Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Cybercrat said:
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Click to expand...
Click to collapse
You should use BMM or Safestrap.
welder73 said:
You should use BMM or Safestrap.
Click to expand...
Click to collapse
Lol no worries, my english sucks too.
And thanks but what are the chances of brick it when flashing through android recovery or any custom recovery ?
Cybercrat said:
Hi,
Can i flash PACman ROM - JB 4.3 on Stock rom slot. If its possible which recovery program should i use? CWM or TWRP?
Currently i'm using CWM touch based on SG3.
I took nandroid back up also. My device is Razr XT910, currently running ICS 4.0.4, and there is no scope of JB in india
Click to expand...
Click to collapse
I used BMM to run CM 10.2 as stock system and work fine
Sent from my XT910 using xda app-developers app
vince686 said:
I used BMM to run CM 10.2 as stock system and work fine
Sent from my XT910 using xda app-developers app
Click to expand...
Click to collapse
Hmm so i think im good to go
Thanks
Related
Hi there!
I am wanting to update my Samsung Galaxy GT-i9300 but am worried about the process because of having installed a custom kernel previously (would this muck up installing a new custom rom I wonder..)
Please find attached a screenshot of the settings and please tell me what I should do (if anything needs done) before I flash a new custom rom.
Cheers!
if you're worried about kernels, then just flash stock kernel then flash a custom rom on it.
mputtr said:
if you're worried about kernels, then just flash stock kernel then flash a custom rom on it.
Click to expand...
Click to collapse
kk, could you provide me with a suitable stock kernel (or links to one) which will be compatible with the rom I have installed?
any stock kernel that is for jb will be fine.
Sent from my GT-I9300 using xda app-developers app
mputtr said:
any stock kernel that is for jb will be fine.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I am on android version 4.0.4 (so technically not JellyBean). and its safe to flash a stock kernel for JB despite being on that version before I flash a custom rom?
Sorry for asking, get confused easily..
you should be fine updating with a custom kernel (as all roms flash a kernel as well). Just make sure you factory reset when moving from ics to JB as you will most likely encounter problems if you don't.
Sent from my GT-I9300 using Tapatalk 2
Asimo2012 said:
I am on android version 4.0.4 (so technically not JellyBean). and its safe to flash a stock kernel for JB despite being on that version before I flash a custom rom?
Sorry for asking, get confused easily..
Click to expand...
Click to collapse
I would suggest flashing ICS stock kernel first if you're worried. I thought you were already on jb.
Sent from my GT-I9300 using xda app-developers app
Easy
Reflash the stock ics ROM
And flash any custom ROM you want
Enjoy
Sent from my GT-I9300 using xda premium
Just about to flash a ROM on my S3 (first time), and I'm just asking are different version ROMs compatible with the stock version ROM? e.g: I have a s3 running Jellybean 4.1.1 (stock) but can I flash a different ROM that's made for ICS?
Thanks
Mountain_Lion said:
Just about to flash a ROM on my S3 (first time), and I'm just asking are different version ROMs compatible with the stock version ROM? e.g: I have a s3 running Jellybean 4.1.1 (stock) but can I flash a different ROM that's made for ICS?
Thanks
Click to expand...
Click to collapse
Just make sure, that your s3 version is made for the rom. If so you should be able to flash all roms. Why would you want to go back to ics?
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Just make sure, that your s3 version is made for the rom. If so you should be able to flash all roms. Why would you want to go back to ics?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
When you mean s3 version do you mean like GT-i9300 etc.? And so if it was made for that (GT-i9300), I would be able to flash any ROM?
yes
I installed cm 10.1 over my stock rom via SS accidentally without having a backup... Now I`m running cm 10.1 on stock alot and slot 1, but only the slot one works (as supposed).
I had eclipse v4 ICS rom installed on stock, which i did via BMM, and now I`m not sure what to do.
Since the rom installed on slot 1 (cm 10.1) is working with no issues, I`m leaving it this way for a while, but I`d really like to clean up installations in future to install JB on stock with no slots, since I`d have more internal space available.
So the question is: What do I have to do to clean up my razr gsm and start over from a clean JB on stock slot (LATAM, isn`t released yet, right?).
And finally, should I face any issues if I install EU JB release?
Thanks in advance!
If you want to start fresh you have to go to stock recovery and full wipe, the flash your stock latam firmware of choice..
Sent from my XT910 using xda premium
Thanks! I should search for fastboot files, right?
kamikass said:
Thanks! I should search for fastboot files, right?
Click to expand...
Click to collapse
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
Yes, just go to this link:
http://sbf.droid-developers.org/
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
kamikass said:
How do I know which is the latest Latam? Which is the difference between 6.5.1, 6.7.2 and 6.7.3? ICS, JB (4.1.2) and JB (4.2.2)?
Sorry for so many questions
Click to expand...
Click to collapse
i think the 6.7.2 one, because i flashed retail eu ics and the number is 6.7.2
Well, I`m trying 6.7.2-180_SLC-35_LATAM_SPYDERICSRETBRLA_ServiceCFC_fastboot.xml.zip... All I should do is restart phone on AP Fastboot, full wipe and flash it? (RSD?)
Btw, do I have to uninstall SS or delete rom slots?
kamikass said:
Btw, do I have to uninstall SS or delete rom slots?
Click to expand...
Click to collapse
Maybe yes
Sent from my GT-I9300 using xda app-developers app
Hey guys. I'm new to the Razr. I have it rooted and installed Safestrap recovery v3.11.
I have backed up my stock ROM and am now looking to install some custom ROMs.
I'm wanting to try out a 4.2.2 ROM... what, in your opinion, is the MOST stable 4.2.2 ROM at the moment?
RBarnett09 said:
Hey guys. I'm new to the Razr. I have it rooted and installed Safestrap recovery v3.11.
I have backed up my stock ROM and am now looking to install some custom ROMs.
I'm wanting to try out a 4.2.2 ROM... what, in your opinion, is the MOST stable 4.2.2 ROM at the moment?
Click to expand...
Click to collapse
try LiquidSmooth 2.2.1
2.1 version worked well to me, just that mms wasnt working. But I think it's just my phone. It's stable and smooth
I like either LiquidSmooth or Avatar they are both great for me.
I PAC man its stable and has a lot of customization
RBarnett09 said:
Hey guys. I'm new to the Razr. I have it rooted and installed Safestrap recovery v3.11.
I have backed up my stock ROM and am now looking to install some custom ROMs.
I'm wanting to try out a 4.2.2 ROM... what, in your opinion, is the MOST stable 4.2.2 ROM at the moment?
Click to expand...
Click to collapse
try droidrzr.com they have great support for CDMA verizon droid OG and Maxx devices.
I use Cyanogenmod 10.1 which is based on 4.2.2. However, it's still in its nightly phase so it's not officially stable yet. Use safestrap 3.11 for it.
Sent from my SCH-I535 using xda app-developers app
I'm running Liquidsmooth's ROM that is 4.2.2.
Very stable. I love it!
Sent from my XT912 using xda app-developers app
Hi team
Thanks for the wonderful Stock ROM in the development. Section
Im having Moto Razr Maxx (XT910) with Asian Retail ICS 4.0 ROM.
& 3.0.6-g3c83d29 kernal.
I have activated Safe strape. 3.11 with slot0-Stock ICS 4.0
Slot1-Cyanogen mod 10.1 RC05
Slot2- tried Stock EU ROM as instructed. But getting blank screnn after reboot. !!!!
Can you pl. Help me to resolve the issue??
Let me tell you, I have not installed kernel as suggested. In this thread.....
Sent from my XT910 using Tapatalk 2
You must flash the JB kernel because that rom is Jelly Bean and you are still on ICS...
Sent from my Razr XT910
Thanks mate..
So I want to load JB kernel on slot2 right??
I have already downloaded specific JB kernel (ArtMod 14 number. Kernel) but its .image file hence not showing in safe strape'install' menu.
Bro. Can you please give more detail on how to load the same??
Im really fedup with the battery life On CM 10.1....pls. help....
Sent from my XT910 using Tapatalk 2
Pl. Help brothers!!!!
Sent from my XT910 using Tapatalk 2
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
demonshouter said:
As far as I know kernel will be something like boot.img. I never use safestrap before. I don't know if safestrap has option to flash kernel. If it doesn't the you have to find zip flashable kernel not the img kernel.
Sent from my XT910 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
Anybody. Plsssssssss... help
Sent from my XT910 using Tapatalk 2
sun1983 said:
Thanks bro.
Yes, you are right... I need to flash .zip based kernel instead of .IMG file.
SS is not having facility to flash .img file....should I migrate from SS to BMM ??
Or are there any .zip based flash able kernel available for SS?
Can anyone please help me on this ??
Sent from my XT910 using Tapatalk 4
Click to expand...
Click to collapse
I'm also using BMM that can flash boot.img directly. But I think you can do this guide: http://forum.xda-developers.com/showthread.php?t=2078021
CAREFULL: use just the kernel flashing part of the guide: fastboot flash boot boot.img
and be sure you flash the correct boot.img that you downloaded. you can download the right kernel from the other artur mode:http://forum.xda-developers.com/showthread.php?t=2260951
one more thing. I never done that after SS was installed. So better wait for others to confirm that it's OK before you actually doing this.
Maybe you can also try this tool to flash kernel: http://forum.xda-developers.com/showthread.php?t=2399385
He says it support any fastboot device.
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
hi all! i have some minor issues with the rom and i hope you can help me...
1. the phone (razr maxx) didnt charge while powered off
2. i cant seem to install the smart actions i so love!
does anyone have any idea to fix those?
sun1983 said:
Thanks bro.. Ill surely try this
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
sun1983 said:
Friends,
This is what I understand after reading few relavent threads as given below
- First I need to backup my Stock ICS kernel and CID using BMM
- Then reboot phone, select System_2 froom BMM bootmenu ( as i want to install EU JB on System_2)
- In the BMM, I need to delete CID then flash Artmod EU JB kernel
- Then wipe cache, dalvik cache
- Now I have to flash EU JB ROM
- pl confirm : should I have to restore CID or not in last step?
Now I'll be on STOCK EU Jelly Bean 4.1.2 on my System_2 slot.... M i correct?
Pl. Guide... prompt response is highly appreciated...thanks
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
You don't have to erase your Cid if you are from Europe,otherwise yes.
And if this is your first time that you want to install some rom on System 2,you must activate the partition.
Here http://forum.xda-developers.com/showthread.php?t=2325764 are some video tutorials how to use BMM.
Sent from my Razr XT910