[DEV Request] pre-rooted ICS stock kernel < Xperia U > - Sony Xperia P, U, Sola, Go

For those that have/can developed kernels:
We really need a decent pre-rooted ICS stock kernel for the Xperia U.
The current root hacks work, but are not proper.
They don't install BusyBox correctly and with it we lose the ability for advanced shell scripting.
My own app depends on the ASH shell scripting capabilities and is therefor only half functioning under ICS.
Since I sell it and make a little bit of money ($50 bucks up till now..) I want to offer a small incentive to make it fair.
And will reward a $10 donation for the person that can make a decent kernel in the next week.
I know.. it won't make you rich
It's just to make clear that I don't want to profit from your knowledge and time as it will help me and other ROM dev's allot.
Thanks!

I donate another 10.
Sent from my ST25a using xda premium

Im not sure because I dont needed it till now, but with the Flashtool you can install root (with busybox) and you can install busybox seperately.
Got that message in Flashtool::
INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
LEDs-U-CTRL makes my leds being a rainbow ^^

Also v13 of bi4nary (?) works.
But yes, will also donate some bucks for a cwm kernel.

sweatbox said:
Im not sure because I dont needed it till now, but with the Flashtool you can install root (with busybox) and you can install busybox seperately.
Got that message in Flashtool::
INFO - Installed version of busybox : BusyBox v1.19.0 (2011-08-14 23:46:58 CDT) multi-call binary.
Click to expand...
Click to collapse
I know, but it doesn't do the job fully correct. I've tried this method and the Binary Root.
With both ASH scripting doesn't work after using these methods
besides this a pre-rooted kernel is a good starting point for more rom tweaking

nixx-X1 said:
For those that have/can developed kernels:
We really need a decent pre-rooted ICS stock kernel for the Xperia U.
The current root hacks work, but are not proper.
They don't install BusyBox correctly and with it we lose the ability for advanced shell scripting.
My own app depends on the ASH shell scripting capabilities and is therefor only half functioning under ICS.
Since I sell it and make a little bit of money ($50 bucks up till now..) I want to offer a small incentive to make it fair.
And will reward a $10 donation for the person that can make a decent kernel in the next week.
I know.. it won't make you rich
It's just to make clear that I don't want to profit from your knowledge and time as it will help me and other ROM dev's allot.
Thanks!
Click to expand...
Click to collapse
Gxnx

bbshimanshu said:
Gxnx
Click to expand...
Click to collapse
What does gxnx mean?

-nvrmind-

I don't know whats your problem with Binary's method but i made a prerooted ics kernel. Try it.

atis112 said:
I don't know whats your problem with Binary's method but i made a prerooted ics kernel. Try it.
Click to expand...
Click to collapse
WOW! That was fast! Works with ICS?

atis112 said:
I don't know whats your problem with Binary's method but i made a prerooted ics kernel. Try it.
Click to expand...
Click to collapse
What happens if you type " ash " in a shell terminal ?
Could you send a screenshot of the result?

If I install this Kernell, my phone does nothing. Not even Sony-logo at boot.
I have to power on into fastboot, and flash the original Kernell again.

BlaRock86 said:
If I install this Kernell, my phone does nothing. Not even Sony-logo at boot.
I have to power on into fastboot, and flash the original Kernell again.
Click to expand...
Click to collapse
Sad...

atis112 said:
I don't know whats your problem with Binary's method but i made a prerooted ics kernel. Try it.
Click to expand...
Click to collapse
Thx. Half the way. Now we need cwm in it!
Edit: seems not working. Is it for u. Did you test it before sharing?

Big notice for xda!
I am trying to do a ics kernel (3.0.8) with init.d,busybox,root and cwm!

GEKTHEBOSS said:
Big notice for xda!
I am trying to do a ics kernel (3.0.8) with init.d,busybox,root and cwm!
Click to expand...
Click to collapse
So you're the one getting my $10? :victory:

felipevsw said:
So you're the one getting my $10? :victory:
Click to expand...
Click to collapse
Actually i do all for FREE.
If i release this kernel no payment!
Actual state of development :
Actually insecure and rooted

so, where is the 6.1.1.B.1.10 Kernel Sources from Sony?
pretty sure they'll help
---------- Post added at 12:38 PM ---------- Previous post was at 12:37 PM ----------
btw, i rooted my XU with latest Binary root method and it worked, Busybox is there, in the xbin (not the bin) and the Leds-u-ctrl works flawlessy

RockitOut11 said:
so, where is the 6.1.1.B.1.10 Kernel Sources from Sony?
pretty sure they'll help
---------- Post added at 12:38 PM ---------- Previous post was at 12:37 PM ----------
btw, i rooted my XU with latest Binary root method and it worked, Busybox is there, in the xbin (not the bin) and the Leds-u-ctrl works flawlessy
Click to expand...
Click to collapse
I am using for base the kernel.sin from .10 ftf!

RockitOut11 said:
so, where is the 6.1.1.B.1.10 Kernel Sources from Sony?
pretty sure they'll help
---------- Post added at 12:38 PM ---------- Previous post was at 12:37 PM ----------
btw, i rooted my XU with latest Binary root method and it worked, Busybox is there, in the xbin (not the bin) and the Leds-u-ctrl works flawlessy
Click to expand...
Click to collapse
could you just for the fun go into a shell emulator and type "ash" (without quotes)
it will most likely tell you " not found "
LUC does work, but the speeds are wrong, all blinking is ~10x faster then on GB as the speed-regulation script cannot function with ASH.
For now not a problem, but am working on version 2.0 which will blend from color to color.. and that one completely disfunctions on all ICS roots (not only with me, but also the beta testers)

Related

[ROM] Stock Froyo FRF91 Stock with optional root and addons pack (oc kernel)

So this is totally stock FRF91 flashable using a custom recovery. I have also included a root update.zip and an addon pack with cyanogenmod 2.6.34 kernel and hudge apn list.
Click here to get it​
Have you seen anything new FRF 91
jlevy73 said:
Have you seen anything new FRF 91
Click to expand...
Click to collapse
Good lookin' out
Seriously, what would I do if I got a completely finished product.
It is a security update
can i install this on my rooted 85B?
dirwdirw said:
can i install this on my rooted 85B?
Click to expand...
Click to collapse
Yes, but nandroid backup first just in case
Nice job man. I was gonna start on it, but no need to now.
Nice job man
thank you very much
great job!
worked for me upgrading from
FRF85
Cyanogen Mod 5.0.8 N1
thanks...
Quick questions, (if asked before, sorry) I have FRF83.
If I have RA recovery, I just flash it from there?
Same way with the root zip?
what25 said:
Quick questions, (if asked before, sorry) I have FRF83.
If I have RA recovery, I just flash it from there?
Same way with the root zip?
Click to expand...
Click to collapse
Yes. At least it works for me that way. I upgraded from FRF85 though
Thanks a lot for the quick update Lox
Works great for me.
Anyone can put the files on other mirror? Rapidshare says:
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
Thanks.
this update made me lose root good thing i did a backup lol
shortdawg24 said:
this update made me lose root good thing i did a backup lol
Click to expand...
Click to collapse
If you used a custom recovery then you have to apply the root.zip.
Sent from my Nexus One using XDA App
Nice job, thank you very much
i get that OTA link if im on ERE27 =/ WTF!? I never was on FRF50, nor will be (hopefully).
/cache/signed-passion-FRF91-from-FRF50.836691a1.zip
should i update anyways?
There is some problem in the CM addons binaries which you have in /system/xbin. For example, when I try to run nano, I get this error:
Code:
link_image[1995]: failed to link nano
CANNOT LINK EXECUTABLE
Same error on trying to run powertop. I think it would similarly affect all the binaries in that zip.
EDIT: OTOH, some binaries like ssh and bash are running without problems.
@Lox_Dev Does this also have the Holiday boot splash screen? I wonder why the FRF85B I got from you had one. Did you put it there yourself or was it really included by Google?

[Kernel] Cyano Ace Kernel by ketut

hi as i could see most of bugs with Cyano Ace was because of kernel we had .
here is a development thread just for dev's . so users please do not post .
New Kernel blackhawk
UPDATE:
- WiFi MAC address fix
- Superuser.apk and su updated
- CWM Manager
- BLN support, lights.cooper.so updated
- WiFi module included
- camera library included
http://forum.xda-developers.com/show...00&postcount=3
TO KETUT :
tested and the bug :
ketut : after installing new kernel Root is ok . Ext4 are ok . but if i use your modified light.cooper.so i will loose Proximity sensor , and if i use cooliya's one i will loose lights on the capacitive keys !
Old Version
Cyano Ace Original Topic :
[Rom] BehradGH Rom Series | Cyano Ace Port 7.1 by Me [ Public Release Available ]
to Ketut : you made a kernel and it was good but we had some problems with it .
1. Root and Super user
2. Proximity Sensor do not work
3. backlights do not work
Untested Cyano Ace port compatible boot.img. ext4 support compiled as modules, rfs and fsr support taken from DXKPB boot.img.
You need DXKPB WiFi module.
Click to expand...
Click to collapse
thanks for your effort, currently downloading it, will try later.
one question, how to install boot-cm.img? in Odin? or by CMW?
please advise, appreciate your true effort for this =)
UPDATE:
- Buttons light workaround fix (sometimes still keep lit after brightness set, lock and unlock your device to turning it off)
- 122MHz minimum frequency including in smartass governor
- BT MAC address fix
- Sensors fix but wrong direction compass
- I/O tweaks, compcache and swap support
- tun and cifs kernel modules
- Complete delete (including data) and re-install Superuser.apk and su binary
- Mount /system read-only by default
- No need to install cm-7.1.0-blackhawk-update.zip
Thanks to psyke83 - MAD Team Developer - Samsung Galaxy 5 CyanogenMod port maintainer. I use his work as a reference, I also have a Galaxy 5
Thanks to coolya for the button backlight workaround fix.
--
UPDATE:
- WiFi MAC address fix
- Superuser.apk and su updated
- CWM Manager
- BLN support, lights.cooper.so updated
- WiFi module included
- camera library included
--
Tried this kernel on Grif_07's CM, ar6000.ko and lights.cooper.so replaced. Wifi, bluetooth, backlight and button leds including BLN works!
UPDATE:
Including Portable Wi-Fi hotspot!
ketut.kumajaya said:
Tried this kernel on Grif_07's CM, ar6000.ko and lights.cooper.so replaced. Wifi, bluetooth, backlight and button leds including BLN works!
UPDATE:
Including Portable Wi-Fi hotspot!
Click to expand...
Click to collapse
I would love it if you could compile it into a kernel
Sent from my GT-S5830 using XDA App
What about root and super user problems?
---------- Post added at 09:04 PM ---------- Previous post was at 09:03 PM ----------
CF Root B82 - EX works good with SU and Root ! but no WiFi Bluetooth and ... !
BehradGH said:
What about root and super user problems?
---------- Post added at 09:04 PM ---------- Previous post was at 09:03 PM ----------
CF Root B82 - EX works good with SU and Root ! but no WiFi Bluetooth and ... !
Click to expand...
Click to collapse
It would be great is someone can extract the su from cf-root and then replace the su in this kernel
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
I would love it if you could compile it into a kernel
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
boot image (boot.img) = initramfs (ramdisk.gz) + kernel (zImage)
BehradGH said:
What about root and super user problems?
---------- Post added at 09:04 PM ---------- Previous post was at 09:03 PM ----------
CF Root B82 - EX works good with SU and Root ! but no WiFi Bluetooth and ... !
Click to expand...
Click to collapse
Still have no idea why su does not work
ketut.kumajaya said:
boot image (boot.img) = initramfs (ramdisk.gz) + kernel (zImage)
Still have no idea why su does not work
Click to expand...
Click to collapse
*stares for a long time*
Ohhhhhhh.....I think I get it ! X.X
Sent from my GT-S5830 using XDA App
I heard from fla.sh saying that he will edit boot.img for root .
He told me but I'm unsure whether that will work.
I'm sure that he is using Grif's version though .
Sent from my GT-S5830 using XDA App
Temporary solution for root access: "adb remount". I will fix the boot script problem ASAP.
ketut.kumajaya said:
Temporary solution for root access: "adb remount". I will fix the boot script problem ASAP.
Click to expand...
Click to collapse
Thanks a lot ketut , you helped so much
Sent from my GT-S5830 using XDA App
Waiting for new kernel from ketut.
BehradGH said:
Waiting for new kernel from ketut.
Click to expand...
Click to collapse
me too...
Proximity WORKS ! Just go to Settings>Call and enable Always use Proximity sensor.
djevrek said:
Proximity WORKS ! Just go to Settings>Call and enable Always use Proximity sensor.
Click to expand...
Click to collapse
Who say it does not work?
Digital compass is temporarily a problem now (in term of sensors).
Just waiting for ketut!
djevrek said:
Proximity WORKS ! Just go to Settings>Call and enable Always use Proximity sensor.
Click to expand...
Click to collapse
I can't find this option.
Sent from my Galaxy Ace with CyanoAce CM7.1 and XDA App
Guys, this topic is for the developers. Shut up and let them do their job.
I think a lot of things to fix, but root access is very important at this time
Changelog:
1. Root access fix
2. rfs filesystem support removed
Don't forget to press the Thanks button
Trixxta said:
Guys, this topic is for the developers. Shut up and let them do their job.
Click to expand...
Click to collapse
Yes, and also for bug reporting, which, you know, is part of development.
ketut.kumajaya said:
I think a lot of things to fix, but root access is very important at this time
Changelog:
1. Root access fix
2. rfs filesystem support removed
Don't forget to press the Thanks button
Click to expand...
Click to collapse
Excellent any chance we can have a new build uploaded taking in the fixes that have been expressed so far? Ideally in a completely new thread to the current KANG-Beta/CyanoAce and lock the old? It's starting to get really messy.
Apologies for posting that reply here but saves making a new post.
ketut.kumajaya said:
I think a lot of things to fix, but root access is very important at this time
Changelog:
1. Root access fix
2. rfs filesystem support removed
Don't forget to press the Thanks button
Click to expand...
Click to collapse
Thanks! Going to testing... and then update CM release )

Busybox

Hi I have a problem installing newer version of busybox..now I have 1 15 3 and installed on system/xbin and when I install newr version my phone freezes on boot logo..can someone tell me why this happens and how I can instal newer version of busybox???
Sent from my U20i using XDA App
Are you using a custom ROM? Custom ROMs for the X10 mini & mini pro use a chargemon shell script which is run using "busybox sh". I have seen some busybox versions around compiled without "sh". Maybe that is the problem. Try to call "busybox sh" in any terminal in your phone after updating busybox and before rebooting.
try stericson's app: https://market.android.com/details?id=stericson.busybox
thotypous said:
Are you using a custom ROM? Custom ROMs for the X10 mini & mini pro use a chargemon shell script which is run using "busybox sh". I have seen some busybox versions around compiled without "sh". Maybe that is the problem. Try to call "busybox sh" in any terminal in your phone after updating busybox and before rebooting.
Click to expand...
Click to collapse
Did you figure it out, i have the same version of busybox on Flame.E v0.2 with ZP kernel 1.6.3 and i wouldn't mind updating it. No reason in particular just coz lol..
Cheers,
Evil.
thotypous said:
Are you using a custom ROM? Custom ROMs for the X10 mini & mini pro use a chargemon shell script which is run using "busybox sh". I have seen some busybox versions around compiled without "sh". Maybe that is the problem. Try to call "busybox sh" in any terminal in your phone after updating busybox and before rebooting.
Click to expand...
Click to collapse
yes i'm on flame.E v.02..ok thank you really much..i'll start with SEUS and then i'll try...
HAHAHAHAH bricked for fourth time trying to install busybox 1.18.2!let's go again SEUS-root-clockworkmod installer and finaly custom rom!
chrisgall said:
HAHAHAHAH bricked for fourth time trying to install busybox 1.18.2!let's go again SEUS-root-clockworkmod installer and finaly custom rom!
Click to expand...
Click to collapse
Ohh thats a shame.
MiN Clipped Stock Eclair 2.1.1.C.0.0
Stock 2.1.1.C.0.0 w/ Root
dr.norton said:
MiN Clipped Stock Eclair 2.1.1.C.0.0
Stock 2.1.1.C.0.0 w/ Root
Click to expand...
Click to collapse
Its not that we want a rom with newer busybox, we want the new busy box to run on our roms that we use already. thanks for your help tho.
Cheers,
Evil.
chrisgall said:
let's go again SEUS-root-clockworkmod installer and finaly custom rom!
Click to expand...
Click to collapse
evilbarcode said:
Its not that we want a rom with newer busybox, we want the new busy box to run on our roms that we use already. thanks for your help tho.
Cheers,
Evil.
Click to expand...
Click to collapse
which rom you've installed via seus?
btw, MiN is a stock rom with cwm, so you don't have to follow seus+root+cwm route
as i wrote before, stericson's application does the job. if you don't like the idea of installation an app for it, just install it once then rip busybox as the newest appropriate version and keep it for future.
cheers
dr.norton said:
which rom you've installed via seus?
btw, MiN is a stock rom with cwm, so you don't have to follow seus+root+cwm route
Click to expand...
Click to collapse
Good point didnt think of that. My bad lol
as i wrote before, stericson's application does the job. if you don't like the idea of installation an app for it, just install it once then rip busybox as the newest appropriate version and keep it for future.
cheers
Click to expand...
Click to collapse
We are trying to get the new busybox to work on Flame.E v0.2 but it keeps bricking the device. I have tried stericsons and it did not work. Phone bricked.
Cheers,
Evil.
btw, i haven't realized that you have x10 mini pro, sorry. if you need a rom like MiN somehow, take a look to pfonck's clean rom.
dr.norton said:
btw, i haven't realized that you have x10 mini pro, sorry. if you need a rom like MiN somehow, take a look to pfonck's clean rom.
Click to expand...
Click to collapse
yeah i already did lol, but for me its not so bad coz i made a backup of my stock with root and cwm and flash that to save me time. then i get to start from scratch from my vendors original fw before going custom. so its all gravy in the navy.
But the original problem is cant get a newer version of busybox running on Flame.E
It wont let us do it, always brick device.
Cheers,
Evil.

[KERNEL] [ICS] [Stock WIFI restore] Stock ICS with init.d support+root+cwm! [25 May]

Latest Kernel mod -> Go Here
Based on 4.1.B.0.431 ICS 4.0.4 Kernel, features new CPU governors and autoroot.
Q. Who would benefit from this?
Those who want to stick to stock kernel for Official ICS (4.1.A.0.562), but would still want to get the benefits of init.d scripts, and native root access!
I personally feel ICS stock kernel is more battery friendly than Night-elf RC2 kernel.
Q. Features?
- init.d support (credits DooMLoRD for showing the way)
- ro.secure=0 (that is now adb has native root access!)
- clockworkmod 5.5 (credits Night-elf)
- no other changes to stock kernel
Download
boot_ICS_plus_v5.img
Changes: Previous features +
1. Switched to Doomlord's arc ics recovery (better features)
2. Important bug-fixes. (Please update!)
boot_ICS_plus_v4.img (updated 2012-05-19)
Changes: Previous features +
1. Perfect ADB connection in recovery.
2. Short vibrate on entering recovery added
boot_stock_ICS_initd_root_cwm_v3.img
Changes: Now restores stock WIFI modules (so you can directly flash from Night-elf kernel without losing WIFI!)
Those who are using v2 without problems do not need to update!
boot_stock_ICS_initd_root_cwm_v2.img
Changes: CWM 5.5, with ADB & USB mount (credits Night-elf)
Q. How to install?
Just as you install a custom kernel.
If no wifi, just delete "modules_version" and "modules_reversion" in "/system/lib/modules" and reboot
Steps:
1. Follow this guide to install official ICS + root
(Do not install CWM)
2. If you already have DooMLoRD/nAa CWM, go to /system/bin with any root explorer and delete recovery.tar and chargemon
3. Power down device and get into FASTBOOT MODE -> switch off device hold menu key & plugin usb. (LED notification turns BLUE)
4. check fastboot with "fastboot devices"
5. flash boot image
fastboot flash boot boot.img
6. Reboot with "fastboot reboot"
7. Enjoy!
Nice job!! Thanks!!
sent from my digital typewriter
Why not add recovery and busybox ?
adridu59 said:
Why not add recovery and busybox ?
Click to expand...
Click to collapse
Plan to add su, superuser.apk and busybox in v2
But solutions for all these exists, so not in a hurry..
shardul_seth said:
Plan to add su, superuser.apk and busybox in v2
But solutions for all these exists, so not in a hurry..
Click to expand...
Click to collapse
Just extract Night-Elf ramdisk and use it. I was planning on doing it in fact.
shardul_seth said:
Plan to add su, superuser.apk and busybox in v2
But solutions for all these exists, so not in a hurry..
Click to expand...
Click to collapse
That would be nice too.
Most important is CWM recovery.
Don't want to add it manually after flashing rom..
Yeah would be nice to see recovery, cause system recovery doesn't allow to mount sdcard in recovery mode, moreover adb cannot see phone in system recovery.
adridu59 said:
Just extract Night-Elf ramdisk and use it. I was planning on doing it in fact.
Click to expand...
Click to collapse
NO, NO !! His ramdisk has installer for his WiFi modules!
Would have to modify his ramdisk anyway!
Night-elf kernel is good, but it is not from latest ICS sources, I feel battery drain is a little bit more than his GB kernel!!
ZduneX25 said:
Yeah would be nice to see recovery, cause system recovery doesn't allow to mount sdcard in recovery mode, moreover adb cannot see phone in system recovery.
Click to expand...
Click to collapse
Yes, very valid points indeed!!
@All: Any suggestions on which recovery to use?
shardul_seth said:
Yes, very valid points indeed!!
@All: Any suggestions on which recovery to use?
Click to expand...
Click to collapse
Same as nightelf's, 5.5.
His sd mount works using that one.
shardul_seth said:
NO, NO !! His ramdisk has installer for his WiFi modules!
Click to expand...
Click to collapse
I didn't know that (I failed reading features..), that's why my wifi doesn't turn on gotta restore stock modules asap.
shardul_seth said:
NO, NO !! His ramdisk has installer for his WiFi modules!
Would have to modify his ramdisk anyway!
Click to expand...
Click to collapse
Yep but that is no big deal. Make a diff patch for the new ramdisk (there shouldn't be much changes, and there is just a few files on the ramdisk...) + remove res/modules folder and launch entry from init.rc.
adridu59 said:
Yep but that is no big deal. Make a diff patch for the new ramdisk (there shouldn't be much changes, and there is just a few files on the ramdisk...) + remove res/modules folder and launch entry from init.rc.
Click to expand...
Click to collapse
Yep, already updated as you speak!! See first post..
To delete.
___________
Sent form awesome Neo V
shardul_seth said:
Yep, already updated as you speak!! See first post..
Click to expand...
Click to collapse
Good one, but no busybox ?
Why is it that every time i use NE's kernel i end up with no wifi when moving to another one? It's really annoying, ffs
Oh, and your kernel seems really fluid, had no issues on gaming, while i had on nightelf's and inteks'.
Because NE kernel has own wifi modules, which not working with other kernels.
Both this is not the NE kernel's topic.
Bozek said:
Because NE kernel has own wifi modules, which not working with other kernels.
Both this is not the NE kernel's topic.
Click to expand...
Click to collapse
Neither does he inform or provides the stock modules.
No idea what's worst, though.
Had to reflash my rom.
theredsonja said:
Neither does he inform or provides the stock modules.
No idea what's worst, though.
Had to reflash my rom.
Click to expand...
Click to collapse
theredsonja said:
Neither does he inform or provides the stock modules.
No idea what's worst, though.
Had to reflash my rom.
Click to expand...
Click to collapse
He did inform about difrent wifi moduls here is a quote from his op:
Night-Elf said:
Added Wi-Fi modules to ramdisk and script for modules autoinstall.
Click to expand...
Click to collapse
adridu59 said:
Good one, but no busybox ?
Click to expand...
Click to collapse
That, and su are included in all my ROM's

[CM9/MIUI][Hellraised]Online v5 [MIUI 2.7.6][Latest CM9 Nightly or RC]*7/23/12*

Thanks to ktoonzes, his flash-aholics tool and Kaffee4Eck for his ROM... I present to you...
Kaffee4Eck's Monsta CM9MIUI
ORIGINAL THREAD http://forum.xda-developers.com/showthread.php?t=1757876
ROM-Info:
- Based on Android 4.0.4 CM9 Latest Nightly / MIUI 2.7.6
- MIUI Launcher
- CRT-OF
- APN for almost all networks
- 3G/Data/Phone/Bluetooth/GPS/Audio/Everything
- ADFREE Hosts File to block Spam/Advertisements
- USB File Explorer
- WIFI Tethering and USB Tethering
- Inbuilt Root Permissions App
- Fluxi Kernel 7-17
- 3 Way Reboot (Hold Power Button)
- Multilanguage (I know some Apps are still not translated into all languages but coming soon in v2)
Kown Bugs:
- Need time to boot (CM9 some Probleme?/Bug?)
- No more known.
Download:
K4E_MONSTA_05
K4E_MONSTA_02
---> ThemeFix<---
( I don't think theme fix is needed in v5)
Credits to:
chillzz (For inspiration and some Files.)
Cyanogenmod (For CM9 Versions)
Xiaomi (For MIUI Versions and frustrated, confused times)
Kaffee4Eck and his My family
---> Follow Kafee4Eck on Twitter for all News and coming Updates/Versions. <---
As always please thank and donate to all the devs that make this possible... I don't ask for donations just hit the thanks button if you like the ROM
Sounds good but can you tell me the difference between this one and cmiui? Are you keeping both updated?
---------- Post added at 10:11 PM ---------- Previous post was at 09:34 PM ----------
Tried loading this. Got the Status 7 error. I see all the build props say GT-I9100. you may want to fix that. Im on CM9. Ill try again after the fix.
REOGrand said:
Sounds good but can you tell me the difference between this one and cmiui? Are you keeping both updated?
---------- Post added at 10:11 PM ---------- Previous post was at 09:34 PM ----------
Tried loading this. Got the Status 7 error. I see all the build props say GT-I9100. you may want to fix that. Im on CM9. Ill try again after the fix.
Click to expand...
Click to collapse
just flash a ROM like shostock that well change you're build.prop to an i9100. Or modify the build.prop.of the ROM you're flashing then flash it. I believe you can prevent it from checking.
Sent from my SAMSUNG-SGH-I777 using Tapatalk 2
Ok Ill give it a shot. I already have Sho on my puter so that will be easy enough.
downloading!
Hello,
May I know the difference between this and cMIUI?
REOGrand said:
Sounds good but can you tell me the difference between this one and cmiui? Are you keeping both updated?
---------- Post added at 10:11 PM ---------- Previous post was at 09:34 PM ----------
Tried loading this. Got the Status 7 error. I see all the build props say GT-I9100. you may want to fix that. Im on CM9. Ill try again after the fix.
Click to expand...
Click to collapse
Please reinstall Kernel or use an other Kernel. Status 7 Error comes most of the times from a bricked CWM. Dont worry this cant brick ur Phone completly. ^^
---------- Post added at 01:20 PM ---------- Previous post was at 01:18 PM ----------
bb_hershey said:
Hello,
May I know the difference between this and cMIUI?
Click to expand...
Click to collapse
Difference is updated MIUI and always latest CM9 nightly. cMIUI do a great job.
I only started it to get more performance, stability and smoothness. I do my best to fix all problems. ^^
Nice work, I'm surely gonna try .
Status 7 error has nothing to do with kernel.
updater script is looking at build.prop for model #.
edit updater script check for build ID.
Something like that. Google it.
MotoMudder77 said:
Status 7 error has nothing to do with kernel.
updater script is looking at build.prop for model #.
edit updater script check for build ID.
Something like that. Google it.
Click to expand...
Click to collapse
^^^ this. You can either do what Moto suggests, or if you're not technologically inclined, just flash any Rom based on an 9100 firmware like shostock 2 (now version 3) and then wipe and flash this. It'll update your build.prop to show i9100.
Sent from my SGH-I777 using Tapatalk 2
Well mickymauz is obviously a fan of CM/MIUI's
Btw, you're totally not updating this. You have version 2, Kaffee is now on version 5.
VanillaCracker said:
Btw, you're totally not updating this. You have version 2, Kaffee is now on version 5.
Click to expand...
Click to collapse
Really?... I totally missed it... I'll probably update the new version later this eve... Thanks for the heads up!
Sent from my SGH-I777 using Tapatalk 2
OP updated with V5... sorry guys I missed a few versions... The original thread changed names and it threw me off... enjoy!
Nice runninnng rom!! Loaded with all the apps most use, stable n complete!!
Thanks Mick!!
Sent from my SGH-I777 using XDA App
Running this. :3 Getting random crashes. Not to often, not sure if only me or if other people have this occasional problem. Also does anyone still make GB MIUI I miss being able to theme the Framework and Status bar in one click of a theme.
The Boxinator said:
Running this. :3 Getting random crashes. Not to often, not sure if only me or if other people have this occasional problem. Also does anyone still make GB MIUI I miss being able to theme the Framework and Status bar in one click of a theme.
Click to expand...
Click to collapse
Try the other Samsung miui.
miui v4 rom / flexreaper
Think I am gonna switch to WIUI XD I love the theme's far too much <3 Thanks again

Categories

Resources