I saw this on the photon q4glte forums and o would like to know if it would work on my razr http://forum.xda-developers.com/showthread.php?t=1922956
Sent from my XT912
What ROM are you running?
Sent from my own CM10 ROM built from source
I was on stock 211 odexed
Sent from my XT912
BADDINOROX99 said:
I was on stock 211 odexed
Sent from my XT912
Click to expand...
Click to collapse
What recovery are you using because in safe strap you can't flash stuff in stock ROM
Sent from my own CM10 ROM built from source
v 2.11....quick question can I go from custom ROM to custom ROM without having to rsd everytime I want to change a ROM?
Sent from my XT912
BADDINOROX99 said:
v 2.11....quick question can I go from custom ROM to custom ROM without having to rsd everytime I want to change a ROM?
Sent from my XT912
Click to expand...
Click to collapse
Yes, just when you want to change ROMs, wipe data, cache partition, and dalvik-cache and then flash the ROM and the gapps
Sent from my own CM10 ROM built from source
kool thanks
Sent from my XT912
I just flashed it no it didn't work
Sent from my XT912
Related
I installed cm 10.1 over my stock rom via SS accidentally without having a backup... Now I`m running cm 10.1 on stock alot and slot 1, but only the slot one works (as supposed).
I had eclipse v4 ICS rom installed on stock, which i did via BMM, and now I`m not sure what to do.
Since the rom installed on slot 1 (cm 10.1) is working with no issues, I`m leaving it this way for a while, but I`d really like to clean up installations in future to install JB on stock with no slots, since I`d have more internal space available.
So the question is: What do I have to do to clean up my razr gsm and start over from a clean JB on stock slot (LATAM, isn`t released yet, right?).
And finally, should I face any issues if I install EU JB release?
Thanks in advance!
If you want to start fresh you have to go to stock recovery and full wipe, the flash your stock latam firmware of choice..
Sent from my XT910 using xda premium
Thanks! I should search for fastboot files, right?
kamikass said:
Thanks! I should search for fastboot files, right?
Click to expand...
Click to collapse
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
kamikass said:
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
Click to expand...
Click to collapse
i think the 6.7.2 one, because i flashed retail eu ics and the number is 6.7.2
Well, I`m trying 6.7.2-180_SLC-35_LATAM_SPYDERICSRETBRLA_ServiceCFC_fastboot.xml.zip... All I should do is restart phone on AP Fastboot, full wipe and flash it? (RSD?)
Btw, do I have to uninstall SS or delete rom slots?
kamikass said:
Btw, do I have to uninstall SS or delete rom slots?
Click to expand...
Click to collapse
Maybe yes
Sent from my GT-I9300 using xda app-developers app
Hi team
Thanks for the wonderful Stock ROM in the development. Section
Im having Moto Razr Maxx (XT910) with Asian Retail ICS 4.0 ROM.
& 3.0.6-g3c83d29 kernal.
I have activated Safe strape. 3.11 with slot0-Stock ICS 4.0
Slot1-Cyanogen mod 10.1 RC05
Slot2- tried Stock EU ROM as instructed. But getting blank screnn after reboot. !!!!
Can you pl. Help me to resolve the issue??
Let me tell you, I have not installed kernel as suggested. In this thread.....
Sent from my XT910 using Tapatalk 2
You must flash the JB kernel because that rom is Jelly Bean and you are still on ICS...
Sent from my Razr XT910
Thanks mate..
So I want to load JB kernel on slot2 right??
I have already downloaded specific JB kernel (ArtMod 14 number. Kernel) but its .image file hence not showing in safe strape'install' menu.
Bro. Can you please give more detail on how to load the same??
Im really fedup with the battery life On CM 10.1....pls. help....
Sent from my XT910 using Tapatalk 2
Pl. Help brothers!!!!
Sent from my XT910 using Tapatalk 2
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
demonshouter said:
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
Anybody. Plsssssssss... help
Sent from my XT910 using Tapatalk 2
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
I'm also using BMM that can flash boot.img directly. But I think you can do this guide: http://forum.xda-developers.com/showthread.php?t=2078021
CAREFULL: use just the kernel flashing part of the guide: fastboot flash boot boot.img
and be sure you flash the correct boot.img that you downloaded. you can download the right kernel from the other artur mode:http://forum.xda-developers.com/showthread.php?t=2260951
one more thing. I never done that after SS was installed. So better wait for others to confirm that it's OK before you actually doing this.
Maybe you can also try this tool to flash kernel: http://forum.xda-developers.com/showthread.php?t=2399385
He says it support any fastboot device.
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
hi all! i have some minor issues with the rom and i hope you can help me...
1. the phone (razr maxx) didnt charge while powered off
2. i cant seem to install the smart actions i so love!
does anyone have any idea to fix those?
sun1983 said:
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
sun1983 said:
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You don't have to erase your Cid if you are from Europe,otherwise yes.
And if this is your first time that you want to install some rom on System 2,you must activate the partition.
Here http://forum.xda-developers.com/showthread.php?t=2325764 are some video tutorials how to use BMM.
Sent from my Razr XT910
If I flashed kernel with BMM to system 2, will this kernel also impact on System 1 ??
Or System 1 and 2 will use different kernel ??
Thanks
on bmm there are several ROM slots but only one boot.img - kernel. so it does affect to other slots... fe. ics on stock and jb based on slot 2 ( to use ics u will have to flash old kernel back) . only kexec roms use their own one .
I have flashed cm10.2 on system 2 with JBX kernel, that's mean this kernel not affect stock kernel of stock jb on system ??
thanks
Sent from my Nexus 7 using XDA Premium HD app
williamlaw said:
I have flashed cm10.2 on system 2 with JBX kernel, that's mean this kernel not affect stock kernel of stock jb on system ??
thanks
Click to expand...
Click to collapse
I'm also interested in knowing that.
I think jbx won't impact the stock one (system 1) if you flash it on system 2 with bmm..
demonshouter said:
I think jbx won't impact the stock one (system 1) if you flash it on system 2 with bmm..
Click to expand...
Click to collapse
Correct!
Sent from my Razr XT910
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Cybercrat said:
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Click to expand...
Click to collapse
You should use BMM or Safestrap.
welder73 said:
You should use BMM or Safestrap.
Click to expand...
Click to collapse
Lol no worries, my english sucks too.
And thanks but what are the chances of brick it when flashing through android recovery or any custom recovery ?
Cybercrat said:
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Click to expand...
Click to collapse
I used BMM to run CM 10.2 as stock system and work fine
Sent from my XT910 using xda app-developers app
vince686 said:
I used BMM to run CM 10.2 as stock system and work fine
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hmm so i think im good to go
Thanks
Hello,
i want to flash jbx kernel to my stock droid razr
do you guys know if it works with stock?
http://forum.xda-developers.com/showthread.php?t=2223517
kekambas18 said:
Hello,
i want to flash jbx kernel to my stock droid razr
do you guys know if it works with stock?
http://forum.xda-developers.com/showthread.php?t=2223517
Click to expand...
Click to collapse
It works only with custom roms,don't flash it if you are using stock rom (JB 4.1.2).
Sent from my Razr XT910
ok, Thank you