I tried looking for a thread about this matter, but couldn't find anything that exactly matched my problem so here goes:
A while back I rooted my X10 for the first time and installed FreeX10. Eventually, for the sake of getting the Dual Touch update from Sony, I flashed the phone back to its original state with the UXP and updated. At the time I did not intend to go back to FreeX10, I opted to continue using the UXP. However, when I first tried to restore most of my applications, I found I was unable to do so. Paid apps downloaded fine (most of the time) but any free apps I tried to re-download would not. I could tap on the "Start Download" button and the phone would show a notification with a progress bar, but the bar would remain at 0%. If I tapped on the application in the Market again, it would take me to the application's description page as usual but where it would normally show the "downloading" progress bar was just a blank white space. I was unable to resolve this problem so I eventually (with much difficulty trying to re-root and reinstall Titanium Backup without access to the market or a proper File Manager application to install APKs) went back to FreeX10. Surprise surprise, the Market works fine in FreeX10. So here's my issue. I want to flash to phone back to UXP and upgrade to 2.3, but I don't want to encounter the same problem again. Does anyone know if I might encounter the same problem? If so, is there a way to fix the problem?
setting > apps > filter (menu button) > all > download manager > force stop
hit thanks if i helped !
Sent from my X10i using xda premium
As I mentioned previously, I don't want to reinstall the stock (ie. UXP) interface again unless I know for sure whether this will happen. Last time it took some creative tinkering and hours of work to flash back to Free X10 since I couldn't install a proper file manager in order to install APKs directly. I don't want to have to go through all that again and I don't want to get stuck without a working Market.
!!! Help !!! - After rooting my NT & installing the GoLauncher I couldn't access/find B&N's default icons(Library, Web, etc.,...)...I switched back to default launcher and still can't locate them...Seems I now have a "half-baked" system(mixture of B&N and Android Apps)...I downloaded the Nookunrooter.apk in an attempt to re-root my NT later...I got allthe way to the Nook Unroot screen(This application will unroot your NookTablet.....etc....)...I clicked the "NookTablet unroot" window at the bottom and I get "Echo werked" small pop-up in the middle of the screen...
I re-installed the Nookunrooter.apk severaltimes and still get the same error...
I also reset the NT to factory settings(power + n button) severaltimes and still same error...I would greatly appreciate an answwer/resolution tothis...This NT is a christmas gift and obviously cannot be returned...Thank you...
thesal523 said:
!!! Help !!! - After rooting my NT & installing the GoLauncher I couldn't access/find B&N's default icons(Library, Web, etc.,...)...I switched back to default launcher and still can't locate them...Seems I now have a "half-baked" system(mixture of B&N and Android Apps)...I downloaded the Nookunrooter.apk in an attempt to re-root my NT later...I got allthe way to the Nook Unroot screen(This application will unroot your NookTablet.....etc....)...I clicked the "NookTablet unroot" window at the bottom and I get "Echo werked" small pop-up in the middle of the screen...
I re-installed the Nookunrooter.apk severaltimes and still get the same error...
I also reset the NT to factory settings(power + n button) severaltimes and still same error...I would greatly appreciate an answwer/resolution tothis...This NT is a christmas gift and obviously cannot be returned...Thank you...
Click to expand...
Click to collapse
Do you have the ability to do adb, or use terminal emulator?
If so re root your device, by runing NookandZergy.bat.
WARNING: This will erase yoru entire device.
Then install Terminal Emulator, or use adb and issue the following command:
Code:
echo -n '0000' > /bootloader/BootCnt
Then restart your device.
Sorry, I'm a nube at this...Don;t know what adb/Terminal Emulator is/are...
How do I know if I have adb/Terminal emulator on my NT?...
How do I go about installing either?...
Do I need to execute NookandZergy.bat on my NT?...
Please explain...Thank you...
Here's some steps I posted on someone elses topic. I know you said you did the reset but give it a shot:
If it comes to it, power down, hold power and 'n' and it'll turn on, then come to the black background with the n logo then power off. Release just the power button and press and hold again for 7 more times.
On the 9th time just use the power button to turn it on and it'll prompt you with some warnings. Follow through with the continue and it will perform the steps.
BE WARNED: this will perform a complete factory restore so any installed apps will be gone but it won't touch your SD card.
Sent from my HTC Glacier using xda premium
dodgepot said:
Here's some steps I posted on someone elses topic. I know you said you did the reset but give it a shot:
If it comes to it, power down, hold power and 'n' and it'll turn on, then come to the black background with the n logo then power off. Release just the power button and press and hold again for 7 more times.
On the 9th time just use the power button to turn it on and it'll prompt you with some warnings. Follow through with the continue and it will perform the steps.
BE WARNED: this will perform a complete factory restore so any installed apps will be gone but it won't touch your SD card.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
Use this method.
Just turn off the nook tablet, and start it by holding the power and N button. Continue to hold and you will note that the tablet turns on then off. Do this 8 times, and you will be promped for a full factory reset.
Loglud/dodgepot - Thank you very much for your input...Much appreciated...
I was having difficulty following either method, but I came across the following link:
http://forum.xda-developers.com/showpost.php?p=19546639&postcount=13
I followed these instructions which differ slightly, but was able to get a complete factory reset(re-image)...
I will now proceed to re-root my NT & hopefully won't run into any major issues...
Will return if I do and/or have any questions...Thank you again...
thesal523 said:
Loglud/dodgepot - Thank you very much for your input...Much appreciated...
I was having difficulty following either method, but I came across the following link:
http://forum.xda-developers.com/showpost.php?p=19546639&postcount=13
I followed these instructions which differ slightly, but was able to get a complete factory reset(re-image)...
I will now proceed to re-root my NT & hopefully won't run into any major issues...
Will return if I do and/or have any questions...Thank you again...
Click to expand...
Click to collapse
Good luck in your adventures and don't be a stranger!
I posted the [How-to] Quick Access to Nook Tablet's FACTORY RESET Screen in both the General and Development sections of these forums just for these types of situations... a search would have netted you the link. Following that guide will get you back to stock.
Good luck.
O.K., I'm back to square one...I re-rooted my NT for the 4th time(followed Indirect instr. videos 1 & 2) and installed Honeycomb Launcher...After re-rooting I no longer have access to B&N's launcher...According to the video I should be able to flip-flop between B&N's launcher & Honeycomb Launcher by pressing the"n' button twice...If I open Apps. I can see the Apps. that came with my NT...From time to time I get the following error msg.: "The application Honeycomb Launcher (process mobi.SyndicateApps.HCL) has stopped unexpectedly. Please try again"...
Any idea as to what is causing the above msg. and why pressing the "n" button is not allowing me to switch launchers?...I have other questions(e.g.; weather widget not working, how to move files around from-to SD card, etc..,..), but wanted to get past this issue first...Your help is greatly appreciated...
(I'm counting on dodgepot and/or Loglud to come thru again , or anyone for that matter...Again, much appreciate the help)...
thesal523 said:
O.K., I'm back to square one...I re-rooted my NT for the 4th time(followed Indirect instr. videos 1 & 2) and installed Honeycomb Launcher...After re-rooting I no longer have access to B&N's launcher...According to the video I should be able to flip-flop between B&N's launcher & Honeycomb Launcher by pressing the"n' button twice...If I open Apps. I can see the Apps. that came with my NT...From time to time I get the following error msg.: "The application Honeycomb Launcher (process mobi.SyndicateApps.HCL) has stopped unexpectedly. Please try again"...
Any idea as to what is causing the above msg. and why pressing the "n" button is not allowing me to switch launchers?...I have other questions(e.g.; weather widget not working, how to move files around from-to SD card, etc..,..), but wanted to get past this issue first...Your help is greatly appreciated...
(I'm counting on dodgepot and/or Loglud to come thru again , or anyone for that matter...Again, much appreciate the help)...
Click to expand...
Click to collapse
there have been reports of honeycomb launcher force closing a lot. that is according to reviews from the android market...
the only suggestion i can give you is to move the honeycomb launcher apk to system/app if it is not there already
after that go to the tgps launcher and manage apps, try clearing data and cache for honeycomb launcher and reboot. hopefully after that you won't experience any more force closes for a while.
+1 I tried hcl a little and experienced issues so went to adw launcher ex. Much better, imho.
Sent from my HTC Glacier using xda premium
thesal523 said:
According to the video I should be able to flip-flop between B&N's launcher & Honeycomb Launcher by pressing the"n' button twice.
Click to expand...
Click to collapse
Do you know if you're using a modified SystemUI.apk? It sounds like you might be. There is one (that was not made when those videos were made) that removes the little B&N popup menu entirely. If you want that, you might need to revert to the stock SystemUI.apk.
The Home Switcher app will allow you to change your home button functionality as you like.
ENJOY!
Thank you all for your quick response...Much appreciate it...I apologize, but being a nubie & not that familiar with the terminologies I need some direction...
I recall that the last question during the rooting process had a reference to the
SystemUI.apk & required a Y or N response...I don't recall what I replied(Y or N)...Getting a little confused with the different options...
1- How do u move the HCL apk -> system/app?...
2- Why move the HCL apk -> system/app?...
3- How to access tgps launcher and manage apps, clearing data and cache for
HCL...
4- Should the HCL be uninstalled after performing the above followed by the
ADW Launcher EX install?...
5- Can I download(install) the ADW Launcher EX from the Android market?...
6. Once the ADW Launcher EX is installed how do I flip-flop between B&N
& ADW launcher?...
I read somewhere that to get rid of Honeycomb Launcher u can go to the Android Market > My Apps and click on HCL Launcher and then Uninstall...
And something about moving it 1st to /system/app rather than /data/app(???)...With all the choices getting confused with the proper course of action...Again, I would appreciate instructions for the best/quickest(safest) approach to correct this issue...
I really appreciate your willingness to help, not to mention that this is a learning experience for me and(hopefully) I will be able to help others as a result...
Many thanks...
thesal523 said:
Thank you all for your quick response...Much appreciate it...I apologize, but being a nubie & not that familiar with the terminologies I need some direction...
I recall that the last question during the rooting process had a reference to the
SystemUI.apk & required a Y or N response...I don't recall what I replied(Y or N)...
Click to expand...
Click to collapse
Sounds like you entered Y. If you want to be able to switch between the B&N launcher and a custom launcher, you are going to need the stock SystemUI.apk.
thesal523 said:
Getting a little confused with the different options...
1- How do u move the HCL apk -> system/app?...
Click to expand...
Click to collapse
You should be able to find it in /data/app. Move it to /system/app, and reinstall (and maybe reboot).
thesal523 said:
2- Why move the HCL apk -> system/app?...
Click to expand...
Click to collapse
I think some believe this improves stability. However it prevents the market from updating the app. I use ADW EX and have not moved it and don't have any issues. I think HCL is pretty buggy (as has been stated above).
thesal523 said:
3- How to access tgps launcher and manage apps, clearing data and cache for
HCL...
Click to expand...
Click to collapse
Use NT Hidden settings (look in dev forum) to manage applications. Select HCL from the application list and clear data/cache.
thesal523 said:
4- Should the HCL be uninstalled after performing the above followed by the
ADW Launcher EX install?...
Click to expand...
Click to collapse
You don't have to, but you can if you want to.
thesal523 said:
5- Can I download(install) the ADW Launcher EX from the Android market?...
Click to expand...
Click to collapse
Yes. EX is the paid version (well worth it IMO). There is a free version, but it hasn't been updated in a LONG time (in internet time).
thesal523 said:
6. Once the ADW Launcher EX is installed how do I flip-flop between B&N
& ADW launcher?...
Click to expand...
Click to collapse
Again, you're going to need the stock SystemUI.apk
thesal523 said:
I read somewhere that to get rid of Honeycomb Launcher u can go to the Android Market > My Apps and click on HCL Launcher and then Uninstall...
Click to expand...
Click to collapse
Yes, you can do that.
Hit the THANKS button for those that have helped you [there are a few here] and to be honest, you're making this whole thing way more complicated than it needs to be. You really should learn how to use the XDA Forum SEARCH function more effectively so that you get better results for what it is that you're trying to do. As well, don't just hop on the first thing you find and try it without reading as much as possible about what it is that you're attempting to do. Also try to find corroborating information for that which you are attempting before attempting. Since you're new here, it can be a bit daunting but if you put a little effort into it, you'll find a lot of info and many people that will help you accordingly.
And Welcome to XDA Forums!
ckevinwelch - Many thanks for the quick & detailed response...
I've decided that I will unroot/re-root my NT & select ADW from the list of launchers...I will also pay closer attention to the question regarding SystemUI.apk at the end of the rooting process...If I understood u correctly, my response should enable the install of the SystemUI.apk, correct?...
After rebooting I should be able to switch between launchers(B&N - ADW) since the SystemUI.apk would have been installed, correct?...(I'm assuming this is done by double-clicking the "n" button)...
I'll also head over to the DEV Forum to read about accessing NT's hidden settings in order to access tgps launcher and manage apps, clearing data and cache, etc...
I'll post back here with the results...Thank you very much for your time and all the help...
thesal523 said:
ckevinwelch - Many thanks for the quick & detailed response...
I've decided that I will unroot/re-root my NT & select ADW from the list of launchers...I will also pay closer attention to the question regarding SystemUI.apk at the end of the rooting process...If I understood u correctly, my response should enable the install of the SystemUI.apk, correct?...
After rebooting I should be able to switch between launchers(B&N - ADW) since the SystemUI.apk would have been installed, correct?...(I'm assuming this is done by double-clicking the "n" button)...
I'll also head over to the DEV Forum to read about accessing NT's hidden settings in order to access tgps launcher and manage apps, clearing data and cache, etc...
I'll post back here with the results...Thank you very much for your time and all the help...
Click to expand...
Click to collapse
If you want to keep the stock behavior (i.e. the little popup menu that would allow you to access the stock home), DO NOT let N&Z install a new SystemUI.apk. You want the stock one.
sounds like you are on barnes and noble home screen and cant change back. you can install anycut to access menu again to force change between launcher, or download a new launcher from the internet and this will force the choice again... or download the hijack adb app and use it to patch with nook zergy to install a new launcher... or download my sd card image file and it has all the apps there to install from... got videos on many of these things on my you tube channel... however, if you have removed the N menu and set barnes and noble home screen to your default launcher, you may not have access to a method to install another launcher except to manualy push it over using ADB and a usb cable. If you ar at this point and not comfortable with command prompts, then I would just do 8 factory restore and start over with the SD card I made... I even made a video of how to recover a failed root process with the sd card. it has all the files you need so you dont have to go all over looking for them.
Sent from my Transformer TF101 using xda premium
Thank you albertwertz for the feedback...I decided to unroot/re-root and followed ckevinwelch' suggestion, i.e., did *NOT* let N&Z install a new SystemUI.apk. & keep the stock behavior...After rebooting my NT & selecting HomeCatcher & ADW launcher as default I can now bring up B&N's stock menu...I also got the weather widget to work properly(failing when running with HoneyComb launcher)...I really appreciate the time+patience you've put into helping me along...
I've also launched tgps_launcher to familiarize myself with the settings...One thing I noticed is that Auto Mount is flagged under Development, should it be(I recall I had to un-check it during the rooting process)?...
I did some navigating to familiarize myself with the settings, options,etc.,..
I also downloaded/installed/opened a game(Solitaire) to gauge the size of mem/storage utilized...I went back to tgps_launcher to get a list of the running Apps...I noticed that the Solitaire game was listed under the "On SD card" tab, however I didn't have an SD card installed at the time(box to the right was unchecked)?????????...
I stopped Solitaire, went back to my list of Apps & noticed that the Solitaire icon switched to the android icon...I tried opening it, but got some sort of error stating that it couldn't be opened so I ended up un-installing/re-installing...How do I determine if an Apps. is closed(not running) and what's the correct way to stop it and re-claim used memory/storage?...How do I move stuff around between data <-> system files?...
Again, many thanks(trying to get all my questions in as I learn more about this conversion)...
Hello all,
i can't unlock Launcher Pro to Plus version. I bought Plus version unlocker in market, but app still locked (also after restart, reboot). Has anyone had the same problem? Thank you.
F.
You probably have some other problem that's showing up with these symptoms.
I use L-Pro on stock 173, and I've used it on the ICS leak (where adding widgets becomes difficult due to no text beside the widget icons).
L-Pro is what I typically use, regardless of the image I'm using.
Did you use TiBU to "freeze" things on your phone? Try thawing those out, one by one, and see if the problem goes away. That's the usual source of "random" problems...
This is because i've pushed launcher pro to install as a system app. Don't use the unlocking program request a key, that it's if the developer still contactable.
Other option, install another launcher, then move lpp to /data reboot and it will function correctly.
Sent from my XT910 using XDA
Thank you FTS, worked
Moved home.apk from system/app to data/app, then uninstall in market, install again from market and unlocker working now.
I rooted my wife's nook a year ago and she has been using it daily with the GO Launcher, if I remember correctly. A couple days ago she backed out of something and ended up on the B&N stock launcher. The N button does nothing, I can't access any of the apps unless a notification pops up about the app, I can then open that app by clicking on the notification, otherwise I have no access to apps or settings.
I would like to safely wipe and revert the nook back to factory settings then re root from that point. I don't need to save any data, just get back to factory nook.
How do I do this?
Thank you.
If indeed it is all right to completly wipe it, use the "repart.img". It will get you back to 1.4.0, You can then put 1.4.3 back before you root if you want to run stock. Google to find the image and instructions. It's fully automatic, but you need to know that when the green check mark appears it's safe to take out the sd-card ad reboot.
I think there is a key press combination you can try first if you prefer that. "Think" being the operative word here... It could be something like power, volume up and "n" at the same time while booting... Could be... Give it a go!
Edit: I just thought of something even simpler. if you're not on 1.4.3... Maybe... Try just downloading the firmware update from BN and drop it in the root and then maybe it will update itself and by doing so also break root. If you're already on 1.4.3 it won't work, and maybe not at all, but I would at least give it a go!
Thank you for the reply. I will search that first option you mentioned.
My goal is not to end up with the B&N launcher, just to start from scratch and go from there. I am not up to date with what people are doing with the Nook, but I want as close to an Android experience from it as I can get.
Sent from my SAMSUNG-SGH-I747 using xda premium
I have found a good work around for those of you who may enjoy more usable space on your screen. With the screen the S4 comes with it only makes sense to use it. Only follow these steps after you are running on Hyperdrive ROM successfully (I am guessing this will work with other roms as long as Xposed Framework can be installed).
Background Work (no major changes yet)
1) Open the app Hyperdrive Control
2) Navigate Custom Settings > Advanced Mods > Framework Installer
3) Click Install/Update
4) Select the tab 'modules' from the top
5) Check all the boxes you see (I had 3)
4) Click Reboot
Let's get started
1) Reopen Hyperdrive Control
2) Navigate Custom Settings > Advanced Mods > Per App DPI Settings
3) Select Google Keyboard
4) Turn the switch to ON
5) Enter 160 for DPI, 100 for Font and check the box labeled 'xlarge res'
6) Click save and click yes.
7) Repeat steps 4-6 with the apps Swype and Samsung Keyboard
8) Make sure you followed the above steps then continue
9) Now find an app called Android System from the list and select it.
10) Enter 280 and don't change anything else (I don't know what you would be doing so I stayed away)
11) Click save and click NO.
12) Restart and enjoy.
I went back and changed System UI to 340 as I didn't like how small the notification bar became. Also recommending ExDialer as the stock keypad won't 'stretch' and lastly as a must, look into a good launcher. I am using NOVA Prime.
If you want to undo changes you can simply turn everything 'Off' and click Save and No. Then restart.
Hopefully this helps some!
If I am missing anything or if anyone wants to add more detail let me know! Side note: random but AOSP helper was installed on my device also allowing easy toggle from 3G to 4G with JuiceDefender...
Colton
Mods can you list this as a [HOWTO]... sorry left that out.
awesome.. .thank you!
OMG thank you for this, i has given up on how to do anything on it. I did not know how to use Xposed frameworks, this is what i needed, than you very much:good:
Has anyone tried changing the overall system DPI and then changing just the misbehaving Samsung applications back to stock (i.e., Contacts/Dialer, Camera)? I pretty much manually set all of my apps to between 320 and 340, but the Notification dropdown is way too big. (Email and Gmail both at 320 in order to become usable).
This made my launcher grid super tiny and the keyboard is unusable it is so small. I can imagine how some slight DPI adjustment could be good, but this is aweful!
that being said, I will use this method to adjust things how I would like them.
I'm glad it worked well for you guys but both of those changes made things worse for me. I put it back on stock and am very happy with it.
I'm running 320 DPI in my build prop. To fix the dialer I went into the per app DPI and changed the contacts app and phone app to stock 480 DPI and also the calculator app as well. They all run just like stock now no problems at all
Forgot to mention gallery as well
Sent from my SCH-I545 using xda premium
im using 360 in my build.prop. and have had no problems. only thing i had to fix was my market. which i used this market found here
http://forum.xda-developers.com/showthread.php?t=1839871
using the correct version of the one in my current rom(hyperdrive). Dont ask me why this works. But someone else said they tried it and it worked. so i did and it worked. Sometimes ive noticed it will all the sudden on reboot, change to a different version of the market. But that has only happened a couple of times. and usually it didnt matter(most apps still showed up like normal). But i dont know that this will work the same way for everyone since it seems to be a semi flakey method.
It works fine in HyperDrive RLS 4. Don't try to change the build.prop for the first boot, though. Let it boot once, then change it. Let's just say that the results were a hung device first.
I added clock back to 480 because there are issues with it.. The year view in Calendar is a bit off, but that's the only screen that doesn't work right... The Market works fine at this resolution (360). This is much easier than what I was doing before...
Now Touchwiz can be somewhat usable as it isn't huge gigantic text everywhere (even on the Tiny selection in Screen)
My system ui keeps crashing whenever I change anything related to Android System. Followed the directions but no luck so far.
kcellb said:
My system ui keeps crashing whenever I change anything related to Android System. Followed the directions but no luck so far.
Click to expand...
Click to collapse
That's why I just went the other way around and changed build.prop then made things larger as needed. Less problems this way...
jeffreycentex said:
That's why I just went the other way around and changed build.prop then made things larger as needed. Less problems this way...
Click to expand...
Click to collapse
I will be the first to admit that I am not an expert at this in anyway. This is just how I got it to work...
You said Hyperdrive Build 4 is working for you? I flashed it and have had nothing but troubles so far. It always hangs at SAMSUNG Custom boot screen... I have tried everything and now once I went back to my Nandroid of 3.1 it boots up with no issue, Then I go to reboot through the power menu and it hangs on that screen again.
Colton
PS I guess an easier approach also to allow most programs to stay stock would be to allow the android system to stay stock and just change what you need like the launcher...
I had the same problem about system ui... make sure you are pressing NO to the option it gives you and then reboot. I also had some DPIs that the phone just didn't like (240)... everything kept fc'ing...
colton22 said:
I will be the first to admit that I am not an expert at this in anyway. This is just how I got it to work...
You said Hyperdrive Build 4 is working for you? I flashed it and have had nothing but troubles so far. It always hangs at SAMSUNG Custom boot screen... I have tried everything and now once I went back to my Nandroid of 3.1 it boots up with no issue, Then I go to reboot through the power menu and it hangs on that screen again.
Colton
PS I guess an easier approach also to allow most programs to stay stock would be to allow the android system to stay stock and just change what you need like the launcher...
I had the same problem about system ui... make sure you are pressing NO to the option it gives you and then reboot. I also had some DPIs that the phone just didn't like (240)... everything kept fc'ing...
Click to expand...
Click to collapse
I had problems with the first two downloads. Then I was able to get one to work early this morning... Also note that it is supposed to be a wipe'd flash, so make sure you do the format data/cache 3 times, then format system... I generally do a flash of the rom first to make sure that there aren't problems, though, before I format system...
I only use 320, 360, and 480's as DPI's on the S4.
Your approach is the way I used to do, but I wanted everything smaller, so every time I installed a program, I changed it to 320/360.. But then I wanted 320/360 to be the overall and only make exceptions for the things that demand stock DPI.
Understood - I didnt wipe to flash as i never did before without an issue. I am downloading stock ODIN now as something is up with my data partition...? It hangs on every second+ boot from restore/install and will not even boot off an install. I will go to stock odin, root, recovery and then install. Also downloading a fresh copy of Hyperdrive RLS4... Thank you for the tips.
C22
Found a better way!
Okay so I am now on RLS 10.2.0...
Download some type of Root file manager... I paid for/use Root Explorer love it.
Navigate to /system and long press build.prop
Find the line that contains screen density =480 and change it to your desired DPI (I am using 280)
From there all apps/everything is changed to that dpi... some stock apps you will have to use xposed to change them back to 480 just to make it work because they show different resolutions horribly.
I followed these steps...
http://forum.xda-developers.com/showthread.php?t=2269483
works great! Enjoy.. Also on the Multi DPI stock app post, the only one that works with the Verizion phone is the Gallery S4 v2.zip file... The others I am trying to work with the dev on getting up and running for our phones.
Colton22
deleted
Thanks