Related
Found this the other day in my parousing for accesories for the tab but noticed it hadn't been posted here.... decent selection, close to 300 designs.... Stupid cheap... about time i've been looking for a while for more than just the carbon fiber ones.
http://cgi.ebay.com/ViewSonic-G-Tab...tem2a11553fb8&clk_rvr_id=245990579742&afsrc=1
I ordered one of these and in discussion if they had any alternative's that had more of an astronomy type back ground the person i was in email contact with indicated they could make these as customs with a pic that you provided. If that interests any one contact them and see what they might could do for you.
Holy macaroni.
http://www.ridicgraphics.com/2011/designs/viewsonicgtablet/
The first thing I noticed is that 99% of these "skins" are in portrait mode. I use my gTab in mostly landscape mode.
The second thing I noticed is that there is no link to the wallpapers for these "G-Tablet Skins" for you to download and use to blend with the skin on the bezel of the gTab after you purchase and apply one of these. I saw there are wallpaper links for other devices but couldn't find one for the gTab.
So this may be exciting for some folks but I didn't find it useful. What I would find interesting would be skins that could look good in either portrait or landscape mode (like the carbon fiber skin I already have).
Also, since I have my gTab in a CLIP case about 85% of the time I seldom think about the skins anymore.
If you want the skin in landscape just ask them. I'm sure they'll accomodate they offered me the ability to make a cutom from a pic that i sent them... i wanted an astronomy theme.. but decided on #246 ...
the back ground.. you download the one for the NOOK color list under "ebooks"... it's an android tablet after all... (you'll have to do some creative cropping to get it to fit right)
I can't find a way to lock the wallpaper in landscape, is that possible? In other words, I want to be able to use my tablet in portraite mode but have the wallpaper still be in landscape mode so it still matches the skin.
I havn't figured out a way... may be there is an app that allows you to have multiple wallpapers... one for landscape and one for portrait...I remember seeing something along those lines somewhere... it may be a feature that is specific to certian Launchers also.. did a quick search and there was an app but it wasn't rated very well...
Swould333 said:
I havn't figured out a way... may be there is an app that allows you to have multiple wallpapers... one for landscape and one for portrait...I remember seeing something along those lines somewhere... it may be a feature that is specific to certian Launchers also.. did a quick search and there was an app but it wasn't rated very well...
Click to expand...
Click to collapse
yeah i saw that somewhere too i thinks its something like multipicturelive or something.......
HOLY COW!!!!!
If the selection from the Ebay dealer listed above wasn't quiet what you're looking for.. a shlew of skins turned up in a search on Amazon this AM... check it out... a bit more pricey.. $17.95 ,still not bad compared to the $30 selection we used to have.... but a TON more designs......
http://www.amazon.com/s/ref=nb_sb_n...VIEWSONIC+GTABLET+SKIN&ie=UTF8&qid=1310642213
Did anyone get theirs made? How did it come out? Does it cover the sides like the carbon fibers do? I only ask because I just bought a P3 case on eBay and everything's going to be covered (even the left speaker ) except the sides where the power button is and the other side. Thanks if anyone can help
has anyone gotten these yet and tried them out? i really want to know about the quality and stuff cuase i was interested
I got #246 the grill looking one from the ebay store.. and no it doesn't cover the sides.. there is about a 1/16 inch (1.5mm) around the perimiter on both the front and back... wich is desirable on the back, keeps it from picking up and collecting dust and swarf... the front is ok.. i would look better benig all the way out to the edge.. but the guys at ridic graphics (ebay store) said that they were having issues with people stretching them while they were putting them on that's why they cut the perimiter in a bit.. graphics look pretty good.. not grainny at all... applied easy enough, though a second set of hands made it easier, someone holding the skin up while you locate it is ideal...... over all i'm satisfied...
thinking of seriously getting one from the amazon store because of the astronomy backround selections they have.. if i do i'll comment on them as well...
About time someone started making these. Anyone have a picture of the fit quality once its installed?
I posted some pics in my original thread on Android tablets forum...
they show the bo-bo'd bezel cut line but Ridic graphics sent me a replacement that makes the gap around the top skin more uniform..
http://www.androidtablets.net/forum...ies/17324-graphics-skins-gtab-10-95-each.html
So for those who have cracked their polycarbonate housing, badly scratched it or simply got tired of the old colour there is a way you can replace the housing yourself and it's a lot easier than it sounds and will cost you about 70 GBP if you are in the UK.
WARNING! I spoke to Nokia about it and this obviously voids your warranty so only do it if you don't care I did it myself and it worked, if you break something along the way I will not be responsible! Perform this at your own risk!
That being said the actuall process is very very easy and anyone with a screwdriver, a bit of common sense and a spare half an hour will be able to do this.
So first of all you need to order the spare parts. If you are changing the colour you'll need to order three: the housing, usb cover/flap, sim tray. If you replace with the same colour you dont need a new sim tray as you can use the old one. You also dont need to buy the USB cover as the old one can be taken off and put on the new body(however this requires you pulling it off with quite a bit of force which could result in breaking it or making it fit less firmly in future so i suggest that you do buy the new USB door either way) The process of placing a new one on is way easier than taking it off.
I ordered my parts off ebay from "Headlane Ltd"
here is the link for the cyan battery cover:
http://www.ebay.co.uk/itm/GENUINE-N...ps=63&clkid=6717331277486914548#ht_1577wt_854
Search for other parts simply changing the colour in the name or just type " lumia 800 sim tray" or "lumia 800 Usb door"
Anyway once you've ordered the needed items it's time to watch a youtube giude.
http://www.youtube.com/watch?v=YS9azQLWNAI
Now this is a FULL-FULL guide on how to completely tear the device apart. If you are only changing the housing then watch the first couple of minutes and the last ones.
Basically you only need these steps:
1. Taking off the screen
2. Taking off the battery cover
3. Taking out the battery
4. Taking out the motherboard
The rest (flash, side buttons, headphone jack, speaker, various antennas etc) stay in the old body and will be supplied in the new one so dont take them out. Although the middle of this video talks about how to do that. But i'll repeat again:
if you are just replacing the housing you dont touch those, it will be supplied in the new one. Basically you'll be able to see it when comparing what your new housing looks like to the one you just took off your phone. When they look the same, stop, FF to the end of the video where its being put back together and start doing that.
I did this myself in less than 20 minutes having watched the video prior to process. I wanted to change my black housing to cyan and did just that.
I've uploaded two images, one is work in progress and the other is finished work!
I'm in a bit of a hurry now otherwise i would make it more detailed, so if there are any questions post them! Plus the video is very very good at explaining this so thumbs up for the maker!
UPDATE:
Just wanted to add a couple of things now that i have a bit more time:
1.If you are changing the housing cover only whether it's to the same or different colour the relevant part of the video is up to 4:47 and from 14:27.
2.The things that come supplied with the new housing and therefore should be left in the old one are:
Speaker at the bottom
3g/gsm antenna next to the speaker
Wi-fi + BT antenna on the left
Heaphone jack
Camera flash (not the camera)
Side buttons
Small magnet that holds the USB cover in place
3.I used my thumbnail to remove the screen and in the whole process left absolutely no scratches/dents on the case or screen. It wasnt too hard to do.
4.In the video, the maker talks about the screw thats under the usb door telling us to leave it in at first as it wouldn't come out, mine fell out straight away when i flipped the case so be careful! Don't lose it! Put it back in when you re-attach the screen.
5.I found taking out the top left part of the screen quite hard using my thumbnail, so i used a screwdriver to push out the metal ring under the usb door (the one in which the screw was in). It's kind of common sense when you see it.
6.I also found it a bit harder than described in the video to take out the metal battery cover after unscrewing 6 screws. Maybe i was being too careful but within two minutes i managed to find the right pressure point and it snapped out easily.
7.Be very careful unscrewing the screws. I almost messed it up on the top right out of the six that hold the metal cover. It was in very tight and i twisted the head a bit withought the actual screw moving and it started to look very bad. Solved it by using a larger T6 screwdriver. Others were fine with T5 just dont rush.
8.I didnt use a magnetic screwdriver and theres no need at all.
my second picture work done!
Nice work! Thanks for sharing
There is nothing wrong with my phone at all... but the white lumia is soooo nice....
Mega Maniac said:
There is nothing wrong with my phone at all... but the white lumia is soooo nice....
Click to expand...
Click to collapse
you're right) i changed mine only because i wanted a cyan since a had a cyan N9. And i must say that i have made the right choice! I actually ended up with better build quality than i had on the N9 even though i did the lumia myself (the screen fits tighter, nothing squeaks etc.)
about the white, i havent yet seen a white housing for sale anywhere.. Perhaps its too early because i havent noticed any other coloured housing covers until recently..on ebay at least.. Anyway if someone finds one share the link!
I was looking at the same seller on eBay. Been searching for a white housing as well no luck yet.
Sent from my Lumia 800 using XDA Windows Phone 7 App
frankieboyo said:
I was looking at the same seller on eBay. Been searching for a white housing as well no luck yet.
Sent from my Lumia 800 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
truth be told I was actually disappointed in how the white one looked when I saw it in phones4u yesterday. I think the white and the black are best suited for the minimalistic design of the n9. However I see cyan and magenta look cooler on the lumia even though before, I also thought the white would look awesome. That's just my opinion but I do advise you to go and check it out first
Mmm thanks might have a look first then.
Sent from my Lumia 800 using XDA Windows Phone 7 App
Is there any way to buy a housing in the US? The only one on eBay seems shady as it's listed as for an 800 but there's no camera button on the side.
http://www.ebay.com/itm/Blue-Origin...Cover-Faceplate-Nokia-Lumia-800-/280837607741
Sent from my Lumia 800 using Board Express
ShotSkydiver said:
Is there any way to buy a housing in the US? The only one on eBay seems shady as it's listed as for an 800 but there's no camera button on the side.
http://www.ebay.com/itm/Blue-Origin...Cover-Faceplate-Nokia-Lumia-800-/280837607741
Sent from my Lumia 800 using Board Express
Click to expand...
Click to collapse
That one definitely does not look OEM. Aside from the missing camera button, the flash is much closer to the lens few a few mm.
ShotSkydiver said:
Is there any way to buy a housing in the US? The only one on eBay seems shady as it's listed as for an 800 but there's no camera button on the side.
http://www.ebay.com/itm/Blue-Origin...Cover-Faceplate-Nokia-Lumia-800-/280837607741
Sent from my Lumia 800 using Board Express
Click to expand...
Click to collapse
Well the camera button can only be seen (or could) on the right one, but thats the housing for N9 look at the flash placement(two golden squares). The one on the right is supposed to be lumia's because the flash is in the right place but yes it's too close. Looks like this seller doesn't know what he's doing.
I dont know anything about US parts sorry. Does Headlane not ship to US? Or would that be too expensive?
Nah, you can see enough of the left item to see it's missing the shutter button.
Rusty! said:
Nah, you can see enough of the left item to see it's missing the shutter button.
Click to expand...
Click to collapse
either way the flash is in a different place on those two so they cant be the same case. so i would definitely not get whats on this picture. The seller might be selling actual parts just not know much aout them)
aslan93 said:
either way the flash is in a different place on those two so they cant be the same case. so i would definitely not get whats on this picture. The seller might be selling actual parts just not know much aout them)
Click to expand...
Click to collapse
Judging by the photo, it doesn't look like an OEM N9 nor Lumia 800. The N9 has the flash to the side of the lens and the Lumia 800 has the flash several mm above the lens. This is a cheap knock off.
The one on the right has the flash on the side of the lens, the one on the left doesn't.
It's just a mish-mash of crap
ok guys like i said before, the one on the right is the one for the N9, i have one and i know.. it also looks very legit (for the n9) at least it looks the same watch:
http://www.youtube.com/watch?v=mSJtUbnM46E
esp (2:33)
The one on the left is... i dont know wtf that is.. but the seller doesnt know what he is doing so i wouldnt buy from him.
Agreed. Looks dodgy. Headlane have there own eBay site and stock all the housings. Just emailed them asking when to expect the white to be stocked ;-)
Sent from my Lumia 800 using XDA Windows Phone 7 App
Ok just got a reply very quickly. Might have the white in a few weeks . £60 not too bad.
Sent from my Lumia 800 using XDA Windows Phone 7 App
aslan93 said:
Well the camera button can only be seen (or could) on the right one, but thats the housing for N9 look at the flash placement(two golden squares). The one on the right is supposed to be lumia's because the flash is in the right place but yes it's too close. Looks like this seller doesn't know what he's doing.
I dont know anything about US parts sorry. Does Headlane not ship to US? Or would that be too expensive?
Click to expand...
Click to collapse
Funnily enough, a week ago when I found this auction the pictures of the housing were clearly a Lumia 900, with the flash on the side. The pictures changed to what they are now a few days ago so.... definitely shady.
Yeah, the problem with Headlane is they don't ship to the US at all. They don't even come up in the search on the US site.
ShotSkydiver said:
Funnily enough, a week ago when I found this auction the pictures of the housing were clearly a Lumia 900, with the flash on the side. The pictures changed to what they are now a few days ago so.... definitely shady.
Yeah, the problem with Headlane is they don't ship to the US at all. They don't even come up in the search on the US site.
Click to expand...
Click to collapse
They may have been images of the N9 housing, which also has the flash on the side.
I have a very specific question with regards to replacing the charging port on the i777. I have searched threads discussing charging port replacement, but was unable to find anything about this specific issue. I am currently going through my first repair on my i777 that needs a new charging port. I bought the replacement on ebay, but something stood out once I compared it to the original charging port I took out. On the original there is a small rubber piece hanging down (around where the screw holes are). On the replacement piece it's just a metal piece hanging down in the same place. Do I need to have that rubber piece on the replacement charging port? Would it even affect the functionality of the phone? Is there a way to take the rubber piece off the original and transfer it to the replacement, or should I just buy one with the rubber piece on? If someone has asked this question already forgive me, but I did not see it in the thread I skimmed through.
Here is a pic of both them side by side. The top one is the original and the bottom is the replacement I got from ebay.
farm8.staticflickr (.com) /7281/9735538853_4e701482f8_o (.jpg)
It would not let me post link yet so just remove parentesis and spaces to view picture link.
That gray part is for waterproofing the microphone I believe. It just slides off of the old part and onto the new one, just be careful. Also if you have no signal, by now you may have already found the following thread. I had to do this a couple of weeks ago to get a signal: http://forum.xda-developers.com/showthread.php?t=1950114&page=5 I'll try harder to match up the part numbers next time!
iXNyNe, please let us know if the newegg part works, or if you end up needing to modify it (see link in above post), or purchase another.
iXNyNe said:
http://www.newegg.com/Product/Product.aspx?Item=9SIA2C51D87922 just ordered this. [...]
Click to expand...
Click to collapse
cyril279 said:
iXNyNe, please let us know if the newegg part works, or if you end up needing to modify it (see link in above post), or purchase another.
Click to expand...
Click to collapse
i'll report back once i have them
i already took the phone apart just to peek around inside, the part looks just like what's already there. the picture shows some teal/aqua colored tabs towards the bottom, im assuming these are peel off for an adhesive (there did seem to be an adhesive holding the part in place).
based on that link mentioned i would say that cutting is a little extreme, it looks like they cut the board in half, which is definitely NOT how it comes stock.
again i'll report back once i've got the chips. and for under $8 with free shipping i cant really complain even if they dont work out.
The only thing you're actually cutting (electronically) is the ground plane of the board shared by the antenna/radio and the charge port. In short, there's a super low risk of messing anything up, unless you use a sawzall to complete the job.
I assume that it was more cost effective for Samsung to put those items on the same board, but it's a punk move to attach a known replacement part to an antenna that varies by region. Either way, I'm glad to know that the hack is an option but I'd be happier to know that the hack isn't necessary.
iXNyNe said:
i'll report back once i have them
i already took the phone apart just to peek around inside, the part looks just like what's already there. the picture shows some teal/aqua colored tabs towards the bottom, im assuming these are peel off for an adhesive (there did seem to be an adhesive holding the part in place).
based on that link mentioned i would say that cutting is a little extreme, it looks like they cut the board in half, which is definitely NOT how it comes stock.
again i'll report back once i've got the chips. and for under $8 with free shipping i cant really complain even if they dont work out.
Click to expand...
Click to collapse
Just wanted to report success. The part from new egg worked and was really easy to swap.
I don't have the right size sim card anymore since switching my primary carry, so I can't test reception, but otherwise everything is working (charging, wifi, Bluetooth, etc)
P.s. I did not modify the item I received (no cutting) and it is a 2.3 where the original I removed was a 2.2. I've saved the 2.2 just in case something comes up.
Sent from my LG-D800 using Tapatalk
Thanks, but I'm afraid that we won't know whether the replacement part is a proper replacement until there is a sim-card involved. Reception is the rub (see post below from the board-mod thread).
underhuggare said:
[...]I also replaced the original rev 2.2 with rev 2.3 which fixed the usb port but gave me very unstable and poor reception. [...]
Click to expand...
Click to collapse
iXNyNe said:
Just wanted to report success. The part from new egg worked and was really easy to swap.
I don't have the right size sim card anymore since switching my primary carry, so I can't test reception, but otherwise everything is working (charging, wifi, Bluetooth, etc)
P.s. I did not modify the item I received (no cutting) and it is a 2.3 where the original I removed was a 2.2. I've saved the 2.2 just in case something comes up.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
cyril279 said:
Thanks, but I'm afraid that we won't know whether the replacement part is a proper replacement until there is a sim-card involved. Reception is the rub (see post below from the board-mod thread).
Click to expand...
Click to collapse
I'll see if I can find a friend with a full size Sim over the next few days and test the reliability. But honestly I'd have to it may be better for people to find a rev 2.2
But for anyone who no longer uses the phone for cell service, the new egg part works great for a cheap and easy charge port replacement.
Sent from my LG-D800 using Tapatalk
Not sure if I want this phone anymore.
https://twitter.com/markgurman/status/1118574467255418880
https://twitter.com/backlon/status/1118573836226658304
https://twitter.com/stevekovach/status/1118571414934753280
I was about to post this, i pre order and I'm wondering anyone cancelling there orders
cheapshot789 said:
I was about to post this, i pre order and I'm wondering anyone cancelling there orders
Click to expand...
Click to collapse
I just sold my note so I might go pick up a s10+ until I figure out if these issues are widespread
I have my s10 plus but now I'm debating whether to cancel pre order
Theres a good video from Mark munoz YouTube explaining this right now seems its only 2 devices malfunction others is trying to remove the plastic on top of the screen that's had been labeled not to be removed do i guess good news.
Here’s an important notice for current and future Galaxy Fold owners :angel:
https://www.sammobile.com/2019/04/1...portant-notice/amp/?__twitter_impression=true
SAMSUNG GALAXY FOLD ??????
Having watched an unhealthy amount of review videos, quite a few are mistreating them in my opinion. Slamming it shut really hard, tossing it down on to the desk, holding one side and trying to flip it open or closed. Not how you'd actually treat a device youd spent almost 2 grand of your own money on. And the one with the screen bulge that broke, they admitted to having used clay to hold it up for a photo shoot and that some could have got inside the hinge and caused the damage.
I'm not sure there's actually an issue here for anyone who looks after their devices. And if it turns out that the devices can't cope with real life, then get a refund. You either end up with a fantastic device that you really wanted, or you've gotten to play with one until it breaks and you get your money back. There's not really any downside apart from hassle of setting up a new phone again.
I literally watched a reviewer on YouTube put a pizza and hotdog in the Fold and pretended to eat the food from the device *smh
sharingan5791 said:
I literally watched a reviewer on YouTube put a pizza and hotdog in the Fold and pretended to eat the food from the device *smh
Click to expand...
Click to collapse
Yeah that really pissed me off ? for some reason. It's like they're showing off. It's not their money though.
¯\_(ツ)_/¯
Yeah there attack articles are really unair whey all say in title galaxy folds are breaking No.... reviewers are breaking the devices a few idiots removed a very hard to remove screen protector that didn't come off easy at all one person got clay in the hinge another device looks like it was sat on and a display cable was likely broken
then at the very bottom, they actually say what happened there click bait caused Samsung Stock to drop sharply losing millions in value i would never send them another unit but im petty
https://mspoweruser.com/new-evidence-of-samsung-galaxy-fold-design-flaw-emerges/
Just like the Verge but without the failure. I don't think its build quality but rather it just happens in the real world.
Breaking: Samsung Galaxy S23 Ultra UK units have screen defects, Samsung replied - SamNews 24
Samsung has recently launched the Galaxy S23 Series and some users started reporting that the screen of the ... Read more
www.samnews24.com
https://twitter.com/i/web/status/1625432044581822464
Mine unit from Poland also have this... More over i found one redditor that have bended unit.. I put mine on leveled (screen side) surface and also is bended... So meny $ a issues...
Check yours...
I am not going to defend Samsung etc, however if your unit is broken, got defects, or you are not happy with something - just send it back, ask for replacement or just return it then buy new one.
It's not just his... looks like a lamination issue.
Not something you should see on a flagship display.
Rather than owe up to it Samsung is making excuses saying it's normal. Translation: there must be a lot of them with this defect...
Joloxx9 said:
I am not going to defend Samsung etc, however if your unit is broken, got defects, or you are not happy with something - just send it back, ask for replacement or just return it then buy new one.
Click to expand...
Click to collapse
First: If you were read article you will knew that Samsung said it is manufacturing side effect so maybe it is not so obvious to return the unit. The defect is in the same place on all reported phones... Could be hard to get one without it as guy in twitter try 2 times and both have the same issue.
Second: If you were look inside the twitter comments you will see that it is not only uk but also in usa and other regions that are affected.
Third: 23u is my primary phone, so not so easy to just return it and stay without the phone as i also use esim. And more over i can get another unit with the same defect or even they will not accept it as they mention as it is side effect of manufacturing.
Right now it is not disturbing the use of the phone, but as i know it is there it is quite not comfy...
It's really irritating that people look for this nonsense that doesn't affect the functioning of the phone one iota and then share it around and ruin everyone else's enjoyment of their devices.
I can confirm that my US Ultra has this. Never would have seen it if it wasn't pointed out.
aureum said:
First: If you were read article you will knew that Samsung said it is manufacturing side effect so maybe it is not so obvious to return the unit. The defect is in the same place on all reported phones... Could be hard to get one without it as guy in twitter try 2 times and both have the same issue.
Second: If you were look inside the twitter comments you will see that it is not only uk but also in usa and other regions that are affected.
Third: 23u is my primary phone, so not so easy to just return it and stay without the phone as i also use esim. And more over i can get another unit with the same defect or even they will not accept it as they mention as it is side effect of manufacturing.
Right now it is not disturbing the use of the phone, but as i know it is there it is quite not comfy...
Click to expand...
Click to collapse
First - I read it, if you are not happy with the product, don't use it, simple. You still have 14 days to send it back if you are not happy, vote with your wallet.
Second - And? Not sure how big % of phones got that issue, but same as above applies, if people are not happy they should send units back. Maybe then samsung would acknowledge issue.
Third - No one force you to stay without phone, if you sold etc. your previous one or sent it back for trade in, then make a complain to Samsung.
And fourth, if you read my post with understanding you would get that I do not defend them. Sending back bad/wrong/broken etc product is our right, Samsung and S23 is not the only phone on the market, if you have issues with them, than feel free to buy something else.
I was angry with oneplus few years ago and guess what, I am on samsung now.
EtherealRemnant said:
It's really irritating that people look for this nonsense that doesn't affect the functioning of the phone one iota and then share it around and ruin everyone else's enjoyment of their devices.
I can confirm that my US Ultra has this. Never would have seen it if it wasn't pointed out.
Click to expand...
Click to collapse
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
blackhawk said:
It's not just his... looks like a lamination issue.
Not something you should see on a flagship display.
Rather than owe up to it Samsung is making excuses saying it's normal. Translation: there must be a $hit load of them with this defect...
Click to expand...
Click to collapse
If that's what they say and your unit have it, vote with you wallet and send it back, there will be no change when people moan on this forum and Samsung keep their sales.
aureum said:
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
Click to expand...
Click to collapse
This is nothing but people hunting for reasons to dislike the phone. It has zero effect on functionality and you have to really be looking to even see it. It's a nothingburger discovery some iPhone fanboy found and put on Twitter to cause drama.
aureum said:
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
Click to expand...
Click to collapse
The problem is it's not supposed to be there at all. Not on my N10+'s. On a display that's not acceptable. It's a manufacturing defect and right where it's always in your face.
Worse, pretty sure Samsung was aware of this defect but they shipped them anyway. Like a brat they do what they want then make lame bs excuses for their actions. This isn't a injection molding tab Sammy, it's a screw up.
At this point there's no telling if over time it will get worse and/or spread. I'd return it for a cash refund especially at this price point, where the defect is and Samsung's condescending attitude.
but this is only visible with a strong light source, with certain angle of light with screen off. it has no impact on usability. i have seen it in the past on other curved displays
Edited by moderator to correct formatting
I upgraded to s23u with EE and i got it on 13th , 512gb ,green. Everything fine,until 3 days later when i installed a Samsung screen protector on,using a flashlight i was eyeballing for dust particles using a sticker. Right bottom corner i noticed a smudge, wiped off,still there, anyway upon close look ,in certain angle using the flashlight, i noticed this crease/bubble/dent around 4mm in width and 2mm height . To me it looks like a dent inwards rather than a bubble. Checked my pixel 7pro,nothing, checked my missus s21plus(flat screen),nothing, then i remembered i have stashed a galaxy s8(still works a take faster photos than s23u though) anything like this,screen was perfect.
Don't get me wrong, only in bright light ,shining directly on the screen you can see it. The touch screen works perfectly.
I contacted EE, the tech support said it looks like delamination or sort and could spread in time, right ,i said i do like the phone and i would like an exchange. EE delivered next day the replacement, as you guessed, same issue, this time half in size,almost not visible, but because i knew where and how to look ,i spotted it right away. Also very fine crease on the right,but almost not visible(unless you know what to look for).
Can i live with this ,yes i can,do i want to take a risk,thinking that potentially, ot could spread over thetime,hmm ,i don't. Opened a second return.
For ppl who said that this is not a big deal,remember, th ise damn phone is expensive and it should be perfect,like my previous s22ultra amd my 5 years old S8
I attached some photos 1,the first phone and 2
glad i am not that inquisitive otherwise i would still use nokia 3110
My S23 Ultra has it. Then I just realized after a year of using my S22 Ultra that this is the case as well... Guess it doesn't really matter.
nawat said:
My S23 Ultra has it. Then I just realized after a year of using my S22 Ultra that this is the case as well... Guess it doesn't really matter.
Click to expand...
Click to collapse
even my old S8 has it
EtherealRemnant said:
It's really irritating that people look for this nonsense that doesn't affect the functioning of the phone one iota and then share it around and ruin everyone else's enjoyment of their devices.
I can confirm that my US Ultra has this. Never would have seen it if it wasn't pointed out.
Click to expand...
Click to collapse
I'm still having trouble seeing it in these pictures, even when it's directly pointed out, lol. I'm not gonna examine my phone. It looks generally fine and I'm gonna stick with it.
aureum said:
We should not talk about any issues regarding quality of expensive phone to not irritating ppl? Hmm m ok.
Click to expand...
Click to collapse
I think the issue is that most people wouldn't even notice if someone didn't point it out to them in special lighting. I think you should be able to discuss and point out anything you deem flawed. But on the other end you should also expect pushback from people who think you are just being spoiled when you have the option to return it. I have noticed it on my Galaxy S23 Ultra US version but only by looking at it in lighting. I think the device is fantastic and even with that little flaw I will keep my device since I can't really notice it since I have a case on it.
catalin78 said:
I upgraded to s23u with EE and i got it on 13th , 512gb ,green. Everything fine,until 3 days later when i installed a Samsung screen protector on,using a flashlight i was eyeballing for dust particles using a sticker. Right bottom corner i noticed a smudge, wiped off,still there, anyway upon close look ,in certain angle using the flashlight, i noticed this crease/bubble/dent around 4mm in width and 2mm height . To me it looks like a dent inwards rather than a bubble. Checked my pixel 7pro,nothing, checked my missus s21plus(flat screen),nothing, then i remembered i have stashed a galaxy s8(still works a take faster photos than s23u though) anything like this,screen was perfect.
Don't get me wrong, only in bright light ,shining directly on the screen you can see it. The touch screen works perfectly.
I contacted EE, the tech support said it looks like delamination or sort and could spread in time, right ,i said i do like the phone and i would like an exchange. EE delivered next day the replacement, as you guessed, same issue, this time half in size,almost not visible, but because i knew where and how to look ,i spotted it right away. Also very fine crease on the right,but almost not visible(unless you know what to look for).
Can i live with this ,yes i can,do i want to take a risk,thinking that potentially, ot could spread over thetime,hmm ,i don't. Opened a second return.
For ppl who said that this is not a big deal,remember, th ise damn phone is expensive and it should be perfect,like my previous s22ultra amd my 5 years old S8
I attached some photos 1,the first phone and 2
Click to expand...
Click to collapse
return it and get your previous S22 Ultra.
I am not seeing it on mine but I could be blind
duckfart said:
I am not seeing it on mine but I could be blind
Click to expand...
Click to collapse
It's probably present on certain batches; some will have it, others not. A major QC screw up. If the defect was minor you wouldn't be able to see it at all.
This is a defect that could effect the survivability of the glass. Glass is subject to some of the laws of hydrodynamics. This deformity causes new stress points. It may not crack there but in another area of the display, hydrodynamics. Glass is a peculiar substance with bizarre properties. Of course if it breaks Samsung will say it's your fault for dropping it.
DON'T SAY YOU WEREN'T WARNED