Hello there ,
i flash my m250s with i9100 rom.but it wont complete.please help me out.
thank you.
i get this when i flash with odin
Code:
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> zImage
<ID:0/040> NAND Write Start!!
<ID:0/040> boot.bin
<ID:0/040> modem.bin
<ID:0/040> Sbl.bin
<ID:0/040> cache.img
<ID:0/040> factoryfs.img
<ID:0/040> hidden.img
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<ID:0/040> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i attach screen shot of odin below
please help me
thank you very much
Dude. U shouldn't be flashing a rom that is not meant for ur unit
Sent from my GT-I9300 using xda premium
MaD-DoC said:
Hello there ,
i flash my m250s with i9100 rom.but it wont complete.please help me out.
thank you.
i get this when i flash with odin
Code:
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> zImage
<ID:0/040> NAND Write Start!!
<ID:0/040> boot.bin
<ID:0/040> modem.bin
<ID:0/040> Sbl.bin
<ID:0/040> cache.img
<ID:0/040> factoryfs.img
<ID:0/040> hidden.img
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<ID:0/040> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i attach screen shot of odin below
please help me
thank you very much
Click to expand...
Click to collapse
Check out the following forum: http://forum.xda-developers.com/showthread.php?t=1097347&page=119. Lots of good information about M250S to i9100. I converted mine successfully, however, there are some issues that come with the conversion and it isn't 100%.
Related
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Assuming you cant get into CWM or anything?
CdTDroiD said:
Assuming you cant get into CWM or anything?
Click to expand...
Click to collapse
That's correct sir.
But I can hear it connecting/reconnecting if I toggle it.
Is this a complete irreversible hard brick?
I don't think so...
I don't think so.... try to flash with heimdall!!!
or
Send to samsung.... a month ago i sent my GT-P1000 (galaxy tab) completely bricked (it doesn't power on!!!!!) in 2 weeks they have sent me a new one!!
Just Try !!!!
Cheers Cascio97
Mushinronjya said:
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Click to expand...
Click to collapse
hard bricked, you have to use riffbox
Hi all
please understand me and help ?
i have a bricked Fascinate because i flashed wrong Odin package and it dead
so that I do JTag for it to restore downloadmode,
yes it is restored to downloadmode but when i try to flash any modem or any odin rom it arrive to modem and said fail
the txt message for Odin
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> powerwashed_20_b3_Full_ec09modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> factoryfs.rfs
<ID:0/017> modem.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
note : red Color for explain
the pict can explain
sorry for bad english
thaifani said:
Hi all
please understand me and help ?
i have a bricked Fascinate because i flashed wrong Odin package and it dead
so that I do JTag for it to restore downloadmode,
yes it is restored to downloadmode but when i try to flash any modem or any odin rom it arrive to modem and said fail
the txt message for Odin
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> powerwashed_20_b3_Full_ec09modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> factoryfs.rfs
<ID:0/017> modem.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
note : red Color for explain
the pict can explain
sorry for bad english
Click to expand...
Click to collapse
If you flashed with the wrong package
I would Highly recommend flashing with the Verizon OTA Full package -- eh03_full_odin.tar.md5
make sure you have the atlas_v2.2.pit
if that doesn't work for some reason please try with the Odin3 v1.83 instead of the 3.04 version
.
thanks i will try
hhp_211 said:
If you flashed with the wrong package
I would Highly recommend flashing with the Verizon OTA Full package -- eh03_full_odin.tar.md5
make sure you have the atlas_v2.2.pit
if that doesn't work for some reason please try with the Odin3 v1.83 instead of the 3.04 version
.
Click to expand...
Click to collapse
i will try and tell you what the result
not solved and same error
hhp_211 said:
If you flashed with the wrong package
I would Highly recommend flashing with the Verizon OTA Full package -- eh03_full_odin.tar.md5
make sure you have the atlas_v2.2.pit
if that doesn't work for some reason please try with the Odin3 v1.83 instead of the 3.04 version
.
Click to expand...
Click to collapse
Please help me , I get this error
ID:0/346> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> eh03_full_odin.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/346> Odin v.3 engine (ID:346)..
<ID:0/346> File analysis..
<ID:0/346> SetupConnection..
<ID:0/346> Initialzation..
<ID:0/346> Set PIT file..
<ID:0/346> DO NOT TURN OFF TARGET!!
<ID:0/346> Get PIT for mapping..
<ID:0/346> Firmware update start..
<ID:0/346> factoryfs.rfs
<ID:0/346> recovery.bin
<ID:0/346> zImage
<ID:0/346> boot.bin
<ID:0/346> cache.rfs
<ID:0/346> dbdata.rfs
<ID:0/346> modem.bin
<ID:0/346>
<ID:0/346> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@thaifani
Try this::
Keep Odin open and change USB ports, remount the PDA & flash.
You may need to do this 3 - 4 tries before it works completely
.
not worked
any help please
hi, thaifani ...... I have got the same problem. I can only enter the Download mode ... if try to flash anything .... NAND WRITE Failed. Don't know what to do. My warranty expired 2months ago. I was running on KitKat 4.4.2 rooted for 3 months without any problems.
Hi
when i try flash E210K to 4.3 stock firmware phone stuck at Sboot.bin file..now phone in download mode only
is there any solution for this>
<ID:0/051> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> E210KKKUGNA3_E210KKTTGNA3_E210KKKNA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/051> Odin v.3 engine (ID:51)..
<ID:0/051> File analysis..
<ID:0/051> SetupConnection..
<ID:0/051> Initialzation..
<ID:0/051> Get PIT for mapping..
<ID:0/051> Firmware update start..
<ID:0/051> sboot.bin
<ID:0/051> NAND Write Start!!
<ID:0/051>
<ID:0/051> Complete(Write) operation failed.
<ID:0/051> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you
Up this thread ..
E210K is the Korean variant of the s3, are you sure this is the model number of your phone? Flashing the wrong ROM will cause a brick because the partitions can be mounted differently
Sent from my GT-I9300 using Tapatalk
a friend came with a phone that didn't start and was stuck on boot
1. did full wipe, still the same
2. tried to flash via odin new stock rom, ended with this:
Code:
<ID:0/073> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/073> Odin v.3 engine (ID:73)..
<ID:0/073> File analysis..
<ID:0/073> SetupConnection..
<ID:0/073> Initialzation..
<ID:0/073> Get PIT for mapping..
<ID:0/073> Firmware update start..
<ID:0/073> SingleDownload.
<ID:0/073> sboot.bin
<ID:0/073> NAND Write Start!!
<ID:0/073> FAIL!
<ID:0/073>
<ID:0/073> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/073> Removed!!
is it dead or can i save it?
iakovl said:
a friend came with a phone that didn't start and was stuck on boot
1. did full wipe, still the same
2. tried to flash via odin new stock rom, ended with this:
Code:
<ID:0/073> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK7_I9300OJKGNB1_I9300JKUGNB2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/073> Odin v.3 engine (ID:73)..
<ID:0/073> File analysis..
<ID:0/073> SetupConnection..
<ID:0/073> Initialzation..
<ID:0/073> Get PIT for mapping..
<ID:0/073> Firmware update start..
<ID:0/073> SingleDownload.
<ID:0/073> sboot.bin
<ID:0/073> NAND Write Start!!
<ID:0/073> FAIL!
<ID:0/073>
<ID:0/073> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/073> Removed!!
is it dead or can i save it?
Click to expand...
Click to collapse
Nand Write fail usually means your Nand is corrupt/damaged you could try rescue firmware but i doubt it will work looks like service repair..
hi to all, a friend give me his phone after an upgrade with kies. Now it stuck on start up logo.
I try to enter in download mode but odin say me fail message after start button.
I try to enter in recovery mode but you can see in image some error...
I try to upgrade phone with kies in download mode but after put model and s/n program say mt that i don't have admin permission
I try to connect phone with kies but phone phone not recognize mtp usb driver
Phone has custom binary download:yes (2 counts)
How can i solve?
[/ATTACH][/ATTACH]
none help me, please???:crying::crying:
mafo82 said:
none help me, please???:crying::crying:
Click to expand...
Click to collapse
Try to flash the latest firmware for your I9300 and look if it do the same error.
Sent from my GT-I9300 using XDA Free mobile app
Same error, odin not work
Sent from my HTC One X+ using XDA Free mobile app
Try but odin not work
Sent from my HTC One X+ using XDA Free mobile app
mafo82 said:
Same error, odin not work
Sent from my HTC One X+ using XDA Free mobile app
Click to expand...
Click to collapse
What is the error in Odin ?
Sent from my GT-I9300 using XDA Free mobile app
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300PHNGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 1)
mafo82 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300PHNGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try the rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << also try odin 1.85 >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 << The rescue firmware containes a pit file which is in version 4.1.2 in the thread but can be used on both roms follow instructions exactly
and this after
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try downgrading the boot loader to version BLFB using Odin before flashing the full firmware.
Also, ensure kies is not running while Odin is.
how?what i search on forum?sorry for my english...
i found this http://forum.xda-developers.com/gal.../util-sboot-checker-simple-downgrade-t2081748 but link to download hboot not work
anyone help me please?
mafo82 said:
anyone help me please?
Click to expand...
Click to collapse
I can't help you more sorry,
For hboot try to research on google ?
Sent from my GT-I9300 using XDA Free mobile app