Reverting to Gingerbread from ICS - Atrix 4G Q&A, Help & Troubleshooting

I've been having some issues with constant reboots and phone signal strength after installing ICS. I have tried both methods (fastboot flashes and CWM flash) and still have the same problems.
Unfortunately, I'm a newbie, and was an idiot and did not create a backup.
I would like to be able to revert to the last stable official Gingerbread. Any recommendations on version to revert to? I'm been searching here for hours, and every time I think I find a good thread on how to do this, the links to the files are all dead.
Can someone please steer me in the right direction.
Also, again, I am willingly admitting that I'm an idiot for not making the backup in the first place. I saw that so many people were having no issues at all, so I assumed I would not either.
Thanks.

slim26 said:
I've been having some issues with constant reboots and phone signal strength after installing ICS. I have tried both methods (fastboot flashes and CWM flash) and still have the same problems.
Unfortunately, I'm a newbie, and was an idiot and did not create a backup.
I would like to be able to revert to the last stable official Gingerbread. Any recommendations on version to revert to? I'm been searching here for hours, and every time I think I find a good thread on how to do this, the links to the files are all dead.
Can someone please steer me in the right direction.
Also, again, I am willingly admitting that I'm an idiot for not making the backup in the first place. I saw that so many people were having no issues at all, so I assumed I would not either.
Thanks.
Click to expand...
Click to collapse
I recommend you the ROMs NottachTrix, it has Aroma installer and lets you configure it to your own taste. Guess this one is the best, if not you could go with a stock GB, search for fruitcakes (don't like them because the bloatware).
I'm assuming that you already have or know how to install a recovery. If it's not the case, let me know and I'll help you.

Thanks. I have CWM loaded so I shouldn't have an issue.
I think I would have the best luck with a stock ROM for now. The problem is finding a stock unlocked ROM for GB that still has a valid link. 90% of the links I'm coming across here including fruitcakes are all dead links.

http://samcripp.com/files/
you can find fruitcakes here. works from your phone or computer.
be sure to thank Sam Cripp for hosting the files for us. and the project in the first place.

Thanks. I was able to restore back to GB, but unfortunately still have the same signal strength issues.

have you tried to flash a new radio? there are plenty of radios on that website as well.

Related

Unrooting and downgrading G2 touch

Hi there, just got a question that i'm hoping somebody can answer for me.
Currently i'm running a Villain 4.0 Custom Rom on my phone. I'm now thinking of selling my Hero and upgrading to the desire.
I don't want to sell the phone in it's current state (i.e rooted with custom Rom), with no disrespect to the devs behind the ROM intended as they have done an excellent job, it does have battery life issues.
My questions are that to go back to its original state i.e a T-mobile G2 Touch is it a simple case of following the unlockrs guide http://theunlockr.com/2009/10/03/how-to-unroot-the-htc-hero/??
If so once reverted back to 1.5 stock will the person buying be able upgrade to 2.1 via the official route once it is released?
one more thing, does reverting to stock 1.5 have any issues? i've heard somewhere that GPS doesn't work if done.
Thanks for your patience in reading this long post and hopefully somebody can answer.
Cheers
install one of these: http://forum.xda-developers.com/showthread.php?t=559622
and your phone will be "as first day"
I mean: ROM will be a "retail" one, radio, recovery image and SPL will be changed back to "official one"
ps: I don't think is a good idea to do this: HBOOT will changed and the next phone owner won't be able to install custom recovery, root and, ... since fastboot exploit is not anymore present. you should just install a stable SenseUI ROM that way rooting and other fun things will still be possible
install a stock generic rom, for example from here the HTC Generic 2.73.405.66 unrooted version. flash the latest radio before, this way you can make sure the gps works afterwards. then boot up the rom, check if everything works, go to recovery, wipe all, shut down the phone and put it in the box.
if you install any RUU the buyer has to go through the process of rooting again, wouldn't be nice imho.
and next time please check the subforum you are posting in, this was the wrong one...
Thanks for the replies guys
i think you're right, leaving the phone rooted would be the better option for the new buyer saving him the pain of the dreaded Gold card method.
I'll probably flash one of modacos roms. Now, since i'm only a noob on android and as i've understood from your posts, gps wont work. What do i need to do to get it to work? how do i flash different radios? is it before a rom flash or after?
@kendong2, sorry man i thought i was posting in the right forum, for future note where should i post a thread like this? Cheers.
Yeah, don't go down the process of installing an RUU.
Follow Kendong's instructions to the letter.

ROM Issues

I have been experiencing ROM issues and of course this is the first time for me downloading ROMS; so please, I am not trying to live in ignorance. In fact, the opposite. I have done the research, checked multiple sites, blah, blah, blah.
I downloaded the latest version of CWM Pro Version. I backed up my current ROM and looked at some of the latest and greatest ROMS. I downloaded the SkyRaider Zeus ROM and liked it, but could not receive or make phone calls. I downloaded another ROM and the same issue. Plus, I had multiple issues with the certain apps not working (for example, LOCALE would open and close).
So, I reverted back to my stock ROM, which I like, but I keep having those annoying "updates" trying to download. Then, I also read on XDA...
ClockworkMod Recovery: The recent "5.x" update of ClockworkMod Recovery (CWR) has known issues. Particularly, it does not restore backups and will enter into a bootloop. For the time being, do NOT update to this version CWR and do NOT use Rom Manager to backup, flash ROMS, or restore backups because in order to perform these operations, CWR needs to be current. Links to how-to and alternate recovery images will follow after I've slept, drank some Jack, and further manipulated my mind into cooperating with reality.
So, some of you more experienced with Android could answer some questions...
Has this issue with CWR been taken care of?
Are these common problems with ROMS?
Will flashing a ROM in recovery take care of these issues?
Any help would be greatly appreciated! Thanks everyone!
Living by Faith in Christ,
Ryon
First off, never install a ROM in bootloader, you will brick your device.
I personally prefer to download the ROM from a forum, then place on sd card then manually go into recovery and flash it. I have never had a problem doing it this way.
Ah man! I used the wrong terminology. Thanks for setting me straight. I changed my first post so that people could answer the questions correctly in the future!
Any other wisdom out there would be great!
Ryon
RyonAdcock said:
Has this issue with CWR been taken care of?
Click to expand...
Click to collapse
Yes. Everything should be working correctly as of 5.0.2.1.
Are these common problems with ROMS?
Click to expand...
Click to collapse
Yes. If you did not flash the appropriate radio for that ROM (which from the description you gave is probably your problem). That may also be what is causing Locale to close depending on what it checks on startup. Remember, radios are flashed in bootloader and roms in recovery.
Will flashing a ROM in recovery take care of these issues?
Click to expand...
Click to collapse
No, you need to download a radio that is suggested for use with the ROM.
At this time, most use MR2-latest but the ROM threads should recommend one in their description.
Thanks for the quick reply! As with answered questions come more questions.
Could you help me understand the theory behind radios? I am not quite sure why the radio needs to be changed.
Also, what is the common program or app that most people are using to update or change their radios? I have heard of a few, but would like more wisdom.
Thanks again!
Ryon
RyonAdcock said:
Thanks for the quick reply! As with answered questions come more questions.
Could you help me understand the theory behind radios? I am not quite sure why the radio needs to be changed.
Also, what is the common program or app that most people are using to update or change their radios? I have heard of a few, but would like more wisdom.
Thanks again!
Ryon
Click to expand...
Click to collapse
Radios need to be changed since the 4g devices can't use *228 to update roaming like 3g devices. If you had a TB on froyo you will need to update radio prior to root cause you won't signal after you flash your first Rom or after flash you better have WiFi or be near a computer or you won't be able to use ur phone.
Sent from my Thunderbolt using XDA App

[Q] No 4g/3g, only data through wifi

A couple weeks ago, I decided it was time to root my phone, since I missed running the custom ROMs on my Droid. So I unlocked it and rooted it and everything went all fine and dandy. I decided for my first ROM, I would flash Xtreme Outcast's ICS ROM (v2.0, I think). When I first flashed it, my data worked fine (however downloading apps from the market gave me some issues, but I think that was another problem..). However, before long, like later that day, the 4g and 3g stopped working. After it stopped working, I decided to try to restore my nandroid stock ROM, but when I went back to it, not only did the 4g and 3g not work, the wifi just said 'error' when I tried to turn it on. So after that, I tried to flash the GB OTA RUU, but that gave me some issues, but I've figured out where that went wrong (mainver error).
Anyway, what I'm trying to figure out is what I can do to try to fix the issue. My mobile data IS on, the battery cover IS on, and the SIM card is inserted and, to my knowledge, working just fine. Would flashing an RUU help? Am I just having bad luck with this ROM and need to flash a different one? Should I update to the new RUU? Any help would be fantastic, and I'd award you 456789876435974 awesome points!
Sounds like you may have had a bad ROM zip. I would try re-downloading the ROM and re-flashing making sure you wipe all/factory reset first. If that works and you are feeling adventurous, I highly recommend Scott's ROMs new CleanRom 4.1 which requires an RUU. Check out his web site and developer thread here for more info. I took the leap and love it.
woodyt74 said:
Sounds like you may have had a bad ROM zip. I would try re-downloading the ROM and re-flashing making sure you wipe all/factory reset first. If that works and you are feeling adventurous, I highly recommend Scott's ROMs new CleanRom 4.1 which requires an RUU. Check out his web site and developer thread here for more info. I took the leap and love it.
Click to expand...
Click to collapse
Thanks for the response, but do you think it was just a bad flash if it affected the stock nandroid backup too? I will try flashing a new ROM soon either way, though. Is it possible to download an older version of CleanRom? I can't find a link on the first page of the thread, though I might have just overlooked it. I'm just not sure if I want to update to the new RUU right now, but if there are no other options, I might just pull the trigger on it.
Go to Scott's ROMs web site and you can download ISCE 3.7 which is still on the old firmware so no RUU needed. His roms are pretty slick and he provides great support.
Good point on the nandroid so I'm not sure what's going on. Hopefully the new ROM flash helps.
Well, I flashed the ICS RUU, and now my data works! but now...I can't get my phone to root. Is there a guide for rooting on the new RUU?
CollinswithanS said:
Well, I flashed the ICS RUU, and now my data works! but now...I can't get my phone to root. Is there a guide for rooting on the new RUU?
Click to expand...
Click to collapse
It is just easiest to install and ICS new firmware ROM that is already rooted.
There is however a couple of thread in the development forum on rooting and there is an ICS root tool there

SD card required?

Hey, im new here, and completely new to the whole "custom rom flashing" thing.
I would like to get into rooting my phone and then installing a custom rom like resurrection for example, but I have a couple of questions.
1. Do I need an SD card in my phone, to be able to root my phone/install custom roms? or can I just use the phones internal 16gb memory?
2. Would someone be kind enough to point me to a guide to rooting/installing custom roms for complete newbies like myself? I have searched the forums, but theres so many threads about different stuff, like clockworkmod/odin/cyanogenmod etc, my head is completely boggled. I just don't know where to begin with any of it.
Cheers.
1) No.
2) Everything you need to know is in the Stickies.
MistahBungle said:
1) No.
2) Everything you need to know is in the Stickies.
Click to expand...
Click to collapse
1. No you cant root without an SD card? or No you don't need an SD card? elaborate please.
2. Nothing in that thread helps someone like me who is totally new. I don't know what any of it means. Surely there is a simple guide that explains exactly how to root your phone, without linking you to 7 other threads in the process? That's all I've found up until now.
This requires sdcard
http://forum.xda-developers.com/showthread.php?t=1501719
This doesn't
http://forum.xda-developers.com/showthread.php?t=1103399
Thanks, thats what I was looking for.
One more thing, just so I dont make a mistake, could you tell me which kernel to download? my kernel version is 3.0.15-I9100BVLPB-CL310231
cheers.
Read the bit in bold read which says 'Help ! Which file do I use ?'. This short section answers your question exactly.
ok well i tried CF-Root-SGS2_XX_OXX_LPB-v5.2-CWM5-PROPER.zip and my phone no longer boots....
tried CF-Root-SGS2_XX_OXX_LPB-v5.2-CWM5.zip and I get the same thing, so im stuck now. great.
I can get into CWM recovery, but I have no idea how to copy the rom I want to use onto the phone when its in recovery mode. This is something that is just not explained anywhere
help?
Right. In order of importance:-
1) No bumping threads within 37 minutes. Not cool. This is not your personal tech support forum.
2) You're having problems. Why ? Who knows. We're not there looking over your shoulder so we have no idea exactly what you did. I suspect you're having problems because you are in too much of a hurry/took shortcuts & didn't do what was suggested immediately after your OP.
3) However...Given the situation you find yourself in, I recommend you do one of two things:-
A) If you are absolutely sure you have CWM Recovery & not Android recovery (I say this because if your phone isn't booting normally, that normally means the flash didn't work & normally CWM wouldn't be successfully installed either), follow whatever instructions the rom you're wanting to flash has.
Every single rom on here has flashing instructions, normally on the first post on the first page of the thread on here devoted to the rom. If you can't be bothered reading those, I can't help you.
or
B) Go to Samfirmware.com. Search for the firmware that was on your phone before you tried to root it. Download this firmware. Flash the firmware you download following the instructions here. If you also end up with a .dll file, bin it. You don't need it. This will give you a clean install of stock. From there, I strongly suggest you read the CFRoot thread very carefully before you attempt to root your phone again. I also strongly recommend you read the Stickies linked to above, so you have some sort of understanding around what's what with this phone.
If you don't, being a betting man, I'll wager there's a fair chance you'll find yourself in the situation you currently find yourself in again (best case scenario), or worst case you'll end up with a 135gm paperweight as many people have on here over the past few days.
It's all up to you now. Your phone's destiny is in your hands.
Thanks for the reply, much appreciated.
Sorry for bumping, I panicked a little when my phone wouldnt boot. I just expected it to work because I have done things like this in the past and never had problems. Im a pretty tech savvy person really, im just new to android.
I wish it was as simple as reading one thread, but there are dozens of different threads on how to root this phone, and different methods, its extremely confusing.
Im downloading the stock kernel now (300+mb for some reason, and its going to take over an hour to download)
Once I get my phone back to normal, I'll read through some more threads and try and get a better understanding on how to root my phone.
I had it rooted properly as the recovery mode stated CWM in the corner, I think the issue I had was not being able to copy the rom I wanted to use, onto the phone, because I dont have an SD card.
Anyway, thanks for the help, and fingers crossed I can at least get my phone to boot again.
Man, I've never come across anything so complicated in all my life lol.
Edit: Sorted! Flashed back to original kernel and its working as it was before I started. Thanks very much for your help mate, and at least now I know how to restore my phone if I mess it up again in the future.
just thought I would update this thread and say I finally accomplished what I wanted.
Incase anyone is wondering, this is what I did:
Restored my phone back to factory settings/firmware/kernel
Booted the phone up, and copied my rom of choice to the internal memory via USB connection, and enabled debug mode.
restarted in download mode and flashed cf-root kernel (ended up with bootloop)
went ahead and installed the rom via clockwork recovery (creating a backup first)
The phone now boots into the rom im using (Resurrection Remix)
So if anyone is a little worried by getting the bootloop (but can still get into clockwork recovery) try flashing your required rom. Your phone may boot fine with new rom anyway. Mine did.

[Q] Looking to move from Alliance 26 to DN3 5.2 NEED HELP PLEASE

As the title says, I'd like to flash Ditto Note 3 ROM v5.2. I am currently running Alliance ROM build 26 with TWRP 2.7.2.0.
What I'm looking for is a basic step-by-step (I feel pretty confident about finding detailed breakdowns of each step so please don't put yourself out too much--I'll follow up if there's anything I don't understand) so that there's nothing I miss, leaving me with a bricked phone, a locked bootloader that I can't revert, or non-functional radio/modem/anything.
I'm fine with ODIN, flashing, recovery, and other basics. I'm really just looking for each step that is ABSOLUTELY REQUIRED in order to not run into the problems mentioned above. I'd like to be able to get back to where I'm at now in case I decide I don't care for DN3. Thank you in advance.
I've attached a screenshot of "About Phone" in case the info helps.
I've also never taken an OTA or used an OFFICIAL stock ROM except for the one it came with, I rooted and unlocked as soon as it was possible after day one of release with no updates/upgrades prior (pre-ordered from Verizon, first ROM was BeansTown build 1 ).
Is what I'm asking possible? Can this be done without relocking the bootloader?
Applejackson said:
As the title says, I'd like to flash Ditto Note 3 ROM v5.2. I am currently running Alliance ROM build 26 with TWRP 2.7.2.0.
What I'm looking for is a basic step-by-step (I feel pretty confident about finding detailed breakdowns of each step so please don't put yourself out too much--I'll follow up if there's anything I don't understand) so that there's nothing I miss, leaving me with a bricked phone, a locked bootloader that I can't revert, or non-functional radio/modem/anything.
I'm fine with ODIN, flashing, recovery, and other basics. I'm really just looking for each step that is ABSOLUTELY REQUIRED in order to not run into the problems mentioned above. I'd like to be able to get back to where I'm at now in case I decide I don't care for DN3. Thank you in advance.
I've attached a screenshot of "About Phone" in case the info helps.
I've also never taken an OTA or used an OFFICIAL stock ROM except for the one it came with, I rooted and unlocked as soon as it was possible after day one of release with no updates/upgrades prior (pre-ordered from Verizon, first ROM was BeansTown build 1 ).
Is what I'm asking possible? Can this be done without relocking the bootloader?
Click to expand...
Click to collapse
Since you are already using Alliance B26 (an MJ9 based ROM), you shouldn't need to use ODIN for anything.
I simply followed the instructions in the DN3 post, and I was up and running w/o issues.
I'm not sure about TWRP, bc I used the latest version of Philz myself, and had no issues. I've heard of some people not having issues with TWRP, and others who did. Seems like YMMV, based on all the posts I've gone through in that thread (you should go through it yourself and get an idea).
Also, I am having the odd lockup every so often with this ROM (I believe it is deep sleep based), which a few others are also experiencing. Outside of that, I love the ROM too.
Thanks for the reply.
devious_z said:
Since you are already using Alliance B26 (an MJ9 based ROM), you shouldn't need to use ODIN for anything.
I simply followed the instructions in the DN3 post, and I was up and running w/o issues.
I'm not sure about TWRP, bc I used the latest version of Philz myself, and had no issues. I've heard of some people not having issues with TWRP, and others who did. Seems like YMMV, based on all the posts I've gone through in that thread (you should go through it yourself and get an idea).
Also, I am having the odd lockup every so often with this ROM (I believe it is deep sleep based), which a few others are also experiencing. Outside of that, I love the ROM too.
Click to expand...
Click to collapse
Thanks for taking the time. I guess my main concern was with the bootloader and whether or not I had to upgrade it and possibly lock it accidentally, or if I could just stay with the bootloader I have now, which is actually VRUEMJB. Used the method outlined in the AllianceRom thread for flashing the ROM. Since I still have a virgin bootloader I didn't want to lock it. I think I'll just try flashing the ROM as I have it, after a wipe of course, and I can always flash a recovery backup if need be.
I did try looking through the info in the threads for the ROM, but there are thousands of pages on the original and 90+ in the [**UPDATED] Verizon DN3 thread. The ones that I have read through have some conflicting information, so this query is really just to eliminate any confusion on my part before changing anything I can't change back.
Update: Tried and failed.
Just an update, I tried with my current configuration as I said I would above. Factory Reset, Data Format, the whole nine yards, and everything seems to go smoothly until the final reboot after everything is installed. The phone just hangs on the Samsung boot image and never goes any further. Tried reinstalling twice after but always the same problem. I was able to flash my previous backup no problem, so no damage, but no joy either. Any ideas?
Applejackson said:
Just an update, I tried with my current configuration as I said I would above. Factory Reset, Data Format, the whole nine yards, and everything seems to go smoothly until the final reboot after everything is installed. The phone just hangs on the Samsung boot image and never goes any further. Tried reinstalling twice after but always the same problem. I was able to flash my previous backup no problem, so no damage, but no joy either. Any ideas?
Click to expand...
Click to collapse
I guess I would start with reinstalling the MJ9 firmware through odin, and then try the rom again. You mentioned you were actually on MJB earlier which doesn't sound right.

Categories

Resources