Warranty Issues: Back to stock rom but which? - Galaxy S III Q&A, Help & Troubleshooting

hi, i flashed newest cm10 nightly and want go back to my stock because of warranty issues. but there a so many stock roms and i didn't know the one i've to pick because i don't know which firmware was originally on my phone. galaxy s iii (I9300) is from germany. which one should i pick?
thanks

Was your phone network locked if so you will need to find the latest ics build for Germany and flash via Odin and uroot if you are sending back for warranty.
If your device was unlocked you can flash the latest unbranded sw.
Sent from my GT-I9300 using xda premium

thanks for your answer.
i don't think that it was network locked. can you give me a link to the correct rom?
what would happen if the phone was locked and i flash the latest unbranded sw?
thx a lot

Use CHECKFUS to download the firmware and flash via Odin .
jje

All the latest stock roms are at the beginning of this thread:
http://forum.xda-developers.com/showthread.php?t=1646610
If your phone is network locked you will need to search elsewhere for your career specific version. These are unbranded roms just ensure you change the cschool to your correct region. Apparently it does not void warranty if you sent your device back with a stock unbranded Rom but you will be doing so at you own risk. You will also need to check that your flashcounter is set to 0 (search xda for full tutorials regarding this) all of the above is what I have found but may not be the full instructions follow so therefore please do your research first. I cannot be held responsible for anything that may go wrong. I hope I have been of some help.
Sent from my GT-I9300 using xda premium

JJEgan said:
Use CHECKFUS to download the firmware and flash via Odin .
jje
Click to expand...
Click to collapse
hi,
i always get the message: invalid hidswver.
any idea?
thx
EDIT:
i now using the pro version but i don't know which version i should pick.

carrd said:
All the latest stock roms are at the beginning of this thread:
http://forum.xda-developers.com/showthread.php?t=1646610
If your phone is network locked you will need to search elsewhere for your career specific version. These are unbranded roms just ensure you change the cschool to your correct region. Apparently it does not void warranty if you sent your device back with a stock unbranded Rom but you will be doing so at you own risk. You will also need to check that your flashcounter is set to 0 (search xda for full tutorials regarding this) all of the above is what I have found but may not be the full instructions follow so therefore please do your research first. I cannot be held responsible for anything that may go wrong. I hope I have been of some help.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
thx, but i don't find a rstock rom for germany and what do you mean with cschool?

heinz gruber said:
thx, but i don't find a rstock rom for germany and what do you mean with cschool?
Click to expand...
Click to collapse
My apologies that should be ''csc''. I wrote that post from my phone and did not notice that predictive text must have changed that.
If you go to http://samsung-updates.com/device/?id=GT-I9300 and find the last DBT release (CSC for Germany) and download that.
Please bare in mind that DBT is the unbranded csc if your device was originally carrier locked you may need to flash that for example the csc for t-mobile germany is DTM.
If you hover the mouse over each csc on this page it will tell you the country and carrier

so i think i've found the basefirmware:
GT-I9300RWDDBT
but i don't find it here: http://forum.xda-developers.com/showthread.php?t=1646610

carrd said:
My apologies that should be ''csc''. I wrote that post from my phone and did not notice that predictive text must have changed that.
If you go to http://samsung-updates.com/device/?id=GT-I9300 and find the last BDT release (CSC for Germany) and download that.
Please bare in mind that BDT is the unbranded csc if your device was originally carrier locked you may need to flash that for example the csc for t-mobile germany is DTM.
If you hover the mouse over each csc on this page it will tell you the country and carrier
Click to expand...
Click to collapse
thx. but when i serach the site i don't find any entrys with BDT oder CSC.

heinz gruber said:
thx. but when i serach the site i don't find any entrys with BDT oder CSC.
Click to expand...
Click to collapse
GT-I9300 DBT I9300XXBLH3 Android 4.0.4 24.08.2012 21.08.2012 928452
Sorry typo should be DBT as listed above (these details are from the link I sent you
---------- Post added at 12:38 PM ---------- Previous post was at 12:33 PM ----------
heinz gruber said:
so i think i've found the basefirmware:
GT-I9300RWDDBT
but i don't find it here: http://forum.xda-developers.com/showthread.php?t=1646610
Click to expand...
Click to collapse
Thats not the full list. Just some of the latest

carrd said:
GT-I9300 DBT I9300XXBLH3 Android 4.0.4 24.08.2012 21.08.2012 928452
Sorry typo should be DBT as listed above (these details are from the link I sent you
---------- Post added at 12:38 PM ---------- Previous post was at 12:33 PM ----------
Thats not the full list. Just some of the latest
Click to expand...
Click to collapse
ok, do you know whre i find the complete list?
and when i search for DBT i only find kernel.zip and modem.zip. maybe i'm blind?

sammobile.com... You need to be registered on their site then use the search function. Enter "I9300" and you should get a list of all the firmware versions...

now i've a serious problem:
i flashed I9300XXDLIH I9300DBTDLI2 an odin said all is correct. now i stuck at the samsung logo in the boot process. someone an idea?

^^no one an idea? what should i do? because flashing with the toolkit only works when booted in android. or not?

Flash CF root boot to recovery .
Mounts and storage format sd card data cache system .
Boot to download mode flash rom via Odin factory reset .
jje

JJEgan said:
Flash CF root boot to recovery .
Mounts and storage format sd card data cache system .
Boot to download mode flash rom via Odin factory reset .
jje
Click to expand...
Click to collapse
please can you explain how to flash CF and where can i get it? i've only worked with the toolkit so far.
thanks a lot

http://forum.xda-developers.com/showthread.php?t=1695238
jje

Related

Fw 2.3.4 XWKI4 COA

Hello guys, and sorry if my English is not good.
Because I do not have 10 posts, so I post it here:
I have a request, Asthe looking and seeing on this link: http://forum.xda-developers.com/showthread.php?t=1075278 there is what I try.
I'm looking for fw 2.3.4 XWKI4 COA (Romania) and the kernel-2.6.35.7-I9100XWKI4 CSL75468 DELL143 root @ # 2, and I would need in case you ever need the warranty ...
Can you help me find them?
Thanks in advance
Stefano
stevtec86 said:
Hello guys, and sorry if my English is not good.
Because I do not have 10 posts, so I post it here:
I have a request, Asthe looking and seeing on this link: http://forum.xda-developers.com/showthread.php?t=1075278 there is what I try.
I'm looking for fw 2.3.4 XWKI4 COA (Romania) and the kernel-2.6.35.7-I9100XWKI4 CSL75468 DELL143 root @ # 2, and I would need in case you ever need the warranty ...
Can you help me find them?
Thanks in advance
Stefano
Click to expand...
Click to collapse
You can either get them from samfirmware.com, or look up checkfus.
As for that thread you linked above, a lot of file hosting sites were shut down that many devs on this site use. So you'll have to be patient for them to find new hosting sites.
ctomgee said:
You can either get them from samfirmware.com, or look up checkfus.
As for that thread you linked above, a lot of file hosting sites were shut down that many devs on this site use. So you'll have to be patient for them to find new hosting sites.
Click to expand...
Click to collapse
Thank you!
But for warranty service, I'm forced to install the 2.3.4 fw XWKI4 COA or can I put another, more and 2.3.4?
PS on samfirmaware, there's only Fw 2.3.4 XWKi4 Romania only Vodafone Brand!!!!
My it's no Brand
Man here is officials rom:http://devsrom4android.blogspot.com/
Sorry, but where do I go to download the rom that interests me?
I went here, sectoin galaxy s2 i found my rom, but I can not download it ... how do I?
this is my rom?
Romania (Cosmote) COA - I9100XWKI4 / I9100OXFKE1 (Android 2.3.4 Gingerbread) what's COSMOTE?
Here is link:http://www.hotfile.com/dl/142452688/aa272f0/I9100BVKL1_I9100OROKL1_ORO.zip.html
stevtec86 said:
Sorry, but where do I go to download the rom that interests me?
I went here, sectoin galaxy s2 i found my rom, but I can not download it ... how do I?
this is my rom?
Romania (Cosmote) COA - I9100XWKI4 / I9100OXFKE1 (Android 2.3.4 Gingerbread) what's COSMOTE?
Click to expand...
Click to collapse
Again, since the hosting sites many people used to host files are shut down, a LOT of links don't work.
It sounds like you are looking for a carrier branded firmware, but you didn't mention who your carrier is. As far as I know, Cosmote is a major carrier in Romania.
If you are looking for an UNbranded firmware, you may have more luck. Those are more common, and more likely to be hosted on a site that hasn't been shut down yet.
---------- Post added at 10:18 AM ---------- Previous post was at 10:17 AM ----------
umarian said:
Here is link:http://www.hotfile.com/dl/142452688/aa272f0/I9100BVKL1_I9100OROKL1_ORO.zip.html
Click to expand...
Click to collapse
That is a link to KL1. OP was asking for KI4...
my rom in not thet....but this Romania (Cosmote) COA - I9100XWKI4 / I9100OXFKE1 (Android 2.3.4 Gingerbread)
stevtec86 said:
my rom in not thet....but this Romania (Cosmote) COA - I9100XWKI4 / I9100OXFKE1 (Android 2.3.4 Gingerbread)
Click to expand...
Click to collapse
Did you try checkfus???
Cosmote is then as TIM or Vodafone in Italy?
But mine is no brand
my info fw are ( *#1234#)
product code==> GT-I9100RWACOA
pda==>I9100XWKI4
phone==>I9100XXKI1
CSC==>I9100XFKE1
Build info: wed sept. 14 20:34:11 KST 2011
stevtec86 said:
Cosmote is then as TIM or Vodafone in Italy?
But mine is no brand
Click to expand...
Click to collapse
So you're saying your phone is unbranded then, right? Then why were you asking for a Cosmote branded version above?
Anyways, if you're looking for an UNbranded XWKI4, then try this link, it looks like it may still be working.
Found easily by Google.
stevtec86 said:
Cosmote is then as TIM or Vodafone in Italy?
But mine is no brand
my info fw are ( *#1234#)
product code==> GT-I9100RWACOA
pda==>I9100XWKI4
phone==>I9100XXKI1
CSC==>I9100XFKE1
Build info: wed sept. 14 20:34:11 KST 2011
Click to expand...
Click to collapse
this is my version rom
But if my rom in brand Cosmote, why telephone on start i see only write Galaxy s2 an after i see write samsung and not the brand Cosmote?
stevtec86 said:
this is my version rom
But if my rom in brand Cosmote, why telephone on start i see only write Galaxy s2 an after i see write samsung and not the brand Cosmote?
Click to expand...
Click to collapse
You don't seem to be getting it.
Does your phone say Cosmote anywhere on it?
Everything you are saying points to that your phone IS NOT COSMOTE BRANDED. Why are you asking for a Cosmote branded ROM?
ctomgee said:
You don't seem to be getting it.
Does your phone say Cosmote anywhere on it?
Everything you are saying points to that your phone IS NOT COSMOTE BRANDED. Why are you asking for a Cosmote branded ROM?
Click to expand...
Click to collapse
my phone does not seem to have no icons or other brand of Cosmote, but if I type * # 1234 # csc file I9100XFKE1 me and tells me the same info checkfus
I do one more question: I have a European guarantee, and I have to bring your phone for repair under warranty, to be able to get service, I have fw perforza starting at the time of purchase or I can leave the same version, however, the xwki4 Nobrand ?
stevtec86 said:
my phone does not seem to have no icons or other brand of Cosmote, but if I type * # 1234 # csc file I9100XFKE1 me and tells me the same info checkfus
Click to expand...
Click to collapse
CSC is country specific settings. You can flash that separately after you flash the whole firmware I linked above. (which is PDA: XWKI4, and PHONE: XXKI1, but CSC: ENKI1)
But you may not have to flash the CSC.
Intratech had a whole list of the CSC files in his official firmware thread, but like I said before, with multiupload being shut down, you're going to have a hard time finding files that are still hosted somewhere.
---------- Post added at 11:16 AM ---------- Previous post was at 11:14 AM ----------
stevtec86 said:
I do one more question: I have a European guarantee, and I have the portaree terlefono serviced under warranty in order to get service, I have fw perforza starting at the time of purchase or I can leave the same version, however, the xwki4 Nobrand ?
Click to expand...
Click to collapse
I can't answer this; I don't know. Did you flash any non-stock kernels? If you did, then your binary counter increased. You may have to use a USB jig to put the counter back to zero. (please google this if you don't know - there have been hundreds of threads on it)
If the binary counter is 1 or more, they will probably refuse warranty coverage, and will probably then charge you for any service.
ctomgee said:
CSC is country specific settings. You can flash that separately after you flash the whole firmware I linked above. (which is PDA: XWKI4, and PHONE: XXKI1, but CSC: ENKI1)
But you may not have to flash the CSC.
Intratech had a whole list of the CSC files in his official firmware thread, but like I said before, with multiupload being shut down, you're going to have a hard time finding files that are still hosted somewhere.
---------- Post added at 11:16 AM ---------- Previous post was at 11:14 AM ----------
I can't answer this; I don't know. Did you flash any non-stock kernels? If you did, then your binary counter increased. You may have to use a USB jig to put the counter back to zero. (please google this if you don't know - there have been hundreds of threads on it)
If the binary counter is 1 or more, they will probably refuse warranty coverage, and will probably then charge you for any service.
Click to expand...
Click to collapse
so if I put the same fw but with different csc, warranty europe I jump? right?
I mount stock kernels
stevtec86 said:
so if I put the same fw but with different csc, warranty europe I jump? right?
I mount stock kernels
Click to expand...
Click to collapse
Sorry, I don't understand the first sentence. What does "warranty europe I jump" mean??
ctomgee said:
Sorry, I don't understand the first sentence. What does "warranty europe I jump" mean??
Click to expand...
Click to collapse
I meant that if I have the stock kernel and fe XWKI4 Nobrand however, so in theory no one that when I mount, europe the guarantee is no longer valid?
PS: if my phone or brand Cosmote, Cosmote logo should appear on startup?
stevtec86 said:
I meant that if I have the stock kernel and fe XWKI4 Nobrand however, so in theory no one that when I mount, europe the guarantee is no longer valid?
Click to expand...
Click to collapse
This is still pretty hard for me to understand, I'm sorry.
But really, there are no guarantees either way, once you've flashed anything to your phone. The only way to absolutely guarantee warranty service is to not flash anything to your phone, and keep it away from water.
The best you can do if you've flashed anything to your phone, is to flash back to a stock firmware, reset the counter, and hope for the best.
stevtec86 said:
PS: if my phone or brand Cosmote, Cosmote logo should appear on startup?
Click to expand...
Click to collapse
I believe so, yes, or it will have the Cosmote logo affixed somewhere on the phone. But I don't know for sure, because I'm not in Europe, let alone Romania.

Software upgrade through ODIN guide required

Hi guys,
Need your help.
I have an SGS2 in pakistan. Phone came from UK from orange and was unlocked here. When i try to update through kies, it freezes at "downloading upgrade components" and stays there. Waited for 2 hours without any change so decided to update through odin. My questions:
My phone detail is:
PDA-KH2/Phone-KH1/CSC:KH2(ORA)
I have downloaded the updated software KJ4(ORA) for orange from sammobile website. My questions:
1. Will be there any issue due to my location and network which is not now orange?
2. Which ODIN i should use, there is one with version 1.85 on XDA and one at sammobile with version 1.83 on sammobile?
3. Guide at sammobile for flashing says to check re partition whereas on XDA it is told not to check re partition.Who to follow.
Looking forward to your guide.
Without going into detail if your fone is a i9100P which is NFC you can flash any of the i9100 firmware but not for the M or G models ok.
You can look for a firmware for your said location and flash using 1.83 or 1.85 odin. Also you have things like modem and apn settings but others you be ok..
sdogar said:
Hi guys,
Need your help.
I have an SGS2 in pakistan. Phone came from UK from orange and was unlocked here. When i try to update through kies, it freezes at "downloading upgrade components" and stays there. Waited for 2 hours without any change so decided to update through odin. My questions:
My phone detail is:
PDA-KH2/Phone-KH1/CSC:KH2(ORA)
I have downloaded the updated software KJ4(ORA) for orange from sammobile website. My questions:
1. Will be there any issue due to my location and network which is not now orange?
Not if its unlocked and you use CSC for the location.
2. Which ODIN i should use, there is one with version 1.85 on XDA and one at sammobile with version 1.83 on sammobile?
Any
3. Guide at sammobile for flashing says to check re partition whereas on XDA it is told not to check re partition.Who to follow.
Your choice but i would not download firmware from one site and ask another site for instructions .Sammobile have a forum .
But neither would i check repartition or use PIT as thats an easy route to a brick .
jje
Click to expand...
Click to collapse
Nyssa1104 said:
Without going into detail if your fone is a i9100P which is NFC you can flash any of the i9100 firmware but not for the M or G models ok.
You can look for a firmware for your said location and flash using 1.83 or 1.85 odin. Also you have things like modem and apn settings but others you be ok..
Click to expand...
Click to collapse
How to check if it is M 0r G ???
Sticker under the battery, or the box/documentation that came with the phone.
sdogar said:
How to check if it is M 0r G ???
Click to expand...
Click to collapse
JJEgan said:
sdogar said:
Hi guys,
Need your help.
I have an SGS2 in pakistan. Phone came from UK from orange and was unlocked here. When i try to update through kies, it freezes at "downloading upgrade components" and stays there. Waited for 2 hours without any change so decided to update through odin. My questions:
My phone detail is:
PDA-KH2/Phone-KH1/CSC:KH2(ORA)
I have downloaded the updated software KJ4(ORA) for orange from sammobile website. My questions:
1. Will be there any issue due to my location and network which is not now orange?
Not if its unlocked and you use CSC for the location.
2. Which ODIN i should use, there is one with version 1.85 on XDA and one at sammobile with version 1.83 on sammobile?
Any
3. Guide at sammobile for flashing says to check re partition whereas on XDA it is told not to check re partition.Who to follow.
Your choice but i would not download firmware from one site and ask another site for instructions .Sammobile have a forum .
But neither would i check repartition or use PIT as thats an easy route to a brick .
jje
Click to expand...
Click to collapse
Not if its unlocked and you use CSC for the location.
How to check if i use CSC for the location ?
Click to expand...
Click to collapse
sdogar said:
JJEgan said:
Not if its unlocked and you use CSC for the location.
How to check if i use CSC for the location ?
Click to expand...
Click to collapse
SEARCH and read .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the answers. Will i lose my installed applications when i upgrade and is hard reset to be done or not ?

Galaxy S3 Israeli carrier firmware update

Hello,
I have a galaxy s3 I9300 (international) running on:
AP: I9300JKALE2
CP: I9300JKLE8
CSC: I9300OJKALE6
I've rooted using CF-Root 6.4; I'd like to know how to update my firmware manually, because the Israeli carrier is really bad at releasing updates. Which version should I get? I looked over the list of firmwares but I couldn't find one for Israel.
Would I need to enter any values and settings manually once I update?
Will the new firmware override the rooting?
Basically, what version to download and what is the right way to get it on a rooted phone.
Many thanks in advance
furou said:
Hello,
I have a galaxy s3 I9300 (international) running on:
AP: I9300JKALE2
CP: I9300JKLE8
CSC: I9300OJKALE6
I've rooted using CF-Root 6.4; I'd like to know how to update my firmware manually, because the Israeli carrier is really bad at releasing updates. Which version should I get? I looked over the list of firmwares but I couldn't find one for Israel.
Would I need to enter any values and settings manually once I update?
Will the new firmware override the rooting?
Basically, what version to download and what is the right way to get it on a rooted phone.
Many thanks in advance
Click to expand...
Click to collapse
Cut and Paste
Via the two stock rom, threads or via Sammobile or via Checkfus may find your areas firmware .
Root via Chainfires CF root thread .
End ..
Is their not an Israeli threa d ???
jje
Will the new firmware override the rooting?
Click to expand...
Click to collapse
Yes. All stock firmwares do.
Would I need to enter any values and settings manually once I update?
Click to expand...
Click to collapse
Usually not if you upgrade without Wipe.
You may have to enter APN settings manually on Wipe if they cannot be loaded from the SIM-card
Which version should I get?
Click to expand...
Click to collapse
Any one you like, firmwares are interchangeable.
Basically, what version to download and what is the right way to get it on a rooted phone.
Click to expand...
Click to collapse
Flash with Odin, then re-root the phone with CF-Root.
JJEgan said:
Cut and Paste
Via the two stock rom, threads or via Sammobile or via Checkfus may find your areas firmware .
Root via Chainfires CF root thread .
End ..
Is their not an Israeli threa d ???
jje
Click to expand...
Click to collapse
The problem was that there is no official update for the Israeli orange-partner rom. So checking via sammobile and checkfus didn't give any results because I believe an update especially for Israel doesn't exist yet. I meant in OP which firmware would be closest and safest to flash, considering what I have now. I apologize for not being clearer.
d4fseeker said:
Usually not if you upgrade without Wipe.
You may have to enter APN settings manually on Wipe if they cannot be loaded from the SIM-card
Any one you like, firmwares are interchangeable.
Flash with Odin, then re-root the phone with CF-Root.
Click to expand...
Click to collapse
Thanks dude
You can flash the latest firmwares found in sammobile, you don't have to use firmwares made for palestine..
They all work.
Skander1998 said:
You can flash the latest firmwares found in sammobile, you don't have to use firmwares made for palestine..
They all work.
Click to expand...
Click to collapse
He's looking for an Israeli ROM not a thinly veiled political statement.
Roadrunner100 said:
He's looking for an Israeli ROM not a thinly veiled political statement.
Click to expand...
Click to collapse
Can you keep your political stupidness away? Palestine / Israel / Car / Cat no body cares, i can call it what i want.. the OP doesn't even mind it.. so please mind your own business.
Skander1998 said:
Can you keep your political stupidness away? Palestine / Israel / Car / Cat no body cares, i can call it what i want.. the OP doesn't even mind it.. so please mind your own business.
Click to expand...
Click to collapse
That makes no sense at all. How can you call a car a cat? Two different things . Anyways have some respect to other members on a public forum, no one needs your political crap about Palestine/Israel its against the rules. I can call Jordan, Palestine as well but I won't. Trust me don't get into politics here, its a modding forum for Christ sakes.

why change the stock firmware?

Ok for the procedure there is no problem, I have already informed.
But I would ask why one should change the firmware (in my case from I9300XXALF6 ita to I9300XXBLG8 uk)?
I don't care if the language of the cell is eng or ita, but if i have the uk stock i will get the official update quick then the ita stock?
And for automatic updates with the uk stock they came alone or i have to download and install the new uk stock?
Sorry for the noob questions but I do not know where to ask
no one can help me?
I Couldn't understand your question properly but I'll try to help.
Having a UK ROM would make you get all the OTA update's quicker (as of now).
In OTA's you only need to download a small bit of the ROM and you don't have to do anything. the phone will do everything on it's own.
But you have to download the UK official ROM from sammobile.com.
Hope that helps.
ty for the answer so the version is the same (uk stock and ita stock) but i get the update quickly right?
maybe the uk modem driver is better then the ita?
ScorpionRa said:
ty for the answer so the version is the same (uk stock and ita stock) but i get the update quickly right?
maybe the uk modem driver is better then the ita?
Click to expand...
Click to collapse
They are same but if you use a UK baseband/modem there is no guarantee that everything SHOULD work.
One thing is, it'll surely not brick your phone.
Try it, but it's not recommended.
so if there are problems i can go back with the stock ita doing the same i have do for the uk stock but this time with the ita stock?
ScorpionRa said:
no one can help me?
Click to expand...
Click to collapse
Bumping posts in a very short time space is against the rules ..
No you don't get an update quicker you might but UK has never been first for all firmware .
Firmware is changed for a number of reasons by users .
One they want the latest good or bad must have new .
Two the firmware may have some improvements .
Modem has nothing to do with the Sim card .
Modems may work well for some networks not for others .
Updates come OTA or via KIES
If you change your firmware thats the firmware update ..
If your phone works well do not change the firmware .
jje
JJEgan said:
Modem has nothing to do with the Sim card .
Modems may work well for some networks not for others .
Click to expand...
Click to collapse
I doubt your 1st sentence because with my old galaxy 5 it was effecting somehow (not for me, but others) and ya your 2nd sentence is correct..
But wait!! aren't the two kinda related??
ty and sorry for the short time bump
Hey .I want to change the region code but I only have the phe , and I want to change to DBT
How can i do that.
Thanks
Sent from my GT-I9300 using xda app-developers app
dicho said:
Hey .I want to change the region code but I only have the phe , and I want to change to DBT
How can i do that.
Thanks
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
SEARCH
location
http://forum.xda-developers.com/showthread.php?t=1671969
jje
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
123shree said:
I doubt your 1st sentence because with my old galaxy 5 it was effecting somehow (not for me, but others) and ya your 2nd sentence is correct..
But wait!! aren't the two kinda related??
Click to expand...
Click to collapse
Yes they are related and my first statement is true modem cannot break a sim card or make a sim card not work . Wrong modem can mean no connection despite the sim card being 100% .
jje
JJEgan said:
SEARCH
location
http://forum.xda-developers.com/showthread.php?t=1671969
jje
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
I think I don't explain well, I want to change the code to dbt insted phe to update via ota.
I already upgrade to the I9300XXBLG8 with odin
Click to expand...
Click to collapse
dicho said:
JJEgan said:
SEARCH
location
http://forum.xda-developers.com/showthread.php?t=1671969
jje
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
I think I don't explain well, I want to change the code to dbt insted phe to update via ota.
I already upgrade to the I9300XXBLG8 with odin
Click to expand...
Click to collapse
CSC how to change in the link given ..
OTA not a clue what is it .
jje
Click to expand...
Click to collapse
i wanna change the region code when you tipe *#272*imei#
and it only apear phe
sorry for my english

Rooted SG3 no updates available?

Hi
I have an SG3 unlocked and I rooted it. Baseband I9300XXLF5, Build IMM76D.I9300XXALF6
I haven't received any update and from Kies it show no firmware update availabel. Is it because I have a rooted device?
I checked in SamMobile but I don't understand which firmare or how I should download.
Alex
You can search firmwares by country/region.
Sent from my GT-I9300 using xda app-developers app
I am also a bit confused with the number of firmware out there and wondering which is the latest. The only thing I know is the leaked JB firmware XXDLH4 > XXDLH6 and now the XXDLH7. Its easy to see which is newer but on the original firmware, so many different code and its just confusing
- Charles
---------- Post added at 10:33 PM ---------- Previous post was at 10:29 PM ----------
Regarding firmware based on region, I am from Blackberry. Its often ok or should I say OK to download firmware from other service provider as long the phone is the same model. Sometimes, your region or provider may not update their firmware so installing other provider's / region's firmware will actually be better. Some regions just seems to update their firmware much faster than others and providing improvements and fixes faster than others.
- Charles
SandroV1972 said:
Hi
I have an SG3 unlocked and I rooted it. Baseband I9300XXLF5, Build IMM76D.I9300XXALF6
I haven't received any update and from Kies it show no firmware update availabel. Is it because I have a rooted device?
I checked in SamMobile but I don't understand which firmare or how I should download.
Alex
Click to expand...
Click to collapse
Depends on where you live, most updates get to the UK first (even leaks).
Where do you live?
Skander1998 said:
Depends on where you live, most updates get to the UK first (even leaks).
Where do you live?
Click to expand...
Click to collapse
Italy so you say my formware is the latest available in Italy?
Download and flash a firmware with the CSC "BTU" it is for Britain and unbranded and gets updates first.
Sent from my GT-I9300 using xda premium
nodstuff said:
Download and flash a firmware with the CSC "BTU" it is for Britain and unbranded and gets updates first.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Flash via Odin?
Yep...
ultramag69 said:
Yep...
Click to expand...
Click to collapse
Odin Flash FAILS with ITV file (lates Italian firmware). I use md5 file on CSC via Odin.
I will try using the Britain file.
Now that I am rooted of I need to update when JB comes out do I need to unroot?
The unroot process I've seen on YouTube imply a total wipe of the phone. A real hassle.
Any alternative?
Firmware is PDA not CSC.
Dev section Chainfires CF Root no wipe.
jje
Sent from my GT-I9300 using xda premium

Categories

Resources