im using cool3d honey V6 since many days, few days back onwards im facing the problem of detecting usb connection to pc, if i connect original usb data cable it is simply showing the charging indication. i flashed again and re installed the rom, problem repeats again. im unable to connect my flye in disk drive mode, its showing nothing when i connect its simply charging guys what to do??
Try going into recovery and clearing cache and Dalvik, then reboot. That clears this bug every time its happened to me.
Related
ok have done a search and no answers...
this morning my s2 running leomars latest 2.7.1 rom would not come out of sleep i could feel the haptic feedback like the phone was awake but screen was off. Was stuck, so restarted by holding down power button, it came on but was still not responding, force closes, could not do anything, after another restart it was pretty much unusable, but i was still receiving emails etc but the screen would not come on.
Next step restarted in CWM and flashed leomar rom again, this got phone working and all seemed well until I tried plugging into pc, and there was no usb notification, there was just a tone to notify that phone is charging. I tried different usb ports, also a different cable but no luck, and USB debugging was ticked.
Now i dont know if what happened earlier caused the usb problems but i can only assume so. I have also just wiped phone and flashed rom and still no luck, everything seems ok otherwise.
i am worried there is some issue with the usb socket itself on phone but was wondering if anyone had any ideas?
The only two things that i changed yesterday was fitting a new anker 1900mah battery and installing the locale app.
What kernel are you using?
I was on speedmod T41, after wipe and reflash back on CF-Root which is in base of leomar75 2.7.1 rom.
Try to reinstall samsung kyes drivers.
garf02 said:
Try to reinstall samsung kyes drivers.
Click to expand...
Click to collapse
i will try but, there is absolutely nothing on either side to show phone is plugged in apart from the tone to notify phone charging. if it was drivers i would get a notification but there is nothing on pc, nothing to show there is something plugged in USB port.
On phone there is no notification at all, either with debugging ticked or unticked....I can even tick and untick debugging with cable plugged in which cannot be done normally.
Uninstall kies from computer
Wipe cache
dalvik
reinstall cfroot
reinstall kies on computer
attach phone, wait for drivers to install.
re test
If you are using MSI OR Gigabytesboards make sure charging mode is off.
Sent from my GT-I9100 using XDA App
Fairly standard response to f&&&& firmware flashes phone /PC cannot see each other .
Fix is to try clean wiped phone and stock rom .
Clean = format via Recovery SD Card Data Cache Dalvik & System .
Phone empty flash via download mode stock rom .
Reset rom counter to zero to restore warranty .
jje
JJEgan said:
Fairly standard response to f&&&& firmware flashes phone /PC cannot see each other .
Fix is to try clean wiped phone and stock rom .
Clean = format via Recovery SD Card Data Cache Dalvik & System .
Phone empty flash via download mode stock rom .
Reset rom counter to zero to restore warranty .
jje
Click to expand...
Click to collapse
will try this now, reinstalling kies and wiping cache/dalvik did not help. sorry the reponse regarding the type of board and charging mode i did not get?
JJEgan said:
Fairly standard response to f&&&& firmware flashes phone /PC cannot see each other .
Fix is to try clean wiped phone and stock rom .
Clean = format via Recovery SD Card Data Cache Dalvik & System .
Phone empty flash via download mode stock rom .
Reset rom counter to zero to restore warranty .
jje
Click to expand...
Click to collapse
ok clean rom KI3 from samfirware, just started up after flash via Odin and ...nothing, still the same, little buzz to notify that its charging and plugged in but still no usb notification!!
just tried on another pc (should have done this earlier) and nothing, pc and phone cannot see each other.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
update
from stock rom gone back to leomar using cf root, used titanium to restore the main apps, after much messing around i managed to get usb connected BUT it goes on and off and switching between usb and car mode?? i took cable out and it now and again switches on and off to car mode of its own accord, and i hear the sound notification as if the cable is put in but the cable is not in.
does this sound like a hardware problem?
update
done some more searching, and could be dirty/damaged microusb connector, cleaned a little with brush and can get a steady usb connected when cable is put in.....
Hey,
SGS II without any reason turned off and didn't want to turn on. I had to remove battery and plug it in again. Then phone booted but only to Samsung Galaxy S II logo.
I reflashed ROM via CWM (is accessible). Cleared dalvik cache and partition cache. Nothing helped.
What more can I do?
I can't reflash phone via Odin because Windows won't detect phone which is in boot logo freeze.
Restore backup or factory reset/wipe ?
During making backup of current ROM I got error that making backup of /data was not possible.
I restored image from older time and it went smoothly. Then suddenly again I got such error after while I plugged cable to USB port.
hope it helps
Burgscheinkerkdeiktraast said:
During making backup of current ROM I got error that making backup of /data was not possible.
I restored image from older time and it went smoothly. Then suddenly again I got such error after while I plugged cable to USB port.
Click to expand...
Click to collapse
try a fresh install.. it mean wipe data, cache and system.. download ultimate kernel cleaning.. and flash all new ones at once.. dont reboot if you aren't finished at least flashing ROM and kernel.. (flash modem : optional)
I made restore, didn't plug USB in yet. So far is OK. If not USB, why then restored system would have had failure too?
This could be totally unrelated, but I am just throwing it out.
Everything was working normally, and one day I noticed that USB mass storage was malfunctioning.
When I turn on USB mass storage and connect to PC, it only connect for a minute or so, then internal and external SD get disconnected without any warning.
When this happens, if screen is on I can see the USB droid turn from orange (connected) to green (disconnected),
but the phone completely freezes on that screen unresponsive. If screen is off, it just freezes with a blank screen.
I have to pull the battery to get out.
Factory reset, wiping, restoring to an old nandroid, using different cable, connect to another PC, nothing helped.
Then by accident, I connected the phone without external SD in it and the phone connected just fine indefinitely.
So, I took the SD card, formatted it on PC, put it back in the phone and tried connecting to PC. It works fine.
I have no problem with USB connection now, and I hope it stays that way.
Burgscheinkerkdeiktraast said:
I made restore, didn't plug USB in yet. So far is OK. If not USB, why then restored system would have had failure too?
Click to expand...
Click to collapse
Everytime I plug in Nook Charging cable it keeps booting over and over. If I plug in my samsung galaxy cable it charges but the moment I plug in it just turns off completely and wont turn on until I unplug. I originally had a dual boot system running for 1.4.0 which is my nook version and tried to do a recovery which said successful from the file I created but when I rebooted the whole system didnt know what to use for what and kept asking then crashing. I factory wipe/reset after the problem started and upgraded to CM10 cynogen mod with the new JellyBean no duel boot. RUNS AMAZING. But the charging problems still remains, even when I booted stock after factory reset it was still doing this. I have CWM installed internally. Please help me I have looked over many threads one said it was an update problem created with AdobeFlash updates and I tryed to flash the fix listed but it just says error during install and aborts. Also it will stay on during the cynogen mod boot screen even if i plug in either charger but at the top it just says "Charging Disabled" says the precent. I left it plugged in at this screen and it didnt charge one percent after 30 minutes.
I just want to charge it and have it on at the same time. Please any help, any ideas and comments is appreciated. Thank You
i have this problem too. I'm using CM10. My battery died and wouldn't charge no matter how long I had it plugged in for.
Then recently it turned on, but when it is plugged into the wall, it just constantly reboots.
Any help?
Hello.
I'm having an issue with my I9100.
What's wrong:
- the phone reacts with connecting it to a charger/usb with lag, it recognizes the connection and disconnection after unpluging after +/- few seconds-1 minute
- usb connection with PC doesn't work until restart, after restart I'm able to connect once and everything works fine until disconnecting, after disconnecting, the "connected as media device..." message on the toolbar remains, the usb doesn't react anymore until i reboot, but I'm still able to charge, connection via Odin in Download mode doesn't freeze and works fine every time
- have had having issues with overvoltage, when 100% and still connected to charger, the touchscreen feeled "funny", wasn't as exact as usually, was flittering aso., after disconnecting, the problem was solved
- after putting the battery out getting bootloop, no matter which rom, only thing, that i'm able to do then, is to switch into download mode and flash new rom via odin
what have I tried:
Full wipe with flashing stock samsung firmware (XXWLS), reinstalling usb drivers, cleaning the usb port with air, didn't help.
Anyone has an idea, what might cause the problem and how to fix it?
P.S. Now it doesn't recognize, that charger is unplugged after charging. Chared it 100%, disconnected, but the message "battery charged..." remains after disconnecting.
Anyone?
Hello guys, i come to you with a problem with my phone. I've a Samsung J7 Prime SM-G610M/DS with Stock ROM.
Everything started when a new update came to install like a week ago. It downloaded it correctly and started update process.
In the middle of it, it ran out of battery.. So it began..
1) The phone is practicaly not charging. If i plug it to an USB port or directly to the wall, charges like 6% every 24 hours. Sometimes it doesn't charge at all. Note: whenever i plug it, the battery-charging animation does not work properly. Just turns the battery icon with the lightning in it and then turns off the screen, not showing battery percentage or animation whatsoever. Battery is non removable and tried cleaning charge port.
2) If i put it on Download Mode, computer doesn't recognize it. It is not a drivers issue. I've another Samsung J7 Prime and it connects correctly. I must discard everything Odin-related.
3) In recovery mode, i've emptied cache and did several factory resets with no luck. If i turn it in a regular way, it tries to apply some update but changes to "No command" view.
4) I tried downloading the last stock version and putting it on an SD. Formatted it correctly but when i try to update from SD in recovery, a message comes up: "Couldn't mount /sdcard".
I'm starting to loose my mind here guys.. Please give a hand or a clue!!
Thank you very much.