Good morning everyone. In advance I would like to thank everyone for their assistance.
Working with:
Galaxy Player 4.0 (YP-G1)
Firmware 2.3.5
Rooted - after the problem started, to allow access to system files.
Stock ROM
All apps up to date. No new apps installed between AM and PM commute (problem started during PM commute from work).
Problem affects built-in speaker and headphone output.
After a lot of testing, the problem is actually isolated to just one of the speakers/earphones (on the player it is the bottom one, in normal portrait mode and the right earphone, so I'm calling the right audio). If I cover the right speaker and turn up the volume the left speaker sounds normal.
So I've decided that the right side audio is over amplified or modulated, even at low volume it sounds like it is turned up to 11.
Here is the long version, if you want all the gory details - I figure more info is better. Right?
I mostly use my GP4 to listen to podcasts during my commute and it has been working great since I've had it (about 4 months), but 2 days ago that all changed. On my way home I fired up Pocket Casts to continue listening to a podcast (EscapePod) and it sounded like crap. By crap I mean very distorted and loud - even at low volume - like a cheap stereo cranked all the way up. At first I thought maybe it was a problem with the podcast, that was not the case, they all had the problem. OK, so is it Pocket Casts... Nope, every audio app (stock music player and ones from the market - installed WinAmp, PowerAmp, others to test) has the same problem. Alarm sounds have the problem. Reboot... Problem persists.
More diagnosing - one app/component does not seem to suffer from the problem, the FM radio. I also seems to have it's own volume - FM Volume.
I found this post in the forums - - but apparently the srs_processing.cfg file is not on this device. I assume it is because Samsung uses their own SoundAlive processor.
I have tried various audio control apps, but none seem to allow control of the balance. I tried PowerAmp media player which does have a balance control, but its balance control has no effect.
Again, thanks in advance for any help.
Arklazak
Sounds to me like an actual hardware issue. The 1/8" headphone jack and the main speakers are hard linked together. This can happen when a bad/physically distorted 1/8 male jack is inserted or a good one is awkwardly removed/inserted or hit while in place. Essentially the impedance value for your affected channel is disrupted from that particular contact inside being bent or contacting another component inside the device. This happens on PA sound boards often.
Assume you're not under warranty still? I'd call samsung and see what they are willing to do for you. More than likely they will fix it regardless of warranty state - they are good like that, or replace it if you are under warranty. You will need to return to stock unrooted though.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
annoyingduck said:
Sounds to me like an actual hardware issue. The 1/8" headphone jack and the main speakers are hard linked together. This can happen when a bad/physically distorted 1/8 male jack is inserted or a good one is awkwardly removed/inserted or hit while in place. Essentially the impedance value for your affected channel is disrupted from that particular contact inside being bent or contacting another component inside the device. This happens on PA sound boards often.
Assume you're not under warranty still? I'd call samsung and see what they are willing to do for you. More than likely they will fix it regardless of warranty state - they are good like that, or replace it if you are under warranty. You will need to return to stock unrooted though.
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
Click to expand...
Click to collapse
annoyingduck, You rock!!
I have had a headphones in and out many times during testing and nothing had ever changed. After reading your comment I plugged in some headphones, gave a gentle yet firm little jiggle of the plug and voila everything is back to normal!
I plug the GP4 into an aux in port in the car, so when it must of gotten a little tweaked when I unplugged it earlier in the day.
My thanks to you again, annoyingduck. Iwas driving me crazy having to listen to commercial radio - LOL
73s, Cheers,
Arklazak
Nice, glad it worked out. Just be careful wiggling that jack, it eventually will losen to an unusable point. Also, try to use true 1/8 connectors, the metric variants which are advertised as being fully compatible are actually slight undersized and can cause a bad connection (Samsung's actual headphones are not true 1/8 jacks!?!).
All quality brand name cables have true 1/8 ends (monster, Dayton, proco, etc)
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
annoyingduck said:
Nice, glad it worked out. Just be careful wiggling that jack, it eventually will losen to an unusable point. Also, try to use true 1/8 connectors, the metric variants which are advertised as being fully compatible are actually slight undersized and can cause a bad connection (Samsung's actual headphones are not true 1/8 jacks!?!).
All quality brand name cables have true 1/8 ends (monster, Dayton, proco, etc)
Sent from my VZW GS3 running Synergy/Trinity/Dark Horse Rises
Click to expand...
Click to collapse
I will heed your advice. The cable I currently use is a little short, so I am going to buy a good quality and longer one.
Thanks again.
73s, Cheers,
Arklazak
Resolved...
I contacted Samsung support and they had me go thru the normal scripted troubleshooting (reset to Factory Defaults and see if the problem persists - it did of course - thank goodness for root and Titanium Backup :good: ). Any way, it was still under warranty so I was able to send the SGP 4.0 in for repair. The turnaround was quick (about a week, including shipping) and service/shipping was free.
FYI - Parts replaced:
GM59-01038A - Module-Speaker Upper
GM82-01007A - A/S Assy-PBA Main
Thanks for the help.
73s
Arklazak
Related
Hi all,
to my great frustration, I've discovered that my SGS2 line-out / headphones jack seems to have a slack joint, i.e. if you turn a connected plug around its long axis, a crackling sound is heared in the speakers and at some angular positions the stereo signal will be reduced to mono (i.e. one speaker gos silent). With one device (mobile outdoor speaker) I even had no sound at all at when inserting the plug with the wrong "orientation".
Did anybody experience the same problem or am I just out of luck here?
I am wondering whether sending back the device to the retailer (Amazon) or directly to Samsung (I'm situated in Germany) will yield the faster round-trip time, any experiences here?
Thanks!
PS: I know this may be a stupid question but can somebody PLEASE tell me how to search for multiple keywords with AND logic in this forum? Tried "+word +word" and "word AND word" (without the quotes) but nothing seems to work.
Are you using the headphones that came with it? My better half went through 4 sets of the stock samsung headphones with her original Galaxy S and all produced the same issue of losing one channel after a matter of days/weeks. having the jack inserted to about 2/3rds is a workaround but not ideal as you still lose some frequencies and it's insecure... They're just a bit pony.
No, I used different kind of headphones, including Sennheiser in-ear headphones and a standard male-male audio jack connected to some bigger hifi system. With some jacks I did not encounter the problem, but most of them lost some part of the signal with some orientations: I persume that the manufacturing tolerance of the jacks also plays a role...
Anyway, it's definitely not a problem of the jacks but of the device since I tried it with the SGS2 of a friend yesterday and it worked with the same jack that made problems with my device.
I will proceed sending my phone to Samsung for repair, I hope that won't take to long *sad looking*, I am so used to it now, it's card to survive to weeks without it.
I had the same problem, all I had to do was insert headphones cable "HARDER" into the audio jack until I herd a "click" sound.
I was way to over protective of this phone when i first had it, and wanted to handle too much with care, forced the dam cable in, and "click", sounded like it snapped into place, the audio worked correctly without cracking noise or without the need to wiggle to cable get clearer sound.
Perhaps your friends SGS2 is already used to headphone being inserted, but yours not. Just add a little pressure until you hear clip into place.
If this doesnt help, then repair or return.
Thanks for the hint, but unfortunately I had the jack inserted to the very end, so this was not the problem... sent in for repair now, let's see what happens.
I have a fix for you i think!!!!!!!!
ok . when i got my s2 like 4 days ago (at&t usa version) i noticed that when i plugged into my aux cable in my car that it was low sound cracking more volume on the left side , very annoying . NOW FOR A SIMPLE FIX FOR SOME TO TRY! PLUG IT IN ALL THE WAY! i noticed when plugging it in i wasnt fully plugging it in . it should go all the way down FULLY! the sound is perfect once this is done . I HOPE THIS HELPS YOU !!!!!! good luck
I plugged my headphones in for the first time today and i realized that the left side was quieter than the right. And I unplugged it and replugged it in and it was fine. Then I tried it again and the left side was lower again. I'm not sure what's causing this or if my tablet is defective. But it seems like a hit or miss on getting even volume from both sides.
Anyone else having this problem or can test it out?
I have te same issue and it happens every time I plug in headphones and its annoying.
For me this only happened when I use my SGS2 headphones on Nook.
Actually, I found that SGS2 headphones only work well on the SGS2. With my laptop they have tons of noise, on nook sometimes I have uneven volume.
Although on SGS2 they have the best sound I've ever heard in headphones..
Have you guys tried other headphones?
I only have the one pair of head phones and they are a generic brand from dollar general and they dont have any issues when i use them with either my pc or psp or phone for that matter
Montisaquadeis said:
I only have the one pair of head phones and they are a generic brand from dollar general and they dont have any issues when i use them with either my pc or psp or phone for that matter
Click to expand...
Click to collapse
My 5$ noise isolation headphones work just fine? O_O
Montisaquadeis said:
I have te same issue and it happens every time I plug in headphones and its annoying.
Click to expand...
Click to collapse
This.
Every single time.
no issues here.
No issues here.
Headphone bug
Yes I too have that problem. Glad to see that it's not just me & mine.
Stupid question - for those having issues, have you tried wiggling or rotating the plug once it is plugged in? Sometimes I find if I have a spot of oxidization on the plug it will cause said uneven volume. It could explain the difference that occurs when you unplug/plug back in.
Another thing to try would be to plug them in when the device is asleep to see if that helps. If there is anything that tries to reduce the "pop" of the sound of plugging in the headphones it *might* affect how they sound after the fact.
Just grasping at straws here based on my experience with other devices.
I was having this problem until I realized I only had my headphones plugged in half way. Don't mean to be a jerk, but have you tried plugging your headphones in just a little further?
Sent from my DROID BIONIC using Tapatalk
no amount of fiddling with the plug helped me at all still have the issue and its annoying since the speaker isnt loud enough when I am out and about.
Another thing to consider - another issue I've had with certain device/headphone combos is that some headphone jacks either don't have a long enough plug or the plastic jacket of the jack interferes just enough with the plug in the device to affect sound (essentially related to downsay's comment). Try a cheap pair of 'phones from the dollar store with a simple jack and see if the problem persists. If so, perhaps the device is defective...
These are a cheap pair of head phones from dollar general lol.
Edit: Plugging the headphones in while the device was asleep seems to have fixed the issue for me for now. Sound is equal in both cans now
I have tried 4 different earphones, they have been plugged in all the way. Some people have no problem, so I'm beginning to think this is a hardware defect. I'm going to exchange mine and will let you guys know if there is a difference. I'll also try out the display model and see if it suffers from this problem.
Glad to hear you got them to work. Please do let us know how it goes with returning the nook tablet.
Sent from my DROID BIONIC using Tapatalk
I replaced my Nook twice partially due to this issue. Same problem on all three and it's always the left channel that is not connecting properly. I have found that I can get a good connection by plugging the jack in slowly. I think this is more a software issue than a hardware issue.
Yea just exchanged my tablet as well and the same issue is there as well as the one at the store. Plugging in slowly does help. Just before it engages the last click, if you hear both channels you're golden. Hopefully this is a software issue because it seems to be random. Unfortunately the one I exchanged has a creaking case, so now back to exchange again.
I stopped by Radio Shack this afternoon and purchased a $5 female to male 1/4" stereo connector. It seems to have solved the problem. I had similar problem years back with an iPaq PocketPC. Due to the shape of the hole on the iPaq/Nook, the headphone/earphone connector isn't inserting deeply enough.
Another solution would be to use something like a Dremel Mototool and shave away some of the excess material on the headphone/earphone adapter, so it can insert a little bit deeper.
ibgap said:
I think this is more a software issue than a hardware issue.
Click to expand...
Click to collapse
What is everyone testing their audio on? The stock media player? Video (what program)? Is it on every application you try?
I haven't had any issues with audio in games, websites or MX player at all other than a loudish pop when some programs start up, but I'm using a set of Denon stereo headphones (so, good (large/long, gold) headphone plugs on it, jiggling the connection does nothing).
So I installed Neutrino on my Atrix yesterday (I'm not sure if that's relevant or not, but I figure it's good to know), and everything was working perfectly fine. However, earlier today the audio from my headphone jack started to sound completely distorted.
It's not the earbuds, because they work on other devices I have. And the audio from my speakers and from HDMI works perfectly fine.
Has anyone had this problem, and if so, is there any way I can fix it? Or is my phone screwed?
Did you play with equalizer settings any (DSPmanager or similar)?
I didn't. At least, not at first.
DSP Manager actually started to crash on startup about the same time that the audio from my headphones would be a problem. I thought reinstalling it would fix the problem, but it hasn't. Though, the louder I make it, the more "clearly" I can hear what I'm playing (it still sounds like satan farts, though).
I also tried cleaning the headphone jack, but that only helped a slight bit.
Would it be worth reinstalling Neutrino or is my phone died?
I'd say it's worth a shot. Make a nandroid, do a full wipe, and then flash your ROM. If that doesn't help, then at least you can be fairly sure it's not the software.
So I'm bumping this, with a little bit more information of what I've tried and what my problem is.
I've tried uninstalling and reinstalling DSPManager. Didn't work.
I made a Nandroid backup, did a full wipe, and tried to play music again. Didn't work.
I actually tried to install Beats Audio Drivers to see if they would help. They didn't.
This is what my phone's audio jack currently sounds like, without the high-pitched humming so pardon me if your ears hurt.
http://soundcloud.com/user587656353/i-want-you-back-almost-kinda
I actually tried cleaning the inside of my headphone jack and it seemed to help ever so slightly.
Would this mean my headphone jack is toast or does anyone else have any ideas what the problem could be?
hellothar said:
So I'm bumping this, with a little bit more information of what I've tried and what my problem is.
I've tried uninstalling and reinstalling DSPManager. Didn't work.
I made a Nandroid backup, did a full wipe, and tried to play music again. Didn't work.
I actually tried to install Beats Audio Drivers to see if they would help. They didn't.
This is what my phone's audio jack currently sounds like, without the high-pitched humming so pardon me if your ears hurt.
http://soundcloud.com/user587656353/i-want-you-back-almost-kinda
I actually tried cleaning the inside of my headphone jack and it seemed to help ever so slightly.
Would this mean my headphone jack is toast or does anyone else have any ideas what the problem could be?
Click to expand...
Click to collapse
I'm not sure, but it sounds like what you're hearing is the difference between the 2 channels, rather than the channels themselves. This would happen if the common ground connection is broken somewhere in the audio out. It's an easy theory to test really. All you need is an audio file that plays on either the left or right channel only. If you have sound out of both channels, then there's your problem, if not, then it's something else.
Actually, this sounds like a poor connection that is overcompensated by extreme loudness so that some of the electric current is strong enough to pass through. I've heard what the "no common ground" sounds like many times, I don't think this is it.
The headphone connector is not actually soldered to the PCB but instead sits on it on springy contacts (makes for very easy repairs and replacements at service centers). I'm almost willing to bet there lies your problem.
ravilov said:
Actually, this sounds like a poor connection that is overcompensated by extreme loudness so that some of the electric current is strong enough to pass through. I've heard what the "no common ground" sounds like many times, I don't think this is it.
The headphone connector is not actually soldered to the PCB but instead sits on it on springy contacts (makes for very easy repairs and replacements at service centers). I'm almost willing to bet there lies your problem.
Click to expand...
Click to collapse
Maybe. But if that is the case, wiggling the plug may give some indication of that without disassembling the device, just as would playing a single channel file. In both cases, the jack would likely be the culprit, but given how fragile the device is internally, taking it apart should be done with extreme caution.
lehjr said:
Maybe. But if that is the case, wiggling the plug may give some indication of that without disassembling the device, just as would playing a single channel file.
Click to expand...
Click to collapse
True. I wouldn't recommend digging into disassembling the phone right away, not before exploring other possibilities. Because...
lehjr said:
given how fragile the device is internally, taking it apart should be done with extreme caution.
Click to expand...
Click to collapse
...this.
I tried playing a mono sound file, and sound files that play through only the left speaker and only the right speaker. They all sound like they have the same problem, so we can rule that out.
Though, I will mention that the sound that is heard is on maximum volume, and that's the only time I can hear anything at all. If I go down just two notches, then I start to hear nothing.
hellothar said:
I tried playing a mono sound file, and sound files that play through only the left speaker and only the right speaker. They all sound like they have the same problem, so we can rule that out.
Though, I will mention that the sound that is heard is on maximum volume, and that's the only time I can hear anything at all. If I go down just two notches, then I start to hear nothing.
Click to expand...
Click to collapse
Just a thought, but have you tried another pair of headphones?
Edit: if the headphones are good, then the only other thing I can think of is a bad section in the audio chip. The schematic shows the headphone output is separate from any of the other sound outputs, so it is possible that the chip is bad. Unfortunately, if that is the case, the cheapest solution would be to replace the main board, but it's a delicate procedure.
Edit 2:
Before giving up, this thread might help.
lehjr said:
Just a thought, but have you tried another pair of headphones?
Edit: if the headphones are good, then the only other thing I can think of is a bad section in the audio chip. The schematic shows the headphone output is separate from any of the other sound outputs, so it is possible that the chip is bad. Unfortunately, if that is the case, the cheapest solution would be to replace the main board, but it's a delicate procedure.
Edit 2:
Before giving up, this thread might help.
Click to expand...
Click to collapse
Yeah, I'm sure it's not the headphones. I've got two; a set of headphones and a set of ear buds. Both of them are functional in other devices but do not work in the phone. Also, the audio clip was direct feed with a different chord, so the problem is surely with the phone.
I'm at the point where I'm willing to open up the phone to see if there is a problem with the jack itself. If it is corrosion or another problem with the jack then I can try some repairs. If I do have to replace the main board then I'll probably wait on that and ultimately purchase a new phone.
One thing to note is that the audio quality does not improve if I move the jacks around inside of it. However, I do hear a sort of rubbing sound from the headphones if I am moving it around.
hellothar said:
Yeah, I'm sure it's not the headphones. I've got two; a set of headphones and a set of ear buds. Both of them are functional in other devices but do not work in the phone. Also, the audio clip was direct feed with a different chord, so the problem is surely with the phone.
I'm at the point where I'm willing to open up the phone to see if there is a problem with the jack itself. If it is corrosion or another problem with the jack then I can try some repairs. If I do have to replace the main board then I'll probably wait on that and ultimately purchase a new phone.
One thing to note is that the audio quality does not improve if I move the jacks around inside of it. However, I do hear a sort of rubbing sound from the headphones if I am moving it around.
Click to expand...
Click to collapse
If the jack is the issue then it shouldn't be too bad to replace. I was looking at different websites earlier and they look to be really cheap. The thing I have to stress though is just be careful, and don't take apart the phone unless you can replace the phone itself just in case something should go horribly wrong. I know that should be pretty obvious, and generally people tend to underestimate their own skill level, but I have encountered a few people in my time who have what I consider to be the opposite of the Midas touch, and their attempts at repairing anything end up as more of a hate crime against the very thing they are trying to fix.
EDIT: Moderators, please feel free to move this thread to the troubleshooting/Q&A forum. I didn't realize it might belong there... Sorry!
OK so I got a new HTC One and so far I love it in all aspects except... the following:
With a headset plugged in to the headphone jack (earbuds with in-line mic and button) any amount of jostling or rotation of the plug in the jack causes my phone to skip songs, stop playing music, and begin redialing the last call in my call log. This issue makes the phone practically unusable for listening to music, as even the slightest shaking of the plug (i.e. from phone in pocket while walking, movement of headphone cord from turning head left or right while sitting still, etc) causes problems.
I thought it was a problem with the individual device I got so T-Mobile was nice enough to send me a new HTC One...
And it has the exact same problem.
I have tried several different headsets with button and mic. Notably, all of the headsets with mic I've tried all work flawlessly on all other devices.
Has ANYONE had this problem?
Note that I Intend to record a video of the problem for evidence, but I'm pretty convinced its a design flaw in the HTC One.
At this point I have all intention to go with a different device, as much as that pains me to say (probably the Xperia Z)
EDIT2: After some experimentation, I have discovered the problem. It is a ridiculous design flaw on the part of HTC. I will post pictures later along with videos. In theory it can be remedied with a new set of headphones of a certain style or possibly some electrical tape or other insulating material, but I really don't think that should be a requirement of using the HTC One.
EDIT4: See here for my post on reddit with a description of what I believe to be the cause of this problem: http://www.reddit.com/r/htcone/comments/1k6ia1/illustration_of_a_design_flaw_with_the_htc_one/
And here is a link directly to the photo album on imgur with descriptive captions: http://imgur.com/a/uXvn3
i just picked up a set of ear bud n mic headphones today and played music and did voice commands with it today and had no issues but it was a short period of time...i will try to replicate ur issue and report back later today.
its a issue with something of htc software i believe. it was doing similar with my skullcandy ink'd second gens.
i looked into it a lil but not alot. but it seems only certain headset/earbud combos work properly. i really dont know why theyd have it like that. but for me i had to play around with the mic button and what not.
It's the head set I have earbuds and soul, soul works fine
Sent from my HTC One using Tapatalk 2
I've run into this problem on other phones before, but it was always the 3.5mm jack. Either it was tarnished or the case/jack design combo was causing it to not seat fully. Check very closely that the jack is fully seated and maybe try with another set before condemning the jack in the phone as bad.
I believe I have diagnosed the cause of this and other problems. Please see the OP for links to photo album with descriptions.
I purchased mine back in june and never had this problem. Ive used 2 pairs of headphones with the device (some $5 kyocera promo headset from when I worked at metropcs and a pair of Sony MDR-XB500). Only thing I could think of would be faulty software/hardware (phone jack) combination.
LifeEscalade said:
I purchased mine back in june and never had this problem.
Click to expand...
Click to collapse
yeah , it's right.
I have this very issue on my HTC one Since my wife's HTC one doesn't experience it with the same headphones I just concluded it was some tolerances that were off on mine I mainly use Bluetooth so I didn't feel it was a big enough issue to return. I had originally searched to see if it was a widespread issue, but could not find any others who had it.
I have not had the problem, either with a headset or an AUX cable I use for my car stereo. The headset jack on mine fits very snug and the plug does not touch the housing except maybe a very small area where the lip is metal.
Just wanted to know if anyone else noticed faint buzzing/scratching/hissing noises coming out of their headphone jack...
(and yes I have tested several headphones/earbuds and tested with my MDRv6's all with the same results. Its definitely the phone not the headphones)
When I insert my headphones there is a quick beeping sound that plays for a second or so then goes quiet.
When music is playing, especially soft music (a particular song was Instant Crush; Daft Punk) there is a hiss in the background, specifically when certain tones play.
It was terribly noticeable right at the beginning of a few songs, especially the one I listed above.
I also have button sound effects enabled. So When I press one of the soft UI buttons it makes a tick noise. However for about 5 seconds after the tick there is a long hiss then silence until I press another button.
The volume of the hissing/scratching noises is directly related to the actual volume of the device and the note playing.
Im on stock build 11c w/root, and I havent found a lot of info about this problem.
Just wondering if anyone has noticed this, or if this is a known issue?
If your phone is warranteed, I would bring it in
The G3 boasts an AMPLIFIED 1 watt sound speaker, which means there is a powered sound processor.. Unless the jack needs to be cleaned, I would lean toward thinking there is a defect in your phones jack, or sound assembly. I think its more than likely a defective jack, especially if there are no sounds like you are describing when headphones are not in use
Yeah the phone is brand new. I think I'm going to RMA....
Sent from my VS985 4G using XDA Free mobile app
I've noticed it. Seems to be worse when charging.
Verizon remotely detected root, warranty voided.
Posted about it here.
http://forum.xda-developers.com/showthread.php?p=57355721
Word of warning before calling Verizon
Sent from my VS985 4G using XDA Free mobile app
nuke235 said:
Just wanted to know if anyone else noticed faint buzzing/scratching/hissing noises coming out of their headphone jack...
(and yes I have tested several headphones/earbuds and tested with my MDRv6's all with the same results. Its definitely the phone not the headphones)
When I insert my headphones there is a quick beeping sound that plays for a second or so then goes quiet.
When music is playing, especially soft music (a particular song was Instant Crush; Daft Punk) there is a hiss in the background, specifically when certain tones play.
It was terribly noticeable right at the beginning of a few songs, especially the one I listed above.
I also have button sound effects enabled. So When I press one of the soft UI buttons it makes a tick noise. However for about 5 seconds after the tick there is a long hiss then silence until I press another button.
The volume of the hissing/scratching noises is directly related to the actual volume of the device and the note playing.
Im on stock build 11c w/root, and I havent found a lot of info about this problem.
Just wondering if anyone has noticed this, or if this is a known issue?
Click to expand...
Click to collapse
Just got my G3 a week ago and didnt use headphones until I read your post, I tested many different songs with different players, stock player, google player, Iheart radio, pandora, etc, headphone sound is crystal clear on mine, I dont get any beeps either like you described, I did notice you need to make sure the jack is pushed in good and tight, I put it in and thought it was all the way in and sound was crappy, pushed a bit harder and it clicked in good and sound was great, do you have a case that may be preventing the jack from being pushed in all the way, I had a phone in the past that this happened to me with, had to cut away some rubber on the jack to make it fit snug, if none of those are the issue, I would look into a warranty claim. I am using the beats audio earbuds that came with my HTC M7 I had before this phone.
kchinth said:
I've noticed it. Seems to be worse when charging.
Click to expand...
Click to collapse
That could be the issue. I know on the 2012 Nexus 7, it's really bad. It's supposedly due to the microUSB port and the headphone jack sharing the same circuit, or some engineering thing like.
Wonder if it's the same or if they didn't shield the headphone jack very well and it's picking up interference from the microUSB port when charging?
I didn't want to leave this up in the air so I figured I would post an update.
I replaced my G3 through Verizon for a brand new unit. My first phone was of an earlier batch (came with the 10b update) the second one was of a later batch and had 11b pre-installed.
Both phones had the same issue. There is a hissing noise/distortion that comes from the headphone jack. Even when not playing music.
I noticed it on other phones too but not anywhere nearly as much. I understand that any audio source is going to have a little background interference but the G3 definitely has a more significant issue than others.
However it seems to be entirely dependant on what headphones you are using.
1st. I tested first with my Sony MDR-v6's which the problem is most noticeable on. Extreme hissing/background noise.
2nd. Then I used a pair of Audio Techina ATH-PRO500's and the problem was almost unnoticeable.
3rd. I also tried my Steel Series Siberia v2's and the problem was again almost completely gone.
4th. I also used my receiver at home. JVC 5.1 channel receiver with RCA speakers and a Kenwood sub, didn't notice the issue at all. However there where some occasional strange popping noises when no music was playing I didn't get on my GS3 or other MP3 player.
5th. Finally I tried the ear buds that came with my Galaxy S3 and the distortion was again totally noticeable with and without music playing.
This is most definitely an issue that totally depends on what headphones you are using not sure if it has to do with sensitivity or impedance (this is what most people think) however it is most definitely an issue. I saw a few threads saying that audio issues were a problem in Android 4.4.2 however LG/Verizon have yet to release a stock base on anything but.
I suppose I could flash AOSP 4.4.4 and see if the problem persists but I don't know if that would even be worth it.
2 phones and 4 headsets later this is starting to seem like either a software or a design issue.
However I have nothing but good to say about every other bit of this phone. Really besides the audio jack top notch all around.
Sent from my Stumped and Bumped Verizon LG G3
I might have found a workaround for this
I have tested 3 LG D855 and all of them have noise/static/high-freq leak from the processor out to the headphones. It might be a faulty design for the headphones amplification stage for headphones (when the headphones logo appears on the status bar). However, when using line level output (the jack appears on the status bar) the problem does not reproduce.
Therefore the workaround I've found is to trick the phone into line level output mode and then plug the headphones. To do this you need to plug in a 3.5mm jack extensor or a 2-to-1 3.5mm Y-adapter with no load, that's it, with nothing connected to it. At that moment, the phone will activate the line level output mode. Only after that you will connect the headphones, and you'll see there are no artifacts on the audio.
That being said, I'm not sure this will work with all kind of headphones as I have only tried with mines that are low-impedance ones, but on those it works perfectly. To be checked if the level of the signal in line mode is enough to drive other headphones.
In any case, it is a shame this happens with a high-end and expensive smartphone. I was hopping this will be fixed in a newer hardware revision but I got two replacements of mine and no luck. I have read somewhere this might be a flaw in Snapdragon 801, as it integrates completely the signal routings but isolates badly highfreq noise from processor stages, etc. etc. but I do not remember where I did read it unfortunately.
I hope this helps!
drondron said:
I have tested 3 LG D855 and all of them have noise/static/high-freq leak from the processor out to the headphones. It might be a faulty design for the headphones amplification stage for headphones (when the headphones logo appears on the status bar). However, when using line level output (the jack appears on the status bar) the problem does not reproduce.
Therefore the workaround I've found is to trick the phone into line level output mode and then plug the headphones. To do this you need to plug in a 3.5mm jack extensor or a 2-to-1 3.5mm Y-adapter with no load, that's it, with nothing connected to it. At that moment, the phone will activate the line level output mode. Only after that you will connect the headphones, and you'll see there are no artifacts on the audio.
That being said, I'm not sure this will work with all kind of headphones as I have only tried with mines that are low-impedance ones, but on those it works perfectly. To be checked if the level of the signal in line mode is enough to drive other headphones.
In any case, it is a shame this happens with a high-end and expensive smartphone. I was hopping this will be fixed in a newer hardware revision but I got two replacements of mine and no luck. I have read somewhere this might be a flaw in Snapdragon 801, as it integrates completely the signal routings but isolates badly highfreq noise from processor stages, etc. etc. but I do not remember where I did read it unfortunately.
I hope this helps!
Click to expand...
Click to collapse
Ive been having the same issue. I have a pair of Shure SE846 which are about 8ohms. I experience the poor audio, especially the noise in the left channel. I find that placing a call and then listening to music removes the left channel static but the sound is still kinda bad. Ill try your suggestion tonight and post back. Just wanted to let you know your not alone.
I despise my G3 because of this. Im looking to get a new phone unless I can fix this.
Nope, my sound is perfect on my high-end Sony over the ear phones. Crystal clear on pure stock G3 .
I haven't noticed any artifact issues on my phone when using headphones, however when I plug it into my vehicle and also plug in the charger that causes everything to go nuts. The USB interference causes a crazy amount of excess noise. I haven't ever actually tried listening to headphones while charging, so in the car is the only time I've ever noticed it. The same issue occurs when I plug in my Galaxy Tab Pro into the aux jack and charge it at the same time, so this is definitely not unique to the G3. I wish all phones had as good an amplifier as my HTC DNA does, I still use that thing for music because the sound is so good.
pitbull8265 said:
If your phone is warranteed, I would bring it in
The G3 boasts an AMPLIFIED 1 watt sound speaker, which means there is a powered sound processor.. Unless the jack needs to be cleaned, I would lean toward thinking there is a defect in your phones jack, or sound assembly. I think its more than likely a defective jack, especially if there are no sounds like you are describing when headphones are not in use
Click to expand...
Click to collapse
I'm having a different audio problem.
With headphones plugged in and listening to music using any player, the right side sound emits distortion/hissing noise at a certain frequencies. When I tested it with plugging a 3.5mm to 3.5mm to an external amp (JDS labs c5) the distortion/hissing noise is completely gone. So it's definitely not a faulty jack
The hissing is evident at the beginning of (first few seconds) Tina Area's Still Running and You set fire to my heart .
I'm testing it with sensitive iem (Westone Um3x).
So does this mean there is a problem with the internal amp of the g3 or more to do with the os bug that can be solved with a custom kernel or update.
Is this a common issue found on all g3s?
drondron said:
I have tested 3 LG D855 and all of them have noise/static/high-freq leak from the processor out to the headphones. It might be a faulty design for the headphones amplification stage for headphones (when the headphones logo appears on the status bar). However, when using line level output (the jack appears on the status bar) the problem does not reproduce.
Therefore the workaround I've found is to trick the phone into line level output mode and then plug the headphones. To do this you need to plug in a 3.5mm jack extensor or a 2-to-1 3.5mm Y-adapter with no load, that's it, with nothing connected to it. At that moment, the phone will activate the line level output mode. Only after that you will connect the headphones, and you'll see there are no artifacts on the audio.
That being said, I'm not sure this will work with all kind of headphones as I have only tried with mines that are low-impedance ones, but on those it works perfectly. To be checked if the level of the signal in line mode is enough to drive other headphones.
In any case, it is a shame this happens with a high-end and expensive smartphone. I was hopping this will be fixed in a newer hardware revision but I got two replacements of mine and no luck. I have read somewhere this might be a flaw in Snapdragon 801, as it integrates completely the signal routings but isolates badly highfreq noise from processor stages, etc. etc. but I do not remember where I did read it unfortunately.
I hope this helps!
Click to expand...
Click to collapse
Hi! This worked perfectly for me but for me instead of tricking the phone into line level output mode, I detaching one side of my headphones before plugging it into the headphone jack then reattached it afterwards. I'm using pair of sensitive iems (Westone um3x rc)
Everything is quit with no distortion, just how it should be!
One thing, is there an option within android or an app that can permanently enable line level mode ever time headphones are plugged in without having to trick it.
If so, I won't have to sent my phone for repair!
Also are there any disadvantages for using line level with headphones?
Fungus999 said:
Hi! This worked perfectly for me but for me instead of tricking the phone into line level output mode, I detaching one side of my headphones before plugging it into the headphone jack then reattached it afterwards. I'm using pair of sensitive iems (Westone um3x rc)
Everything is quit with no distortion, just how it should be!
One thing, is there an option within android or an app that can permanently enable line level mode ever time headphones are plugged in without having to trick it.
If so, I won't have to sent my phone for repair!
Also are there any disadvantages for using line level with headphones?
Click to expand...
Click to collapse
Using line out shouldn't make any difference on audio quality. It only disables the remote (buttons and microphone).
Would also really like a way to force the line-out mode. Btw, does this affect all G3s? Cause right now I'm not sure if it's worth the hassle of replacing it.
sulkie said:
Using line out shouldn't make any difference on audio quality. It only disables the remote (buttons and microphone).
Would also really like a way to force the line-out mode. Btw, does this affect all G3s? Cause right now I'm not sure if it's worth the hassle of replacing it.
Click to expand...
Click to collapse
I know but some how using line out causes the hissing from the right side to go away completely. Strange huh
Are you also having this problem?
I also don't want to return mine if it exists in all g3s and there's a easier work around.
Yea same thing. I have artifacts in the left channel except when I manage to force the phone to recognize the headphones as line-out. I did this with the adapter to test it and it's impractical if not impossible to use the same adapter all the time.
I'm gonna try doing this right this moment to see if it works: http://forum.xda-developers.com/lg-g3/help/hissing-noise-left-ear-playing-music-t2804065/page17
sulkie said:
Yea same thing. I have artifacts in the left channel except when I manage to force the phone to recognize the headphones as line-out. I did this with the adapter to test it and it's impractical if not impossible to use the same adapter all the time.
I'm gonna try doing this right this moment to see if it works: http://forum.xda-developers.com/lg-g3/help/hissing-noise-left-ear-playing-music-t2804065/page17
Click to expand...
Click to collapse
I don't use earphones with a volume remote or microphone so that's not a problem.
It could be more to do with the increase in output impedance but I might be wrong cos the volume level is identical to headphone out.
I'm also getting a lot of static background noise but it disappears after making and hanging up a call as mentioned in a thread.
But yeah a permanent fix by forcing it into line out or doing some changes in kernel would be much more convenient
Fungus999 said:
I don't use earphones with a volume remote or microphone so that's not a problem.
It could be more to do with the increase in output impedance but I might be wrong cos the volume level is identical to headphone out.
I'm also getting a lot of static background noise but it disappears after making and hanging up a call as mentioned in a thread.
But yeah a permanent fix by forcing it into line out or doing some changes in kernel would be much more convenient
Click to expand...
Click to collapse
Great news! I just tried the fix from that thread and it worked. Here's the post: http://forum.xda-developers.com/showpost.php?p=59601465&postcount=150
I'm using stock rom which had 3 mixer xml files and I edited 2 of them, mixer_paths.xml and mixer_paths_qcwcn.xml. Also, instead of changing the value to 0, I deleted the entire line as it was suggested later in the thread.
The artifacts/noise in the left channel are gone!
sulkie said:
Great news! I just tried the fix from that thread and it worked. Here's the post: http://forum.xda-developers.com/showpost.php?p=59601465&postcount=150
I'm using stock rom which had 3 mixer xml files and I edited 2 of them, mixer_paths.xml and mixer_paths_qcwcn.xml. Also, instead of changing the value to 0, I deleted the entire line as it was suggested later in the thread.
The artifacts/noise in the left channel are gone!
Click to expand...
Click to collapse
But mine is stock on stock Lollipop via official update and with the hiss coming from the right side.
Please excuses my ignorance but I know nothing about accessing and editing a ROM.
How do I get into the rom and into the file called system/etc"?