Everytime I plug in Nook Charging cable it keeps booting over and over. If I plug in my samsung galaxy cable it charges but the moment I plug in it just turns off completely and wont turn on until I unplug. I originally had a dual boot system running for 1.4.0 which is my nook version and tried to do a recovery which said successful from the file I created but when I rebooted the whole system didnt know what to use for what and kept asking then crashing. I factory wipe/reset after the problem started and upgraded to CM10 cynogen mod with the new JellyBean no duel boot. RUNS AMAZING. But the charging problems still remains, even when I booted stock after factory reset it was still doing this. I have CWM installed internally. Please help me I have looked over many threads one said it was an update problem created with AdobeFlash updates and I tryed to flash the fix listed but it just says error during install and aborts. Also it will stay on during the cynogen mod boot screen even if i plug in either charger but at the top it just says "Charging Disabled" says the precent. I left it plugged in at this screen and it didnt charge one percent after 30 minutes.
I just want to charge it and have it on at the same time. Please any help, any ideas and comments is appreciated. Thank You
i have this problem too. I'm using CM10. My battery died and wouldn't charge no matter how long I had it plugged in for.
Then recently it turned on, but when it is plugged into the wall, it just constantly reboots.
Any help?
Related
Hello i have recently updated my ROM but sadly something happened with my service, it just said "no service" and i wasn't able to receive or take any calls so i installed this rom again from the recovery, and then when i rebooted this device, it suddenly stopped on the green goblin logo loading screen and my device was unrecognized by a PC, recovery didn't work... so i tried a RoFUSiON which can install a rom through the pc but my device, as i said, wasn't and isn't recognized anymore. What i can do? i can't even charge it, last night i connected it to the charger and let it on. When i woke up and unplugged it, it had no battery! probably it wasn't chargning, it was discharging, and the only way i can turn my mobile on, is plugging it to the usb, doesn't matter if into the power socket or usb-to-usb, even the screen lights up without the battery but still i can't go to the recovery or fastboot (probably, because as i said my device isn't recognized so either that's the problem either fastboot doesn't work). Here's also the video about this, maybe someone can help me since i don't know what to do.. thanks in advance.
http://www.youtube.com/watch?v=pzUQA-PNI4A
Hi,
I'm having this problem for a while and don't remember exactly how it occurred, if I remember well, it started happening after flashing a non-stock ROM with CWM, but can't really reproduce it.
Current CWM is Cyanogen CWM-based recovery v5.0.3.2. The problem persisted even when upgrading the ROM to 4.2 (PacRom).
Anyway, as for the problem itself, when I plug-in the device to charger while its off, I see a legacy loading star similar to this one for like 5 secs, then comes up the battery icon for a couple of seconds, and device is turned off again for another 3 seconds. The whole routine repeats over and over infinitely.
Note, that the device warms up during the charging process while it's turned off.
How to solve this?
NullUser said:
Hi,
I'm having this problem for a while and don't remember exactly how it occurred, if I remember well, it started happening after flashing a non-stock ROM with CWM, but can't really reproduce it.
Current CWM is Cyanogen CWM-based recovery v5.0.3.2. The problem persisted even when upgrading the ROM to 4.2 (PacRom).
Anyway, as for the problem itself, when I plug-in the device to charger while its off, I see a legacy loading star similar to this one for like 5 secs, then comes up the battery icon for a couple of seconds, and device is turned off again for another 3 seconds. The whole routine repeats over and over infinitely.
Note, that the device warms up during the charging process while it's turned off.
How to solve this?
Click to expand...
Click to collapse
Afaik, this behavior is normal. When the device is off and you plug it in via a wall charger, it's fine; it boot's up and shows the battery charging icon. However, if you plug it in via a USB port on a computer, you enter an endless boot loop.
Afaik, the only solution is to charge the device via a wall charger, or turn the device on normally and charge via any source you want.
Note: I have flashed back to stock just to test this and it behaved the same.
Note: Jelly bean roms seem to have an additional issue where, when you reboot the device while it's plugged in (any source), the device goes into the "charging only" mode. If you are plugged into a USB port then you end up in the above mentioned boot loop. The solution to that is to simply unplug the device before rebooting...
I'm havin problems with offline charging after i installed cm11. I've tried change kernel and change rom (i'm using PA rom now) and i'm still with the same problem.
When i plug the charger on my phone while turned off, it shows a battery icon with a question mark on it and i think it's not charging. Is this a general problem or did i make something wrong?
Try keeping it plugged in. See if it charges or not.
Also,did you change your bootlogo?
I didn't change my bootlogo. it boots motorola bootloader and then shows the battery icon with the question mark. I left my phone charging this way for a couple of hours and tried to turn it on. my phone booted with 0% battery and then shutted down, so definitely it is not charging. other thing I notice is that when my phone enter this buggy offline charging mode, I have to press power button + volume down to reboot my phone, it kind of get stuck in this mode when my phone enter it
Try using a different charger.
It doesn't seem to be a common issue.
Can you power up the phone whilst charger connected.?
I've tried two different chargers, one of my Moto X and the original one. If I want to charge the phone I need to turn it on first and then plug the charger. I can't turn it on with the charger on cuz it is stuck on that screen with the battery icon
I'm starting to think I've done something wrong. I did the following to get where I am right now:
I was on stock firmware, so I rooted the phone and installed the newest version of SS. Then I downloaded cm11 and gapps and copied to the phone. I entered the SS and wiped everything. After that I installed cm11 and gapps.
When I discovered that issue I've tried install JBX kernel to fix it and nothing. then I wiped everything again and installed PA rom + gapps and still that issue. Did I do something wrong?
No, you didn't do anything wrong.
Since its persistent across both ROMS, its not a ROM issue either.
In my opinion, its most probably a problem with port or the board. The port doesn't deliver enough power.
You can try flashing the stock ROM back, it might repair in case something s/w related is corrupted. If it doesn't work after that, then its a h/w glitch for sure.
just in case, if I install stock rom and the problem goes away, what might be causing this problem?
I can't re-flash stock rom because I can't charge my phone and I can't boot into the rom or recovery. I don't think fastboot charges my phone. I just realized that bootloader is locked. Maybe this is the problem, isn't it?
it isn't a h/w glitch because before cm11 it was OK to charge offline
You'll need a factory cable to flash in case your phone has insufficient power.
Look for it, there's a guide about making one in the general section I suppose.
No need, I've managed to charge the phone through USB on my pc. When I plug the charger on my phone, that glitch happens, but when I plug the USB on my pc, the phone lights up a white led and apparently it charges the phone (slower, but charges). That's really weird. I really want to know what is happening to my phone
Hello guys, i come to you with a problem with my phone. I've a Samsung J7 Prime SM-G610M/DS with Stock ROM.
Everything started when a new update came to install like a week ago. It downloaded it correctly and started update process.
In the middle of it, it ran out of battery.. So it began..
1) The phone is practicaly not charging. If i plug it to an USB port or directly to the wall, charges like 6% every 24 hours. Sometimes it doesn't charge at all. Note: whenever i plug it, the battery-charging animation does not work properly. Just turns the battery icon with the lightning in it and then turns off the screen, not showing battery percentage or animation whatsoever. Battery is non removable and tried cleaning charge port.
2) If i put it on Download Mode, computer doesn't recognize it. It is not a drivers issue. I've another Samsung J7 Prime and it connects correctly. I must discard everything Odin-related.
3) In recovery mode, i've emptied cache and did several factory resets with no luck. If i turn it in a regular way, it tries to apply some update but changes to "No command" view.
4) I tried downloading the last stock version and putting it on an SD. Formatted it correctly but when i try to update from SD in recovery, a message comes up: "Couldn't mount /sdcard".
I'm starting to loose my mind here guys.. Please give a hand or a clue!!
Thank you very much.
The phone has successfully been flashed with a few different firmwares since the bootloop started occurring. the phone will only power on when the cable is plugged in but it will show the samsung screen and then start the "Installing system update" screen and then instantly go to "No command" and then boot back to the samsung screen to repeat the process. download mode is accessible but i cant get into recovery mode to reset the cache or perform a factory wipe.
The cable is fine and the usb port on the phone let me flash software via odin so i don't understand why it only powers on with a cable plugged in.
Could this be a battery issue? i'm very new to this website and the software end of phone repair stuff so any help is greatly appreciated!
i'm currently running 7.0 firmware G890AUCS7DRF2 from boxwares but the bootloop has been occurring since before i even tried to flash anything.
Also, all of my drivers seem to be up to date so i don't think that's posing any issues.
Thanks so much in advance!
Hi , try to clean the charging port of your phone with 100% alcohol and with clean toothbrush also you can use needle to clean the usb port contact.
Another what you can do is to put your phone into the charger for abot 30 minutes and see if your phone is become to hot on the back side what can be sign of bad charging port or probably dead battery .