Hello, sorry for my english , during the flash of the I9100G i have this error:
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The operation during 10 sec. I've tried most rom, but nothing! , help me please!
EDIT: I alredy tried the deep clean...
What was the firmware you were trying to flash?
Things to consider:
1. Make sure its the G version firmware
2. Maybe a bad download. Try downloading it again. Also verify the md5 sum.
Sent from my GT-I9100 using Tapatalk 2
Harsha Raj said:
What was the firmware you were trying to flash?
Things to consider:
1. Make sure its the G version firmware
2. Maybe a bad download. Try downloading it again. Also verify the md5 sum.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I used this firmware: I9100GXXLB1_I9100GATOKL1_I9100GXXKL4_HOME.tar.md5 , the download is ok, because yesterday the flash is ok! , I flashed another firmware but for this firmware isn't work the Root permission! , i flashed this: I9100XILA2_I9100OXIKK1_ITV (I9100XILA2_I9100XWKI1_I9100OXIKK1_HOME.tar.md5) and present the problem with freset ecc... with any firmware!
imyourpapi said:
I used this firmware: I9100GXXLB1_I9100GATOKL1_I9100GXXKL4_HOME.tar.md5 , the download is ok, because yesterday the flash is ok! , I flashed another firmware but for this firmware isn't work the Root permission! , i flashed this: I9100XILA2_I9100OXIKK1_ITV (I9100XILA2_I9100XWKI1_I9100OXIKK1_HOME.tar.md5) and present the problem with freset ecc... with any firmware!
Click to expand...
Click to collapse
first try to flash a Stock kernel meant for I9100G, since the second firmware u tried to flashed(I9100XILA2_I9100XWKI1_I9100OXIKK1_HOME.tar.md5) was meant for I9100 ma8
after flashing the stock kernel meant for I9100G, try flashing a stockrom which is for I9100g and see
and u should be carefull wile selecting rom/kernel/modem for ur I9100g since it has a diff hardware compared to the I9100 and its variants M/P/T
Sun90 said:
first try to flash a Stock kernel meant for I9100G, since the second firmware u tried to flashed(I9100XILA2_I9100XWKI1_I9100OXIKK1_HOME.tar.md5) was meant for I9100 ma8
after flashing the stock kernel meant for I9100G, try flashing a stockrom which is for I9100g and see
and u should be carefull wile selecting rom/kernel/modem for ur I9100g since it has a diff hardware compared to the I9100 and its variants M/P/T
Click to expand...
Click to collapse
I've found this stock Kernel http://forum.xda-developers.com/showpost.php?p=24671864&postcount=8 , but i flashed the odin version, but the triangle yellow appare! And i've found this kernel + bootloader stock: http://forum.xda-developers.com/showpost.php?p=25773965&postcount=25 but the bootloader report fail! the kernel is ok, but the yellow triangle appear!
imyourpapi said:
I've found this stock Kernel http://forum.xda-developers.com/showpost.php?p=24671864&postcount=8 , but i flashed the odin version, but the triangle yellow appare! And i've found this kernel + bootloader stock: http://forum.xda-developers.com/showpost.php?p=25773965&postcount=25 but the bootloader report fail! the kernel is ok, but the yellow triangle appear!
Click to expand...
Click to collapse
that yellow triangle is OK ma8 u can remove it later, now try flashing the stock firmware meant for I9100G thro Odin and see
Sun90 said:
that yellow triangle is OK ma8 u can remove it later, now try flashing the stock firmware meant for I9100G thro Odin and see
Click to expand...
Click to collapse
Error i used this I9100GXXLB1_I9100GATOKL1_I9100GXXKL4_HOME.tar
imyourpapi said:
Error i used this I9100GXXLB1_I9100GATOKL1_I9100GXXKL4_HOME.tar
Click to expand...
Click to collapse
try with a diff USB port on ur PC and see
Sun90 said:
try with a diff USB port on ur PC and see
Click to expand...
Click to collapse
With another PC FAIL
imyourpapi said:
With another PC FAIL
Click to expand...
Click to collapse
check the link below hope it might be of some help to u
check under 'I9100G version' in the same.
http://forum.xda-developers.com/showthread.php?t=1457458
Sun90 said:
check the link below hope it might be of some help to u
check under 'I9100G version' in the same.
http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I alredy trying it But nothing , i use a gingerbread 2.3.6 europe, i flash the stock boot and kernel for i9100? In this thread is posted
Sorry for double post, but i SOLVED!!!!! i used this file: I9100GZCKH4_OZHKH4(www.mobims.ru).zip , google is your friend! i select pit,modem,pda,csc and re-partition, and work it!! The phone is working with Gingerbread Thanks for your help!
EDIT: OMG this version only Chinese! ahahahahah , Now the Stock rom Europe install at 99%
EDIT2: The secret is a correct pit file... , but format spl1 spl2 param etc... , now i search another version of gingerbread compatibile with Root
EDIT3: Solved, the next of 99% flash of european version, i used the "i9100g unbrick.tar" And this flash the cwm recovery, and the phone Will start up with european firmware
EDIT4: In this method i found 1 bug, Wi-fi is not working, i flashed a chinese version used in first, and change the language, now the wi-fi is working, i update the forum
EDIT5: The bug of wifi is only rom used by me, with a another rom flashed at 99% i flashed i9100g unbrick.tar from cwm wipe data factory reset, wipe cache, wipe dalvin cache the phone is perfect! Yeeea!
India Galaxy S2 soft brick while JB OTA firmware update. PLEASE HELP!!
Recently i got a notification for OTA firmware for my I9100G. I guess it was JB update. After the update phone refused to start, it went into boot loop. I am trying to flash the stock rom ICS for India (I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5) using Odin .
1. Initially I tried to flash custom ICS Kernel (SuperICS_i9100g_v1.0.2.tar) , then tried to wipe cache and wipe data/factory reset and wipe Dalvik cache. It says error mounting /sdcard/android.secure! .
2. After that I tried to flash the Stock firmware mentioned above after going into download mode but Odin fails every time after factoryfs.img or hidden.img
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Tried different stock firmwares and custom Kernels for GB,ICS and JB (all for G versions) , different USB ports, different ODIN versions too! Nothing helped
Also I disable Kies everytime while attempting to flash the firmware.
Phone is soft bricked.
Any help will be highly appreciated. Thanks in advance
Please do not create duplicate posts. Someone will answer you shortly.
"To err is human, to forgive is divine"
Sent from my SGS II
someone please help me!
Use this file
https://drive.google.com/open?id=0B5jyAyksEQ34cWF4YjlfMWlfNlU
---------- Post added at 03:27 PM ---------- Previous post was at 03:26 PM ----------
your problem will solve
Related
hello,,
i have a problem with my galaxy s3 GT-I9300
the problem is that i flashed MIUI and it worked perfectly .. after that restarted my device and it repeat restarting.
so i got to recovery mode and it failed to flash any zip file. and failed to wipe to factory reset and failed to wipe data.
i was on CWM touch 5.0.5 but someone here adviced me to flash Philez Touch and after that i couldn't access recovery anymore
i tried to flash from odin a stock rom
Code:
I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
and here is the result
Code:
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The Download screen says the following
Code:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: YES (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
Downloading..
this is all i have .. please help me
thanks in advance
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
sriram231092 said:
not SDS. probably some kinda loose connection of usb. happened to me many times! tried all the ports?
sent from GS3 running MOKEE CM10.1 NIGHTLY RC3
Click to expand...
Click to collapse
tried all ports.
killed all samsung kies processes.
the problem is that i flashed a recovery file and it works but when flashing any rom it stuck !!!
Same answer nand damaged take to a service centre .
jje
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
flashing
Code:
recovery-cwmtouch-6.0.3.2-GTI9300.tar
result to successful
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
JJEgan said:
Same answer nand damaged take to a service centre .
jje
Click to expand...
Click to collapse
ground-zero said:
Have you tried flashing with separate files and pit file ? This should rewrite your partitions. Such "more parted" can be found here on XDA or sammobile.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
can you please provide me the link
thanks
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
Follow the steps in this thread.
If boots, then good, if not, then try flashing an ICS firmware. Download from Sammobile.
eng.helewa said:
can you please provide me the link
thanks
Click to expand...
Click to collapse
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
I had a similar problem with my I9305, would die at 23% of system.img. Fixed by re-flashing using Heimdall - after that, Odin also works again. Apparently a bug in Odin.
(However, in my case, the problem was not caused by repartitioning, nor did I need a PIT file to fix it.)
Sent from my GT-I9305 using xda app-developers app
eng.helewa said:
hey guys
i have flashed a rom finally though odin .. but the device still restarting and can't reach recovery mode
The NAND stuck problem caused by improper pit file .. i changed my pit file and it worked.
but why it still restarting ?!
here is what i did: flashed
Code:
[B]The ROM:[/B] I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5
[B]The PIT FILE:[/B] M0_20120220.pit
Note that the rom wont flash without the pit file
Click to expand...
Click to collapse
Have you flashed a firmware with single CSC, modem, code files ? When you make a repartition this is necessary. And you can try an other Odin vetsion. I use permanently 1.84 or change to Heimdall.
Hope this works !
Sent from my GT-I9300 using xda premium
Hi guys, forgive me about my bad english but i'm not english....ok, let's start with my problem.
Today i want to clean my gs3 because i want to make it return to standard condition (i had a 4.2.2 rom). So i follow a guide of an italian android forum (yes i'm italian) to make a deep clean. The problem is now, when i try to flash a stock rom with odin. I put the phone in download mode (in the counter i have only 2), odin recognize it and i press start, but the process stop and says this
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
the nand write fail, i think. I've tried a lot of thing, such as change pc or change cable, but always the same error. At least i try with the pit procedure, but always the same error. I can only enter in download mode rigght now, and when i swich on the phone normally it says "firmware upgrade encoutered an issue, Plese select recovery mode in Kies and try again.
I try the way by kies, but it didn't recognise the phone.
Plese, help me, i'm desperate....
what phone model? what file
Glebun said:
what phone model? what file
Click to expand...
Click to collapse
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
trasposone said:
i have the gt-i9300 no brand and for the stock rom i use this I9300XXALE8_I9300OJVALE7_OJV
Click to expand...
Click to collapse
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
you can't bump your thread more than once every 24 hours, it's against the rules.
if you flashed a pit file, you need to send it to ser
trasposone said:
nobody can help me? this is a very big problem, i need my s3,please i'm desperate
Click to expand...
Click to collapse
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
slaphead20 said:
Seeing as your firmware is pre-sds fix, you may have a damaged nand, ....try both these.
Can you boot into stock recovery?
Can you boot into download mode?
Click to expand...
Click to collapse
As well as slappy's suggestion, also post what it says for 'product name' when in download mode (if you can boot into download mode)..
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.
Hey guys
Could need some quick assistanse getting CWM running.
I decided to get Omni KK running on my SGS2 i9100 to see if i can get a bit of fresh feeling to the old thingy.
I downloaded:
philz_touch_6.07.9-i9100.tar.md5
Boot the Phone into Download Mode.
Start Odin
Add the tar.md5 file to the PDA.
auto reboot and f.reset time is checked just as Philz thread says.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin seems to fail to flash the file and i seriusly got no clue what the issue could be.
The phone is rooted, runs busybox, i did the EFS backup through ADB. So everything seems to be working fine except this part.
And unfortantly i cant install the zip file through Android 3e recovery and twrp from app-store says that the SGS2 is not supported.
Seriusly need a quick fix for this lil n00b issue i cant figure out.
Why not Zip FIle?
Myrmid0n said:
Hey guys
Could need some quick assistanse getting CWM running.
I decided to get Omni KK running on my SGS2 i9100 to see if i can get a bit of fresh feeling to the old thingy.
I downloaded:
philz_touch_6.07.9-i9100.tar.md5
Boot the Phone into Download Mode.
Start Odin
Add the tar.md5 file to the PDA.
auto reboot and f.reset time is checked just as Philz thread says.
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin seems to fail to flash the file and i seriusly got no clue what the issue could be.
The phone is rooted, runs busybox, i did the EFS backup through ADB. So everything seems to be working fine except this part.
And unfortantly i cant install the zip file through Android 3e recovery and twrp from app-store says that the SGS2 is not supported.
Seriusly need a quick fix for this lil n00b issue i cant figure out.
Click to expand...
Click to collapse
\
Why cant you install through Zip File??
Search for the file on d-h.st and install it!!
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?[/QUOTE]
Myrmid0n said:
When trying to install the zip it gives an sideload error 7.
Also it says the file is for Gt-i9100, i9100, i9100g etc, you model is .
Just a "." Not my actual modelnumber which indeed is i9100.
Im running latest stock btw, if thats the issue here.
The url u mentioned.. anyone able to find the correct cwm neesws if i've chosen the wrong one ?
Click to expand...
Click to collapse
Remove the line which has assert in updater script and then try flashing
Sent from my GT-I9100 using Tapatalk 2
corruptionfreeindia said:
Remove the line which has assert in updater script and then try flashing
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Worked with Odin after i found a new cwm file.
An older version, but good nuff to be able to install KitKat.
galaxys2root.com/cwmtwrp-recovery/
Myrmid0n said:
Worked with Odin after i found a new cwm file.
An older version, but good nuff to be able to install KitKat.
galaxys2root.com/cwmtwrp-recovery/
Click to expand...
Click to collapse
Hmm.
Add solved to your thread then
Sent from my GT-I9100 using Tapatalk 2
same problem here ... i also got error like this ...
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Spacedementia87 said:
I am trying to fix my i9300 UK.
I Had it running just fine with Ultima ROM and TWRP with Googy kernel.
Then one day it suddenly would not boot. Just got stuck on the samsung boot logo. I could not even boot to recovery.
So I asked and got a very short answer that I should flash the stock rom. So I downloaded the stock rom for my phone from sammobile and tried to flash it with ODIN.
However, I just get a FAILED sign when I try. What can I do?
Click to expand...
Click to collapse
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
The i9300 is the international version. The us one is another depending on ur carrier.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah I know,
I made sure to download the correct file
Spacedementia87 said:
Yeah I know,
I made sure to download the correct file
Click to expand...
Click to collapse
Try running as an administrator if you have done that try Odin v 1.85.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
Yeah, I am running as admin.
I will try 1.85 now.
Thanks
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Spacedementia87 said:
When I use 1.85 I get:
Code:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> sboot.bin
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300 << also what does it say on your screen when you are in download mode.
tallman43 said:
Try running as an administrator if you have done that try Odin v 1.85.
Click to expand...
Click to collapse
JJEgan said:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
Click to expand...
Click to collapse
This the the file I am trying:
I9300XXEMD2
Should be ok. I am on three.
I have looked in the task manager and can't see any reference to Kies on there. I guess I could uninstall just in case.
What is very worrying now is that I just tried to flash again using ODIN 3.04 and it said I needed a .pit file to repartition. Re-partition is not checked so I don't know why it is asking for this.
tallman43 said:
Mmm! Couple of things you could try.. Try adb boot into recovery also try and flash PhilZ recovery with Odin look here and choose .tarmd5 version >> << also what does it say on your screen when you are in download mode.
Click to expand...
Click to collapse
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Spacedementia87 said:
what do you mean by adb boot into recovery?
I will try to flash that custom recovery now.
While in download mode it says:
ODIN MODE
PRODUCT NAME: i9300
CUSTOM BINARY DOWNLOAD: 4
CURRENT BINARY: Samsung Official
System Status: Custom
UPDATE: Trying to flash that PhilZ recovery says I have not included a PIT file again. This is bad isnt it?
Click to expand...
Click to collapse
Sorry Yes :crying: I think you need service damaged partition..
tallman43 said:
Sorry Yes :crying: I think you need service damaged partition..
Click to expand...
Click to collapse
How do I do that?
Spacedementia87 said:
How do I do that?
Click to expand...
Click to collapse
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
tallman43 said:
Warranty service center..
You can try what JJEgan suggested Quote:
Is Kies running .
Download a clean stock rom and try again ,
Reads as faulty download/ wrong firmware/ damaged nand .
But it's not looking good i'm afraid
Click to expand...
Click to collapse
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Spacedementia87 said:
Damn
I guess I will have to pay for the repair.
Is there no way to find the official pit file and flash that?
Click to expand...
Click to collapse
Yes search the forum .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
tallman43 said:
Well I was going to suggest that but most of the posts I have seen from people who try to do that ended up with hard bricked phones I have never tried that and to be honest would never like to try doing it...But it's your phone!! if you try search option top of page their are some threads somewhere with instructions and pit files to download. Good Luck
Click to expand...
Click to collapse
Well thanks for the help.
I think I will take it in to get it fixed. I had the screen die on me not so long ago and had to take it in for a replacement screen then, so this is a little frustrating.
Oh well
Thank you very much