Related
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!! (still have SuperSU app but doesnt work or gets uninstalled)
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!! Downloaded latest Kies and had it closed from task manager and all its related apps off too but Still odin wont recognize it in download mode!! been tryin since i did the Darn UPDATE! PLZ HELP :S
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
JJEgan said:
sohaib770 said:
Hey all
I have a Galaxy S3 i9300... Today I got the OTA for 4.1.1 Jellybean I updated and now I lost my root!!!
>>>>>Of course you lost root .
(still have SuperSU app but doesnt work or gets uninstalled)
>>>> Root the phone again .
Now I am trying to root it again but Odin3 v1.85 wont recognize my Phone in download mode!! Recognizes it when phone is on but not when its off!!
>>> Phone is supposed to be on and in download mode not off to use Odin .
Possible failed OTA update as per multiple posts due to root not removed .
Leading to USB on phone not recognized try a factory reset first .
jje
Click to expand...
Click to collapse
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Try Odin 3.04
sent from here, there, somewhere!!
Click to expand...
Click to collapse
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
sohaib770 said:
JJEgan said:
Thanks for the reply
Sorry it was on and in download mode didnt get recognized :S and tried factory reset too!!! still no luck
Click to expand...
Click to collapse
Plz Respond someone....
Click to expand...
Click to collapse
THAnks!!!!!!!!!!! Shifting usb to back of computer worked!!! U SAVIOURS THANKS A LOTT!!!!
Galaxy S3 not being recognized in odin in download mode
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Issues with usb on s3
Actually fixed my own Question....
My phone was in download mode and was not being recognized by my computer my windows 7 computer. I pressed the usb icon, where a box popped up saying that there was an unknown device. You could find this in device manager.
I then went to device manager to update the driver instead of pointing the device directly to the driver when i clicked browse my computer for software then it shows a location and option to let me pick from a list of device drivers on my computer then a box pops up showing model above that there is a little check box uncheck that two boxes will appear with manufacturer and model
Scroll samsung electronics and model samsung mobile composite device that is what you want to update the driver to...
I pulled the battery then re-entered download mode and windows to over installing the rest now it works fine. I would attach images but it will not let me for some reason. if anyone can help with that I will do it later.
THIS COULD POSSIBLY help with devices not being found on computers in bootloader or just on rom loaded and running..
Skywatcher1 said:
Could someone please assist.
My rooted Galaxy S3 phone (FW v4.1.2) is stuck at the Samsung startup screen after installing a font app from the app store
To resolve I have tried:
1. The recovery screen - doing a factory reset and reboot
2.. Reflash through ODIN.
I can get get the phone into download mode but ODIN will not recognize the phone in Download mode (Funny that phone is recognised by Odin at the stuck Samsung boot screen)
- I have unistalled and reinstalled KIES and USB drivers
- I am using the stock USB cable
- Tried different USB ports on computer
- Tried on different computers
The problem may be Windows driver related. Because phone gets stuck at the Samsung startup screen, all processes of driver installation do not conclude successful. "MTP USB Device" shows error in Windows Device manager, USB composite deivce.
Uninstalled and reinstalled these a couple of times without success.
Please assist
Click to expand...
Click to collapse
have you got the necessary drivers also you need to stop all kies activities.
uable to see added message inn download mode
tian105 said:
reinstall drivers, try a different usb port. if using a desktop, use the ports on the back of the PC
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
uable to see added message inn download mode!!!!!!!!!!
Please help
Maybe solved it
Hey guys, i know it's a bit late now, but i had exactly the same problem with my gt-i9300 (got stuck on samsung splash screen and odin didn't recognize it in download mode) and just realised that everytime, i connected my phone to my PC in download mode, a message would appear that "Gadget Device" (or something like that) was connected. Then i searched in my device manager for the name of it (i found it under USB-Devices) and uninstalled the driver of it. As i connected it again with odin started it would install the driver automatically and *swoosh* odin recognized it.
A year and some later after the last post and I seem to be having this problem as well... I believe it was due to a bad flash at very low battery level which ended up in encryption failure ya da da, factory reset, clear/format everything and flash custom rom from SD because any other connection would not work.... then managed to get windows (many flavors inc. 7, 8 and 10) to connect as MTP or in USB debugging mode but Odin mode (download) just won't do anything... i put the phone in DL mode, nothing happens, no windows connection sounds, no changes in devices manager, even when searching for new hardware. I'd be very interested to know if anyone has had anything like that. I'd really like to flash stock to go back to a custom rom, flash twrp to replace cwm but all seems to no avail if i can't get a connection while in DL mode.
tried to install adb fastboot but also nada since no connection is being made.... might be something with DL mode gone awry with the bad flash... long story but OTA update from current ROM decided on its own to push update even though battery was at 5% and no user interaction ever happened...
we'll see what happens...
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Are you using the original Samsung USB cable when the phone is in download mode?
romeeoo said:
after replacing mainboard of my s3 gt-i9300 my computer doesn't recognize phone at all in download mode but in while phone is on
mtp works fine via usb
please help
Click to expand...
Click to collapse
Driver issue. Find the correct drivers.
Beamed in by telepathy.
Hi!
I have trouble with my S5830i. I bought broken phone who has bootlop at the first screen with logo of samsung and name of phone.
Xrecovery and Download Mode is working but my PC do'nt recognize it. Windows shows samsung like "Unknown Device", i tried every avaiable firmwares, kies, but still doesn't work. I think that problem is with bootloader but I don't know how to fix it?
After launching Xrecovery shows this text:
-- Appling Multi-CSC --
E: failed to mount /system (Invalid argument)
E: failed to mount /system (Invalid argument)
E: failed to mount /cache (Invalid argument)
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: failed to mount /cache (Invalid argument)
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Click to expand...
Click to collapse
Thanks for helping
kazikus95 said:
Hi!
I have trouble with my S5830i. I bought broken phone who has bootlop at the first screen with logo of samsung and name of phone.
Xrecovery and Download Mode is working but my PC do'nt recognize it. Windows shows samsung like "Unknown Device", i tried every avaiable firmwares, kies, but still doesn't work. I think that problem is with bootloader but I don't know how to fix it?
After launching Xrecovery shows this text:
Thanks for helping
Click to expand...
Click to collapse
Check the drivers. make sure you have a good usb cable. sometimes when you are using usb cable other than samsung, the phone is not recognised.
adisawant said:
Check the drivers. make sure you have a good usb cable. sometimes when you are using usb cable other than samsung, the phone is not recognised.
Click to expand...
Click to collapse
I checked drivers for hundret times and i'm using samsung usb cable :/
Has maybe anyone another ideas?
Try choose another kernel*zip, Its can fix the problem !
I tried to do that. But after flash CWM and the kernel.img.zip and reboot I can't use buttons to control CWM(volume up and down), buttons are working correctly it's something with CWM...
Is now any sollutions to back to the stock recovery or fix CWM v5.0.2.6 without using PC?
kazikus95 said:
Hi!
I have trouble with my S5830i. I bought broken phone who has bootlop at the first screen with logo of samsung and name of phone.
Xrecovery and Download Mode is working but my PC do'nt recognize it. Windows shows samsung like "Unknown Device", i tried every avaiable firmwares, kies, but still doesn't work. I think that problem is with bootloader but I don't know how to fix it?
After launching Xrecovery shows this text:
Thanks for helping
Click to expand...
Click to collapse
try flashing stock firmware with re-partion option enabled.. :good:
shlnarang said:
try flashing stock firmware with re-partion option enabled.. :good:
Click to expand...
Click to collapse
ehh... but my problem is that Odin don't recognize the phone :/
kazikus95 said:
ehh... but my problem is that Odin don't recognize the phone :/
Click to expand...
Click to collapse
First Delete all preinstall drivers and then connect your phone to PC let wait some time your PC will recognize it Automaticaly then take down your phone into recovery Mode do wipe data/cache then take down into download mode and connect it to PC then Flash the Stock ..
Hope these helps
you using win 8 or something?
I flash new kernel with CWM and it helps with "cant mount..." messages, they dissapear and i could flash roms and others zip.
But i flash a new ROM and when i restarted phone its stuck on samsung logo and i can't go to recovery/CWM, the Download mode is working.
I tried to use USBJIG but when i'm using this it turning on phone normally and i have samsung screen, not Download Mode with reset informations.
I'm using win7
reset ports/usb devices
kazikus95 said:
I flash new kernel with CWM and it helps with "cant mount..." messages, they dissapear and i could flash roms and others zip.
But i flash a new ROM and when i restarted phone its stuck on samsung logo and i can't go to recovery/CWM, the Download mode is working.
I tried to use USBJIG but when i'm using this it turning on phone normally and i have samsung screen, not Download Mode with reset informations.
I'm using win7
Click to expand...
Click to collapse
had a simillar problem before with usb/ports
this helped follow this guide (remove spaces) and reboot and try again
digital .ni .com/ public.nsf/ allkb/ 1D120A90884C25AF862573A700602459
hope it helps you too :laugh:
kazikus95 said:
I flash new kernel with CWM and it helps with "cant mount..." messages, they dissapear and i could flash roms and others zip.
But i flash a new ROM and when i restarted phone its stuck on samsung logo and i can't go to recovery/CWM, the Download mode is working.
I tried to use USBJIG but when i'm using this it turning on phone normally and i have samsung screen, not Download Mode with reset informations.
I'm using win7
Click to expand...
Click to collapse
Flash stock firmware from odin..
First install usb driver to u r pc
Sent from my GT-S5830i using Tapatalk 2
ehh.. Can you read the topic when replying?
My problem is that PC don't recognize my phone and it's not firmwares fault.
kazikus95 said:
ehh.. Can you read the topic when replying?
My problem is that PC don't recognize my phone and it's not firmwares fault.
Click to expand...
Click to collapse
Then try from another PC
Sent from my GT-S5830i using Tapatalk 2
Did it work ?
kazikus95 said:
ehh.. Can you read the topic when replying?
My problem is that PC don't recognize my phone and it's not firmwares fault.
Click to expand...
Click to collapse
Did you reset all the usb devices and ports in link i gave you ?
or as @amolgosavi said try another pc
Hey guys.
I've tried to downgrade the flyme os version on my m3s with FlashFire and the procces got stuck in the middle.
The phone turned off and there is no sign of life coming from it.
There is no recovery mode, and no sound when connecting device via usb.
Now i'm trying to flash a new rom with Flash tool.
I've downloaded MediaTek drivers, and the phone get recognized only when pressing VOL- button and connecting usb.
After that proccedure the device is detected as "MediaTek USB Port", altough the tutorial saying it should be detected as "USB VCOM PORT".
img: i68.tinypic.com/2eyj9fo.pn
(Sorry for not embedding the pictures in the post, i'm still a newbie here so xda won't allow that for me.)
Flash tool is trying to download the rom's but i keep getting this error: "STATUS_BROM_CMD_FAIL"
img: i67.tinypic.com/2f08zgn.png
Googling that error already a half day. Tried all suggested solutions execpt removing the battery.
What do you about that guys?
Is there any chance of survival for me g2s?
s6n said:
Hey guys.
I've tried to downgrade the flyme os version on my m3s with FlashFire and the procces got stuck in the middle.
The phone turned off and there is no sign of life coming from it.
There is no recovery mode, and no sound when connecting device via usb.
Now i'm trying to flash a new rom with Flash tool.
I've downloaded MediaTek drivers, and the phone get recognized only when pressing VOL- button and connecting usb.
After that proccedure the device is detected as "MediaTek USB Port", altough the tutorial saying it should be detected as "USB VCOM PORT".
img: i68.tinypic.com/2eyj9fo.pn
(Sorry for not embedding the pictures in the post, i'm still a newbie here so xda won't allow that for me.)
Flash tool is trying to download the rom's but i keep getting this error: "STATUS_BROM_CMD_FAIL"
img: i67.tinypic.com/2f08zgn.png
Googling that error already a half day. Tried all suggested solutions execpt removing the battery.
What do you about that guys?
Is there any chance of survival for me g2s?
Click to expand...
Click to collapse
Your PC did not recognized your device because of improper driver installation try after flashing proper driver:-
-Here is the link of drivers of m3s install your required driver from this site:-
http://gsmusbdriver.com/meizu-m3s
Before installing this driver "disable driver signature verification" in your pc and then install this driver....ok...
Sent from my SM-A710F using Tapatalk
AshTechsoft said:
Your PC did not recognized your device because of improper driver installation try after flashing proper driver:-
-Here is the link of drivers of m3s install your required driver from this site:-
Before installing this driver "disable driver signature verification" in your pc and then install this driver....ok...
Sent from my SM-A710F using Tapatalk
Click to expand...
Click to collapse
I already did that, couple of times.
The device being detected only when pressing VOL- button and simultaneously connetcting USB.
All tutorials says that it should be detected without pressing any button - just connecting the phone with USB.
I Think that what cause the ERROR in flash tool.
Hello, my friend wanted Android 5.0 on his device (Samsung Core 2). He installed it from the SD card and got an error saying: "Application Installer has stopped working". And there is an option Okay. If I press it it just gives me the same error and behind the error message is only a black screen. He can't use his phone at all. He doesn't know much about android phones, computers and technology in general. He asked me if I could fix it. Now I know that I have to install a stock ROM (4.2.2) on the device. I downloaded ODIN and the Stock firmware for the device. Extracted both ODIN and Stock Firmware. Now the problem is when I try plugging the device in my PC. My PC doesn't recognize the device. So I downloaded Samsung USB drivers from "developer. samsung. com/galaxy/others/android-usb-driver-for-windows" . I installed them restarted my PC and I still get the error message. If I put my phone to download mode it won't even start recognizing the device. If I turn off my device and plug it in (starts charging the device) and I get an message that the drivers are being installed and then it says Drivers failed to install device failed to connect. Is there anyway I can make my device recognizable. I can't flash stock ROM because I don't have an SD card reader. Is there any method that I could use or just something I could do to install stock ROM and get this device to work.
Thank you in advance.