Was pushed in the pool with phone in my pocket. Was under water for max 20 seconds. Phone screen flickered and powered down. Immediately removed cover, battery and dried. Was then left in uncooked rice overnight. Battery charges, however when I go to turn the phone on its stuck on the word DROID in white. I tried to hold volume + - and Power to restart and recover but nothing seems to work. I am not a Android expert or developer, but competent enough to follow direction.
Researched problem online, downloaded latest Verizon ICS ROM, Android-SDK, ADB and RDSLite5.6. However when I select AP Fastboot and connect phone to computer with ABD running, I am not seeing the device in RDSLite. Also device is not detected in ADB.
Any help would be really appreciated, I just got this phone a week ago as a replacement.
Try mattlgroff's RAZR utility to fast boot the stock .211 software. Less room for operator error than the adb method.
Sent from my XT912 using Tapatalk 2
asgasg said:
Was pushed in the pool with phone in my pocket. Was under water for max 20 seconds. Phone screen flickered and powered down. Immediately removed cover, battery and dried. Was then left in uncooked rice overnight. Battery charges, however when I go to turn the phone on its stuck on the word DROID in white. I tried to hold volume + - and Power to restart and recover but nothing seems to work. I am not a Android expert or developer, but competent enough to follow direction.
Researched problem online, downloaded latest Verizon ICS ROM, Android-SDK, ADB and RDSLite5.6. However when I select AP Fastboot and connect phone to computer with ABD running, I am not seeing the device in RDSLite. Also device is not detected in ADB.
Any help would be really appreciated, I just got this phone a week ago as a replacement.
Click to expand...
Click to collapse
You can't totally dry it with rice. You can just take out moisture. When water dries it leaves traces that still make short circuit. I had my razr dropped in the sea and couldn't do nothing for day's until I came home. What you have to do is dismantle your phone and dip it in 98% alcohol, but first protect your microphones with some strong adhesive tape ( wrap them good), if you can acquire the one used for phone because its strong and it wont let alcohol through to damage them. For the best results use ultrasonic tank filled with 96 or 98% alcohol or other solution for electronics. I used 96% alcohol. Only damage I got on my phone is a broken ear speaker from sea water witch can be replaced. Everything else works.
Oops
Full-Throttle Team
moderator at bdhroms.freeforums.org
Darezi said:
You can't totally dry it with rice. You can just take out moisture. When water dries it leaves traces that still make short circuit. I had my razr dropped in the sea and couldn't do nothing for day's until I came home. What you have to do is dismantle your phone and dip it in 98% alcohol, but first protect your microphones with some strong adhesive tape ( wrap them good), if you can acquire the one used for phone because its strong and it wont let alcohol through to damage them. For the best results use ultrasonic tank filled with 96 or 98% alcohol or other solution for electronics. I used 96% alcohol. Only damage I got on my phone is a broken ear speaker from sea water witch can be replaced. Everything else works.
Click to expand...
Click to collapse
This. Leave it in a non cold place for as long as you can. It should evaporate pretty quickly, but still would rather err on the side of safety. At least it sounds like it's not completely trashed.
You can leave it as long as you want to dry, but there will always be water residues that still conduct electricity, That is what you have to clean. The longer you use your phone like this the more damage will be made which some can't be repaired later on. Better be safe than sorry. Clean it like I wrote it and you will be ok.
Related
It doesn't work, won't turn on, take out battery and plugged into charger it doesn't turn on.
I'm assuming I need a disassembly guide (looked for and couldn't find) and how to figure out what's broken and where to find parts. btw I live in Australia.
Any help is appreciated.
Thank you
There is a fix rule when electrical devices come in contact with water, you don't try to power them on and you don't try to charge them!!
The best you could do is to open the phone and let it dry out! leave it drying for days!
I suppose you could use a hair dryer...
If you are lucky it will work..if not you've probaly short circuited it...
btw, here's your guide: http://www.youtube.com/watch?v=iyT618lVxUs
Hanzo.Hasashi said:
There is a fix rule when electrical devices come in contact with water, you don't try to power them on and you don't try to charge them!!
The best you could do is to open the phone and let it dry out! leave it drying for days!
I suppose you could use a hair dryer...
If you are lucky it will work..if not you've probaly short circuited it...
btw, here's your guide: http://www.youtube.com/watch?v=iyT618lVxUs
Click to expand...
Click to collapse
never ever use a hairdryer!
just put it it down somewhere turn i around every 30 min this way it will not cause any corrosion but yeah when you sleep you cant turn itaround so before you go to bed and then after but keep the water moving it is better!
it sounds not better but it is!
like the guy above me said dont turn it on don't try to charge it
and try it over around 4-7 days
and ofc cross your fingers and pray
let us know how it goes
Fill a cup with Isopropanol Alcohol, and drop the phone in.
Seal the lid.
Leave somewhere for a could hours, shaking around a little every so often to get the fluid into every nook and cranny.
Remove phone and shake out fluid. Leave sitting wrapped in a towel in a warm place (airing cupboard etc) but nowhere too hot.
That SHOULD get all the water out, however you probably already destoyed it by plugging it in.
Put in a jar filled with raw rice or a container containing semi-powdered quicklime it will ofc absorb water and let it dry for 4-5 days and try charging or turning it on...hope my reply ain't too late
Sent from my U20i using XDA Premium App
Save Into Rice
Strange but true, you should have DIRECTLY put it in raw rice.
That will absorb the water greatly.
Put ur phone out of water. Dont turn on ur phone. Put ur device in some place by about 1 day and dont touch it!... then try again.
Rice is the answer! It sucks all the water away in a week... although i would leave it 2, just to be 100% sure
Sent from my X10mini
Sorry guys this happened like a week or two ago now. Took the battery out asap, left it for two days, hair dried it and then tried and it didn't work. I plugged it into the charger to see if it was just the battery that's ****ed, apparently just the battery is dead.
It was in a pool, so chlorine could have corroded some parts? Could I try to clean off the corrosion, replace parts etc. Or would it be cheaper to send to sony ericsson and get them to fix it?
Sony will just replace the whole phone and charge you a repair fee iirc.
Isopropanol may help with corrosion, but you need to strip the phone down to bare boards and parts, and soak it in the alcohol, then brush at with a SOFT toothbrush and gentle motions.
Isopropanol dries fast and leaves no residue, so it's ideal for loosening gunk and driving out water. I've used it with great success to salvage laptops filled with everything from cola to beer as well as waterlogged wristwatches.
dancm91 said:
Sorry guys this happened like a week or two ago now. Took the battery out asap, left it for two days, hair dried it and then tried and it didn't work. I plugged it into the charger to see if it was just the battery that's ****ed, apparently just the battery is dead.
It was in a pool, so chlorine could have corroded some parts? Could I try to clean off the corrosion, replace parts etc. Or would it be cheaper to send to sony ericsson and get them to fix it?
Click to expand...
Click to collapse
few days ago my mini pro also dripped into water i instantly removed battery
so may be damage not done to much but after that i removed water by wiping with cloth & than place it near hot air remover heater
after that i opened it thoroughly each & every part & u know water is in each & every part so i opened whole phone screen main board camera keyboard etc. & than i used hair dryer to remove water from every part of phone don't place all parts too much close to the phone or don't use hair drier for too long continuously but u can easily able to know that part is dried or not
after that in main board also u can dry it with hair dryer after u can convinced that there is no water particles remain in phone lets switch on it
after this all i done i start my phone successfully with all features working after 2 hours
& now just my keyboard lights are not working, they are working but only for 2 seconds so i have no prob with that however i give it to service center to short it out but yes this is the only solution u can get your phone working!!
if u want some help ask me
Sideromelane said:
Fill a cup with Isopropanol Alcohol, and drop the phone in.
Seal the lid.
Leave somewhere for a could hours, shaking around a little every so often to get the fluid into every nook and cranny.
Remove phone and shake out fluid. Leave sitting wrapped in a towel in a warm place (airing cupboard etc) but nowhere too hot.
That SHOULD get all the water out, however you probably already destoyed it by plugging it in.
Click to expand...
Click to collapse
This is the best solution but since its been a while now it probably wont work, and also because your already tried charging it and turning it on. Personally i would send it to say and get then to fix, but it may even be cheaper to buy a new device as basic warrenty will not cover water damage.
Cheers,
evilbarcode.
I am pretty sure this is a warranty claim but I wanted to run it by the community. Excuse any poor typing I'm literally on a mountain right now.
I think some moisture got into the bottom port. My s2 always thinks it's plugged into a computer. I get samsung kies connection prompts when I get into the os and battery usage tracker shows the phone as charging when I look at usage with wild spikes up and down. Can't toggle USB dev mode because it always tells me to remove USB cable. Luckily I got a tibackup just a few days ago that I offloaded to my memory card.
When I power it down I immediately get the green battery showing it's charging. In a few seconds it starts flashing between that and a battery with a temperature gauge and a exclaimation point.
Only way to get her to turn on is by plugging into a power source and holding down power.
Did a factory reset same problem. Won't be able to reset the kernel till I get home in 10 days.
Any ideas or straight back to phones 4 u warranty claim? If water damage then insurance claim ( loved my baby. Thanks
mate please in case you returned it tell me if they accepted it. I have the SAME problem :|. please tell.
Get some rubbing alcohol solution (Isopropyl alcohol) from your local pharmacy.
Pour it into a bowl.
Remove the battery cover.
Remove the battery.
Dip your phone into the bowl, and swirl it around.
Place on an air conditioner to have the alcohol and water sucked out from the dehydrated cool air conditioned air for overnight. If it is winter, put near the heater which also has dehydrated warm air.
Place battery into phone.
Turn phone on.
See if you have the problem again.
No, I am not joking.
http://en.wikipedia.org/wiki/Isopropyl_alcohol
I'm having this same exact issue - I've even had my phone unplugged for about 2 hours, yet when I go to battery status, it says it's only been on battery for 2 seconds... how did your warranty replacement go?
There was somebody on a Dutch forum who has the same problem.
His phone was wet.
And if it is water damage, i hope for you that you have warranty and dont have big water problems ...
netchip said:
There was somebody on a Dutch forum who has the same problem.
His phone was wet.
And if it is water damage, i hope for you that you have warranty and dont have big water problems ...
Click to expand...
Click to collapse
had it sealed in a ziplock bag, so no outside water got in - perhaps it got too hot in the bag or there was moisture in the bag when it was sealed? (I should've put in some silica gel or something..)
Hello,
Sorry for going MIA.
Basically I returned this to phones4u, sent it in, and they processed a warranty replacement. They didnt say anything luckily about water damage but I think its because on a rainy day some water got into the bottom. From what I could tell they cleaned up the connector at the bottom with alcohol or something - it was spic and span when i got it back and the phone worked ok.
Side note, I recieved it and saw they scrached up my phone pretty good so i complained and sent it in a second time. Recieved it and the scratches were gone, but to do this they did a new screen replacement.
THe new screen had a bright red stuck pixel. I thought I could live with it but it drove me nuts as my original screen was perfect. So i went back to phones 4 u and sent it in a third time, this time they're saying they will just give me a swap. So although the problem was fixed a mess ensued and now i'm sitting around waiting for my "swap" and next surprises with dealing with them.
THey have been ok though I'm almost sure there is water damage on that phone but they dont seem to have picked up on it, i hope i can get it swapped and then dont have to worry about water damage again.
Cheers.
Good morning everyone. This morning was not a good morning for me, as I was feeding and watering my dog my phone slipped out of my jacket pocket and dropped into the dogs water bowl. It was in the water for less than a second, initially everything seemed fine there was barely any water behind the battery cover so I dried all that out and shook the phone to make sure there was no water in it's ports. Then shortly after that its USB port started going wonky(started acting like I was connecting USB cable and disconnecting it over and over), and my touch buttons at bottom of screen seem to stop working which makes doing anything damn near impossible. The USB plug seems to work as I've got it plugged up and its charging fine, but now my PC says USB unrecognized device. What I want to know is will these things work themselves out, is there something I can do to help them, or am I screwed?
Thanks for helping.
madhatter79 said:
Good morning everyone. This morning was not a good morning for me, as I was feeding and watering my dog my phone slipped out of my jacket pocket and dropped into the dogs water bowl. It was in the water for less than a second, initially everything seemed fine there was barely any water behind the battery cover so I dried all that out and shook the phone to make sure there was no water in it's ports. Then shortly after that its USB port started going wonky(started acting like I was connecting USB cable and disconnecting it over and over), and my touch buttons at bottom of screen seem to stop working which makes doing anything damn near impossible. The USB plug seems to work as I've got it plugged up and its charging fine, but now my PC says USB unrecognized device. What I want to know is will these things work themselves out, is there something I can do to help them, or am I screwed?
Thanks for helping.
Click to expand...
Click to collapse
It is more then likely ruined. When ever a phone gets wet you should immediately remove the battery and put the phone In A large bag of rice for 3 days. No less then 72 hours and you have a very good shot at being OK. For phones that have been completely submerged and are water logged I would do 3 days of rice and then a quick dip In rubbing alcohol and then another day of rice. The alcohol prevents corrosion on the electrical solder connections. I hope you have insurance. You can try the rice now but since you supplied voltage to a wet circuit the damage is done. O and when I say a quick dip in alcohol I mean remove the screen and only dip the circuit board.
sent from my Shostock Sgh-I777 running siyah!
Thanks for the reply, but I think I got lucky. My USB port has stopped acting up and I was actually able to see contents of my phone thru the pc. Also my buttons are working fine again maybe there was a slight bit of water crossing circuits and it finally dried up.
The best way to dry it up, if it ever happens again is to use uncooked rice. Put the phone (with the cover open and the everything pull out) in the container with the rice covering it. Depending on how wet it got, it might take a few days ( 2 - 4) for it to completely dried up.
Intub8 said:
It is more then likely ruined. When ever a phone gets wet you should immediately remove the battery and put the phone In A large bag of rice for 3 days. No less then 72 hours and you have a very good shot at being OK. For phones that have been completely submerged and are water logged I would do 3 days of rice and then a quick dip In rubbing alcohol and then another day of rice. The alcohol prevents corrosion on the electrical solder connections. I hope you have insurance. You can try the rice now but since you supplied voltage to a wet circuit the damage is done. O and when I say a quick dip in alcohol I mean remove the screen and only dip the circuit board.
sent from my Shostock Sgh-I777 running siyah!
Click to expand...
Click to collapse
BeenAndroidized said:
The best way to dry it up, if it ever happens again is to use uncooked rice. Put the phone (with the cover open and the everything pull out) in the container with the rice covering it. Depending on how wet it got, it might take a few days ( 2 - 4) for it to completely dried up.
Click to expand...
Click to collapse
Arent you also supposed to put it in the sun, so it heats up and evaporates the water from inside the phone and then the rice absorbs it... or is that old news and overkill?
Red5 said:
Arent you also supposed to put it in the sun, so it heats up and evaporates the water from inside the phone and then the rice absorbs it... or is that old news and overkill?
Click to expand...
Click to collapse
The sun only dry the outside part of the device. There will be moisure inside device (sometime) that will stay for a while. In order to get rid of the moisure from the inside of the device (if it is excessive water got in) is to use the rice.
In this case it might be excessive and overkill (since the device still works). But then I have mentioned that if next time. Sorry that I didn't indicated that if the device won't come on after sun drying, then use this method...
BeenAndroidized said:
The sun only dry the outside part of the device. There will be moisure inside device (sometime) that will stay for a while. In order to get rid of the moisure from the inside of the device (if it is excessive water got in) is to use the rice.
In this case it might be excessive and overkill (since the device still works). But then I have mentioned that if next time. Sorry that I didn't indicated that if the device won't come on after sun drying, then use this method...
Click to expand...
Click to collapse
I think you misunderstood him... he's not saying put the phone in the sun, he's saying put the bowl of rice with the phone in it in the sun. That supplies heat which facilitates the process of water evaporating. I wouldn't leave it in direct sunlight though, just in a warm place near a window maybe.
mine dropped in toilet
2 days in rice with small bag of desiccant inside of phone(take battery out)
desiccant will dry out faster
I'd use some Lysol after that one
Sent from my SGH-I777 using xda premium
When mine fell in a cup of water, I put it in a bowl of rice, and then put the bowl over a scentsy warmer. The small light bulb in the warmer gently heated the bowl, without getting it too hot.
Sent from my SAMSUNG-SGH-I777 using xda premium
I just had my phone "waterproofed" by a company last week, just in case. A friend of mine demonstrated the effectiveness on his iphone 4 and I instantly wanted to have it too as I use my phone as a GPS unit on my motorcycle. I live only a few minutes away and walked in to have it done. I can't attest to their shipping: http://www.liquipel.com/
JustinW3 said:
I think you misunderstood him... he's not saying put the phone in the sun, he's saying put the bowl of rice with the phone in it in the sun. That supplies heat which facilitates the process of water evaporating. I wouldn't leave it in direct sunlight though, just in a warm place near a window maybe.
Click to expand...
Click to collapse
Oops. I missed read it for sure. Sorry. LOL
Sent from my SAMSUNG-SGH-I777 using XDA
A few phones ago I tried the rice rescue method, but after a couple of days the rice caked up around the device and was a bother to try to chip away. Later, someone pointed out that I should not have cooked the rice.
I dropped plenty of phones in different liquids.
Nokia in a cup.of crown
Lg I'm the tub
Samsung in the washing machine this one was my i777
Samsung in the toilet
HTC in the toilet
and the rice trick had always worked for these expect for my bb curve. My daughter was slubbing all over it. it's Been a few months and it's still not working
Sent from my SGH-I777 using xda premium
Hey guys, I've been in love with my phone for the past two weeks. Now I'm on Vacay oversees. This phone is so damn light I didn't even realize they were in my swim trunks. Then boom it hit me 1 min later, phone in pocket and in the pool!!
Anyone with experience dropping it water or any advice regarding preventing further damage?
Bury it in a bowl of uncooked rice for a day or more. It will dry it out. There may be damage to the screen, or some contacts may be shorted, but this will help minimize damage. Also give it a few days to heal, some problems might go away as the last bits of water evaporate out.
sosobri said:
Hey guys, I've been in love with my phone for the past two weeks. Now I'm on Vacay oversees. This phone is so damn light I didn't even realize they were in my swim trunks. Then boom it hit me 1 min later, phone in pocket and in the pool!!
Anyone with experience dropping it water or any advice regarding preventing further damage?
Click to expand...
Click to collapse
Dont turn it on, put it in rice for 48+ hours.
During those 48 hours, pray.
Good luck!
Damp rid
Go to the hardware and get some damp rid. Place the phone in a small tupperware, place that in a larger tupperware with the damp rid in it and seal for a week. I have received 2 phones this way.
Take it apart and blowdry, that's the only way for sure, assuming you haven't tried to turn it on, good luck...
Sent from my EVO using xda premium
Put in a insurance claim and forget it.
Sent from my EVO using XDA
My OG 4G was submerged and I brought it back to life with no issues.
1. Like others have said do not turn the phone on
2. Do not blow dry the phone, if you have concerns with the contaminants in the pool water you CAN give the phone an alcohol wipe down. Alcohol evaporates quickly and can help to draw excess water out of small crevices while cleaning contacts, boards, etc
3. SETUP a drying chamber like others have recommended. Either using the rice
method or using a desiccant like Damp Rid. Put that in a shoe box along with
the phone and tightly seal it. 3 days minimum up to a full week. It took my
OG 5 days to come around.
That kind of rice works better, long grain, short grain, broken rice, Jasmine?
You need to take it apart and clean it NOW.
Pool water is highly clorinated. Chlorine is a corrosive.
Even drying it out or using rice will still damage the device. The water / chlorine are already in the device. Since its got a non removable battery the unit will still have power running to parts of it.
What needs to happen is
1, file a claim and replace it.
2. If you can get it apart. remove the battery and start to clean it with isopropoyl alchohol or contact cleaning solution.
But my guess is since it actually went underwater the LCD will have spots on it as well.
At this point its probably going to be a bad device.
easy way to turn it off, if on still, hold power for 10 sec, when in off state, hold vol down, boot into bootloader, select fastboot, select power down.
Don't use a blower that will accelerate the oxidation on the circuits.
Sent from my htc_jewel using Tapatalk 2
Thanks for the suggestions guys, I think I might have to say one good prayer in hopes of getting this device to work. Im in the Philippines so my phone doesn't have signal anyways I just mainly up use it as a wifi device, the real problem is when I get home. But if I do file a claim now maybe I'll have one waiting for me when I get back from vacation. Thanks for the help
Let the phone sit for a day or two, or until majority of the water evaporates naturally. (do not put in sun or apply direct heat, as it will make your screen fog and cause bubbles etc.) When majority of the water is out then take a blow dryer on cool or normal (not hot or warm) and apply to phone covering all areas for at least 30 mins. You need to take of the back plastic face plate as it is easy to remove and will easily hold water. If you can watch a video on how to access the batter (if you cant find one there are some for the One X line witch is very similar in build). If water is near the battery or any electrical circuits it could easily fry. If you are unsure if the water is not completely out of it you have either not waited long enough or applied enough air to the phone. Good Luck and Remember do not turn on wet electronics! THAT'S A NO-NO!!!
jr71x said:
Take it apart and blowdry, that's the only way for sure, assuming you haven't tried to turn it on, good luck...
Sent from my EVO using xda premium
Click to expand...
Click to collapse
+1
Blow dry as in a can of air. Not a blow dryer.
Don't forget a pool has chlorine in the water. It may even be worth rinsing. Then blow dry and then let it sit.
Take the rear cover off. Was gonna say remove the battery too, lol. But the sealed tupperware/bag of white rice works. Be patient as hard as that is.
water logged phone
I like the insurance claim option the best also, I suspect that if it comes around, it will never be the same again, and I would be concerned that one day, for no particular reason, it will simply stop working.
Get a new phone, and call it a day. These things happen dude
The key is to get it apart and get every bit of water out/dried, I guess I shoulda mentioned to watch aspects of things to not get hot, however a regular blow dryer on low or cool shouldn't hurt anything, it will be a delicate process. First things first though, get the battery out, do not try and turn it on. I've fixed thousands of microelectronic boards, traces, solder points, and water damage accounts for about 75% of most of what I've seen. If you aren't comfortable with this as most wouldn't be, find someone who is or try some kind of tep, tsp, whatever but it doesn't sound like that's an option... Good luck and follow up, I'd like to hear how it turns out...
Sent from my EVO using xda premium
Hi all,
Unfortunately, I've dropped my phone into the water and it sat there for 20 minutes or so. After that, I have disassembled it and left it in a container full of rice for 2 days.
Now, every time I try to do one of these:
1)Turn it on
2) Charge
3) plug it to my laptop
It shows the pocophone logo, then the empty battery logo for less than a second and the loop starts it all over again.
Please, any ideas on what can I try to do mitigate the problem? Thanks.
renatomarcos said:
Hi all,
Unfortunately, I've dropped my phone into the water and it sat there for 20 minutes or so. After that, I have disassembled it and left it in a container full of rice for 2 days.
Now, every time I try to do one of these:
1)Turn it on
2) Charge
3) plug it to my laptop
It shows the pocophone logo, then the empty battery logo for less than a second and the loop starts it all over again.
Please, any ideas on what can I try to mitigate the problem? Thanks.
Click to expand...
Click to collapse
You have locked bootloader?
jjgvv said:
You have locked bootloader?
Click to expand...
Click to collapse
Unlocked
renatomarcos said:
Unlocked
Click to expand...
Click to collapse
ummm can you get into fastboot?
volume down and power
Nope, holding volume down and power start the mentioned loop again
renatomarcos said:
Nope, holding volume down and power start the mentioned loop again
Click to expand...
Click to collapse
yr emmc died then replace motherboard.
battery and screen and back and possibly camera (if new motherboard does not include it) can probably keep.
Rice is useless. More than likely it's junk now.
You need to disassemble it and get out all the water. Water plus power equals corrosion.
Any corrosion can cause immediate failures or delayed ones even months, years latter. Connector contacts and power buses/components are particularly susceptible as well as some surface mount devices.
>Pull battery immediately!!!<
Disassemble as much as you are able to and pull all ribbon cable and other connectors.
Use anhydrous isopropyl alcohol* liberally if fresh water or RO water than isopropyl for salt water**.
Make sure the (water) alcohol gets into all switches and ribbon connector contacts.
Junk it but then get the alcohol off it fast.
Use compressed air to blow out the isopropyl alcohol as much as possible. It will take a few minutes, be careful with the air pressure.
Place in a warm dry place with fan on it until all water is gone.
I salvaged my Buds case like this after it fell to the bottom of my coffee (yes it had lots of sugar in it) cup. Couldn't disconnect the battery so I just pull the top inside cover off, flooding with water first then isopropyl alcohol. Had no compressed air so I used a blower bulb then let it sit in the sun on the dashboard. Total time from dunk to sun bake was about 3 minutes.
_Time is of the essence_ especially if the battery is in it. You have minutes (maybe) not hours.
A year later (surprisingly) the case still charges and functions normally.
*Do not use isopropyl alcohol on older LCD displays as it will poison them; they are open on the sides.
It should be 99% isopropyl alcohol not 70%!
Anhydrous isopropyl alcohol attracts moisture from the air so low humidity is best. ESD damage is possible but the water is a bigger threat.
It's also flammable but not extremely just don't get stupid about it.
**salt water has near a 100% mortality rate no matter what you do.
Coffee with sugar... there's a chance
I have changed the phone's battery and it is working fine now. Thank you @blackhawk and @jjgvv for the help.
renatomarcos said:
I have changed the phone's battery and it is working fine now. Thank you @blackhawk and @jjgvv for the help.
Click to expand...
Click to collapse
I would at least take the cover off, unplug the battery and leave in a warm dry place with a fan on it for at least a few days.
If any water is still present it will likely fail.
Turns out, as soon as the new battery drained the problem were back, exactly the same as before, it seems the phone has lost its capacity of charging the battery. Everything was working fine while the battery was charged, screen, speakers, phone calls. I will take the phone to a professional next week, let's see if they can figure it out. If you guys have any suggestions on what could be done I would appreciate as well.
renatomarcos said:
Turns out, as soon as the new battery drained the problem were back, exactly the same as before, it seems the phone has lost its capacity of charging the battery. Everything was working fine while the battery was charged, screen, speakers, phone calls. I will take the phone to a professional next week, let's see if they can figure it out. If you guys have any suggestions on what could be done I would appreciate as well.
Click to expand...
Click to collapse
Your USB port is dead. Replace your USB port.
Hi guys, let me just let register how was the closure for the case.
I have taken the phone to a technician, the phone was disassembled and had its parts washed with isopropyl alcohol. The procedure bring it back to life, it been more than a week so far it has been working fine.