10. You are done..now jump and punch the air with your fist and do a wooooohooo!
Click to expand...
Click to collapse
I appreciate the help and the good laugh i had at line 10 but i cannot get my phone into emergency mode. when i tried the button combo and connected the usb it just failed instantly to install and still was not detected on the KDZ program. the device that im getting when i hook up the usb is called "QHSUSB_DLOAD" and even with all the drivers i could ever find none of them would work for this and also not be detected in the program.
Perhaps i need to flash a new recovery img to the phone using abd? i dont know, i'm still learning about all this stuff and slowly getting one step further ahead of the crowd, so to speak.
Maybe JTAG would be your best bet.
blood angte said:
I appreciate the help and the good laugh i had at line 10 but i cannot get my phone into emergency mode. when i tried the button combo and connected the usb it just failed instantly to install and still was not detected on the KDZ program. the device that im getting when i hook up the usb is called "QHSUSB_DLOAD" and even with all the drivers i could ever find none of them would work for this and also not be detected in the program.
Perhaps i need to flash a new recovery img to the phone using abd? i dont know, i'm still learning about all this stuff and slowly getting one step further ahead of the crowd, so to speak.
Click to expand...
Click to collapse
i guess you have windows 8 or 8.1 installed..and you have to turn off the driver signing check first like this tutorial :disabling-signed-driver-enforcement-on-windows-8
and then install this driver :-
Qualcomm-Allx86-drp.exe
try this..n good luck :good:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
*Closed until further notice*
dyczone said:
Maybe JTAG would be your best bet.
Click to expand...
Click to collapse
yeah i was hoping it would not come down to that... If it is my only option i guess i will find someplace that can do it for me. cause i dont have the hardware to do such a thing none the less even figure out how to do it. other than that i think i might just retire this phone until something else comes up.
Thanks to all the peeps who replied giving info, much kudo's to you guys. :good:
kishore4 said:
i guess you have windows 8 or 8.1 installed..and you have to turn off the driver signing check first like this tutorial :disabling-signed-driver-enforcement-on-windows-8
and then install this driver :-
Qualcomm-Allx86-drp.exe
try this..n good luck :good:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
Click to expand...
Click to collapse
so i tried the driver pack and it did indeed find the correct driver for my phone although KDZ still wont detect my phone... bummer :crying:
kishore4 said:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
Click to expand...
Click to collapse
I did not see this the last post i made so i will look into learning how to flash via adb. many thanks good sir, when i return i shall be a master of adb flashing... lol or at least try my best. looking into guides right now on this very fourm. :good:
Any suggestions?
blood angte said:
I did not see this the last post i made so i will look into learning how to flash via adb. many thanks good sir, when i return i shall be a master of adb flashing... lol or at least try my best. looking into guides right now on this very fourm. :good:
Any suggestions?
Click to expand...
Click to collapse
hey..can you get into recovery or your phone is just dead?
well there are two modes for the device :-
1. power off the the phone and then press volume up and plug in the usb cable while doing that -download mode
2. power off the phone and then press power+ volume up button together and quickly plug in the usb the phone goes into emergency mode
try them both
also check in windows manager if any of the LG modems are active..if thats the case then disable them by right click option and then try KDZ updater and see if it works..if not repeat the points 1 and 2 and shake the life out of your device till it gives up and gets detected haha..also try taking battery off and then putting it back and plugging in usb then only.
and about adb i am not sure if it will work but you can always check if the device is being detected by adb using following command :-
adb devices
P.S. -
check in windows device manager the hardware vendor id of the device and then verify if you have it listed in C:\Users\(your username on pc)\.android\adb_usb.ini
if not then add the entry as
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
0x18D1
0x04E8
the vendor is the 4 digits after 0x like mine device id is 04E8..if yours is not listed then add yours in next line and save it and restart computer and plug in ur device again and check if its detected.
In case there is no .android folder or adb_usb.ini file then downloadattachment, unzip and place it on the right location and restart. check the pictures if you dont get what i am saying..just on case lol