Since I couldn't use my account to make any reply on "flyer Development".... Have to put this here seaking for help
My device: flyer p510e 3G
Rom: dexter jb cm10 1.7---------------with full 3G function
kernel: LeeDroid HC v 2.1.0 (I don't know how to flash a .tar kernel @@ help!!!!)
Problem report: when making phone calls, people can't hear me, but I can hear them and also my voice using that stock HTC ear phone(not a bluetooth headset).....
Qusetions: Dose 1.7 version only support bluetooth headset? OR Is that problem result from the incorrect kernel? How can I flash that .tar kernel??
Tried odin for sumsung but failed....
Anybody who knows how to flash this .tar kernel ??
Sent from my HTC Desire using xda premium
ssc505684708 said:
Anybody who knows how to flash this .tar kernel ??
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
on dexterJB ver.1.7 p1 u don't need to flash the kernel, the kernel is already on it...
but if u wanna try, to flash .tar kernel u can use android debugging (adb), by run command prompt adb from ur pc and connect ur device via usb...and then flash that kernel...
So ... jb1.7 intrinsic kernel is leedroid ?? Hard to understand ...
I have adb , but I'm merely a newbie on that, could you share your command with me ? I'd like to try that on . Thanks !
Sent from my HTC Desire using xda premium
sdpinsens said:
on dexterJB ver.1.7 p1 u don't need to flash the kernel, the kernel is already on it...
but if u wanna try, to flash .tar kernel u can use android debugging (adb), by run command prompt adb from ur pc and connect ur device via usb...and then flash that kernel...
Click to expand...
Click to collapse
So ... jb1.7 intrinsic kernel is leedroid ?? Hard to understand ...
I have adb , but I'm merely a newbie on that, could you share your command with me ? I'd like to try that on . Thanks !
Sent from my HTC Desire using xda premium
Sent from my HTC Desire using xda premium
sdpinsens said:
on dexterJB ver.1.7 p1 u don't need to flash the kernel, the kernel is already on it...
but if u wanna try, to flash .tar kernel u can use android debugging (adb), by run command prompt adb from ur pc and connect ur device via usb...and then flash that kernel...
Click to expand...
Click to collapse
tried :fastboot flash boot Dexters -jbxxxxxxx.tar doesn't work ... data length is too long
don't know how to creat a kernel of img format ... help
Sent from my HTC Desire using xda premium
ssc505684708 said:
tried :fastboot flash boot Dexters -jbxxxxxxx.tar doesn't work ... data length is too long
don't know how to creat a kernel of img format ... help
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
do u mean the kernel source DexterJB-kernel.tar.gz, right? that file is the source of the kernel...it's too complicated to create image files, it takes an understanding of the linux program, only expert developer who can do that. u should know that the stock kernel that include on dexterJB Rom come from leedroid -HC kernel, Dexter has successfully changed the leedroid kernel (read this: http://forum.xda-developers.com/showthread.php?t=1795342&page=5) ...
ur kernel is shown [email protected] #136, right?...
there is no new jellybean kernel that can run on Flyer right now, except ones....thanks to Leedroid, Chaos_x and Dexter...
about phone calls problem, try to reinstall the ROM...use the latest...DexterJB17 p1....
sdpinsens said:
do u mean the kernel source DexterJB-kernel.tar.gz, right? that file is the source of the kernel...it's too complicated to create image files, it takes an understanding of the linux program, only expert developer who can do that. u should know that the stock kernel that include on dexterJB Rom come from leedroid -HC kernel, Dexter has successfully changed the leedroid kernel (read this: http://forum.xda-developers.com/showthread.php?t=1795342&page=5) ...
ur kernel is shown [email protected] #136, right?...
there is no new jellybean kernel that can run on Flyer right now, except ones....thanks to Leedroid, Chaos_x and Dexter...
about phone calls problem, try to reinstall the ROM...use the latest...DexterJB17 p1....
Click to expand...
Click to collapse
Thanks for your reply, I did mean the kernel source And understand the whole thing now. Reflashing the rom immediately...
Sent from my HTC Desire using xda premium
Help needed
Hi. First of all I’m a noob in all concerns of android - rooting - ROMs and so on. Basically I wanted to root my HTC flyer WIFI so I could try using different custom roms, desensed honeycomb, jelly bean and so on.
It all started out pretty well, at least I got it rooted with this guide:
http://forum.xda-developers.com/showthread.php?t=1881748 root was confirmed with root checker basic.
My next step was that I wanted to try flash a custom ROM on it and I decided to try out DextersJB v1.7p1 CM10 + AOKP edition (http://forum.xda-developers.com/showthread.php?t=1795342)
Since I used HTC Unlock it says I should:
“if you used HTC Unlock and S-OFF'd using that, you ALWAYS need to flash new boot.img manually, search "fastboot flash boot boot.img" if do not already know how to use it.
remember that 2 boot images exists, one withhtc keys enabled(phoneUI) and one without.”
So I found this tutorial for flashing via fastboot:
http://forum.xda-developers.com/showthread.php?t=1752270
It basically works, but after I fastboot flash boot boot.img and fastboot reboot, first thing that comes up is the HTC(without “quietly brilliant”) and then just a blank black screen with backlit display still on (which could be the boot animation from the JB ROM). I waited and waited, but nothing else happens. I can still reboot into bootloader and access other boot.img via fastboot.
I searched for solutions in the forums, but couldn’t find anything helpful. Can anyone help me get it up and running again and flash a boot.img?
Remember this is all I have ever done into rooting and Roms, so please try answering in a very basic "nerd" language.
Same problem here
ssc505684708 said:
Since I couldn't use my account to make any reply on "flyer Development".... Have to put this here seaking for help
My device: flyer p510e 3G
Rom: dexter jb cm10 1.7---------------with full 3G function
kernel: LeeDroid HC v 2.1.0 (I don't know how to flash a .tar kernel @@ help!!!!)
Problem report: when making phone calls, people can't hear me, but I can hear them and also my voice using that stock HTC ear phone(not a bluetooth headset).....
Qusetions: Dose 1.7 version only support bluetooth headset? OR Is that problem result from the incorrect kernel? How can I flash that .tar kernel??
Tried odin for sumsung but failed....
Click to expand...
Click to collapse
On v1.7, my flyer reboots when I turn speakerphone on or plug in a headset. So, I've gone back to v1.6, but that has microphone problems, even with p1 and p2. So, I'll just wait for v1.8. I hope they keep developing, because if it gets working fully (which is a big job for the developers) I'll make some donations to them. It's great that there's progress on the Flyer, because the development for my old Desire has halted.
I wanted to post my feedback in the development thread too, but I'm also a newbie.
jonas1988 said:
Hi. First of all I’m a noob in all concerns of android - rooting - ROMs and so on. Basically I wanted to root my HTC flyer WIFI so I could try using different custom roms, desensed honeycomb, jelly bean and so on.
It all started out pretty well, at least I got it rooted with this guide:
http://forum.xda-developers.com/showthread.php?t=1881748 root was confirmed with root checker basic.
My next step was that I wanted to try flash a custom ROM on it and I decided to try out DextersJB v1.7p1 CM10 + AOKP edition (http://forum.xda-developers.com/showthread.php?t=1795342)
Since I used HTC Unlock it says I should:
“if you used HTC Unlock and S-OFF'd using that, you ALWAYS need to flash new boot.img manually, search "fastboot flash boot boot.img" if do not already know how to use it.
remember that 2 boot images exists, one withhtc keys enabled(phoneUI) and one without.”
So I found this tutorial for flashing via fastboot:
http://forum.xda-developers.com/showthread.php?t=1752270
It basically works, but after I fastboot flash boot boot.img and fastboot reboot, first thing that comes up is the HTC(without “quietly brilliant”) and then just a blank black screen with backlit display still on (which could be the boot animation from the JB ROM). I waited and waited, but nothing else happens. I can still reboot into bootloader and access other boot.img via fastboot.
I searched for solutions in the forums, but couldn’t find anything helpful. Can anyone help me get it up and running again and flash a boot.img?
Remember this is all I have ever done into rooting and Roms, so please try answering in a very basic "nerd" language.
Click to expand...
Click to collapse
I'm basically going through the same problem...I'm stuck in a bootloop and can't even access my Recovery. Anybody knows what's up?
peterdunstan said:
On v1.7, my flyer reboots when I turn speakerphone on or plug in a headset. So, I've gone back to v1.6, but that has microphone problems, even with p1 and p2. So, I'll just wait for v1.8. I hope they keep developing, because if it gets working fully (which is a big job for the developers) I'll make some donations to them. It's great that there's progress on the Flyer, because the development for my old Desire has halted.
I wanted to post my feedback in the development thread too, but I'm also a newbie.
Click to expand...
Click to collapse
I agree with U. Dexter and his friends, their JB made flyer a really fast MACHINE. 1.7 is better in touching so I keep using it. If 1.8 fix the camera and phone, there would be no reason not flashing it( HTC developers better go to die ~~) I also want to donate to Dexter if he doesn't mind that's done with RMB...:
Sent from my HTC Desire using xda premium
ssc505684708 said:
I agree with U. Dexter and his friends, their JB made flyer a really fast MACHINE. 1.7 is better in touching so I keep using it. If 1.8 fix the camera and phone, there would be no reason not flashing it( HTC developers better go to die ~~) I also want to donate to Dexter if he doesn't mind that's done with RMB...:
Sent from my HTC Desire using xda premium
Click to expand...
Click to collapse
I just gave him a modest donation to encourage him onwards. Really looking forward to it all working. Phone call functionality first, camera later, if possible.
can't wait
Can't wait for a new version!!!
peterdunstan said:
Can't wait for a new version!!!
Click to expand...
Click to collapse
Battery life was awesome on it. Now I'm using a One X rom, also Dexter's work, but it goes flat before the day is finished even using Juice Defender. It's almost a month since the last update. Fingers crossed my reboot issue when making calls will be fixed soon!
Unable to boot after flashing
I am having same issue reported above by "daoster". I was able to go to the CWM Recovery once again and went thru the ZIP install process for the 2nd time. Still the Flyer will not boot.
solved
parambil said:
I am having same issue reported above by "daoster". I was able to go to the CWM Recovery once again and went thru the ZIP install process for the 2nd time. Still the Flyer will not boot.
Click to expand...
Click to collapse
Finally I solved myself. Hope this will help someone.
1. Connect the HTC Flyer to computer & get in the fastboot.
2. C:\Android>fastboot devices
HT15GJN00238 fastboot
3. Copy the boot.img from the Dexter ZIP file. Then run the following
C:\Android>fastboot flash boot boot.img
sending 'boot' (3212 KB)...
OKAY [ 0.523s]
writing 'boot'...
OKAY [ 0.388s]
finished. total time: 0.913s
4. Copy the recovery.img from CWM ZIP file and run the following. And Reboot.
C:\Android>fastboot flash recovery recovery.img
sending 'recovery' (5158 KB)...
OKAY [ 0.843s]
writing 'recovery'...
OKAY [ 0.990s]
finished. total time: 1.835s
rebooting...
finished. total time: 0.593s
5. Now I was be able to go to the Recovery mode and install the Dexter ZIP file.
I thought I bricked my Flyer,but I am back online
Related
I did my research on how to install ROMS with a locked S On and Kernels, but just got even more confused about the process. I am coming from an Evo 4g CDMA.
I have H BOOT 1.5 unlocked S ON. My back up was lost. I tried to flash something like the newest MIUI using TWRP 1.1. w/e. I can't get past the boot screen for MIUI. As I was reading up on the forums, it seemed to me that you had to use a program called Flash Image GUI to get a kernel going on a ROM. Though, here is where I was confused. If a ROM has a kernel in it and I flash the ROM, does the Kernel part of that flash not get set up as well?
Would I need to flash the rom like normal from the SD Card then use something separate to flash a Kernel? If so, I am kinda boned. I can't get into the phone, just the recovery and can't get that program installed on the phone Trying to flash up Xplode now to see if maybe I just got a bad download.
If these questions were answered, please forgive me, I did try to find the answers, but as I read up more and more, it was getting to be more and more confusing to my personal issue at hand.
Thanks for the help!!
If you grab the kernel from your Miui zip, it's in the zips root called boot.img
Put that into your folder with your fastboot exe
Boot into bootloader the same as when you flashed the CWM
Use fastboot command... fastboot flash boot boot.img
this will flash the kernel and you should be able to boot up properly
Oh, well that is the problem. I had someone else flash TWRP for me. Guess I need to find out more on how to flash up that to get the kernel going. This S On thing is a massive PITA, lol. Guess once I get the phone up and going and I can use that program, things will be way easier
Nametaken said:
Oh, well that is the problem. I had someone else flash TWRP for me. Guess I need to find out more on how to flash up that to get the kernel going. This S On thing is a massive PITA, lol. Guess once I get the phone up and going and I can use that program, things will be way easier
Click to expand...
Click to collapse
I see. i skipped the how to part since i thought you had alrady flashed the CMW your self, it's fairly easy.
you need..
1) to install the evo 3d usb drivers.. filename HTCDriver3.0.0.007.exe .sorry i don't have a link, i got them off these forums somewhere
2) you need the fastboot.exe , again search google/these forums
then shut down your phone
pull battery out, then back in
hold down volume- (minus) and then hold the power button as well, only let go once in the bootloader, choose the fastboot option then insert usb cable to phone->pc .. you should see fastboot-usb message come up on your phone
then you can type out that fastboot command in the previous post from a dos command prompt, from the directory with your fastboot exe and boot.img
It's easier to put rom you want on the SD card make sure debug is on.
Adb reboot bootloader . Now
Fastboot boot recovery.img now wipe and flash rom you are good to go man. Works flawless .
Sent from the Reaper.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Sorry about posting in the wrong area.
What I did, which can help out other 3D noobs is this:
Since I just unlocked and have no back up, my kernel was still stock
Downloading a stock rom and moving it to my phone via comp, twrp recovery mode>> USB Toggle allows you to connect to PC! Put the rom on the main part of the SD card and just flash like normal.
Here you should be able to boot up like normal again.
Let me say, Flash Image GUI is a noobs friend till you can learn to use adb more.
I was told you can put a Rom on your card and just flash allowing the kernel to flash as well. I have not had success with this with HBoot 1.5 S On.
Flash Image GUI:
Download the rom you want, Aosp to Sense is fine.
Open Flash GUI and choose the Browse option.
Locate your rom on your card and choose it.
The app will give you a message saying the rom is big yada yada, say yes.
Wait a few moments as it finds the kernel. Once it does, choose flash Image.
Choose reboot recovery and flash the exact rom you picked with the App. Reboot and win.
This is just what I, a noob, have found to work.
I have NOT been able to just flash any rom on the SD Card and have it work. Flash Image UI has NOT been able to get Virus' Rom to load
A's I find more noob friendly tips I can report.
Thanks everyone else for the input! I won't lie, I came from an Evo 4g and am totally lazy as I am used to S Off and just flashing away. S On, I hate you. ADB, I fear you. Flash Image GUI, I want to marry you!
CDMA 3D, I wish we had more AOSP lol
Hope this helps out some people.
Sent from my PG86100 using XDA
Nametaken said:
Sorry about posting in the wrong area.
What I did, which can help out other 3D noobs is this:
Since I just unlocked and have no back up, my kernel was still stock
Downloading a stock rom and moving it to my phone via comp, twrp recovery mode>> USB Toggle allows you to connect to PC! Put the rom on the main part of the SD card and just flash like normal.
Here you should be able to boot up like normal again.
Let me say, Flash Image GUI is a noobs friend till you can learn to use adb more.
I was told you can put a Rom on your card and just flash allowing the kernel to flash as well. I have not had success with this with HBoot 1.5 S On.
Flash Image GUI:
Download the rom you want, Aosp to Sense is fine.
Open Flash GUI and choose the Browse option.
Locate your rom on your card and choose it.
The app will give you a message saying the rom is big yada yada, say yes.
Wait a few moments as it finds the kernel. Once it does, choose flash Image.
Choose reboot recovery and flash the exact rom you picked with the App. Reboot and win.
This is just what I, a noob, have found to work.
I have NOT been able to just flash any rom on the SD Card and have it work. Flash Image UI has NOT been able to get Virus' Rom to load
A's I find more noob friendly tips I can report.
Thanks everyone else for the input! I won't lie, I came from an Evo 4g and am totally lazy as I am used to S Off and just flashing away. S On, I hate you. ADB, I fear you. Flash Image GUI, I want to marry you!
CDMA 3D, I wish we had more AOSP lol
Hope this helps out some people.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
ADB is pretty simple to flash with lol
All you do is keep a copy of the recovery.img you are using in your adb folder...
You hold shift down right click on the folder that adb is in platform tools folder is where it's at say open cmd prompt to it. That is the fast painless method
Make sure you have a rom on your sd card.... Also that debug is turned on...
Plug phone in hook to computer...
ADB:
adb reboot bootloader
now:
fastboot boot recovery.img takes you into recovery...
Now wipe don't wipe SD card...
Flash rom your set works on virus roms and any other rom 0 issues
Also Flash GUI works for everyone nothing wrong with it....
I just prefer Good Old Adb to do my work If you need any help feel free to ask man.. I'll do what I can to help ya out if you get stuck..
reaper24 said:
ADB is pretty simple to flash with lol
All you do is keep a copy of the recovery.img you are using in your adb folder...
You hold shift down right click on the folder that adb is in platform tools folder is where it's at say open cmd prompt to it. That is the fast painless method
Make sure you have a rom on your sd card.... Also that debug is turned on...
Plug phone in hook to computer...
ADB:
adb reboot bootloader
now:
fastboot boot recovery.img takes you into recovery...
Now wipe don't wipe SD card...
Flash rom your set works on virus roms and any other rom 0 issues
Also Flash GUI works for everyone nothing wrong with it....
I just prefer Good Old Adb to do my work If you need any help feel free to ask man.. I'll do what I can to help ya out if you get stuck..
Click to expand...
Click to collapse
You can not flash some ROMS through ADB/Fastboot with s-on, it just doesn't work no matter which way you go about it. Flashing a recovery is easy but that was not the OP's problem. The "noob" way that the OP suggested is the only way to get roms with custom boot.img in the zip to stick. I just installed CM9 and ADB/fastboot was of no use. Getting into recovery is easy but will not provide results unless you have used FlashImageGUI.apk first on a working ROM.
Nether CWM nor TWRP work to flash such ROM's with the right boot.img. You must use FlashImageGUI.apk!
StevetotheH said:
You can not flash some ROMS through ADB/Fastboot with s-on, it just doesn't work no matter which way you go about it. Flashing a recovery is easy but that was not the OP's problem. The "noob" way that the OP suggested is the only way to get roms with custom boot.img in the zip to stick. I just installed CM9 and ADB/fastboot was of no use. Getting into recovery is easy but will not provide results unless you have used FlashImageGUI.apk first on a working ROM.
Nether CWM nor TWRP work to flash such ROM's with the right boot.img. You must use FlashImageGUI.apk!
Click to expand...
Click to collapse
I never had any issues using cwm the older version 4.0 to flash any rom the fastboot method Anyway's older TWRP and Newest CWM had some issues with not wiping right to flashing funky...
I will help the OP out if he ever gets stuck
Yeah reaper your right! I think I came off like a ****, I am one, but didn't mean to come off sounding snide.
Sent from my HTC Evo 3D using XDA
StevetotheH said:
Yeah reaper your right! I think I came off like a ****, I am one, but didn't mean to come off sounding snide.
Sent from my HTC Evo 3D using XDA
Click to expand...
Click to collapse
It's all good man no worries Your cool
Sent from my PG86100 using xda premium
Dah da dat ta ta! (Swoops in with my 2 cents)
See the Guide/Flashing Notes in my signature for a walkthru for flashing roms, recoveries, etc. All up to date. Choose your method: fastboot & recovery or flashimage & recovery.
Note: TWRP 2.0 with Dumlock is a workaround to avoid using fastboot (pc). FlashImage is not a requirement, its also a workaround vs fastboot.
mpgrimm2 said:
Dah da dat ta ta! (Swoops in with my 2 cents)
See the Guide/Flashing Notes in my signature for a walkthru for flashing roms, recoveries, etc. All up to date. Choose your method: fastboot & recovery or flashimage & recovery.
Note: TWRP 2.0 with Dumlock is a workaround to avoid using fastboot (pc). FlashImage is not a requirement, its also a workaround vs fastboot.
Click to expand...
Click to collapse
Nice I was wondering when you was gonna pop in . LOL
Sent from my PG86100 using xda premium
Thanks erryone. I hope others were able to get some help here that are new to 3vo and flashing. I am so waiting for a nub proof s-off method.
Sent from my PG86100 using XDA
There is the HBOOT downgrade. I have ZERO linux experience whatsoever and thought the process was very easy. I know it says to 'brick' the phone, but it is honestly not that scary. I have done two of these already both being successful on the first attempt. The live cd by closeone actually takes care of almost everything, except for actually doing the brick. Trust me being on 1.40 s-off is much much nicer.
How am I meant to install a kernel?
Sent from my HTC Explorer A310e using XDA
if its a flashable zip, flash it from recovery.
if its a boot.img, fastboot it from bootloader
you can find softwares to do it too
Sent from my Nexus One using Tapatalk
with CWM or with fastboot app at PC (hh at fastboot mode) ..
"Install from ZIP" option (i.e. flash) using CWM.
n1newbie said:
if its a flashable zip, flash it from recovery.
if its a boot.img, fastboot it from bootloader
you can find softwares to do it too
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
Are kernels very difficult to find? I've searched a lot for kernel 2.6.38.8 and I just can't find the kernel in zip format after looking at a series of error 404 thinking that this kernel is out of date.
Sent from my HTC Explorer A310e using XDA
After flashing the success kernel my phone won't boot? I'm on 10/2.
You haven't specified which is your phone model, as some device's bootloader is locked and some not.
Installing kernel in Samsung devices (Unlocked bootloader) is pretty easy, you just have to flash the zip from CWM recovery. Or if you have got a boot.img make a flashable zip (There are many tutorials over here for that) and flash it.
Another option is, replace the boot.img of your Custom ROM zip file and flash.
ri123 said:
Are kernels very difficult to find? I've searched a lot for kernel 2.6.38.8 and I just can't find the kernel in zip format after looking at a series of error 404 thinking that this kernel is out of date.
Sent from my HTC Explorer A310e using XDA
Click to expand...
Click to collapse
You cant just flash any old kernel. It has to be for your device.
Sent from my GT-I9000 using xda premium
Oh my.. I think you should go into the forum for your device.. go to the q&a section and read.. then read more and when your all done reading... read again! Because I'm thinking if you don't your going to end up with a paperweight.
Sent from my PARANOID SGH-I747m using xda premium
Jason123420 said:
Oh my.. I think you should go into the forum for your device.. go to the q&a section and read.. then read more and when your all done reading... read again! Because I'm thinking if you don't your going to end up with a paperweight.
Click to expand...
Click to collapse
This is the correct answer to every question asked in here so far!!!!
There is no "generic Android way" to do what you're asking for. It can change for every single phone. And if you flash the wrong thing, you may permanently destroy your phone! And if your phone has different variants, be sure to get the version specifically for your exact phone! For example, flashing something for the wrong Galaxy S3 can kill your device in an unrecoverable way because where the kernel goes for one variant is where the bootloader goes for another variant!
If you don't know exactly what you're doing, then don't do it and go learn more! Experiment first ONLY with step-by-step tutorials for your EXACT scenario! If something's different, don't do it!
yeah read into this a good bit more before you do this. look in your phones forums for a guide. you mess this up you phone becomes pretty useless.
I'm a little worried now, and a bit rushed this morning as I have a funeral to attend this morning.
Bottom line, my phone has a blank screen now. It gets past the boot animation, but goes blank after that. I cannot get into recovery or boot loader by pressing the power/vol down buttons. I have done a couple battery pulls, but of no help. When I connect it to my PC, it does not show up as a disk drive, though it did say installing drivers.
Google flashable kernals and put in android sdk folder then go to cmd andtype fastboot flash name of kernal.img. I 90% sure.
Remember to click thanks if I helped
Sent from my AT&T HTC One X using XDA-forum app.
Best is to "Use ADB" !
Press Thanks On Getting Helped
This is the kernel I need for the rom I downloaded,
Team-Hydra / android_kernel_htc_msm8660. It is for the new rom CyanogenMod 10.1 - Android 4.2.1 - Jellybean.
So what is being said is that I need to put this on my sd card in the android sdk folder, the flash it through the command prompt. Is this correct so far?
Kamau54 said:
This is the kernel I need for the rom I downloaded,
Team-Hydra / android_kernel_htc_msm8660. It is for the new rom CyanogenMod 10.1 - Android 4.2.1 - Jellybean.
So what is being said is that I need to put this on my sd card in the android sdk folder, the flash it through the command prompt. Is this correct so far?
Click to expand...
Click to collapse
You need to flash via fastboot like u said Android SDK Folder. Just need to flash the boot.img follow what ROM u flash.
Extract the Boot.img from the ROM.zip u flashed.
Put the Boot.img at SDK folder which is same with fastboot locate.
Boot ur phone to BOOTLOADER -> Fastboot, then using command promp fasboot flash boot boot.img, then reboot your phone..
Here is where I'm at with this.
After letting my phone sit all night without the battery in it, I still have the same problem. After the boot animation, the screen is black. I tried to connect the phone to the pc, but my computer does not see it. I also tried to use a card reader, but still my computer does not see the card either. The reader is working because I put another sd card in it and it saw it.
The thing is now, I can get into the bootloader and recovery, though I now seem to have Clockwork instead of 4ext, which is what I had before I started having problems. Clockwork sees the card as well.
I don't know how to get anything on the card now since I cannot connect to the pc, either through the phone or through a card reader.
Anyone have any ideas?
Kamau54 said:
Anyone have any ideas?
Click to expand...
Click to collapse
What phone do you have?
Sent from my GT-I9000 using xda premium
NIMBAH said:
What phone do you have?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I have the HTC EVO V 3D. It's rooted and S-off.
Last night I was able to unlock my bootloader on my rezound. And I installed Amon Ra recovery. I did a nand backup before I made any other choices from there. But I don't know if I was perm rooted. But I installed su and busybox. well I went ahead and installed Rom Manager just to start out with instead of using amon recovery.
Through rom manager I had to flash clockwork mod. did that. so I thought i was ready to go with flashing a ROM. well I downloaded a ROM through my phone. but it wasn't on my sd card. so i pulled the notifications down on my phone and just clicked the downloaded ROM and it said what would you like to do with it? I clicked the rom manager option. cleared dalvik and cache n all. Everything said installed successfully. well it just stayed on the htc screen FOREVER. so i pulled battery and tried to recover my backup. well now that i have clockwork as recovery. my backup isn't on my phone. I can't even use clockwork now. I can't get my phone to boot at all. I don't think my phone is bricked cuz I can get into the bootloader menu. But i can't get my phone to boot back up at all whatsoever
So I was either not rooted like I thought I was or something. I can't even factory reset through bootloader. it just takes me back to clockwork mod and everytime i click an option through cwm it goes blank. every single option. I need my amon recovery back somehow so i can restore my backup....please somebody help me out. I hope its not bricked. Thanks
You need to flash the boot.img from fast boot if you're not s-off
Sent from my ADR6425LVW using Tapatalk 2
and how am i able to do so??? I guess I'm still a noob with some things. just need a good step by step way of how lol
Edit: Ok I opened up a command prompt and typed in fastboot boot.img. then a whole bunch of stuff popped up. what do i do from there?
npainter7 said:
and how am i able to do so??? I guess I'm still a noob with some things. just need a good step by step way of how lol
Edit: Ok I opened up a command prompt and typed in fastboot boot.img. then a whole bunch of stuff popped up. what do i do from there?
Click to expand...
Click to collapse
extract boot.img from your downloaded ROM. place it in folder on your PC where you have fastboot.
put the phone in fastboot mode and connect to PC , it shows fastboot usb.
issue below in command prompt
fastboot flash boot boot.img
kancherlapraneeth said:
extract boot.img from your downloaded ROM. place it in folder on your PC where you have fastboot.
put the phone in fastboot mode and connect to PC , it shows fastboot usb.
issue below in command prompt
fastboot flash boot boot.img
Click to expand...
Click to collapse
Ok i did this. and this is what popped up.
c:\Android>fastboot flash boot boot.img
sending 'boot' (3950 KB)...
OKAY [ 0.905s]
writing 'boot'...
OKAY [ 1.174s]
finished. total time: 2.082s
Now what???
Edit: Nevermind I got it to work now thank you SO MUCH you guys. much appreciated
@@#$$%#$% Freaking hell I am getting so frustrated with my phone!!! I am going through a continuous bootloop. I can't do anything in time on my phone before it bootloops again over and over. I installed one of newts one xxx ROMS and the continuous bootloop will not stop. I tried installing a different RUU and tried flashing using command prompt and nothing happened....I am so frustrated and have been trying to figure out this rooting stuff over 4 days now straight....I could really use some help!!!
npainter7 said:
@@#$$%#$% Freaking hell I am getting so frustrated with my phone!!! I am going through a continuous bootloop. I can't do anything in time on my phone before it bootloops again over and over. I installed one of newts one xxx ROMS and the continuous bootloop will not stop. I tried installing a different RUU and tried flashing using command prompt and nothing happened....I am so frustrated and have been trying to figure out this rooting stuff over 4 days now straight....I could really use some help!!!
Click to expand...
Click to collapse
Your firmware is probably still GB, Newt's is for ICS. There is a patch allows you to use his ROM on a GB firmware base. So, over on MikMIk possibly, is this patch you need. Flash it in recovery, just like you would a ROM.
Here found a helpful link, look at PRDOG's post. He rocks... Depending on which release of Newt's ROM you are on, he also has a RLS 3.2.1 which is also a patch. Sorry it is a little confusing. But stick with it. Lots of people to help you. You don't need to flash the 3.2.1 patch, just the GB one.
http://themikmik.com/showthread.php?13767-rls-3-2-1/page2
paulhoop said:
Your firmware is probably still GB, Newt's is for ICS. There is a patch allows you to use his ROM on a GB firmware base. So, over on MikMIk possibly, is this patch you need. Flash it in recovery, just like you would a ROM.
Here found a helpful link, look at PRDOG's post. He rocks... Depending on which release of Newt's ROM you are on, he also has a RLS 3.2.1 which is also a patch. Sorry it is a little confusing. But stick with it. Lots of people to help you. You don't need to flash the 3.2.1 patch, just the GB one.
http://themikmik.com/showthread.php?13767-rls-3-2-1/page2
Click to expand...
Click to collapse
Hey thank you so much!! It's nice to have people help out....so when I flash the GB one, I don't have to relock my bootloader do I? I hope not lol
Sent from my ADR6425LVW using xda app-developers app
So in order to flash a PH98IMG.zip what do I have to do? do i have to go into the command prompt and go from there?
i 've got an amaze 4g t-mobile recently.it works perfectly.but then,i updated to ICS through OTA...
Everything work fine except Wifi,i cant turn on wifi at all.It only show error when i try to turning on ...
I did search the whole forums,trying everthing i can do..unlock boot loader/rooted/s-off/flash 4EXT recovery/flash many cook rom (android revolution,fastrom,energy rom..),kernel(ruby-faux123 v007/v008/v015/v016..)
finally i reverted back to Stock GB with "PH85IMG_Ruby_TMOUS_1.43.531.3_Radio_1.08.550L.19DC_30.66.550L.08D_release_228638_signed".
but wifi still shows ''error'' at all,when i try to turning on hotspot ,the phone force to reset .
currently:
Stock GB:2.3.4
Sense:3.0
Kernel:2.3.35.13 build 144#1
Baseband:1.08.550L.19DC_30.66.550L.08D
Buildnumber:1.43.531.3
Bootloader unlocked and s-off.
Hoping there is anyone else can understand my bad english and help me .
Since you're s-off try updating back to ics via the most recent file in the stock ruu thread and see if it resolves it.
sent from a smooth place where my fingers trace across the screen to see your face and make you scream!
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
ronaldinho_07 said:
thanks sir
i try to flashing this kernel into my stock GB:Amaze-EKF-009b-sense.zip
hope it works
Click to expand...
Click to collapse
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Dark Nightmare said:
Kernel won't change much, but the wifi drivers being present in the kernel just might help, let me know your results.
Click to expand...
Click to collapse
as you have said,i just flashed the above kernel (Amaze-EKF-009b-sense.zip) into stock GB,but wifi error is still there
after that,i updated to ICS via RUU and flashed this kernel from here : http://forum.xda-developers.com/showthread.php?t=1362759 (at #5)
Nothing changes.
at the first time,i have flashed the Amaze ICS(v015) kernel via 4EXT touch recovery,flashed kernel successfully .
(http://forum.xda-developers.com/showthread.php?t=1359951)
but i think i go wrong somewhere,because the following instruction said:
CWM Flash Instructions: (NO LONGER SUPPORTING CWM METHOD DUE TO HTC's STUPID S-ON UNLOCK!!!)
1. Copy file to SDcard
2. Reboot to CWM recovery
3. Flash the Zip file (if you noticed an error, Flash the same file the 2nd time)
4. Reboot, Done!
i read carefully the second way
Easy Kernel Flasher Instructions:
1. download the above file (via phone directly or to a PC)
2. unzip to a folder then depends on PC or Linux
[ Windows ] open command prompt window and type Flash.bat
[ Linux ] open terminal window and type ./Flash.sh (make sure permission is set to 755 for the Flash.sh)
3. Let the script complete!
,downloaded the kernel,extracted into a folder on my pc.
but i dont see any "Flash.bat'' and dont know how to flash it.
but in the folder that i've just extracted.i found two file:
wl12xx.ko and wl12xx_sdio.ko
putting the whole folder modules into the this kernel (http://forum.xda-developers.com/showthread.php?t=1362759) and run flash.bat...
after flashing,both wifi and bluetooth broken
when i try to turning them on,they turn off instantly
//sorry sir for the bad english
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Keylogger_0 said:
Try to run my AIO tool, which can be found here: http://forum.xda-developers.com/showthread.php?t=1762936
If that doesn't work, more likely than not, it's a hardware issue, as my AIO tool will install a MOSTLY stock RUU with a stock kernel. If that doesn't work, I strongly doubt anything else would work either.
Make sure you follow the directions for the tool.
Click to expand...
Click to collapse
thanks sir,i'll try
btw,i try to flashing faux123-kernel via CWM recovery,but i's aborted
then,i force to flash faux123-kernel via 4EXT touch recovery and succeed
but i still cant turn on wifi,it just says error
can anyone give me an advise,pls
That memory block is probably damaged.
sent from a galaxy you'll never see.
do you think it's related to wifi hardware issues
ronaldinho_07 said:
do you think it's related to wifi hardware issues
Click to expand...
Click to collapse
It could be that as well, did you call tmo and tell em about it?
Dark Nightmare said:
It could be that as well, did you call tmo and tell em about it?
Click to expand...
Click to collapse
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
ronaldinho_07 said:
i cant do that because i live in vietnam sir
btw,when i was in a custom rom with fraux's kernel.it would just stay in dim grey and say "turning wifi on" and freeze there for a while,then saying "Error''
but,when i tried to copying "wlan12xx.ko,wlan12xx_sdio.ko" from Fraux kernel to Amaze stock kernel modules folder.Flashed it.
then,i turned it on and the wifi turned off itself instantly without saying error
there was wifi error same here :
http://forum.xda-developers.com/showthread.php?t=1796358
thanks for your helps sir :good:
Click to expand...
Click to collapse
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
ronaldinho_07 said:
yes.i did sir
now,i try to reverting to stock GB 2.3.4 again
i've call to a store near my house,they said that if amaze's wifi chip were as same as hd2's wifi chip,the cost would be about $35
Click to expand...
Click to collapse
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
thanks so much
nice day sir,and i have to go to bed ,it's 3h40 AM in vietnam
//updated.
after flashing many times,problem solved
Necro'd.
Dark Nightmare said:
Hmmm...doubt it's the same but ill Google the hardware to see if it's replaceable.
Click to expand...
Click to collapse
Anyone have any info as to how or where to repair the wifi chip on the amaze? I'm having the same problem and am quite certain that is it hardware issue as the problem started after dropping the phone and without flashing or changing anything, fixing permissions and flashing stock RUU's, kernels, etc of no help. Hoping that something is possible, would be great if it was as simple as a loose ribbon cable...
Dark Nightmare said:
Did you try the fix permissions someone mentioned?
sent from a galaxy you'll never see.
Click to expand...
Click to collapse
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
spencerjang said:
Hello,
Here is my situation. I got S-off, SuperCID, unlocked on my HTC amaze unbranded version. Then got ICS stock RUU to run.
The wifi, bluetooth worked fine. However, I have to compile the kernel for this exact version (matched radio, baseband kernel, etc). I downloaded the source from HTCdev (the one with TI WLAN sources), and compiled it. Then I got the zImage repacked so that it can run on the device. Then I see that the wifi, bluetooth shows "error".
The kernel build "readme.txt" located me to the kernel object files such as wl12xx.ko. So I planned to push them in to the device with command "adb push wl12xx.ko /system/lib/modules" but failed. I got super user permission ("adb shell", "su") but still cannot get the kernel objects to the device with adb command. Is there a way to handle this?
My final objective is to get the compiled kernel (with no wifi, bluetooth error) running.
PS. Doesn't actually matter if it is GB or ICS.
Thank you in advance.
Click to expand...
Click to collapse
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
ravike14 said:
It's easier if you swap the neccesary files with faux kernel zip and flash it from recovery or make your own flashable zip.. That way the modules and zimage get flashed without having to use adb
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
spencerjang said:
Oh, I downloaded faux's kernel I believe version 31 (from a dropbox someone linked). and failed to flash from sd card! Any suggestions?
Click to expand...
Click to collapse
Why it failed? The error?
Sent from my HTC_Amaze_4G using XDA Premium 4 mobile app
I have really tried, spent 4 hours searching the web but my phine has been stuck at the htc logo upon booting, I can acess the bootloader and CWM and have the recovery etc. but cant figured out how to "unbrick" my phone, HELP! please!
htatw said:
I have really tried, spent 4 hours searching the web but my phine has been stuck at the htc logo upon booting, I can acess the bootloader and CWM and have the recovery etc. but cant figured out how to "unbrick" my phone, HELP! please!
Click to expand...
Click to collapse
Hey I´m at the same Problem. Can you connect your Phone to your PC?
Then search for a RUU for your Device... and run it... I have the hope that this works at mine htc but the battery is lower then 30% and i have no idea why it doesnt charge... maybe yours is over that...
muhhh351 said:
Hey I´m at the same Problem. Can you connect your Phone to your PC?
Then search for a RUU for your Device... and run it... I have the hope that this works at mine htc but the battery is lower then 30% and i have no idea why it doesnt charge... maybe yours is over that...
Click to expand...
Click to collapse
I plugged it in and yes, it charged! but I am gonna try the RUU now, ill tell you the results, really never encountered this before ;(
May I ask why you want to relock your bootloader?
If your phone is not charging, it's probably because your Recovery is not the latest to date.
@muhhh351
You should flash a Recovery known working on charging mode, the first releases were lacking this mode, but this is resolved now. Click on Frequently Asked Questions in my signature everything is there for you to find about HOX+ and their recoveries.
Lucky Thirteen said:
May I ask why you want to relock your bootloader?
If your phone is not charging, it's probably because your Recovery is not the latest to date.
@muhhh351
You should flash a Recovery known working on charging mode, the first releases were lacking this mode, but this is resolved now. Click on Frequently Asked Questions in my signature everything is there for you to find about HOX+ and their recoveries.
Click to expand...
Click to collapse
hey, I already have CWM, is that enough? I also have the respective RUU,
htatw said:
hey, I already have CWM, is that enough? I also have the respective RUU,
Click to expand...
Click to collapse
TWRP is more complete and a rigourously tested recovery. CWM was modded to work on the HOX+.
First make sure your SDK tool (adb) is correctly installed and also the HTC's drivers. (There is a link for a tutorial in my signature.)
Download the correspondent recovery for your phone International OR AT&T/Telus (N.B. Links are available in the Sticky FAQ)
Flash the Recovery.
Clear Cache
Reboot in Recovery
Install your correspondent version of any ROM.zip you want that is already on your storage. (Otherwise,Sideload a ROM to be able to flash one inRecovery)
Flash the boot.img of your desired ROM
Clear Cache Again
Reboot
Should work
Lucky Thirteen said:
TWRP is more complete and a rigourously tested recovery. CWM was modded to work on the HOX+.
First make sure your SDK tool (adb) is correctly installed and also the HTC's drivers. (There is a link for a tutorial in my signature.)
Download the correspondent recovery for your phone International OR AT&T/Telus (N.B. Links are available in the Sticky FAQ)
Flash the Recovery.
Clear Cache
Reboot in Recovery
Install your correspondent version of any ROM.zip you want that is already on your storage. (Otherwise,Sideload a ROM to be able to flash one inRecovery)
Flash the boot.img of your desired ROM
Clear Cache Again
Reboot
Should work
Click to expand...
Click to collapse
CWM wasn't "modded" it's just crap.
Lloir said:
CWM wasn't "modded" it's just crap.
Click to expand...
Click to collapse
I tried to be polite (anyway I am not allowed to talk like that, I never developed any sort of app, neither a ROM or kernel so I am not very qualified to judge others work), I'm sure you understood what I meant.
And yes I agree everything is way more complicated and unstable with CWM.
Please help. I'm having same problem. I can get into bootloader and fastboot and even successfully installed recovery but I can't get into recovery bc I always go to that white htc screen and no idea what to do next. Please please help me. I am on 1.15 software and 1.32 hboot and 4.1.1 Android version
Thank u
Sent from my VZW-I535 using xda premium
Reboot your phone in Bootloader mode (fastboot) you should have this 4 choices :
HBOOT
REBOOT
REBOOT BOOTLOADER
POWER DOWN
leave HBOOT highlighted then press the power button once, a new menu will appear :
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
SHOW BARCODE
IMAGE CRC
From there with the Volume control (up & down) simply select RECOVERY and press Power button one time, your phone should Reboot in Recovery mode.
When in Recovery mode the VERY FIRST thing you will do, is a complete backup of your actual ROM and you will keep it as long as you gonna own the phone, so put this backup in a safe place on your computer and make sure to never delete it.
Thank you but the thing is.. I put twrp on it and version 2.3.3.0 and it won't boot in it. Any ideas why? Then I looked for a more recent recovery and I wasn't sure if this is evita?? So, basically I'm still unable to get into recovery and it goes to that htc white screen.
Btw. Your instructions are excellent
Ty
Sent from my VZW-I535 using xda premium
All right, do you have some time ahead of you?
Yes I am available
Sent from my VZW-I535 using xda premium
OK can you confirm me which phone version you do own
Second line in bootloader
EVITARE_UL (AT&T or TELUS)
or
ENRC2B (INTERNATIONAL)
It is the at&t version
Sent from my VZW-I535 using xda premium
Is your SDK/ADB Tool correctly installed?
Link in my signature...
Yes and I use windows 7 and open my command prompt within platform tools. My drivers say MY HTC. Yes. Ty
Sent from my VZW-I535 using xda premium
OK I will give you a trick...
Navigate to platform-tools of your SDK folder.
Right click and create a New text document
In the new text paste this : c:\windows\system32\cmd.exe
Save it with this name : StartADB.bat (important to save it with .bat extension and overwrite the warning)
Now right click again on your new bat file, and create a shortcut to your desktop.
Now try to adb devices your phone via your new desktop shortcut.
Type this command with your phone plugged : adb devices
You should have your serial in return
OK I am doing that. Please give me a few MIN. Ty
Sent from my VZW-I535 using xda premium
Sure! During that time please download one of these ROMs I will help you installing this ROM because I know them well, then once you'll be up and running you'll decide which ROM will suit more to your need.
Download Elegancia for HTC One X + by clicking HERE