I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
I know there are hundreds of threads and articles posted about HD2s freezing with the lock screen but this issue seems different to me. My problem is that whenever I lock the phone the touch screen will freeze entirely. I thought a work around may be to install a different lock screen. After installing that I can get past the lock screen but the touch screen still is not responsive. I have no idea what to do. I already did a hard reset and it still does it. I would like to add that it is completely consistent. It happens every time without fail. In order to even use the phone I have to pull the battery and I get one use out of it before it locks and I have to pull the battery again. Does anyone have any suggestions? I would really appreciate it..
Update: I flashed the original ROM to my phone and the freezing problem still exists.. I have no idea what to do at this point.
Update 2: Narrowed down the problem to being the physical "power/end/lock" button. If I slightly press it but not fully it will go to the honeycomb style menu with all the apps. If I press it fully the screen will go out like normal but then if I restore it, the entire screen is locked up. Nothing will work after that until I pull the battery.
I've directly linked the issue with the power button. I dont know why all of a sudden the power button would have a different function. The work around I found is while the phone is locked and the screen is off I can press the green button to unlock the phone and the touch screen will then function. If I use the power button it will remain frozen. Any ideas what happened?
Hello,
I got some bad news for you, this issue is actually related to the digitizer (hardware) not software. What i would recommend is called HTC for a repair and send it in, it is covered by warranty, hopefully you have warranty.
A lot of people are having this issue, no-one yet has been able to pinpoint the cause, but here is the link a thread with similar problem:
http://forum.xda-developers.com/showthread.php?t=854165
Luckych
Thanks for the reply. I do not think I have a warranty on this phone considering I bought it privately. Ill talk to Tmo and HTC and see what I can do. Just a theory, I may be wrong. But I live in PA and its been getting below 20 here lately. I noticed today that my work around didnt work when I was outside working on my car. Then I went inside and used a blow dryer to heat up the phone and it started working again. The end button didn't function properly but I could unlock the phone with the green send button. Perhaps the cold weather is shorting out people's digitizers? I don't really know how they work so that's why i said its only a theory. I bought this phone in the spring and didnt have an issue until now when it started getting really cold.
I'm using an HD2 on T-Mobile, still running the stock Windows. (haven't gotten around to slapping android on yet)
A.) ... was at work today, took the phone out of my pocket, and I couldn't get the screen to go on. The hardware buttons on the bottom would go on, and I could feel it vibrating and booting up when I powered it on, but after hard resetting(removing the battery, I mean) the screen still wouldn't go on.
.....so I go home with it powered on still, pull it out of my pocket and BAM! the screen goes on and it looks normal... but....
1.) Now the bottom 5 hardware buttons won't go off when I lock the phone. Sometimes they're dim, sometimes they're bright as if I'm using it. sometimes they flicker on and off.
2.) the screen won't brighten beyond 20%. It adjusts 10-20% fine, but sliding it from 20%-100% does nothing.
3.)In addition, whenever I hook it up to a PC to charge/transfer files, I SOMETIMES get the "This Device would work faster in USB 2.0" message. that I never got before these issues. This is confirmed by slow transfer speeds when this happens(400-600kb/s instead of the normal 3-5mb/s). This leads me to believe it could be something internal in the phone...
Worth taking to T-Mobile? Not sure what they can do for free, I bought it used about a month ago.
I Tried a factory reset recently, didn't do anything to help these problems.
I tried running it on another battery, same issues.
Think putting android on it could help any?
XDA Devs is the best around for this type of thing, so I figure there's someone on here who could give some advice. I love the phone, but these problems are awful! Thanks so much!
try re-flashing the stock ROM first (factory reset might be not enough), then if the symptoms reappear I'd think of warranty repair
I have my lumia 800 for a week, and now its happening something strange.. When i'm in a call for some time, and i want to end it the phone doesn't let me. Its still responsive, i can go to the start screen, etc.. but the phone call remains on top with the message "ENDING". After a couple of minutes the phone freezs completely and reboot.
Someone had the same problem??
It's not happening always, but it's frustrating... I was having such a pleasant use and then this happens.. and i'm becoming a little sad and worried.
I dont's know if its a problem of hardware, it seems software because doesn't occur always.
Thoughts?
Diofil said:
I have my lumia 800 for a week, and now its happening something strange.. When i'm in a call for some time, and i want to end it the phone doesn't let me. Its still responsive, i can go to the start screen, etc.. but the phone call remains on top with the message "ENDING". After a couple of minutes the phone freezs completely and reboot.
Someone had the same problem??
It's not happening always, but it's frustrating... I was having such a pleasant use and then this happens.. and i'm becoming a little sad and worried.
I dont's know if its a problem of hardware, it seems software because doesn't occur always.
Thoughts?
Click to expand...
Click to collapse
Yes, I also had some similar kind of problems today, i could not answer the call, after they called me about 5 times i could, but then could only speak a few words before the call stopped. Also i saw the call was still running after the caller had hung up. I wanted to retart the phone, but it would not start up again, then i took it loose from the charger , and it beeped and after a while it started up again by itself.After that it worked oke again.
I think they have to look seriously at the software, there is something wrong here i believe.
I've also had this problem of calls not ending on occasion. It seems inconsistent so far though. I'd be interested to hear if this seems to be affecting everyone or if it's only a small number of handsets.
I have the same prb. The screen goes blank and cant end calls. Has to force restart
Fhame Rashid said:
I have the same prb. The screen goes blank and cant end calls. Has to force restart
Click to expand...
Click to collapse
Exact same problem here.
halfnelson117 said:
Exact same problem here.
Click to expand...
Click to collapse
For all WP7 devices the screen automatically goes blank when you are on a call and the proximity / light sensor detects your head up to the phone. However, if the screen stays off when you move your head away from the phone it means your proximity sensor (or software related to it) is faulty as it still thinks you have the phone to your head.
This happened to my HD7 after a nasty drop on a tiled floor the other day; the sensor was dislodged and permanently was set to the "on" position. I could only end a call by pulling out the battery, unless the other party hung up first. And every time my alarm went off in the morning the screen would remain dark and I would have to press the power button to get at the snooze button (this is because the sensor is telling WP7 that the phone is in a pocket or somesuch, and not to turn on the screen as the alarm could be accidently disabled or snoozed).
I fixed it by dismantling the HD7, resettling the sensors and blowing out as much dust as I could. Has been working fine since! I wouldn't recommend doing the same for your Lumia 800 though...
I dont think it is a proximity sensor issue. In doing tests, the sensor works perfectly for calls if I only have the screen off for a short period of time. If I hold the device up to my face for say 30 seconds, then the device usually freezes up and the screen goes blank, not allowing me to end a call. This makes me believe that it is a software issue that, hopefully, nokia can sort out.
Well i have been quiet on this topic as i wanted to see if the update fixed this problem BUT NO.
Today i made a call and it didnt ring but said connected i then pressed end and nothing it didnt respond infact none of the keys did anything my lumia just froze.
I couldnt even turn it off so i took the sim out and nothing still conected i just had a phone that was frozen with no way out .. so i had a usless lumia all day at work untill the battery died..I HAD NO PHONE ALL DAY !!!
I just hope it was not connected properly or my bill will be huge from t-mobile ..
This has happened a few times befor the update and always always when the signal is quite low it seems ..
But its a joke when im stuck with a usless phone all day ..
NOKIA SORT THIS OUT ITS NOT ACCEPTABLE
Hopefully this is a software issue and we haven't all received a bad batch of lumias with wonky proximity sensors.
Is there absolutely no way of reseting / rebooting the Lumia? you just have to wait for the battery to die??! That seems ludicrous!
i face the same problem many time i reset the phone by pressing power key long.
i find if i was in 3G network this problem some times happen ,so i switch off 3G and now it more than 3 days it never happen
Well to answer that question ...no its happened nine times last week, 3 of those 9 the phone is usless and you have to wait for the battery to die..maybe that's why Nokia gave us a short battery life haha, the other 6 times after about 7 min you can turn it off to reboot and the rest of the phone is responsive .. So 30% of the time when it happens U have no phone :[ even a long press of the power button does nothing
Same problem here... You can restart the phone btw: Hold power button for 10 sec, then release the power button and press it again...
This is a big problem for me, hope a fix comes in fast...
Thanks,
Samo
Im having the same issues here. Other than this its a great phone. Hopefully get it sorted soon.
same problem here, although never had to wait for battery to die.
long hold of power (10sec+) usually reboots the phone.
I keep noticing the problem when changing locations (inside/outside buildings) which is usually connected to switching to 3g - if it happens during a call I am unable to end it with screen being responsive and phone saying that it is ending call (for 30 seconds and more)
contacted Nokia regarding this problem.. they told me to reset my handset.. this is the only option they have... DUMB
same problem here... did someone find any solution?
nopes........
wheresmybeaver said:
Is there absolutely no way of reseting / rebooting the Lumia? you just have to wait for the battery to die??! That seems ludicrous!
Click to expand...
Click to collapse
You can hold the power button for 10 seconds, this will trigger a reboot.
I'm relatively often facing the same issues, worth noting is that it does seem to connect the call as I have had customers tell me they heard me grumbling before the call got disconnected (so I gotta be more careful with grumbling )
Happened to me last night, just turned the phone off (power for a few secs then slide down) and on again.
Ok, so my girlfriend dropped her phone and cracked the screen, I ordered a new LCD/Digitizer assembly and everything seemed fine. She then realized that it had a dead line while playing Draw Something. I sent back and just received a new assembly and installed it. Ever since I installed it the screen will occasionally black out and lock up. It takes forever for screen to come back up and seems very random in how long. I try powering off and on to no avail. Once it does come back I get an error log in the notification pull down saying it just rebooted form an unexpected reboot error and I have sent this notification 3 or 4 times.
Things I have tried.
Taking apart and checking all connections as well as cleaning screen on inside and out where proximity sensor goes. I am seriously at a loss, it seems to work for a while on a fresh(actual battery pull) and work fine until it just freezes no button push except power button which shuts off screen and then never comes back except for the captivate buttons on the bottom. I have searched for answers but haven't found anyhing like before.
Thoughts?
Thanks,
Kevin
I know that feel bro.
KKellett said:
Ok, so my girlfriend dropped her phone and cracked the screen, I ordered a new LCD/Digitizer assembly and everything seemed fine. She then realized that it had a dead line while playing Draw Something. I sent back and just received a new assembly and installed it. Ever since I installed it the screen will occasionally black out and lock up. It takes forever for screen to come back up and seems very random in how long. I try powering off and on to no avail. Once it does come back I get an error log in the notification pull down saying it just rebooted form an unexpected reboot error and I have sent this notification 3 or 4 times.
Things I have tried.
Taking apart and checking all connections as well as cleaning screen on inside and out where proximity sensor goes. I am seriously at a loss, it seems to work for a while on a fresh(actual battery pull) and work fine until it just freezes no button push except power button which shuts off screen and then never comes back except for the captivate buttons on the bottom. I have searched for answers but haven't found anyhing like before.
Thoughts?
Thanks,
Kevin
Click to expand...
Click to collapse
I've actually had this exact same problem with my phone. I haven't replaced the screen but ever since the update my phone will do what hers does. It will freeze after a bit of use and I cannot do anything with it but do a simpull and then it will work again for a bit. I haven't been able to fix it. I have done factory resets, had the store reflash the software and yadda yadda yadda. I'm havinh my phone replaced now but it's frustrating not being able to figure out how to fix it when I feel like it should be fixable since it literally didn't even start until minutes after I installed the update.
It sucks.