Me once again, I have tried to update my yp-g1 international version many times through both kies and odin. When it is uploading factoryfs.rfs it the progress bar stops suddenly and stays there. im really stuck on this one. Does anyone know what is happening or how to fix it.
Partition Table
TheFro74 said:
Me once again, I have tried to update my yp-g1 international version many times through both kies and odin. When it is uploading factoryfs.rfs it the progress bar stops suddenly and stays there. im really stuck on this one. Does anyone know what is happening or how to fix it.
Click to expand...
Click to collapse
You need a partition table. Get the proper one for your device here: http://forum.xda-developers.com/showthread.php?p=20259805
Click the PIT button on odin, select the PIT file, then click PDA and select firmware. Hopefully it will work.
Related
Trying to revert to a BML ROM in Odin so I can try out jt's ICS source rom. I have the repartition box checked and atlas_v2.2.pit in the pit section and ED05.tar.md5 in the PDA section. Odin seems to be stuck at "FACTORYFS". Any pointers as how to get this to work? It's doing this on both Odin v1.3 and 1.7. I've also tried DL09 full odin file and it does the same thing.
UPDATE: Never mind, looks like I have to use a certain USB port.
im having a similar issue... gets hug up on factory.rfs in odin. what exactly did your phone do during process?
phoenix727 said:
im having a similar issue... gets hug up on factory.rfs in odin. what exactly did your phone do during process?
Click to expand...
Click to collapse
make sure you see a yellow box in far left of odin...should say com#, also try redownloading the files, and a bad pit file could cause that issue aswell.
Ok this is what I done
GT-I9300 UK 2 weeks old. I install I9300XXDLI 7_I9300OXADLI7_I9300XXDLI7_BTU with Odin all went fine and been using it for about a week but too many bugs on this OTA. So I wanted to downgrade back to I9300BVBLG 2_I9300ORABLG1_ORA everything went fine and I got a green PASS in Odin but when restated the phone would go no further then Samsung welcome screen and then just flashed with the blue led flashing very slow, I left it for 10mins but nothing, just the same. I closed Odin and then tried to reboot the phone..again nothing!! A friend told me to try again but this time with re-partition ticked and use this PIT GT-I9300_mx_20120220.pit with I did..hmm I wish I never!! That is when it all went Pete Tong
The phone started to re-partition got a big blue line and STOPPED!! I left it like that for 10mins before closing Odin. Now when I try to flash the phone Odin start but nothing happens!! I have a screenshot of Odin hanging but can not post it here yet
Can someone pls help me :crying:
Have you tried wiping caches/dalvik cache? Can you go t download mode? If yes, then flash the firmware again or flash another firmware.
I hope this helps
Sent from my GT-I9300 using xda premium
XTCRadioUK said:
Ok this is what I done
GT-I9300 UK 2 weeks old. I install I9300XXDLI 7_I9300OXADLI7_I9300XXDLI7_BTU with Odin all went fine and been using it for about a week but too many bugs on this OTA. So I wanted to downgrade back to I9300BVBLG 2_I9300ORABLG1_ORA everything went fine and I got a green PASS in Odin but when restated the phone would go no further then Samsung welcome screen and then just flashed with the blue led flashing very slow, I left it for 10mins but nothing, just the same. I closed Odin and then tried to reboot the phone..again nothing!! A friend told me to try again but this time with re-partition ticked and use this PIT GT-I9300_mx_20120220.pit with I did..hmm I wish I never!! That is when it all went Pete Tong
The phone started to re-partition got a big blue line and STOPPED!! I left it like that for 10mins before closing Odin. Now when I try to flash the phone Odin start but nothing happens!! I have a screenshot of Odin hanging but can not post it here yet
Can someone pls help me :crying:
Click to expand...
Click to collapse
First power down your device, Go to stock recovery(Home+power button+volume up), Select factory data reset there, Then go into download mode and flash the stock ics firmware..
Do not select re partition.
saywhatt said:
Have you tried wiping caches/dalvik cache? Can you go t download mode? If yes, then flash the firmware again or flash another firmware.
I hope this helps
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I don't know to wipe caches/dalvik cache on this phone cos I have never had to to it before. I flashed my S2 many times without any problems. I can go into download mode but every time I try and flash the phone Odin just hangs
saywhatt said:
Have you tried wiping caches/dalvik cache? Can you go t download mode? If yes, then flash the firmware again or flash another firmware.
I hope this helps
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
saranyan said:
First power down your device, Go to stock recovery(Home+power button+volume up), Select factory data reset there, Then go into download mode and flash the stock ics firmware..
Do not select re partition.
Click to expand...
Click to collapse
saranyan, I have just tried to go into stock recovery and all I get is the starting up with the white Samsung GALAXY S III etc it flashes and come back to the same white Samsung GALAXY S III start up. No Recovery mode but the phone will go into download mode
XTCRadioUK said:
saranyan, I have just tried to go into stock recovery and all I get is the starting up with the white Samsung GALAXY S III etc it flashes and come back to the same white Samsung GALAXY S III start up. No Recovery mode but the phone will go into download mode
Click to expand...
Click to collapse
Then your best bet is to connect to samsung kies, If it detects your phone it'll go to recovery mode and will try to restore it, Try connecting it to kies.
And NEVER EVER AGAIN flash the pit file if you don't know what you are doing.... This is the fastest way to brick your shiny toy ...
There are different pit files for different SGS3 models which will destroy your phone.
ultramag69 said:
And NEVER EVER AGAIN flash the pit file if you don't know what you are doing.... This is the fastest way to brick your shiny toy ...
There are different pit files for different SGS3 models which will destroy your phone.
Click to expand...
Click to collapse
I have learned the HARD WAY! I will never flash a pit file again as long as I live!! I am GUTTED!! :crying:
XTCRadioUK said:
I have learned the HARD WAY! I will never flash a pit file again as long as I live!! I am GUTTED!! :crying:
Click to expand...
Click to collapse
Did you get it fixed now by flashing another firmware?
Sent from my GT-I9300 using xda premium
saywhatt said:
Did you get it fixed now by flashing another firmware?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No every time I try and flash the phone Odin just hangs at this point "NAND Write Start" and nothing happens after this and my SG3 just as a blue line across the screen, plus Odin takes ages to start the upgrade
you probably used the wrong pit file, there are ones for the 16, 32,64Gb models
Find correct pit
Flash it on its own with repartition ticked, no auto reboot
Flash stock 3 part firmware
Hopefully this will sort it
slaphead20 said:
you probably used the wrong pit file, there are ones for the 16, 32,64Gb models
Find correct pit
Flash it on its own with repartition ticked, no auto reboot
Flash stock 3 part firmware
Hopefully this will sort it
Click to expand...
Click to collapse
Mine is 16Gb I9300 from Orange UK if someone can point me were I can get these 3 part file and pit from I will give it a go the phone is only 2 weeks old
XTCRadioUK said:
Mine is 16Gb I9300 from Orange UK if someone can point me were I can get these 3 part file and pit from I will give it a go the phone is only 2 weeks old
Click to expand...
Click to collapse
sammobile.com
jje
I have a Samsung Galaxy S3 (GT-19300) international version. I rooted it last night. Took a custom backup of ROM and backup using Titanium backup. I installed cyanogenmod 9 on it today. It was working perfectly. Then when i installed Google apps (gapps) and restarted it got stuck on the bootscreen. I hardbooted and now all i see is this fuzzy black n white screen ( like static). I tried going into clockworkmod recovery but still the same screen. However, i can still go to odin mode.
So i guess i have to install stock firmware through odin now. But i'm unable to download the firmware. All links are on hotfile and as everyone knows , it sucks :/ download stops after 2 min. Cant find a mirror also.
Any ideas what to do? have u guys also encountered a similar problem?
Can someone download and send the firmware file to me somehow(anysend or wetransfer or something)? iv tried downloading it many times but failed
Lohit13 said:
I have a Samsung Galaxy S3 (GT-19300) international version. I rooted it last night. Took a custom backup of ROM and backup using Titanium backup. I installed cyanogenmod 9 on it today. It was working perfectly. Then when i installed Google apps (gapps) and restarted it got stuck on the bootscreen. I hardbooted and now all i see is this fuzzy black n white screen ( like static). I tried going into clockworkmod recovery but still the same screen. However, i can still go to odin mode.
So i guess i have to install stock firmware through odin now. But i'm unable to download the firmware. All links are on hotfile and as everyone knows , it sucks :/ download stops after 2 min. Cant find a mirror also.
Any ideas what to do? have u guys also encountered a similar problem?
Can someone download and send the firmware file to me somehow(anysend or wetransfer or something)? iv tried downloading it many times but failed
Click to expand...
Click to collapse
Have you tried downloading the firmware from Sammobile? If you haven't I would recommend taking a look at this link here for the official firmwares for the International Model Galaxy S3, after you have selected your country and carrier, you can download the firmware and flash it through Odin. Let me know if you still have questions .
Thanks for the fast reply
Thats the problem, everytime i try downloading the firmware it just stops in the middle. Anyway, i got the 4.2.2 firmware for my mobile. I tried flashing that, it said no partitioning. So i tried re-partitioning with the .PIT file. But it get stuck on 'Get PIT mapping' with 'SET PARTITON' in white on the box above (COM)port. Doesnt go further. How do i fix it?
Lohit13 said:
Thanks for the fast reply
Thats the problem, everytime i try downloading the firmware it just stops in the middle. Anyway, i got the 4.2.2 firmware for my mobile. I tried flashing that, it said no partitioning. So i tried re-partitioning with the .PIT file. But it get stuck on 'Get PIT mapping' with 'SET PARTITON' in white on the box above (COM)port. Doesnt go further. How do i fix it?
Click to expand...
Click to collapse
Make sure you have loaded the partition file into the .pit file slot. Also I would recommend taking a look at this procedures "How to Proceed" section (Make sure to substitute the correct file's for your device and don't worry about the multi-CSC part of the procedure) on what to do if you get stuck at the "Get PIT mapping" section.
i tried in xp mode too. no luck.
then i tried with odin 1.85 instead of 3.07. Now it doesnt show Get PIT Mapping. It shows 're-partition failed'. I guess thats some progress
But its still a no go for phone. Any idea how to fix it?
I was thinking of flashing the CWM recovery again and try to go to recovery mode. Should i or is it too risky?
I'm also gonna try flashing with the recovery firmware i found on the forum today...
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
smwoodward said:
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
Click to expand...
Click to collapse
Here's a little more info that might help. I tried booting the device without holding the buttons just a second ago, and this is what is on the screen.
Image size too large! W:1080, H:1920
display image fail
Secure Fail: Kernel
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
smwoodward said:
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
Click to expand...
Click to collapse
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
jaredb03 said:
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
Click to expand...
Click to collapse
I haven't found anything. is there seriously no stock rom for this phone?
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
jaredb03 said:
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
Click to expand...
Click to collapse
I can get it into download mode. How do you get it into recovery?
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
chapelfreak said:
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
Click to expand...
Click to collapse
I have 2 megas in my shop right now that the same thing happened to them. Now they cannot be restored through ODIN and Kies says that the model/SN is incorrect.
I got the same problem as well tired to root it didn't work then tired to flash stock rom and I.got display image.to large can some give me right file for rogers Canada cell please and.what.do I need.checked.off in odin
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
can u give another link for those files, plz ? cannot download them from those links.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
Click to expand...
Click to collapse
nicelys said:
can u give another link for those files, plz ? cannot download them from those links.
Click to expand...
Click to collapse
The links work good at my end, but i have the i527m (canadian version) and i cannot use the files, but all the links work.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Click to expand...
Click to collapse
This worked great for me, I had to leave off the PIT file though. :good:
I've been trying to upgrade to the official pie update from DRL5. I only have a mac and have been able to successfully connect with JODIN3 but cant get passed the part where it looks for a PIT file. any help?
elijahah said:
I've been trying to upgrade to the official pie update from DRL5. I only have a mac and have been able to successfully connect with JODIN3 but cant get passed the part where it looks for a PIT file. any help?
Click to expand...
Click to collapse
Possibly it hangs for a bit before flashing. It does it on windows before it starts flashing. You only use BL, AP, CP, CSC. not home csc or userdata. If you make it past there after it reboots it will also look like update gets stuck at 32%. Let it sit and it will finish. Sorry I never used a Mac with Odin before.
bryanpen said:
Possibly it hangs for a bit before flashing. It does it on windows before it starts flashing. You only use BL, AP, CP, CSC. not home csc or userdata. If you make it past there after it reboots it will also look like update gets stuck at 32%. Let it sit and it will finish. Sorry I never used a Mac with Odin before.
Click to expand...
Click to collapse
Thanks for the suggestion. unfortunately i cant even get that far. when i try to start it asks for a pit file or attempts to download it. thats where im failing. not sure what to do.
elijahah said:
Thanks for the suggestion. unfortunately i cant even get that far. when i try to start it asks for a pit file or attempts to download it. thats where im failing. not sure what to do.
Click to expand...
Click to collapse
I know even on Windows some versions of Odin acts funny. I have like 4 different versions of Odin and it seems like the one that worked before doesn't work a second time. Maybe if you can find another version and give it a try. Hopefully this may help