I have searched all over the internet and have not found a problem exactly like the one i am having. My Atrix 4g will not boot. It will get to the Dual Core screen, but no farther than that. I can get to the menu by holding down the volume but and power button but when i select a menu option it does nothing. My phone was not rooted, it is factory with the lastest version on it. THe other day i pulled the phone out of my pocket at it was turned off. I wouldn't turn i so i plugged it in and that is when the problems started. Any help would be great! Thank you!
devildogfarm said:
I have searched all over the internet and have not found a problem exactly like the one i am having. My Atrix 4g will not boot. It will get to the Dual Core screen, but no farther than that. I can get to the menu by holding down the volume but and power button but when i select a menu option it does nothing. My phone was not rooted, it is factory with the lastest version on it. THe other day i pulled the phone out of my pocket at it was turned off. I wouldn't turn i so i plugged it in and that is when the problems started. Any help would be great! Thank you!
Click to expand...
Click to collapse
I wanted to add that when i connect plug usb cable into it from the laptop, the laptop does not detect the phone.
devildogfarm said:
I have searched all over the internet and have not found a problem exactly like the one i am having. My Atrix 4g will not boot. It will get to the Dual Core screen, but no farther than that. I can get to the menu by holding down the volume but and power button but when i select a menu option it does nothing. My phone was not rooted, it is factory with the lastest version on it. THe other day i pulled the phone out of my pocket at it was turned off. I wouldn't turn i so i plugged it in and that is when the problems started. Any help would be great! Thank you!
Click to expand...
Click to collapse
You might need to restore it to factory setting with an external method 'cause your phone wasn't rooted or unlocked. Search for the RSDlite method to flash the original rom. You will need to download a specfic sbf depending on the operator of your phone, but there's actually a post in the forum where they hold every sbf
joelorona said:
there's actually a post in the forum where they hold every sbf
Click to expand...
Click to collapse
No there isn't. SBFs have been taken down because they're too dangerous and using them often results in bricking the device. You'll probably have to look for SBFs elsewhere.
Is there any way to save the data on my phone?
Doubt you can save data unless you can get it recognized through adb. Have you tried the other boot modes other than fastboot and rsd?
Sent from my MB860 using xda app-developers app
JPBeard21 said:
Doubt you can save data unless you can get it recognized through adb. Have you tried the other boot modes other than fastboot and rsd?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
I have tried the Android Recovery mode but it will not going into that...
I am getting to the point that i am willing to lose the data. I would just like my phone to work again. any help would be great!
devildogfarm said:
I have tried the Android Recovery mode but it will not going into that...
I am getting to the point that i am willing to lose the data. I would just like my phone to work again. any help would be great!
Click to expand...
Click to collapse
I tried recovery mode again and while the phone was plugged in it just said "Entering Android Recovery Mode" i unplegged it and the android guy with the explanation point showed up so i plugged the phone back in real quick (didnt want the battery to die.) With that screen i tried tapping in the lower right hand corner of the screen to access the menu, but nothing would happen from that point.
UPDATE: I was able to press both volume buttons and get into the menu. I was able to select wipe/factory reset buy pushing the power buttong. It is currently rebooting.... has been for several minutes..... Hope this works!!
i tried making a factory cable last night but, it didnt turn out to good..... Is there anyway to charge the battery enough, without the phone, to allow me to flash the device?
devildogfarm said:
I tried recovery mode again and while the phone was plugged in it just said "Entering Android Recovery Mode" i unplegged it and the android guy with the explanation point showed up so i plugged the phone back in real quick (didnt want the battery to die.) With that screen i tried tapping in the lower right hand corner of the screen to access the menu, but nothing would happen from that point.
UPDATE: I was able to press both volume buttons and get into the menu. I was able to select wipe/factory reset buy pushing the power buttong. It is currently rebooting.... has been for several minutes..... Hope this works!!
i tried making a factory cable last night but, it didnt turn out to good..... Is there anyway to charge the battery enough, without the phone, to allow me to flash the device?
Click to expand...
Click to collapse
Would i be better off purchasing a factory cable off of ebay or something, or buying an charger to fully charge my battery and try flashing that way?
Related
So I broke the sceeen of my Vibrant... the screen is shattered and only shows light from the home button. touch doesnt work at all so blind anything is pretty much out. I want to get the photos and videos off of the devices internal memory... but i have no access. are there any programs out there that can help me out? or does anyone know any tricks I could try?
So the phone fully boots? What ROM are you using? Are you rooted? Is debugging enabled?
it fully boots, stock rom 2.1, rooted, and debugging is not enabled.
Can you use the volume buttons to boot to recovery? Might be able to pull some files with adb if you can get there.
Are you using stock recovery as well?
no its cwm recovery...
1.) Power off.
2.) Hold both volume buttons. Push and hold power button (to power on phone). When Vibrant screen appears (guess lol), release power button (but keep holding volume buttons)
3.) It should eventually get to CWM recovery. From there you can pull files to pc with adb
should be simple enough to blind.. the screen doesnt turn on at all soo.. yeah. but i'll give it a try -- thanks.
Should be about 1.5 seconds or so before releasing power button. (That's on mine anyway)
ok how would i do this in adb?
Sorry about the delay.
If you have access to adb from CWM recovery, all you need to do is "adb pull /sdcard"
This will pull all files on your internal (and probably external as well) storage to your current directory.
If you're specifically wanting stuff from your camera, you can run "adb pull /sdcard/DCIM"
Hope this helps.
got it! thank you very much!!
Cool. What did you end up doing?
So, I have this same problem, but have zero experience with andriod. I have been a windows mobile guy in the past, now on the iphone. Now I am sitting here with my brother's vibrant that has all his baby's pictures on it. Any help stepping me through this would be awesome. I have zero screen visibility, but you can tell there is some activity. The home buttons light up at the bottom.
^^ The exact same thing happened to me this weekend. I'm working on fixing it. I can't seem to get into CWM either, so no adb pull to get a backup yet. I can't even seem to get into download mode. mwmcginn, what ROM is your brother using? For the record, I was using the MIUI 1.4.29, I think. I'm not sure if there is a physical problem with the screen or if this is software.
I have the same problem, my screen got cracked and got my replacement via insurance. I just now realized the old one has to be sent back and having MIUI on it, I went to download mode (knowing the steps) and flashed back to JFD. Now I don't have any debugging enabled or root access or CWM installed.
What options do I have? Is there an ODIN that come prerooted and with CWM that I can then try adb?
Someone please help, as I don't really feel comfortable sending my phone full of private data to them.
Thank you.
M5devil said:
I have the same problem, my screen got cracked
Click to expand...
Click to collapse
I tried to fix mine (taking things apart usually fixes them, right?) and ended up cracking my screen. Now I get to pay $150 for a new screen, as I use my Vibrant on ATT so no warranty At least my phone will be working again. Going back to an old Nokia suuuucks!
clofan said:
I tried to fix mine (taking things apart usually fixes them, right?) and ended up cracking my screen. Now I get to pay $150 for a new screen, as I use my Vibrant on ATT so no warranty At least my phone will be working again. Going back to an old Nokia suuuucks!
Click to expand...
Click to collapse
This sucks man...
There must be some way to automatically load the sd card in windows. I even tried in Mac, as I read somewhere that it loads as soon as usb is plugged... Well I did that on my bro's mac and nothing happened, unless there are some commands that I have to follow... I am a dummy when it comes to Mac
Any other ideas?
Sent from my SGH-T959 using XDA Premium App
i flashed stock froyo and my phone will not turn on.
already tried the battery pull,combo buttons (download and recovery)
what happened: i flashed back to stock froyo and all loaded successfully with odin.
as it started to reboot the screen went blank.
any ideas?
HELP!!!!
Usb jig if u cant get into dl mode.
Sent from my SGH-T959 using XDA Premium App
Check what you odin'ed...see if it contained sbl.bin.
and what were you flashing from??
Try flashing stock eclair 2.1. And then upgrade your rom from there.
Sent from my SGH-T959 using XDA Premium App
THANKS for all of your suggestion. i tried all of the above an no luck.
So you've already tried the USB jig to access DL mode like @movieaddict suggested and still can't? Thats odd..... What kinda life are you getting out of the phone? Does it turn on at all? How about plugging the USB into the PC or a charger.... anything? spindles or the battery charging icon?
- If the phone is completely dead as in your getting NO life at all then it is in fact HARD BRICKED. I have heard about a JTAG fix for HARD BRICKED Vibrants and I assume its similar to the XBOX360 deal that most of us have probably done in the past, but I have not personally on the Vibrant. I know there is a youtube video/tutorial. Unfortunately thats pretty much all I know about that. I would suggest a google search or search the Q&A threads here for something like:
"Samsung, Vibrant, hard, bricked, jtag"
Good luck!
I would not recommend trying jtag yourself, as you have to rub away a section of the motherboard to access certain solder points and it requires a very expensive jtagging device. If it is truly bricked you can send it to these guys and they will jtag it and bring it back to life for you.
http://www.mobiletechvideos.com/blog/?page_id=778
Already have you on the right page there. It's the second one on that list.
I agree with the above post. Its probably not something everyone should attempt. Although I think most will realize that when you see all that is involved. Here is the thread that I first heard about it:
http://forum.xda-developers.com/showthread.php?p=13981538#post13981538
I'm sure if you PM @connexion2005 would be more than willing to help you out as well. Good luck!
smali26 said:
i flashed stock froyo and my phone will not turn on.
already tried the battery pull,combo buttons (download and recovery)
what happened: i flashed back to stock froyo and all loaded successfully with odin.
as it started to reboot the screen went blank.
any ideas?
HELP!!!!
Click to expand...
Click to collapse
So your phone isn't responding at all? Try holding power and volume +. You might get a screen with orange text on it. This worked for me.
From there you can get to download mode by plugging the phone in and using the three finger method.
kawika said:
so you've already tried the usb jig to access dl mode like @movieaddict suggested and still can't? Thats odd..... What kinda life are you getting out of the phone? Does it turn on at all? How about plugging the usb into the pc or a charger.... Anything? Spindles or the battery charging icon?
- if the phone is completely dead as in your getting no life at all then it is in fact hard bricked. I have heard about a jtag fix for hard bricked vibrants and i assume its similar to the xbox360 deal that most of us have probably done in the past, but i have not personally on the vibrant. I know there is a youtube video/tutorial. Unfortunately thats pretty much all i know about that. I would suggest a google search or search the q&a threads here for something like:
"samsung, vibrant, hard, bricked, jtag"
good luck!
Click to expand...
Click to collapse
no life at all. I have tried holding tHe button for 30 sec. Still not result. also tried the battery on another person vibrant and it worked.
smali26 said:
no life at all. I have tried holding tHe button for 30 sec. Still not result. also tried the battery on another person vibrant and it worked.
Click to expand...
Click to collapse
may i ask what did you flash and what rom was on your phone before. Knowing what was flashed and where you were coming from may probably help us better to understand what is happening.
try press volume down and up button hold it and plug data cable connected to ur computer. That will let u boot to download mode. Try and let me kw how it went.
Same thing happened to me, I was able to fix by the following post...
1. Start AIO toolbox
2. Power off the Phone.
3. Pull the Battery.
4. Plug USB cable into Phone.
5. Plug USB cable into PC.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
The idea is to get ODIN to see your phone again.
Anyway to fix my brick? I used Odin to restore my phone back to stock, and then used kies to update it back to the latest (none rooted) build, after said it was done and needs to restart but my phone was black screen and now wont turn on. No matter how long it charge/hold down any combination of buttons / anything it does no turn on not even light up black its like if it is completely dead, can anyone tell me how this could have happened everything updated fine.
I don't know how it could have happened, we take your word for it. I know you said you tried different button combinations, but have you tried to get into download mode? If that doesn't work, try using a jig to induce the phone into download mode. If that doesn't work, you can probably have it jtagged. Or buy a nexus s )
Sent from my Nexus S using XDA App
Yes I can't get no response not even download mode, ok how do I jig and jtag? any guid so n how to do it, i'll try anything before having to run to tMobile and saying an update broke it lol
It sounds like you destroyed the bootloader. I was in the same situation when I flashed the GB bootloader by checking the reboot checkbox. To get back, I removed the battery, hold vol up + vol down + power, launched odin, plug usb, and slide the battery in.
tanner2007 said:
Anyway to fix my brick? I used Odin to restore my phone back to stock, and then used kies to update it back to the latest (none rooted) build, after said it was done and needs to restart but my phone was black screen and now wont turn on. No matter how long it charge/hold down any combination of buttons / anything it does no turn on not even light up black its like if it is completely dead, can anyone tell me how this could have happened everything updated fine.
Click to expand...
Click to collapse
Tried it, and just tried it again, no luck, no response, im almost certain its hardbrick, and I am willing it jtag it if I can =/
Try the following steps:
1. Removed the battery
2. Plug the usb to you pc and phone
3. Hold vol up + vol down + power
4. Slide the battery in
tanner2007 said:
Tried it, and just tried it again, no luck, no response, im almost certain its hardbrick, and I am willing it jtag it if I can =/
Click to expand...
Click to collapse
VibrantThemer said:
Try the following steps:
1. Removed the battery
2. Plug the usb to you pc and phone
3. Hold vol up + vol down + power
4. Slide the battery in
Click to expand...
Click to collapse
I did that, many times....
Watch this video --> http://www.youtube.com/watch?v=rqxearzXrVY
tanner2007 said:
I did that, many times....
Click to expand...
Click to collapse
I kno sir, Iv been in that mode many, many, many times, this time nothing on my phone works...its dead
How old is the phone? Could it still be under one year warranty from Tmobile? If it is still within one year call up and tell them you tried to update with Kies and it screwed your phone.
Sent from my SGH-T959 using XDA App
archie53 said:
How old is the phone? Could it still be under one year warranty from Tmobile? If it is still within one year call up and tell them you tried to update with Kies and it screwed your phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It is, small problem, small crack on lower left part of screen, almsot not noticable but with that idk if im have to pay some huge amount of money with I don't have and if i have to id rather by a new phone..
I was in the same situation. Any of the methods mentioned before don't worked for me because you have a hard brick.. your only option is a RIFF Box JTAG.
I send my phone to this ebay seller and he repair my phone the same day and the same day he ship me back my phone.
http://cgi.ebay.com/Samsung-Galaxy-...ultDomain_0&hash=item3f0c87e20b#ht_719wt_1344
If the item expired on ebay you can find the seller items in here:
http://shop.ebay.com/olegor215/m.html?_trksid=p4340.l2562
or search for the sellers name ( olegor215 )
Sorry for my bad english
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
That's exactly what I would do
Sent from my SAMSUNG-SGH-I717 using XDA App
if you can get into download mode try reflashing the stock recovery found in the dev section then if you can get that fair try flashing the odin stock rom to see if it will boot
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
foxbat121 said:
Read his OP. He can't get into the download mode even with a Jig.
I have yet to encounter any one as reckless as OP trying so hard to brick the phone
Click to expand...
Click to collapse
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
BLOWNCO said:
he never said if he tried with the hardware buttons doesn't mean he cant do it if hes been trying the jig
Click to expand...
Click to collapse
If jig won't work, I'm pretty sure hardware button won't work either. It goes without saying that he probably already tried everything he could find.
edpsx said:
Somebody has to be the guinea pig I guess lol. Glad it wasnt me. LOL Only thing worse is the Will it blend guy or the iFix it tear downs lol.
Click to expand...
Click to collapse
That's not guinea pig. He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
foxbat121 said:
Did you try return to the store where you boought it? If your phone don't show anything on the screen, there is no way store knows what's going on with your phone unless you tell them the truth
Click to expand...
Click to collapse
Yeah I thought about doing that - worst case scenario they tell me I voided my warranty and give me the phone back and I can still try finding a jtag solution or do i have to face any other consequences including maybe never getting my phone back?
foxbat121 said:
He did couple wrong things in a row (wrong ROM, god know what he is doing with abd and then unplug the phone in the middle of flashing or something). If I'd make a guess, he screwed up the bootloader.
Click to expand...
Click to collapse
That's my guess too. I screwed up badly. I would like to blame it on the late hour I did all that but it was just overexcited stupidity -_-
Try your buttons...
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
brojoe11 said:
Everybody's talking about whether you tried to get into download mode with buttons, but You have not said for sure you tried it.
Hold down down volume button, home button and power button all at the same time. You don't know for sure until you try it.
Click to expand...
Click to collapse
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
cilmeron said:
I'm sorry that I wasn't being very clear on this but I have tried and it didn't work. Thanks though.
Click to expand...
Click to collapse
I know on some phones that download mode can still be activated even if the screen isn't working properly and displaying it. I know many infuse users ran into problems and were still able to use Odin to flash stock and fix their phone. Try doing the hardware method of getting into download mode, and even though your screen doesn't show anything, it may still connect to Odin and you could try to flash back to stock.
Sent from my SGH-I997 using xda premium
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
mintu123 said:
U cant brick these phones.use the hardware buttons to get into download mode.
Take battery out and put it back in.hold power vol down and home for 20sec and then press vol up and plug into ur pc with odin running.u should see something on port section.
If that dont work.hold power and both vol. Buttons for 30 sec. Then press vol.up and plug in usb.hope it works.
Click to expand...
Click to collapse
Actually, you can brick it to the point of needing JTAG repairs to restore your device. That being said, it's very very very hard to brick it. You have to do something like flash firmware for a completely wrong device and screw up your bootloaders in the process.
cilmeron said:
I bricked my galaxy note i717 beyond recovery with a regular jig. I've looked into jtag but I haven't found any information whether it's viable for the i717 (i.e. which jtag it's using, which box I would need, where I would need to bring it etc etc.)
So here's my question: Do any of you guys know any more about how to unbrick the phone or details about whether/how to unbrick using jtag?
Maybe I've overlooked something else. Here's how it went down:
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Anyway any advice would be highly appreciated.
Click to expand...
Click to collapse
I've read some so my suggestion is this:
First make sure that you have the drivers installed for your phone. Then pull the battery wait for a few seconds. press the down button and then the power to go in download mode and hold them pressed for 20s. Now plug in the USB and press the volume up button. If Odin detects it you're good to go! If not... Well it's worth a shot
My theory is that even though the screen is blank, the hardware still boots properly. Just make sure your battery is somewhat charged. And also plug in the USB AFTER you "boot" in download mode.
Sent from my SGH-I717R using xda premium
I was stupid and tried to flash the phone with firmware for the N7000 because I was overexcited and didn't know that it wasn't an n7000. Now the recovery mode wouldn't let me upgrade (understandable reasons I guess) so I decided to force flash it with odin which also didn't let me upgrade the phone. So I used some method relying on adb. The process took way to long so I unplugged the phone mid-way through it, then replugged it and suddenly the process reported success. So the phone started rebooting just that instead of actually booting up it stayed black. Pressing any of the buttons yields no response - neither vibration nor any screen response. Using the usb jig also yields no response but I'm not entirely sure if there's a jig method that might work - or a key combo that might work - or even a usb method that might work.
Click to expand...
Click to collapse
Everything here screams 'you should never attempt to modify your device again.'
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Why don't you find Adam_Outler in the hardware hacking forum? Send your phone to him and he'll hopefully be able to create an unbrickable mod. Not only will you likely have a fixed phone but it will mean volumes for our community.
Note, you will be without a phone for a bit
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
ekerbuddyeker said:
What is it with all you smart asses telling him he shouldn't have done it??? What, you never made a mistake in your entire life???
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
It's not that, we've all made mistakes, but it's like this guy went out of his way to try to brick the phone. This isn't like "oh crap, I flashed the wrong radio"
He tried to flash a ROM from a different SoC and every fail-safe wouldn't let him do it. I'm surprised at how well the different programs tried to save his phone, then he actually went ADB and forced it onto his phone and then he unplugs during a flash.
It's like he drove his car without paying attention and hit a fence that prevents you from flying off a cliff, then he kept ramming his car into the fence, then took some C4, blew up the fence, drove off the cliff, then started yelling "help, I fell off the cliff"
N3RD420 said:
I did something stupid to my note too so don't feel too bad. **** happens... I returned my note to att with no problem because my screen was permanently black. Wouldn't do anything download mode,cwm nothin.. Flashed gsm kernel from root so beware the way its layed out u won't know its gsm unless you read it extremely careful. I had read the thread three times and only caught it after i read really slowly post-brick.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm confused, is there a CDMA Note? What do you mean "they won't know it's GSM"?
I dropped my phone a few days ago and the power button stopped working. Reboot ed into recovery from Rom Manager and realized that I couldn't select anything because I need the power button (tried every other button as well; nothing works). Took the battery out and put it back in (the only way to turn it off now) and it instantly booted into recovery. I can't send it to AT&T because I have at least 10 counts and they'll instantly see that CWM is on there.
Please help me!
kancheek1995 said:
I dropped my phone a few days ago and the power button stopped working. Reboot ed into recovery from Rom Manager and realized that I couldn't select anything because I need the power button (tried every other button as well; nothing works). Took the battery out and put it back in (the only way to turn it off now) and it instantly booted into recovery. I can't send it to AT&T because I have at least 10 counts and they'll instantly see that CWM is on there.
Please help me!
Click to expand...
Click to collapse
You dropped your phone. Samsung/AT&T warranty doesn't cover accidents, so there's no sense in worrying about your flash count. You're SOL. But you are free to try of course. Reverting to stock is very easy. What would you even do in recovery mode to revert to stock? Did you bother to look around the forum? There is a guide in the general forum on how to do that.
Out of curiosity, I did a google search to see what the repair options were for a broken power button. Saw that Mobile Tech Videos does it for $35 + shipping. Might be one of the better options at this point. As for the counter, just buy or make a jig to reset it.
mzaur said:
You dropped your phone. Samsung/AT&T warranty doesn't cover accidents, so there's no sense in worrying about your flash count. You're SOL. But you are free to try of course. Reverting to stock is very easy. What would you even do in recovery mode to revert to stock? Did you bother to look around the forum? There is a guide in the general forum on how to do that.
Click to expand...
Click to collapse
They wouldn't know that I dropped it unless I told them that, so as of right now the button stopped working by itself. I reverted to stock a while ago when I thought I bricked it, but I need to get it into download mode which can't be done without the power button.
kancheek1995 said:
They wouldn't know that I dropped it unless I told them that, so as of right now the button stopped working by itself. I reverted to stock a while ago when I thought I bricked it, but I need to get it into download mode which can't be done without the power button.
Click to expand...
Click to collapse
Recovery mode requires the power button. Download mode only requires the two volume buttons. With the phone off, while holding down vol- & vol+ plug in USB cable.
Lawrence of a Labia said:
Out of curiosity, I did a google search to see what the repair options were for a broken power button. Saw that Mobile Tech Videos does it for $35 + shipping. Might be one of the better options at this point. As for the counter, just buy or make a jig to reset it.
Click to expand...
Click to collapse
Good info if I ever need this
Has anybody used mobile tech videos to get their power button fixed? Mine stopped working out of the blue today, my phone is long out of warranty, and it refuses to connect to my computer at all so I can't revert to stock (I'm running AOKP 6.27.12 Build right now). I don't want to just send my phone off to some place that isn't reputable.
elementlaxer said:
Has anybody used mobile tech videos to get their power button fixed? Mine stopped working out of the blue today, my phone is long out of warranty, and it refuses to connect to my computer at all so I can't revert to stock (I'm running AOKP 6.27.12 Build right now). I don't want to just send my phone off to some place that isn't reputable.
Click to expand...
Click to collapse
It's still got to be in warranty with Samsung. The first units were shipped just under 9 months ago.
Mobile tech videos is considered to be quite reputable. I have only seen good reports about them, and the owner posts actively on the XDA-Developers boards.
You should be able to enter download mode. You don't need the power button for that.
Darn I didn't realize how long Samsung's warranties were. I made the switch back in October from Apple products so I'm used to crappy warranties.
I've already shipped to mobile tech videos because I searched around the forums a bit and found out that he is in fact reputable.
And I know how to get into download mode, I can do that no problem. My computer always pops up saying there is some problem with the device and I'm not sure how to fix it. I have the drivers installed correctly and it has worked in the past, but not recently. I would try to replicate it now but I don't have the phone in my possession, and at the moment it isn't really causing me an issue.
If you can't get Odin to recognize the phone once connected to the computer in download mode, then it is most likely a driver problem, or less likely a problem with the USB cable or ports. Once you get the phone back, if you still have the problem, that is where to look first.
I just wanted to point out that the broken power button would not prevent you from returning the phone to stock, although it can be a bit of a problem that you can't use recovery.
Yeah I was a bit worried that if I tried to go through Odin and something got messed up I wouldn't be able to get back into recovery to restore from a backup.
Thanks for all the help! I feel like a total noob and I appreciate your patience haha
In case you haven't already tried, in some versions of CWM (even non-touch) the search button (softkey) works like enter. Try all of the softkeys, one of them might work for you.
Yes, but if you Odin back to stock with a broken power button, that leaves you with stock 3e recovery. Even if you use adb reboot recovery to get into 3e recovery, you can't select anything without the power button.