I had on the phone 1600.3013.8107.11502. Then I update to 1600.3015.8107.12070. I did it by the refurbish option in the NCS. One month later i wanted to flash on 1600.3030.8773.12120
When i plug phone, the computer detected it other than ever. I saw Qualcomm CDMA Technologies MSM and removable disk with question about formatting. I clicked cancel but NCS does not detect the phone. My computer couldn't install driver for Qualcomm CDMA Technologies MSM. I tried it on others computers but on all its the same, i can't flash this ****. I was looing for solution on others forums but no one can help with this.
Thx for answers.
You have the Qualcomm bootloader. NCS does not recognize this bootloader. I f you want NCS to recognize your device, you will need the NOKIA DLOAD bootloader. However, the Qualcomm is the unlocked one, so depending on your preferences, you can leave it on the Qualcomm. With the unlocked bootloader (which you have) you will only need an other flashing method. Those can be found on the forums here.
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
i have amlmost same problem, but my phone is dead, when i turn it on it stays ond nokia screen
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
Your cellphone is working?
I downloaded NSS but it doesn't detect my phone
And if i had the Qualcomm bootloader,How do i go in recovery?
just want to make a nand backup for a friend and root his stock phone.
I own a sgs+ with a custom rom of andoid so i'm noob at wp.
thx,
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
If you have this error, please check if the phone restarts in this step or just
stays in Normal mode (windows screen). There are some software versions that
will not respond to the OSBL change command. So just try to flash different
version (via .nb file) and try again.
The other option is the manual restore(hex edit), but its really risky if you don't know
what are you doing.
The problem seems to be caused by version mismatch between the OS and the
baseband firmware. Here the solution and more info.
I also has a problem like: "Are you sure you have development Qcom loader"
when trying to flash rainbow mod FW by lucifer to my lumia 710 using NSS pro v0.48. Does anyone has a same problem with me? all steps that told in http://forum.xda-developers.com/showthread.php?t=1620629 i already been followed. but still i can't flash the FW mod, FYI I already succeed in installing FW with qualcom bootloader before using NSS pro.
Cheers
Dear XDA community,
everyday i'm reading new questions from users, how they have to unlock their Lumia 800 and how they can flash custom roms onto it...
So i decided to make this how-to-thread.
I'll keep this post updated as an overview:
post 2: Bootloader unlock DLOAD Lumia 800 to Qualcomm
post 3: Backup and flash your L800 with Ubuntu, flash in Windows using dewe's Lumia Downloader 0.5
post 4: How-To use USB-Video-Out
So please, guys, read this thread, and if you don't understand, feel free to ask. :good:
Bootloader unlock DLOAD Lumia 800 to Qualcomm
If you want to flash a custom rom, you need to have a Lumia 800 with qualcomm bootloader.
But it's a difficult way to make your DLOAD Lumia 800 to Qualcomm:
You need two main things:
1. You need ATF flasher box
2. You need good soldering skills or the special atf cables from gpg industries
Here's a tutorial to SIM-Unlock a Lumia 800: How-To SIM-Unlock your Lumia 800 - gsmhosting.com
This is almost the same procedure for "bootloader-unlocking" your Lumia 800.
You just do not need to click SP-Unlock, you need to click "boot repair" (and select qualcomm, of course).
Here's the thread of the special cables: No more soldering for lumia 610,710,800,900 easiest osbl swap ever
These cables do not require you to solder your device. You only need to open up your phone and connect it to the cable and your ATF Box.
So, if you don't want, or can't buy such a box, check for a local phone repair shop in your town/city. If they have ATF, i'm sure they can do this for you for a small amount.
Hope this helps.
Flash your custom rom using dewe's Lumia Downloader 0.5
Dewe's Nokia Lumia Downloader 0.5
I attached the Nokia Lumia Downloader 0.5 for flashing your Lumia 800 easily in Windows.
Thx to dewe for his great work!
This requires your Lumia 800 to have the qualcomm bootloader!!
First: make a backup of ALL 9 partitions of the phone!
This might really save your ass Id did save mine more than once :good:
1. Install Ubuntu to your computer, or use Ubuntu-Live-CD
2. put phone into "Qualcomm Mode" by pressing VOL UP + POWER and connect it to your pc
3. check with
Code:
sudo fdisk -l
how your phone appears in ubuntu
4. backup your partitions using this:
Code:
sudo dd if=/dev/sd[B]X[/B]1 of=/media/Data/backup1.bin
sudo dd if=/dev/sd[B]X[/B]2 of=/media/Data/backup2.bin
sudo dd if=/dev/sd[B]X[/B]3 of=/media/Data/backup3.bin
up to
sudo dd if=/dev/sd[B]X[/B]9 of=/media/Data/backup9.bin
where the X is your special letter, mostly it's b, c, or d.
if = your input file
of = your output file
And this might take up to 2 hours.
Restoring your backups is the exact opposit.
second: you can now flash your Lumia 800.
because you're already in Ubuntu, you can flash it using:
Code:
sudo dd if=/path/to/your/os-new.nb of=/dev/sd[B]X[/B]9
You MUST flash the os-new.nb file to partition 9!!!
Or you can use attached Nokia Lumia Downloader on Windows.
1. Connect your phone in "qualcomm mode"
2. open the Tool with admin rights in Windows
3. Klick "download" and select os-new.nb file
NOTICE: when you connect the phone in "qualcomm mode" in windows, you'll get a message of formatting the drive. DO NOT DO THAT!!!! CLICK CANCEL! If you format, your phone's broken.
How-To use USB-Video-Out
How to use USB Video Out:
As it seems to be a little "difficult" to use the usb video out package, here's what you have to do (this is a copy out of the readme file of the package):
You can download the needed files here:
USB-Video-Out.rar
Mirror @4shared
Enabling USB video out on the phone (ON THE PHONE)
- From Start Menu swipe over to the application list and run "USB Video Out"
- Answer Yes to enable USB Video out. This is a toggle.
- When the phone boots up it is in Zune Mode which enables it to sync data with Zune Client software on the PC. You will need to toggle this to Video mode using the above steps to get video out.
- Note: Toggling between Zune mode and Video mode requires the phone to reboot each time.
Setting up driver on the desktop (one time)
- Make sure Zune is not running.
- Your Phone must be flashed with a ROM that has video out bits on it, they must be enabled, and the phone must be on and plugged into your PC to continue. When the phone boots up the default setting is OFF for the video output.
- Start -> Right click on Computer, select Manage
- In "Computer Management" click on the Device Manager
- Under "Other Devices"
- Within the list of drivers Right Click on WM7VIDSTREAM driver, select "Update Driver Software..."
- Choose Browse and point Windows to appropriate driver folder.
- Approve the Unsigned Driver installation.
Starting application
- Launch VidStream.exe.
- This application does support disconnect & reconnecting of the phone's USB cable.
- If a previous instance of VidStream.exe was running with the device connected, you will need to simply unplug and replug the phone's USB cable.
- Press ESC to exit the PC Client application.
Re-enabling MTPz USB sync (Zune Mode)
- Open "USB Video Out"
- Answer Yes to enable MTPz
- The device will reboot to make the changes effective.
Click to expand...
Click to collapse
Oh, I was about to write that I'm flashing my phone on Windows but then I saw this method below the Ubuntu.
Isn't it better to put the windows method above the ubuntu? I think more ppl use Windows and possibly won't se the windows method as me
Paviano said:
Oh, I was about to write that I'm flashing my phone on Windows but then I saw this method below the Ubuntu.
Isn't it better to put the windows method above the ubuntu? I think more ppl use Windows and possibly won't se the windows method as me
Click to expand...
Click to collapse
Hi, thx for reply, i wrote it this way, because i wanted to point out, that it is really recommended to make a backup.
If i put the windows flashing above, most people will stop reading, and don't make a backup
I think this way, more people read the backup story, so it's their choice if they don't make one
Zune
Hey thanks for this tutorial. I just had one quick question.
After I do this can I still sync with Zune? Because I would like my data such as songs and apps back. Is this still possible?
if i got for it, it will cost me about 12000 Pakistani rupee for ATF, and about 4000 Pakistani rupee for cable............total 16000, and i can buys with this + sale price of my cell = samsung s#........my GOD....where i am
Good bye to lumia 800....wanna get rid off
bowi1612 said:
Hey thanks for this tutorial. I just had one quick question.
After I do this can I still sync with Zune? Because I would like my data such as songs and apps back. Is this still possible?
Click to expand...
Click to collapse
Hi there,
sorry for late reply.
I you mean with "doing this" unlocking your bootloader, syncing data does not really have anything to do with your bootloader.
Generally, if you make your DLOAD to Qualcomm, your personal files are still on your phone, as bootloader changing does not overwrite any personal files (partition 9 of the phone).
It matters more, which rom you install, if syncing content with zune is still possible or not.
If you flash a custom rom, your data is whiped, as you overwrite your OS partition with the custom rom. But after that, with my roms for example, you can sync your songs etc. back to your Lumia.
I don't think this might work with apps, you have to install them again via marketplace.
Is it possible to use your ROMs on N9?
Is it possible to use your ROMs on Nokia N9? If yes how?
with regards
hrbani said:
Is it possible to use your ROMs on Nokia N9? If yes how?
with regards
Click to expand...
Click to collapse
Is this a serious question??
mate... N9 is a totally different phone, this will NOT work!
Thanks. I'm amateur and know noting about ROM port and others, I asked that question because I want win phone on my N9 .
with regards
Bootloader unlock DLOAD to Qualcomm L800
If I do Bootloader unlock DLOAD to Qualcomm L800 using ATF NITRO ...
do this make any changes on my ROM..?
will this make my phone data wiped...?
and do i need any kind of flash files for this
saddam.khan999 said:
If I do Bootloader unlock DLOAD to Qualcomm L800 using ATF NITRO ...
do this make any changes on my ROM..?
will this make my phone data wiped...?
and do i need any kind of flash files for this
Click to expand...
Click to collapse
Hi there,
no, this only overwrites your bootloader, which is on a different partition as the phone operating system.
so this will not wipe your phone data.
just flashing a custom rom will wipe your data.
Remove Funkyrom
I am just wondering. If I ever want to go back to the Original Windows Phone OS, can I just restore to factory settings on my windows phone? Or do I need to do some other stuff, I can't find an answer anywhere.
bowi1612 said:
I am just wondering. If I ever want to go back to the Original Windows Phone OS, can I just restore to factory settings on my windows phone? Or do I need to do some other stuff, I can't find an answer anywhere.
Click to expand...
Click to collapse
Hi there,
if you've made a backup, you can restore this and reset your phone afterwards.
That's the best solution in my opinion, because you're back on the original rom, but you're still on the qualcomm bootloader, so you can reflash a custom rom whenever you want
Of course you can restore DLOAD and flash the original ROM with ATF, too. But then you have to do the soldering stuff again, if you want to use a custom rom in the future.
thanks for your support
What about the method from cyclone box?
Do you think there will be a method soon for changing bootloader without opening the phone and buying a box? The problem is I don't want to pay for cyclone box.
Celteek said:
What about the method from cyclone box?
Do you think there will be a method soon for changing bootloader without opening the phone and buying a box? The problem is I don't want to pay for cyclone box.
Click to expand...
Click to collapse
No. I think there'll never be an option.
Afaik, this is only possible with ATF, not with cyclone.
lordmaxey said:
No. I think there'll never be an option.
Afaik, this is only possible with ATF, not with cyclone.
Click to expand...
Click to collapse
It is said on their website that it is possible to patch bootloader without opening the phone. (sorry I can't post links yet, but it is easy to find on google by typing "cyclone box lumia 800 no tp" ). Unfortunately we need a cyclone box . My question is : will there be a method with which we don't need a cyclone box?
I tried to view if my nokia have a qualcomm bootloader to put a custom firmware, and unfortunately i've format them( QUALCOMM CDMA.....) and now my phone is bricked... I tried to bring back to life with this post : http://forum.xda-developers.com/showthread.php?t=1457341 but unsuccesful.....i can't download a firmware for it ( Error: Access is denied. Verify credentials., and after this i get a crash ..) .please help me.
Hi there,
oh boy...
You're screwed up. You formatted the bootloader partition of your phone. This can only be repaired with atf box.
Sorry.
which, by the way, you do not want to do yourself.
Take it to a place - if possible - where they have ATF box and skills to use it.
another way is replace your phone main board. check out on ebay. sorry.
I was trying to unlock with gc pro key with sprint unlock to work with gsm carriers and it didnt work for me. So i tried a different formula which i flashed a firmware "ZV3" on Z3X Box and i was running on ZV5. Now the phone doesnt turn on and when connected to computer the usb driver says "Qualcomm Usb USB QDLoader 9008. Any solutions will be highly appreciated and would save me on having to buy a customer a new phone.
First lesson.. don't downgrade any lg latest phones, 2nd dont use boxes too flash it, use lgup so you can get warning of laf downgrade. 3rd search medusa or z3x jtag if they support jtag, or if you smart enough too find pinoits on board for jtag.
xplict310 said:
I was trying to unlock with gc pro key with sprint unlock to work with gsm carriers and it didnt work for me. So i tried a different formula which i flashed a firmware "ZV3" on Z3X Box and i was running on ZV5. Now the phone doesnt turn on and when connected to computer the usb driver says "Qualcomm Usb USB QDLoader 9008. Any solutions will be highly appreciated and would save me on having to buy a customer a new phone.
Click to expand...
Click to collapse
i also bricked my ls775 any one have system dump can write in sdcard may be get download mode thanks
ls775 rom dump.
gdeepp said:
i also bricked my ls775 any one have system dump can write in sdcard may be get download mode thanks
Click to expand...
Click to collapse
dear sr. i have zv5 and zv7 rom dumps of this phone, thing is that partitions are not the same in both versions, so you need to know which one you had on your device, if you know to flash this with sd card i'll provide both software versions for free, as long as you are willing to share the "flashing with sd" tutorial, if it actually works of course. by the way, both versions were dumped with z3x.
ls775 rom dump
hcom said:
dear sr. i have zv5 and zv7 rom dumps of this phone, thing is that partitions are not the same in both versions, so you need to know which one you had on your device, if you know to flash this with sd card i'll provide both software versions for free, as long as you are willing to share the "flashing with sd" tutorial, if it actually works of course. by the way, both versions were dumped with z3x.
Click to expand...
Click to collapse
bro i was bricked on ZV5 so u only upload it on google drive or mega.....also if u have any knowledge about Sd card flash also share it thanks
ls775 qdloader 9008
Well guys, i have one piece in the same condition, I have z3x but there is no support for this model, no firmwares no jtag files or even pinout, if any of you find the way to flash the emmc back in to the phone please let me know. i can offer you the extracted files for version zv8 and zva, if someone needs them to test or whatever i am willing to share.
have a nice day
lo solucione amigos