Hey people, I just bought a new Atrix a week ago. It came with "4.4.20.MB860.O2.en.DE" (fw 2.2.2)rom. I found on the internet that it should be possible to update to 2.3.4. But when I try to do the OTA update it says that my system is up to date. So, Is it possible to update my phone to 2.3.4? How? I found a rom called "1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31-release-keys-signed-rtdach.sbf" but Im aware of flashing it with RSD, is there some other way to do that?
PS: I have not roted or unlocked bootloader my Atrix yet..
Thanks everyone!
Maathy said:
Hey people, I just bought a new Atrix a week ago. It came with "4.4.20.MB860.O2.en.DE" (fw 2.2.2)rom. I found on the internet that it should be possible to update to 2.3.4. But when I try to do the OTA update it says that my system is up to date. So, Is it possible to update my phone to 2.3.4? How? I found a rom called "1FF-olympus_emara-user-2.3.4-4.5.2A-74_OLE-31-release-keys-signed-rtdach.sbf" but Im aware of flashing it with RSD, is there some other way to do that?
PS: I have not roted or unlocked bootloader my Atrix yet..
Thanks everyone!
Click to expand...
Click to collapse
If you want to upgrade i would recommend to unlock the bootloader and flash some GB based rom like Nottachtrix 1.3.1, those ones are the stock rom but enhaced I'm running right now Nottachtrix because i want everything working.
Otherwise you can get Neutrino, it's an excellent rom too.
About the sbf with RSD, you need to flash the correct sbf otherwise you will get the "failed to boot", so if you are not sure if it is for your phone, don't do it, take the safe way.
Im not sure pretty much about anything since all tutorials, files, etc.. are made for 2.3.4.. I found this post about rooting the Atrix. Should it work? And another stupid questions. Custom ROMs are installed using CWM recovery right? And is it possible to make a backup of my actual rom for applying waranty in the future? And about that sbf im pretty sure that it should work, but I want to hear that from someone that already did that. I just do not want to brick my phone after week of using..
Thanks! M.
Related
Hey guys. This is my first post on this forum, although I've been lurking for quite some time.
When 2.1 had just come out, there was an X10 flasher that would flash 2.1 to X10a phones, which was great for people like me who were on AT&T and hadn't gotten the update yet (and STILL haven't). I noticed that there's a 2.1 rom for the X10a and I was wondering if there's any reason I should switch over to that. If so, can I just use the flashers listed over in that forum, or is there something I need to do to my X10a now that it's running an X10i firmware?
This is sortof related, as well. I want to install xrecovery, so I downloaded the Busybox installer from the market, but it won't install. Surely not because of my X10i firmware, eh?
I apologize for the newbie questions. This is my first android phone and I'm still learning all of the intimate details of the OS.
naezwood said:
Hey guys. This is my first post on this forum, although I've been lurking for quite some time.
When 2.1 had just come out, there was an X10 flasher that would flash 2.1 to X10a phones, which was great for people like me who were on AT&T and hadn't gotten the update yet (and STILL haven't). I noticed that there's a 2.1 rom for the X10a and I was wondering if there's any reason I should switch over to that. If so, can I just use the flashers listed over in that forum, or is there something I need to do to my X10a now that it's running an X10i firmware?
This is sortof related, as well. I want to install xrecovery, so I downloaded the Busybox installer from the market, but it won't install. Surely not because of my X10i firmware, eh?
I apologize for the newbie questions. This is my first android phone and I'm still learning all of the intimate details of the OS.
Click to expand...
Click to collapse
There is no reason to switch if you are happy with your current FW. However, if you want, yes you can choose the flash tool on here to switch from one 2.1 version to another. Regarding busybox, you need to be rooted to install it.
I'm rooted. I think the problem with busybox is my microsd is currently in my nook. I just rooted it yesterday.
Anyway, the reason I want to switch firmware is because I'd like to try out some custom roms. I just wanted to make sure there wasn't anything I needed to do other than use the flasher before flashing my phone. My friend somehow managed to screw up his Xperia the other night when flashing the old 1.6 rom. We're still trying to figure out the problem.
naezwood said:
I'm rooted. I think the problem with busybox is my microsd is currently in my nook. I just rooted it yesterday.
Anyway, the reason I want to switch firmware is because I'd like to try out some custom roms. I just wanted to make sure there wasn't anything I needed to do other than use the flasher before flashing my phone. My friend somehow managed to screw up his Xperia the other night when flashing the old 1.6 rom. We're still trying to figure out the problem.
Click to expand...
Click to collapse
You can NOT flash from 2.1 to 1.6 with the normal method. You need to download the AT&T unbrick FW and use it with the flash tool. Hopefully, this will solve your friend's problem.
Thanks so much! I'm going to test it out on mine before I try to tell him how to do it (he's not very tech savvy. haha).
I have to disagree. I have ATT and I originally flashed the x10a Brazil Generic and I had Voice Search. I just tried the newest x10i .24 update and I lost the Voice Search (google app that is only currently available in the USA and Froyo 2.2 or with factory software). I just flashed back with the Global x10a and the Voice Search tab (microphone) showed up for a second on first start, but quickly disappeared and the normal tab (magnifying glass) showed up. I am currently searching to forums looking for the Brazil x10a version to reflash my phone and get my voice search back...it is far and away the best feature on my phone...I hope I can find it.
Hi all
I am a little bit confused?
I got my gf (girlfriend) a motorola atrix from website called PANAMOZ when it arrived I found out it was ME860 (HKTW) not MB860 (ATT 4G)
Some of the stuff was in chinese like keyboard etc etc.
I was going to get her a SGS II same as what I have but she said it was too big for her.
Now the problem I have got is it is running android 2.2.2 and my SGS II is on android 2.3.4
How can I get the motorola atrix ME860 on android 2.3.4?
Do I root it, sbf it via RSD lite, unlock bootloader (if so how),fastboot vol up vol down, etc etc.
I have been reading for 2 days on xda forum and I think I am going to go crazy!
My last moto was the wings! and with my nokia's, HTC, iphones, Blackberry's and Samsung's I have not had any problems updating to latest official or un-official firmware.
So all I would like is some help and support for you guys to get the atrix ME860(HKTW) on gingerbread 2.3.3 or 2.3.4
She is not interested in all types of mods or flashing custom roms every other week!
Just a stable phone that won't let her down and yet be SMART.
Thank you in advance for all your help-advice-tutorials-link
Go to Motorola.com find the atrix and ask them how to update, if your not trying to unlock or root. They should be able to help you.
My overclocked alien atrix
Thank you for your input, I don't mind rooting/unlocking it, its just I don't want to end up bricking it.
I have been reading about using RSD and putting on 1.2.6 then root but when I try that, RSD lite just says fail. When I try the HKTW sbf (4.0.500) it does work but it gives me android 2.2.2 froyo on chinese firmware.
I live in UK and don't mind installing US, UK, EU firmware/sbf its just working out how and in what order I need to do this. I have managed to root it using gingerbreak 1.20apk
your further input is most appreciated thank you.
jtheproducer said:
Thank you for your input, I don't mind rooting/unlocking it, its just I don't want to end up bricking it.
I have been reading about using RSD and putting on 1.2.6 then root but when I try that, RSD lite just says fail. When I try the HKTW sbf (4.0.500) it does work but it gives me android 2.2.2 froyo on chinese firmware.
I live in UK and don't mind installing US, UK, EU firmware/sbf its just working out how and in what order I need to do this. I have managed to root it using gingerbreak 1.20apk
your further input is most appreciated thank you.
Click to expand...
Click to collapse
What happens when you just check for software update in the settings?
If that doesn't work then another option I suggest is to fruitcake up.
1. unlock your bootloader (follow the instructions in the International House of Pudding thread in development).
2. Install RomRacer's Recovery (also in development forum)
3. download the HKTW fruitcake in samcripp's fruitcake thread
4. install fruitcake via recovery you installed in step 2
mysticdrew said:
What happens when you just check for software update in the settings?
If that doesn't work then another option I suggest is to fruitcake up.
1. unlock your bootloader (follow the instructions in the International House of Pudding thread in development).
2. Install RomRacer's Recovery (also in development forum)
3. download the HKTW fruitcake in samcripp's fruitcake thread
4. install fruitcake via recovery you installed in step 2
Click to expand...
Click to collapse
it lets me update to 4.0.560 chinese version, after updating not much changes still android 2.2.2 froyo.
will have a look a fruitcake
Many thanks
It sounds like you/your girlfriend don't really need to unlock (which may or may not be safe with the ME860, since it is a different device).
What I would do is search for 2nd init and get the 2.3.4 HKTW sbf and use the /system from that build. Unfortunately you cannot flash it directly since it is test-keys signed not signer for end user use. You're going to have to do some digging around to find all the stuff you need. Your other option is to unlock and flash the /system and boot.img through fastboot.
Or you can learn Mandarin / Chinese and surf the HKTW forums to see if they can give you an (un)official HKTW sbf/rom.
the2dcour said:
It sounds like you/your girlfriend don't really need to unlock (which may or may not be safe with the ME860, since it is a different device).
What I would do is search for 2nd init and get the 2.3.4 HKTW sbf and use the /system from that build. Unfortunately you cannot flash it directly since it is test-keys signed not signer for end user use. You're going to have to do some digging around to find all the stuff you need. Your other option is to unlock and flash the /system and boot.img through fastboot.
Or you can learn Mandarin / Chinese and surf the HKTW forums to see if they can give you an (un)official HKTW sbf/rom.
Click to expand...
Click to collapse
Muuuuuhhhh........
Stop pulling his leg the2dcour.
As for ur HKTW, go to youtube and watch how to upgrade atrix 4G.
Ha ha ha cant stop laughing.... you joker the2dcour.
Hi there,
I have an Atrix, carrier unlocked phone on the Rogers network running froyo. I would like to upgrade to the latest gingerbread firmware available on the Motorola website. I have a couple questions before I attempt this:
1. Dose it matter which carrier firmware I use, the AT&T or the Bell? If so how do I know which is the correct one to use? Since I bought the carrier unlocked phone off ebay it could be either an AT&T or a Bell.
2. Will the carrier unlock survive the firmware upgrade? Or am I going to have to get my hands on an other unlock code or something?
3. I am thinking about getting a dock so I can use the webtop thing. I have read that there is limits on the webtop based on your data plan. Is there something that needs to be modified to have this work or does the unlocked carrier bypass any of the these restrictions an allow the webtop to work?
Any help on this would be appreciated.
Thanks
74corvette said:
Hi there,
I have an Atrix, carrier unlocked phone on the Rogers network running froyo. I would like to upgrade to the latest gingerbread firmware available on the Motorola website. I have a couple questions before I attempt this:
1. Dose it matter which carrier firmware I use, the AT&T or the Bell? If so how do I know which is the correct one to use? Since I bought the carrier unlocked phone off ebay it could be either an AT&T or a Bell.
2. Will the carrier unlock survive the firmware upgrade? Or am I going to have to get my hands on an other unlock code or something?
3. I am thinking about getting a dock so I can use the webtop thing. I have read that there is limits on the webtop based on your data plan. Is there something that needs to be modified to have this work or does the unlocked carrier bypass any of the these restrictions an allow the webtop to work?
Any help on this would be appreciated.
Thanks
Click to expand...
Click to collapse
1) yes it matters. How did you plan on updating? To check what firmware you are on go to settings about phone
2)yes the unlock should survive it gas to do with the sim.
3)The limits for webtop have to do with AT&T and their limits on tethering
sent from my Atrix via XDA premium
Thanks for your response. As for the update I was planning on following the instructions on the Motorola website. Copy the firmware file to the SD card and then select system upgrade.
yeah i dont think that will be a problem, just check what firmware you have
BUT i would reccomend using a custom ROM
Reasons
-they are based off motorolas firmware and are very stable
-tweaked to give better performance
-are deodexed. meaning you can apply themes to your hearts content and really personalize your phone
Hi marko! thanks for your help on this. What rom would you recommend? I am looking for stability and speed, over themeing and customization.
74corvette said:
Hi marko! thanks for your help on this. What rom would you recommend? I am looking for stability and speed, over themeing and customization.
Click to expand...
Click to collapse
After having tried them all, Nottach's DarkSide is the fastest & most stable. Also ext4. Make sure you do a fastboot wipe before you install it so that you start on a clean system!
Happy flashing!
You don't have an update available via OTA yet?...
Sent from my MB860 using xda premium
So after doing some reading and poking around in the dev forum I think I am going to not bother with the stock Motorola firmware and go straight into a custom rom as you guys have suggested. I have a couple quick questions first, and would appreciate any guidance on the best, safest and easiest way to do this. I have read through the, noob and flashing threads but I can’t seem to find a definitive answer to this.
So since I am running stock froyo, is the install as simple as unlock bootloader, root phone and load on romracers CWM and flash away? Or do I need to worry about gingerbread bootloaders? My understanding is not all roms have bootloaders in them.
OR do I use RSD lite and loaded on the stock 2.3.4, unlocked .sbf file, root phone and load romracers CWM and flash. Which I think this method you can no longer go back to froyo, if need be for whatever reason.
I would prefer to keep the froyo option open, but I am not married to it. Plus I would prefer to do this not using RSD lite as I have had some bad experiences in the past flashing my Samsung cappy with the PC program odin.
Thanks again for your help.
I am running motorola software update and everytime I try I get there is no software update at this time. I want to re-install the offical motorola atrix att update but seem unable to. My att atrix is rooted and is running the stock rom.
is your phone from at&t? as far as I know, there's no recent update since 2.3.4 was released.
Yeah what are you talking about? It sounds like you are on stock already, just rooted.
Sent from my CM7 Atrix 4G
Why do you want to install the latest again if you are currently running it, which it appears you are if there is no update available?
If you want to just reinstall your stock ROM, and you are already on the latest ROM, you cannot do this through update. You will have to flash the latest ROM (which would be your current version) via other means such as RSDLite and a SBF, or via fastboot per the following link:
http://forum.xda-developers.com/showthread.php?t=1163342
Link above is for AT&T device.
It is adviseable to NOT flash a SBF though.
Simple search and some reading will give you all the information you need, but it sounds like you probably have no experience or you wouldn't be asking this, so I would say to be very careful and/or not do anything with your phone if stock is what you want.
Hi!
Im proudly owner of motorola milestone. It was great phone with blocked bootloader, but I'm old and I had in my live some "normal phone" so I didnt cry about locked BL. I simply dont need unlocked BL because in time when I play with Stone We had a lot of rom by recovery.
But from time when I made some weird things took a lot time and a lot of things change in new smartphones so I have some questions for You.
1) On milestrone I could without problems update 2.1>2.2 and downgrade it to 2.1 with official sbf, and I know Atrix has official update from 2.2 to 2.3. I still can make this without problems? (from 2.2>2.3>2.2 and other ways...)
1a) I saw news about update to ICS, and it Was on motorola page (forgot which one). It will be in this year? (official q3 2012)
2)Do I need to unlock BL to use "roms" from recovery? Or I need recovery only?
(like neutrino / cm7)
3) I will not use any of atrix accessories, it will be for me mp3 player, phone and maybe sometimes game console. I still need to unlock BL? And if yes, for what?
3a) when we are speaking about games, every rom fully support tegra?
4) Is something what I need to know about atrix 4g before I will purchase it?
5) Can any user of this phone who live in germany tell me what about using germany mobile network?
sorry for lame questions and thanks for answers
Aesandar said:
Hi!
Im proudly owner of motorola milestone. It was great phone with blocked bootloader, but I'm old and I had in my live some "normal phone" so I didnt cry about locked BL. I simply dont need unlocked BL because in time when I play with Stone We had a lot of rom by recovery.
But from time when I made some weird things took a lot time and a lot of things change in new smartphones so I have some questions for You.
1) On milestrone I could without problems update 2.1>2.2 and downgrade it to 2.1 with official sbf, and I know Atrix has official update from 2.2 to 2.3. I still can make this without problems? (from 2.2>2.3>2.2 and other ways...)
1a) I saw news about update to ICS, and it Was on motorola page (forgot which one). It will be in this year? (official q3 2012)
2)Do I need to unlock BL to use "roms" from recovery? Or I need recovery only?
(like neutrino / cm7)
3) I will not use any of atrix accessories, it will be for me mp3 player, phone and maybe sometimes game console. I still need to unlock BL? And if yes, for what?
3a) when we are speaking about games, every rom fully support tegra?
4) Is something what I need to know about atrix 4g before I will purchase it?
5) Can any user of this phone who live in germany tell me what about using germany mobile network?
sorry for lame questions and thanks for answers
Click to expand...
Click to collapse
1. No. Due to bootloader changes between 2.2 and 2.3 you can't just use an sbf. You can however flash a fruitcake which is just a copy of the boot and system partitions. Doesn't do anything to the bootloader. Your bootloader needs to be unlocked to do this and you will need to flash a customer recovery program such as CWM. However, you can use an sbf if you are going between the same version without unlocking the bootloader. Example 2.3.4 to 2.3.4.
1a. Yes. We will should be seeing an ICS upgrade anytime from now to September.
2. Your bootloader will need to be unlocked and a custom recovery will need to be flashed.
3. If that's all your planning to use it for then there really isn't a reason you will need to unlock the bootloader.
3a. Every rom should as far as I know.
4. Some people report that the battery gets quite hot and causes problems. I'm lucky to say that I've had the phone for over a year and haven't had an issues.
5. Sorry, can't help you with question 5, but I hope I was able to answer the rest of your questions.
so without unlock bootloader I cant use custom recovery? In my MM I have recovery and from this recovery I can start "custom" and from this custom I can recover roms...
And what about update from 2.2 > 2.3, when moto release 2.3 for atrix it should be possible to update it without unlock bootloader? Only with OTA?
For god sake, why everyone are making us soooo much problems about custom OS... This is my phone and I should make with it what I want...
Aesandar said:
so without unlock bootloader I cant use custom recovery? In my MM I have recovery and from this recovery I can start "custom" and from this custom I can recover roms...
And what about update from 2.2 > 2.3, when moto release 2.3 for atrix it should be possible to update it without unlock bootloader? Only with OTA?
For god sake, why everyone are making us soooo much problems about custom OS... This is my phone and I should make with it what I want...
Click to expand...
Click to collapse
If you are planning on flashing custom roms you will need the bootloader unlocked. Going from 2.2 to 2.3 you don't need an unlocked bootloader. You should be able to either use the OTA option, the sd card option, or the update program from moto via the pc.