Is OTA available in the latest version ?
ric.rug said:
Is OTA available in the latest version ?
Click to expand...
Click to collapse
why r u asking the same here ma8 while the issue has to be clarified in the CM10 thread.
and also do not create thread after thread for all ur issues, rather try updating the same in one
Related
quick answer yes or no ?
quattro_rs said:
quick answer yes or no ?
Click to expand...
Click to collapse
NO. if you update to latest oficial htc rom, it will also update ur hboot. u will have problems later on. there is a thread on it.
better update with the latest modaco rom which is based on the latest official htc rom
I startet the update one min ago, rebooted and cwm then canceld it saying that the signature was incorrect so it abortet the update..
what to do now ?
What update by what method what file .
Strange to update via CWM .
jje
Did u flash the cwm and what file are u trying to flash(zip, tar, rom or kernel)
I did not do anything via cwm...
I went down to my phone and checked if theres and update avaliable,
it found one and downloaded it and rebooted in order to install it and after the phone was off it opened the packet and startet installing and all of a sudden i landed in cwm saying the packets signature was invalid...
thats what happened
OTA does not work with CWM. There are work-arounds but it's recommended to stay with Kies or Odin to flash new versions.
d4fseeker said:
OTA does not work with CWM. There are work-arounds but it's recommended to stay with Kies or Odin to flash new versions.
Click to expand...
Click to collapse
lol thats a minus for cwm imo... meh... does anybody have a link to a thread providing the latest release ?
whisch one is it btw ? 4.1 jelly bean ?
Here are most of the available firmwares:
http://www.samfirmware.com/
Jellybean isn't out for a couple of months, so it's a bugfix/enhancement release of ICS.
lol thats a minus for cwm imo
Click to expand...
Click to collapse
CWM is not designed for Samsung but for Android phones in general. So it cannot support all of the quirks and specialitys of all devices.
Latest CWM and root from dev section is supposed to allow updates OTA.but of course you need to reroot .
Simpler to join XDA and flash stock roms rather than try to mix and match .
jje
JJEgan said:
Latest CWM and root from dev section is supposed to allow updates OTA.but of course you need to reroot .
Simpler to join XDA and flash stock roms rather than try to mix and match .
jje
Click to expand...
Click to collapse
yeah, i did so before with my sgs + i already have odin and stuff required for flashing did all before, i would rather flash entire roms than mixng stuff...
so i think i will just wait then till the entire rom gets released.. :>
Yeah, wait for full(rom) update. lfb is latest firmware.lg1 is the the same rom just different modem
d4fseeker said:
Here are most of the available firmwares:
http://www.samfirmware.com/
Jellybean isn't out for a couple of months, so it's a bugfix/enhancement release of ICS.
CWM is not designed for Samsung but for Android phones in general. So it cannot support all of the quirks and specialitys of all devices.
Click to expand...
Click to collapse
yo d4f,
are there any version avaliable with the current patch or the patch itself as a single package ? ti flash via cwm or odin ?
are there any version avaliable with the current patch or the patch itself as a single package ?
Click to expand...
Click to collapse
I don't know what you mean by 'patch'. If you mean ROM version, then yes... flash the one you like. OTA partial updates are not available.
ti flash via cwm or odin ?
Click to expand...
Click to collapse
Samfirmware is Odin-only since they are full-Stock firmwares.
hello guys.. im using GB 2.3.6 with CF-Root..
i want to upgrade to CM 9.1.0..
anyone can give me a link for the flash CM 9.1.0 good guide for my SGS2 so i wont brick it?
and if i use CM, can i use Kies Air?
tonywei92 said:
hello guys.. im using GB 2.3.6 with CF-Root..
i want to upgrade to CM 9.1.0..
anyone can give me a link for the flash CM 9.1.0 good guide for my SGS2 so i wont brick it?
and if i use CM, can i use Kies Air?
Click to expand...
Click to collapse
if u have a rooted phone, then simply fallow the instruction in the OP of the CM 9.1.0 thread to install the same
and as for 'Kies connection' , No u cannot connect to kies with a custom rom, since it recognises on Stock samsung Firmware
tonywei92 said:
hello guys.. im using GB 2.3.6 with CF-Root..
i want to upgrade to CM 9.1.0..
anyone can give me a link for the flash CM 9.1.0 good guide for my SGS2 so i wont brick it?
and if i use CM, can i use Kies Air?
Click to expand...
Click to collapse
Sun90 said:
if u have a rooted phone, then simply fallow the instruction in the OP of the CM 9.1.0 thread to install the same
and as for 'Kies connection' , No u cannot connect to kies with a custom rom, since it recognises on Stock samsung Firmware
Click to expand...
Click to collapse
which S2 have you? the I9100G one or else...? depending on it the instruction/ROM to install are not the same...
Sun90 said:
if u have a rooted phone, then simply fallow the instruction in the OP of the CM 9.1.0 thread to install the same
and as for 'Kies connection' , No u cannot connect to kies with a custom rom, since it recognises on Stock samsung Firmware
Click to expand...
Click to collapse
oh well..thank you
tempofestival said:
which S2 have you? the I9100G one or else...? depending on it the instruction/ROM to install are not the same...
Click to expand...
Click to collapse
im using official samsung GT-I9100..
tonywei92 said:
can u give me the link to the thread please?
im using official samsung GT-I9100..
Click to expand...
Click to collapse
here u go link below
http://forum.xda-developers.com/showthread.php?t=1419102
hello
i have rooted galaxy S2, I9100 with CWM by Philz, the current firmware is the official 4.1.2
the question is : can i install cyanogen 10.1.3 on my 4.1.2 official firmware ??
because how can release 10.1.3 for 4.2.2 and in fact the last official firmware is 4.1.2
iam confusing !
what i need ?
alaa2003 said:
hello
i have rooted galaxy S2, I9100 with CWM by Philz, the current firmware is the official 4.1.2
the question is : can i install cyanogen 10.1.3 on my 4.1.2 official firmware ??
because how can release 10.1.3 for 4.2.2 and in fact the last official firmware is 4.1.2
iam confusing !
what i need ?
Click to expand...
Click to collapse
dont worry about those mate
Cm 10.1.3 will work just fine
No confusions on the android versions
Be sure that u flash the stable build of cm 10.1.3
Gud luck and dont forget to do a nandroid backup
thx for reply
machokingjim said:
dont worry about those mate
Cm 10.1.3 will work just fine
No confusions on the android versions
Be sure that u flash the stable build of cm 10.1.3
Gud luck and dont forget to do a nandroid backup
Click to expand...
Click to collapse
iam afraid after read bellow links because i think they put compatible versions in table view
forum.cyanogenmod.com/topic/74512-where-is-my-google-account-stuff-why-does-play-store-crash/%22%5DWhere
table:
goo.im/gapps
wiki.rootzwiki.com/Google_Apps
advice me
alaa2003 said:
iam afraid after read bellow links because i think they put compatible versions in table view
forum.cyanogenmod.com/topic/74512-where-is-my-google-account-stuff-why-does-play-store-crash/%22%5DWhere
table:
goo.im/gapps
wiki.rootzwiki.com/Google_Apps
advice me
Click to expand...
Click to collapse
choose the gapps package that is compatible with the cm10.1.3 which is the gapps file dated 20130812 and flash it once after you have flashed the rom
Hope i helped
re
machokingjim said:
choose the gapps package that is compatible with the cm10.1.3 which is the gapps file dated 20130812 and flash it once after you have flashed the rom
Hope i helped
Click to expand...
Click to collapse
yep very good
the point which make me conflict is installing CM 10.1.3 on official firmware 4.1.2 ( as table i sent you from CM official site it shows firmware 4.2.2 beside CM 10.1.x) because CyanogenMod not change firmware number i think
could you please clear this for me
alaa2003 said:
yep very good
the point which make me conflict is installing CM 10.1.3 on official firmware 4.1.2 ( as table i sent you from CM official site it shows firmware 4.2.2 beside CM 10.1.x) because CyanogenMod not change firmware number i think
could you please clear this for me
Click to expand...
Click to collapse
u need not worry about those version and firmware details
The statement in those cm sites are about installing the correct gapps package for the correct version of cm
It has nothing to do with incompatibility of latest version for our phones
Be rest assured i run android 4.3.1 in my gs2 gt i9100
---------- Post added at 01:00 AM ---------- Previous post was at 12:56 AM ----------
alaa2003 said:
yep very good
the point which make me conflict is installing CM 10.1.3 on official firmware 4.1.2 ( as table i sent you from CM official site it shows firmware 4.2.2 beside CM 10.1.x) because CyanogenMod not change firmware number i think
could you please clear this for me
Click to expand...
Click to collapse
if you are rooted and know the procedures of rooting, dont be confused and flash cm 10.1.3
You will love it
reply
heheh iam sorry for not press (thanks button) i did laisk eye operation since month
1- this means i can install CM 10.2 direct from recovery mode ( my device is rooted CWM by philz) ??
2- what is the room you are using as you say your android is 4.3.1 ?? :cyclops: ( your device is I9100 or I9100g)
alaa2003 said:
heheh iam sorry for not press (thanks button) i did laisk eye operation since month
1- this means i can install CM 10.2 direct from recovery mode ( my device is rooted CWM by philz) ??
2- what is the room you are using as you say your android is 4.3.1 ?? :cyclops: ( your device is I9100 or I9100g)
Click to expand...
Click to collapse
HI buddy .. U are confusing just the numbers .. actually CM 10x are variant of Jelly beans .. your firmware is official samsung jelly beans for S2 (4.1.2) .. yeah U can install CM 10x through recovery .. just make sure .. u know ..what U are doing .. I mean the proper guide to tackle these things .. nd One thing .. U CANNOT install CM over ur original firmware .. but u will install CM in PLACE of ur original firmware ..
alaa2003 said:
heheh iam sorry for not press (thanks button) i did laisk eye operation since month
1- this means i can install CM 10.2 direct from recovery mode ( my device is rooted CWM by philz) ??
2- what is the room you are using as you say your android is 4.3.1 ?? :cyclops: ( your device is I9100 or I9100g)
Click to expand...
Click to collapse
yes u can directly flash cm through recovery if you are rooted and have a recovery installed
I am running cm10.2 which is the android version 4.3.1
Probably will get the latest 4.4 kitkat soon
Trust me mate u can flash the rom you asked for without worries
thx
machokingjim said:
yes u can directly flash cm through recovery if you are rooted and have a recovery installed
I am running cm10.2 which is the android version 4.3.1
Probably will get the latest 4.4 kitkat soon
Trust me mate u can flash the rom you asked for without worries
Click to expand...
Click to collapse
thanks alot dear
its working perfect now
thanks alot for help
also i can use CM updates over OTA lol
alaa2003 said:
thanks alot dear
its working perfect now
thanks alot for help
also i can use CM updates over OTA lol
Click to expand...
Click to collapse
Anytime mate
alaa2003 said:
hello
i have rooted galaxy S2, I9100 with CWM by Philz, the current firmware is the official 4.1.2
the question is : can i install cyanogen 10.1.3 on my 4.1.2 official firmware ??
because how can release 10.1.3 for 4.2.2 and in fact the last official firmware is 4.1.2
iam confusing !
what i need ?
Click to expand...
Click to collapse
OP, how did you get your phone rooted with Philz kernel? I remember flashing its tar file, but it didn't give me suoeruser
Sent from my GT-I9100 using XDA Premium 4 mobile app
i want a proper guide to install system updates to rooted system...
there is nothing accurate guide in xda ?
all has issues with it
plz any expert who may helpme
coz stock is best.
You can find the official guide from the magisk dev here
garylawwd said:
You can find the official guide from the magisk dev here
Click to expand...
Click to collapse
Don't bother, he just spams every thread with the same questions about root/ota update and never follows any of the given advice.
garylawwd said:
You can find the official guide from the magisk dev here
Click to expand...
Click to collapse
Thanks but i had tried this process long ago for an update fails ?
Thats y i made a post..
Need a proper guide without flashing anything.
Every time i had to flash stock rom again n then install updates
garylawwd said:
You can find the official guide from the magisk dev here
Click to expand...
Click to collapse
NOTE: Install to Inactive Slot is disabled in newer builds of Magisk Manager due to changes that Google introduced to the OTA
Now what can we do
Sami Devo said:
NOTE: Install to Inactive Slot is disabled in newer builds of Magisk Manager due to changes that Google introduced to the OTA
Now what can we do
Click to expand...
Click to collapse
Not for the stable branch of magisk. V20.4 should still have that feature if I remember correctly.