Hi all
please understand me and help ?
i have a bricked Fascinate because i flashed wrong Odin package and it dead
so that I do JTag for it to restore downloadmode,
yes it is restored to downloadmode but when i try to flash any modem or any odin rom it arrive to modem and said fail
the txt message for Odin
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> powerwashed_20_b3_Full_ec09modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> factoryfs.rfs
<ID:0/017> modem.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
note : red Color for explain
the pict can explain
sorry for bad english
thaifani said:
Hi all
please understand me and help ?
i have a bricked Fascinate because i flashed wrong Odin package and it dead
so that I do JTag for it to restore downloadmode,
yes it is restored to downloadmode but when i try to flash any modem or any odin rom it arrive to modem and said fail
the txt message for Odin
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> powerwashed_20_b3_Full_ec09modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> boot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.rfs
<ID:0/017> dbdata.rfs
<ID:0/017> factoryfs.rfs
<ID:0/017> modem.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed.
<ID:0/017> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
note : red Color for explain
the pict can explain
sorry for bad english
Click to expand...
Click to collapse
If you flashed with the wrong package
I would Highly recommend flashing with the Verizon OTA Full package -- eh03_full_odin.tar.md5
make sure you have the atlas_v2.2.pit
if that doesn't work for some reason please try with the Odin3 v1.83 instead of the 3.04 version
.
thanks i will try
hhp_211 said:
If you flashed with the wrong package
I would Highly recommend flashing with the Verizon OTA Full package -- eh03_full_odin.tar.md5
make sure you have the atlas_v2.2.pit
if that doesn't work for some reason please try with the Odin3 v1.83 instead of the 3.04 version
.
Click to expand...
Click to collapse
i will try and tell you what the result
not solved and same error
hhp_211 said:
If you flashed with the wrong package
I would Highly recommend flashing with the Verizon OTA Full package -- eh03_full_odin.tar.md5
make sure you have the atlas_v2.2.pit
if that doesn't work for some reason please try with the Odin3 v1.83 instead of the 3.04 version
.
Click to expand...
Click to collapse
Please help me , I get this error
ID:0/346> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> eh03_full_odin.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/346> Odin v.3 engine (ID:346)..
<ID:0/346> File analysis..
<ID:0/346> SetupConnection..
<ID:0/346> Initialzation..
<ID:0/346> Set PIT file..
<ID:0/346> DO NOT TURN OFF TARGET!!
<ID:0/346> Get PIT for mapping..
<ID:0/346> Firmware update start..
<ID:0/346> factoryfs.rfs
<ID:0/346> recovery.bin
<ID:0/346> zImage
<ID:0/346> boot.bin
<ID:0/346> cache.rfs
<ID:0/346> dbdata.rfs
<ID:0/346> modem.bin
<ID:0/346>
<ID:0/346> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
@thaifani
Try this::
Keep Odin open and change USB ports, remount the PDA & flash.
You may need to do this 3 - 4 tries before it works completely
.
not worked
any help please
hi, thaifani ...... I have got the same problem. I can only enter the Download mode ... if try to flash anything .... NAND WRITE Failed. Don't know what to do. My warranty expired 2months ago. I was running on KitKat 4.4.2 rooted for 3 months without any problems.
Related
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Assuming you cant get into CWM or anything?
CdTDroiD said:
Assuming you cant get into CWM or anything?
Click to expand...
Click to collapse
That's correct sir.
But I can hear it connecting/reconnecting if I toggle it.
Is this a complete irreversible hard brick?
I don't think so...
I don't think so.... try to flash with heimdall!!!
or
Send to samsung.... a month ago i sent my GT-P1000 (galaxy tab) completely bricked (it doesn't power on!!!!!) in 2 weeks they have sent me a new one!!
Just Try !!!!
Cheers Cascio97
Mushinronjya said:
I made the mistake of attempting to apply the US region stock ROM to my apparent Europe version (KJ4) galaxy note.
In so doing, it now won't seem to turn on.
However, I can hear it connect and disconnect from the computer if I toggle the power button. I'm assuming it's continuously in the download mode until I get it out? I don't know, since nothing shows up on the screen. Am I screwed? Should I attempt a replacement?
Please help me.. if I posted in the wrong forum, please move the post.
I will give you my first born if you can help me, no strings attached.
<ID:0/012> Added!!
<ID:0/012> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7310XEUKJ4_P7310XXKJ4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Set PIT file..
<ID:0/012> DO NOT TURN OFF TARGET!!
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've made sure no KIES things were running on my PC.
I've tried different USB ports.
I've unzipped Odin3 again.
Worst part is that I changed my SIM over from my iPhone4 already, so I have no phone.. no ladies now... nothing. I'm turning into a monk.
Tried to flash firm:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
...and again.. sits at "modem.bin"
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKKA_N7000XEUKK3_N7000XXKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> zImage
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.bin
<ID:0/011> modem.bin
Click to expand...
Click to collapse
hard bricked, you have to use riffbox
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I can't help, but I have a note for you:
I9100 is a different model from your I9100G
So you wasn't supposed to install I9100 roms over your I9100G
you should Install only the roms related to your model.
Sent from my GT-I9100G using Tapatalk
Hey dude, I found something that likely can help you,
check this link:
http://forum.xda-developers.com/showthread.php?p=21471558
Sent from my GT-I9100G using Tapatalk
Don't panic. You can boot into Download Mode and odin recognizes your phone.
You are not bricked.
just2mit said:
Hi my name is amit today i tired updating my galaxy s2 i9100g with ics (wasnt aware that its not supported) with odin and it showd me fail and now i am unable to switch it on it just shows phon and yellow triangle and computer logo
when i connect it ot pc odin recognizes but kies not can sum1 please help me out m a new to android how can i fix it
is it bricked ?
this what odin showd when i tried to update
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_SEB_I9100XXLPQ_I9100OXXLPD_I9100XXLPQ.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> boot.bin
<ID:0/015> NAND Write Start!!
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
I encountered this things once. i check and found out that i did not insert my simcard. then after inserting it i can boot normally. so you better check if the simcard is there
Hello there ,
i flash my m250s with i9100 rom.but it wont complete.please help me out.
thank you.
i get this when i flash with odin
Code:
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> zImage
<ID:0/040> NAND Write Start!!
<ID:0/040> boot.bin
<ID:0/040> modem.bin
<ID:0/040> Sbl.bin
<ID:0/040> cache.img
<ID:0/040> factoryfs.img
<ID:0/040> hidden.img
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<ID:0/040> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i attach screen shot of odin below
please help me
thank you very much
Dude. U shouldn't be flashing a rom that is not meant for ur unit
Sent from my GT-I9300 using xda premium
MaD-DoC said:
Hello there ,
i flash my m250s with i9100 rom.but it wont complete.please help me out.
thank you.
i get this when i flash with odin
Code:
<ID:0/040> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP7_I9100ODDLP9_I9100DDLPA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/040> Odin v.3 engine (ID:40)..
<ID:0/040> File analysis..
<ID:0/040> SetupConnection..
<ID:0/040> Initialzation..
<ID:0/040> Get PIT for mapping..
<ID:0/040> Firmware update start..
<ID:0/040> zImage
<ID:0/040> NAND Write Start!!
<ID:0/040> boot.bin
<ID:0/040> modem.bin
<ID:0/040> Sbl.bin
<ID:0/040> cache.img
<ID:0/040> factoryfs.img
<ID:0/040> hidden.img
<ID:0/040>
<ID:0/040> Complete(Write) operation failed.
<ID:0/040> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i attach screen shot of odin below
please help me
thank you very much
Click to expand...
Click to collapse
Check out the following forum: http://forum.xda-developers.com/showthread.php?t=1097347&page=119. Lots of good information about M250S to i9100. I converted mine successfully, however, there are some issues that come with the conversion and it isn't 100%.
Hey guys i used the one click Odin for the Verizon S4, and it gives me an error. phone will only boot into download mode
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sbl1.mbn
<ID:0/022> sbl2.mbn
<ID:0/022> sbl3.mbn
<ID:0/022> rpm.mbn
<ID:0/022> aboot.mbn
<ID:0/022>
<ID:0/022>
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone know whats going on?
thanks
I would try another cord or USB port. If you're on a desktop, try one in the back.
eric303 said:
Hey guys i used the one click Odin for the Verizon S4, and it gives me an error. phone will only boot into download mode
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> sbl1.mbn
<ID:0/022> sbl2.mbn
<ID:0/022> sbl3.mbn
<ID:0/022> rpm.mbn
<ID:0/022> aboot.mbn
<ID:0/022>
<ID:0/022>
<OSM> All threads completed. (succeed 0 / failed 1)
Anyone know whats going on?
thanks
Click to expand...
Click to collapse
It sounds like your on me7 and attempted to flash a custom recovery which you cant do. By the error log I can tell your on me7 and trying to flash mdk which you also cant do, or anything prior. Youll have to flash the stock me7 file to get back stock recovery.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
hexitnow said:
It sounds like your on me7 and attempted to flash a custom recovery which you cant do. By the error log I can tell your on me7 and trying to flash mdk which you also cant do, or anything prior. Youll have to flash the stock me7 file to get back stock recovery.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
Click to expand...
Click to collapse
thanks, but i'm not trying to flash a custom recovery, i'm just trying to flash the stock image back on. I'll look for a stock me7 file and see what happens and report back.
I Tried the ME7 file like you suggested, still same thing
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I545VRUAME7_I545VZWAME7_I545VRUAME7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thats a different error. Could of been a corrupted download. Might have to download it again, after its done I would verify the md5 to make sure you got a good download.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk.
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
falconflyer82 said:
I've been using OmniROM and TWRP for quite some time now.
I put the phone on charge and a few minutes later it was stuck on Samsung initial Screen with the usual red triangle. (Showing SAMSUNG Galaxy SIII GT-I9300)
I removed the charger and battery and restarted, it was still stuck on Samsung Boot Screen.
Any ideas how to recover the phone?
I have tried going through some of the other forum threads but most of them can't go to download mode. I can go into TWRP and download mode both. I tried recovering the phone using Kies "Firmware Initialization" but it generates "your phone cannot be upgraded to the latest version" and stops.
Click to expand...
Click to collapse
Download stock rom from Sammobile and flash in Odin..
tallman43 said:
Download stock rom from Sammobile and flash in Odin..
Click to expand...
Click to collapse
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
falconflyer82 said:
Downloaded latest stock rom ML4 and this is what I get in Odin 3.09:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/038> Added!!
<ID:0/038> Odin v.3 engine (ID:38)..
<ID:0/038> File analysis..
<ID:0/038> SetupConnection..
<ID:0/038> Initialzation..
<ID:0/038> Get PIT for mapping..
<ID:0/038> Firmware update start..
<ID:0/038> SingleDownload.
<ID:0/038> sboot.bin
<ID:0/038> NAND Write Start!!
<ID:0/038> FAIL!
<ID:0/038>
<ID:0/038> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
tallman43 said:
Nand write fail usually means dead emmc chip. You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but I think you need to send it fto service for repair.
Click to expand...
Click to collapse
I tried the rescue firmware, similar result:
Code:
<ID:0/014> Odin v.3 engine (ID:14)..
<ID:0/014> File analysis..
<ID:0/014> SetupConnection..
<ID:0/014> Initialzation..
<ID:0/014> Set PIT file..
<ID:0/014> DO NOT TURN OFF TARGET!!
<ID:0/014> FAIL!
<ID:0/014>
<ID:0/014> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
P. S. I read somewhere in case of dead emmc I shouldn't be able to see the device version in download mode. But I can..
bricked device i9300..
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
falconflyer82 said:
Did you try Odin 3.09? I too get the same result as you with Odin 3.07. With 3.09 I get the write fail error.
Click to expand...
Click to collapse
I used the 3.09 still same problem am stuked up really
If the rescue firmware and pit didn't flash then your emmc chip is damaged, either new motherboard or phone.
Sent from my GT-I9300 using Tapatalk
falconflyer82 said:
I finally took to a repair shop, they say it is my fault since I rooted it (they can see the red exclamation mark), and will charge extra for "software change".
Any idea how to reset the counter in download mode, revert to stock recovery and remove the red exclamation mark in bootloader?
Click to expand...
Click to collapse
There must be a way to reset the download count by installing stock recovery. Maybe @Chainfire can help here.
Sent from my XT1033 using Tapatalk
dupri11 said:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
it gets stuck for hours without any response ... can any one help please
Click to expand...
Click to collapse
what @boomboomer said is what you should consider.
If you keep on insisting, you will just damage the phone more ( i am talking from experience ) .
change motherboard or in some places, people can replace the emmc Chip for you.
Salam