Hi All,
Noob here with what I think is a soft brick issue.
Under the battery it says Model: GT-i9100, SSN: i9100GSMH
Originally Gingerbread, then I upgraded to 4.03 via official Kies firmware release.
Couple of days ago tried to upgrade to 4.04 using ODIN and got a fail at factoryfs.img. probably used the wrong firmware.
Could still get into download mode at that stage, but can't anymore. I tried to install a couple of different firmware versions of 4.04. I can still get 'added' when I connect to ODIN though.
Can somebody please help me to upgrade to either 4.04 or Jellybean? I'm willing to go fully custom, just don't know how to do it....Can I do it with ODIN? Do i need a new kernel or pit or something?
Thanks heaps, really appreciate any help.
Cheers,
Jackson
Given you can't get into download mode (and I presume the phone won't boot & you can't get into recovery either ?) it's either a JTAG or service centre job.
MistahBungle said:
Given you can't get into download mode (and I presume the phone won't boot & you can't get into recovery either ?) it's either a JTAG or service centre job.
Click to expand...
Click to collapse
Hi Mistah Bungle, thanks for your reply.
So is that even though the phone shows up as added in ODIN?
J
If the phone shows 'added' in Odin (yet the phone show no signs of life whatsoever; you still haven't clarified this btw), then you might as well try flashing a stock rom & see what happens. I mean, the phone's borked. It probably won't work, but it's not like you'll bork it worse if you do try another flash.
Forget about upgrading to 4.0.4 for now. Just download a stock firmware for you phone no matter Gingerbread or ICS. Search this forum, you'll find many links. Connect your phone to Odin and try flashing the downloaded stock firmware. Once you get it up and running, you can try upgrading it.
In this situation, it wouldn't be wise to go for a custom firmware. Your best chance of bringing your phone back to life lies in successfully flashing a stock firmware.
No problem if the screen isn't showing anything. I remember Vibrant behaving like this. Just flash the firmware once Odin detects your phone. If the flashing fails, disconnect, take out the battery and start over.
Good Luck!
Hi Guys, thanks for the updates. I'll try to suss out what the correct stock option is and try my luck. and yeah, for clarification purposes - the phone doesn't respond to anything bar an Odin connection as far as I can see. Cheers again )
Related
Ok, here's the deal:
Rooted the device, everything was a-ok.
Installed Clockwork, everything still a-ok.
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Ever since, it won't go past the screen you get at the beginning (w/ the yellow sign indicating an unsecured rom). It just stays there forever.
What I have to work with:
- Clockwork Recovery is available.
- The device is recognized by Odin when in download mode.
- The device is not recognized by the computer/Kies.
What I've tried:
- Followed the instruction for boot loop w/ both stock rom and Villain (no dice).
I'm sorta freaking out now. I have yet to see anyone having the same problem online and I really hope it's not bricked - a 600$ paperweight...
Is there something else I can try? Is it possible to flash stock PIT/Bootloader/PDA/everything else? If it is, would it fix the problem?
Please just point me in the right direction.
Thank You,
Edit: In recovery mode, the following error appears:
- Can't access to "/system/csc/VMC/system/"
Edit: In download mode, the current binary is set to "Samsung Official". Therefore I think this isn't the problem.
Edit: OMG OMG holy crap. Problem has been solved. Got a friend who had the same phone from the same provider to tell me what the firmware for the phone was. Downloaded it. Installed it w/ Odin. I almost turned religious when it booted a bit slower than what I remembered. It works well enough now, although I will probably go exchange it for a new one ASAP, before my warranty expires.
If anyone has similar problems. Don't panic and re-install stock firmware.
Cheers Folks!
Rovah said:
Ok, here's the deal:
Rooted the device, everything was a-ok.
Installed Clockwork, everything still a-ok.
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Ever since, it won't go past the screen you get at the beginning (w/ the yellow sign indicating an unsecured rom). It just stays there forever.
What I have to work with:
- Clockwork Recovery is available.
- The device is recognized by Odin when in download mode.
- The device is not recognized by the computer/Kies.
What I've tried:
- Followed the instruction for boot loop w/ both stock rom and Villain (no dice).
I'm sorta freaking out now. I have yet to see anyone having the same problem online and I really hope it's not bricked - a 600$ paperweight...
Is there something else I can try? Is it possible to flash stock PIT/Bootloader/PDA/everything else? If it is, would it fix the problem?
Please just point me in the right direction.
Thank You,
Edit: In recovery mode, the following error appears:
- Can't access to "/system/csc/VMC/system/"
Edit: In download mode, the current binary is set to "Samsung Official". Therefore I think this isn't the problem.
Edit: OMG OMG holy crap. Problem has been solved. Got a friend who had the same phone from the same provider to tell me what the firmware for the phone was. Downloaded it. Installed it w/ Odin. I almost turned religious when it booted a bit slower than what I remembered. It works well enough now, although I will probably go exchange it for a new one ASAP, before my warranty expires.
If anyone has similar problems. Don't panic and re-install stock firmware.
Cheers Folks!
Click to expand...
Click to collapse
Same problem. anyone?
Vincho said:
Same problem. anyone?
Click to expand...
Click to collapse
Did you read the answer ???
jje
Look online (samfirmware), ask friends or on forums for anyone who has the SGS2 w/ the same carrier in the same country and try to find the firmware version (I9100***** - the stars are letter codes). Then just download that firmware and use Odin to install it.
If you can't find it,you presumably could just flash any stock firmware and it might work (or it might make things worse, try at your own risk)
Rovah said:
Tried using mod manager to install Cyanogen nightly 9, phone rebooted and the progress bar for the mod install wouldn't move. I waited for a while and eventually manually turned the device off as it wasn't making any progress.
Click to expand...
Click to collapse
The progress bar not moving is a known issue with the CM7 Recovery. All you need to do is wait for it to say that it's finished. There is nothing wrong with your phone and no need to return it. You just cancelled the CM7 install part way through which meant not all required files were installed on the phone, causing it to not boot.
As for it taking longer to boot into android after the odin reflash. That's because it has to build up it's dalvik-cache again. This is completely normal any time you install a new rom. It only happens on first boot of a rom.
So again, no need to return your device and feel free to try CM7 again. Just remember to let it finish even if the progress bar isn't moving.
Ahh. Ok that makes sense. This ought to teach me to read before screwing around w/ my phone.
I wanted to exchange it because I wasnt sure i'd still be able to install official Samsung firmware updates through Kies.
Suppose an official 2.3.4 firmware comes out, would i be able to install it through Kies?
Sent from my GT-I9100 using XDA App
Rovah said:
Ahh. Ok that makes sense. This ought to teach me to read before screwing around w/ my phone.
I wanted to exchange it because I wasnt sure i'd still be able to install official Samsung firmware updates through Kies.
Suppose an official 2.3.4 firmware comes out, would i be able to install it through Kies?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes, as long as the firmware you're flashing is the same as the stock version that came on the phone. And even if not, you'll get the kies updates for whatever region firmware you did flash onto the phone.
I see. Thanks a lot!
Is there any danger to flashing firmware from a different region than the one youre from?
Sent from my GT-I9100 using XDA App
guys having a nightmare now,
got my usb jig yesterday to get into download mode(home button does not work and is getting rma)
went to intratech page downloading uk orange firmware plus kernal (dont know how i flash the kernel???)
got hold of a pc with odin flashed it sucessfully still stuck in bootloop!!!!
anyone help
sutty86 said:
guys having a nightmare now,
got my usb jig yesterday to get into download mode(home button does not work and is getting rma)
went to intratech page downloading uk orange firmware plus kernal (dont know how i flash the kernel???)
got hold of a pc with odin flashed it sucessfully still stuck in bootloop!!!!
anyone help
Click to expand...
Click to collapse
have you gone to recovery and wiped data?
or find a firmware which wipes the data off the phone, i think the KL1 firmware does this.
buddy i cant get into clock work or any other sort of recovery as my home button does not work
can you link me to the correct firmware
would be appreciated xmas good will
you can find the original kernels and firmwares here: http://forum.xda-developers.com/showthread.php?t=1075278
search and subscriptions are a handy thing to have. Merry x-mas, hope you get to unbrick your phone!
cheers guy ive been to that site you have linked but still no avail when flashing the stock orange uk ones for my phone will take your advice nex and look for a kl1 to wipe the date
it really doesnt matter which one you flash, just flash the one which wipes your device completely and then flash back to the firmware of your manufacturer.
do you know any of the top of your head which flash them phone whole???
Please read the whole guide that is in the link and then use one of the firmwares that include "This firmware will wipe your device!" warning... for example DXKG3.
heres the firmware and files im using
if you're from UK use this KI3 Wipe firmware http://www.multiupload.com/NJV6PR87Y3
it should do a wipe therefore making you're phone bootable. go back into download mode and install speedmod kernel, which would also root your phone automatically. http://forum.xda-developers.com/showthread.php?t=1182498 ( flash speedmod-kernel-s2-k2-18-Odin.tar in odin).
use something like ROM manager to get into recovery mode and install VillanROM http://www.villainrom.co.uk/SGS2/VR3.0beta.php and a kernel of your choice and away you go
ANSWERED - Firmware Install - factory reset in recovery
I made a mess of a rom install rushing through rom Manager and now my phone can't get past the Samsung screen when booting, and I can't find out the version of my kernel to install the correct one without getting my phone on. I can get the phone into download mode and I have tried a number of different kernels but have had no luck. It's a UK phone so I know it's a XW or XX to start, I was wondering is their a kernel that works on any SGS2.
I have been having trouble with getting windows to recognize the phone and have found a number of fixes on this site which have worked and not worked (atm not connecting)
it's a sgs2 GT-i9100
Any advice greatly appreciated
Did you make a Nandroid backup? If so boot into recovery (vol up, power, home buttons) and restore the backup.
Can you get into recovery mode. Vol up plus home plus power. Then do a factory reset. this should get past the Samsung boot screen. Then flash another rom.
Sent from my ThinkPad Tablet using XDA App
Thanks for getting back, no unfortunately not, couldn't see recovery mode since the original failed rom install. That combination gets me to download mode now.
So as far as I can tell I need to get a firmware working properly or do a reset but I don't know which is the right firmware to use
Main thing is you can get to download mode. If you can do that, you can fix your phone 95% of the time.
You can find carrier/country specific firmware here or country-only/non-specific firmware here
owen5y said:
Thanks for getting back, no unfortunately not, couldn't see recovery mode since the original failed rom install. That combination gets me to download mode now.
So as far as I can tell I need to get a firmware working properly or do a reset but I don't know which is the right firmware to use
Click to expand...
Click to collapse
Just flash any CF-root kernel and then you have recovery back. Start flashing from there on.
Lennyz1988 said:
Just flash any CF-root kernel and then you have recovery back. Start flashing from there on.
Click to expand...
Click to collapse
I have tried a number of CF-root kernels and no joy. I tried a few more kernels this morning before work, including cf-root and siyahv2.6.4 and had no luck.
MistahBungle said:
Main thing is you can get to download mode. If you can do that, you can fix your phone 95% of the time.
You can find carrier/country specific firmware here or country-only/non-specific firmware here
Click to expand...
Click to collapse
I actually flashed some of those kernels XWKE1 for example and a few others with no joy.
The problem started when I tried to update the Galent Miui ICS which I see you are running. I (stupidly) didn't read through the statement as I had my NYE hungover and just put the update on my sd and used recovery to update which froze the phone at the boot screen. (I didn't do re-flash and I didn't wipe the data and everything else.) I know it sometimes takes time to boot but I had left it for a half hour to see if it would and no joy. I was no longer able to get to recovery mode so I tried a half dozen kernels with the same problems before putting up a post. I'm not sure would people find it inappropriate to talk about an this problem here, I thought as it's a kernel problem now it would be a better place to find the solution although my own lazy Miui install was the cause.
Flashing just the kernels obviously didn't fix the problem. Have you flashed any of the entire stock firmwares ? Choose the most recent firmware for your carrier/country from the first link I gave you (if there's more than two listed).
owen5y said:
I actually flashed some of those kernels XWKE1 for and a few others with no joy.
The problem started when I tried to update the Galent Miui ICS which I see you are running. I (studidly) didn't read through the statement as I was hungover and just pu the update on my sd and used recovery to update which froze the phone at the boot screen. I know it sometimes takes time to boot but I had left it for a half hour to see if it would and no joy. I was no longer able to get to recovery so I tried a half dozen kernels with the same problems before putting up a post.
Click to expand...
Click to collapse
MistahBungle said:
Flashing just the kernels obviously didn't fix the problem. Have you flashed any of the entire stock firmwares ? Choose the most recent firmware for your carrier/country from the first link I gave you (if there's more than two listed).
Click to expand...
Click to collapse
Yes I will try that. At work currently and so can't play with the phone. I will post the result this evening.
Thanks
NP. Let us know how you get on.
MistahBungle said:
NP. Let us know how you get on.
Click to expand...
Click to collapse
All good, I installed the firmware and was able to get into recovery mode from there. Did a factory reset because I was stuck in a boot loop. Going to give it a go again to upgrade to the new ics build. Any advice on the best process of getting there?
I installed the following firmware prior to the reset
UK
XWKE1:http://www.multiupload.com/15RY5CHHW9
Firmware info: PDA: XWKE1 Phone: NEKD5 CSC:H3GKD4
Yep. Given the problems you've been having, stay away from the currently alpha ICS builds that are floating around.
Frankly, that's a disaster waiting to happen.
Wait until CM (or someone else) releases something that's stable and has most things working in 4-6 weeks or so.
There's a ton of roms/kernels out there, do your research/reading & ask questions if necessary in the respective threads for those & then pick something out & try it.
And no, I don't do recommendations. Because nobody's phone come's out of the factory the same, nobody has the same phone setup & nobody uses the phone the same way.
owen5y said:
All good, I installed the firmware and was able to get into recovery mode from there. Did a factory reset because I was stuck in a boot loop. Going to give it a go again to upgrade to the new ics build. Any advice on the best process of getting there?
I installed the following firmware prior to the reset
UK
XWKE1:http://www.multiupload.com/15RY5CHHW9
Firmware info: PDA: XWKE1 Phone: NEKD5 CSC:H3GKD4
Click to expand...
Click to collapse
OK, I did like the Galnet Miui ICS rom I was running although there was a few bugs with it when it died it was difficult to charge again. That's fair if you don't want to give out recommendations it's shooting in the dark over the interenet I suppose. I will have a good look through the forum and se if I find something that I would think is suiting.
Thanks for your help, and the advice is appreciated
Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.
Hi all.
The usb connector broke on my galasy s2 and had to take it to service.
All i asked them not to change my 4.04 version. But they did it anyway! Jeesh!
They put the 4.12 on it, which doesnt suit me.
Is there a way to get 4.04 back?
Can i just flash my previous 4.04 back with odin?
Or use stock recovery or CWM recovery to install the whole package?
When i had 4.04 i did a full backup with CWM recovery, but the file size is so small so it cannot contain the whole OS.
I come from Nokia world where downgrading was not possible so thats why im asking before trying things on my own and breaking it.
Please help.
Thank you.
Yes you can use Odin to go back to 4.0.4......but I'd advise you go to 4.0.3 instead.......4.0.4 stock firmwares are affected by the emmc brickbug which has turned *some* S2s into irrecoverable paperweights.
Whether your phone is one of them or not.....I don't know (you can check this)
For the firmware, go to www.sammobile.com/firmwares to find the correct firmware for your phone/carrier, download, unzip to tar and flash via Odin......simples
sent from either my Alliance powered S2 or my ArcoCM powered W via XDA Developers App
Find which variant you have first. Go to about phone in settings and see if you have I9100G or I9100, if you have I9100G we have all stock firmwares on our development forum, i advise you to go there, i don't know if our variant has emmc brickbug but you can search it.
Thank you for the replies.
I once ran the emmc brick bug check and it said i dont have the bug
My phone is I9100.
Is there anything i need to know about odin, or just connect, click PDA, choose the Firmware and hit start?
I downloaded the correct stock FW from sammobile.
Thanks again.
Nuppi said:
Thank you for the replies.
I once ran the emmc brick bug check and it said i dont have the bug
My phone is I9100.
Is there anything i need to know about odin, or just connect, click PDA, choose the Firmware and hit start?
I downloaded the correct stock FW from sammobile.
Thanks again.
Click to expand...
Click to collapse
Yes, if you get bootloop wipe data from recovery.
Just to report back.
I flashed the old 4.04 stock firmware with odin.
Flashing went fine, but when rebooting the phone got stuck at the samsung logo and didnt go further.
Removed battery, put it back, booted stock recovery and wiped everything and phone worked.
So all went just great :=)
This was my first android flash and after this success i might wanna concider some custom ROM:s like cyanogen, but thats another story.
Thanks for the tips peeps.