Related
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Hi Folks,
Hope you are well - wasn't sure if anyone has come across this - but anyone seen the Recovery mode flickering / scrolling when flashed on a locked Galaxy Tab 10.1?
Thanks again!
I'm using CWM 4.0.0.4 on my locked P7510, works as intended.
http://forum.xda-developers.com/showthread.php?t=1171089
Thanks yqed,
For some reason when I have CWM 4.0.0.4, and when I reboot into the recovery mode - CWM shows up - but the screen keeps on flickering / scrolling / refreshing all over the place.
I'm wondering if there is something different in my Retail Galaxy Tab 10.1 WIFI vs. the others - I bought mine from Korea (retail). Appears that I have kernel version 2.6.36.3 instead of .4 and the build is EH14.
Thanks.
I to get some lag while using the cmw...
Sent from my Galaxy Tab!
+1
I have a Korean 32Gb wifi Galaxy Tab 10.1, and my CWM Recovery also starts having a seizure when I boot into it. It still seems to be working fine, but it is nearly impossible to use.
I would really like to know what causes this issue.
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
frankus0512 said:
Thanks limenless,
Anyone seen this before? Anyone know if CWM 5 might potentially fix this - seens some thread with regards to this.
I was going to try and wipe the dalvik cache, and others, but seeing the screen is almost impossible to use in recovery mode, having a bit of difficulty there.
Any advice is much appreciated - if you need dumps and others, happy to provide - as long as I get some instructions...
Thanks.
Click to expand...
Click to collapse
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
castiel19 said:
Any luck bro? having same problem here..
Please help.. i realy want to root my tab 10.1
Click to expand...
Click to collapse
Are you using the cwm5?
I'M just curious if so and you still get issues.
Sorry I can't really help.
If you can read this it was sent using my GT-P7510.
HOPING solution
frankus0512 said:
Hi All,
Hope you are well. I just flashed the CWM recovery to a locked tab using ODIN, and upon doing POWER + VOL(-) and getting into the recovery, for some reason the screen with all the menu to do wipes/install just seems to be scrolling all over the place.
When I re-flash the stock recovery back using ODIN, the screen is fine again. Tried both 4.0.0.4 and also the 3.2.0.1 versions, with not much luck.
Has anyone had a similar incident? Is there anything I can do? I wanted to try and flash my custom boot.img.
Thanks heaps in advance!!!.
Click to expand...
Click to collapse
Did you try CMW 5? Preshoot has a tutorial in the development section, its pretty simple just follow it and I think and hope that your issue would be solved!
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Misledz said:
Why dont you try taking a picture/screenshot of it, best would be using ddms.bat in the android development kit to take screenshot's , or just a picture would do great. Hard to guess what's going on, when someone mentioned seizure, I pictured Dr.House
Click to expand...
Click to collapse
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
---------- Post added at 12:49 PM ---------- Previous post was at 12:40 PM ----------
castiel19 said:
Thank you for showing interest to help me.. btw am also big fan of house
Let me explain my situation from the start..
i tried to flash recovery-cwm_4.0.0.4-sam-tab-10.1.tar.md5 following the instruction from the tutorial.. but after i boot into recovery the screen flash.. I will attach you tube video later..
took whole night to fix it with no success, finally decided to re-flash stock rom from firmware P7510ZSKK1_P7510ZZHKK1_TGY.. boot into stock recovery and worked fine..
as i don't want to give up and want my tab 10.1 to be rooted tried again to flash CWM5027 from preshoot.. but same screen flicker happened..
Please help me fix the problem.. or do you know other way to root my tab??
Click to expand...
Click to collapse
how can i copy link of youtube here?? i want to show my screen flicker
Just link it here,
HTML:
[media=youtube] bracket [/media]
Where "bracket" is the ID of your video, those letters at the end. EG: FL7yD-0pqZg
Have you tried Overcome's CWM? I'm using that and it's perfectly fine. PS it's the ver 5 release.
PS; For being an epic House fan I shall see to it that you get it worked out
And to top that off, an offlink to the CWM of Overcome http://www.mediafire.com/?6c5tdmds927npdv
PS: Here's your video, Embedded anyways.
I'm on the same page. My screen flicker after entering CWM recovery mode. Very annoying.
In the development section for 10.1 I was just reading in a thread about a Korean ROM, Pershoot stated something about someones device not being compatible with his kernel. I don't know if either one has to do with the other but I think I read in the same thread of someone having "this problem"
Honestly don't know if anything between this thread and that thread are relevant to each other.
Just thought I'd mention it to see if it helps. sorry if it doesn't apply to anything here.
I somehow fixed it by flashing the tab with an non-HK 3.1 stock ROM using Odlin. then then cwm recovery works fine.
Not really a fix but
You could always just find a pre rooted rom to flash with odin, then once u have the pre rooted rom installed get rom manager and u will no longer have to worry about cwm. Plus u could then flash to whatever rom u need to using rom manager.
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Still not working
appreciate your help Misledz, 002001-Overcome_CWM_Recovery_v5.1.2.6 got same result.. my screen still flicker..
I think I will give up on CWM too complicated for me
Can you just give me tips on how to root my tab 10.1 without CWM (if that is possible)
sunnymui said:
My method allows me to have a clear screen in CWM RECOVERY but after I flashed Galaxy Task 14 I get all blurred screen whenever my Tab is resumed from standby. I must set my screen to never turn off to prevent it flickering again.
May I ask which pre rooted ODLIN ROM do you guys recommend? If possible can you please provide the URL to it? I suspect the flickering problem has relation to the harmony between bootloader, kernel etc so I want to use the exact combination you guys are using.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
What Stock Rom did you use? a, planning to download stock rom
P7510ZCLA1 ## 2012 February P7510OZHLA1 China Download
From samfirmware and flash... hope I can use CWM and instal ROM
for the past 3 hours I tried to search pre rooted ROM that can be flash using Odin with no avail
Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
isimobile said:
I just wanted to say the same. Flash the kernel from pershoot website, it should fix it.
Click to expand...
Click to collapse
Thank you very much. I will try this when i get home from work.
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
nicktaken said:
It doesn´t work for me.
But I dont use 3G anyway so can I just go with P7510 firmware which works?
Click to expand...
Click to collapse
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
brusarp said:
Oh... i don't know that... mine is P7500... and works well both CWM and HC3.2 (with 3G and wifi connection)
Click to expand...
Click to collapse
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
nicktaken said:
Alright I got it to work! I didn´t get it that I should flash the kernel in cwm so I flashed it in Samsungs recovery
Click to expand...
Click to collapse
:highfive: :good:
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
Got the same issue today after installing Task's ROM. The fix worked for me.. Thanks man.. :good:
nicktaken said:
Forgive if there are similar threads about this topic.
I suffered from scrolling cwm so i tried this fix: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
It worked excellent but when i lock my screen and unlock it again it starts flickering like shown in this video: http://youtu.be/P6fMxjFdpJE
I have tried to do factory resets both from recovery and flash an original firmware. Nothing works.
Is it possible to get this fixed or am i screwed?
Click to expand...
Click to collapse
When you tried the fix noted above, I assume the screen didn't roll when you rebooted then into CWM recovery. At that point did you flash a ROM and THEN reboot to find the flicker after locking the screen, or did you do a reboot back into the same stock HC after flashing the bootloader and experience the problem?
I'm contemplating flashing this same bootloader because I have a rolling CWM5.5.0.4 right now and I want to stabilize it - but just so that I can root...not thinking about a ROM just yet...
Just to inform you all, i also had to flash a different bootloader after installing cm9 on my p7511, wich is in fact a 7510. For the records, pershoot made the new bootloader for exactly that issue, not backwards. But seems to work also.
What i deal now with, is that after flashing the uk ics for p7510 to my tab, the stock recovery doesn't recognize my sdcard. Can't mount sdcard...
Could be that a repartitioning with pit file will be necessary afterwards for us all.
Edit: thanks to the wise help of msedek, i know by now that my hind was totaly wrong. My mentioned point has to do with the Changes within stock recovery of ics, which have been made to prevent changes from there.
Getting more confident..
OK so it is sounding like this is definitely better. One more question:
I'm following the stickied root guide in General and that method uses CWM 4.0.0.4...I had reflashed that version. If I want to flash this boot loader should I flash 5.5.0.4 first? Or does it matter if I'm just trying to root right now?
EDIT: Flashed the bootloader which straightened out the recovery!! Successfully rooted after that. Downloaded root apps (ROM manager/Titanium/etc). Then turned off my screen - FLICKER CITY!
http://forum.xda-developers.com/showthread.php?t=1680738 <<< THIS fixed it. Load this kernel into the root of your tablet and flash it with CWM. Seems to have done the trick nicely and I'm exploring my newly rooted tab! My wife no longer wants to kill me either.
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
This method don't work with new ICS firmware. I need a new kernel to work with new ICS firmware . I like the new firmware but i stuck with flickerscreen issue. Can sum 1 help ? Thanks.
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
KeyF said:
I have the same Problem here.
Nothing is working for me, i have tried 2 diferent kernels and still flickering screen after tourning the screen off and on.
Please can anyone help me?
Click to expand...
Click to collapse
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Flicker screen after screen lock\timeout
djmatt604 said:
What ROM or firmware are you running? What exactly have you done with the device up to this point? Are you 3G or WiFi? Need more detail...
Click to expand...
Click to collapse
I have the same problem on my P7500 3G and the minute i load the bootloader to fix CWM recovery rolling i get the screen flickering after lock screen.
Rom: ICS 4.0.4
Build Number: IMM76D.XXLQ8
BaseBand7500XXlQ8
Kernel: 3.1.10
Still stuck.
Hi guys,
Gtab 10.1 Wifi here. Fix didn't worked, somehow...
After installing official ics from Samsung and rooted, i had the same insane flicker issue. I followed this thread - http://forum.xda-developers.com/showthread.php?t=1680738 - , flashed new kernel, and now i cant pass Samsung Galaxy Tab logo for some reason, not even past half an hour.
Im in a dead end, even tried installing back CM9 but it also wont pass the splashing blue screen.
Any ideas?
cheers!
EDIT : After some reboots, finally managed to boot into ICS (CM9) but now i was pushed back to the step 1, where I don't have a working camera, but I have root access and non official ICS from Cyanogen. I am afraid re-doing all my work and get stuck again in the scrambled screen after it updates the kernel..
I'm I missing something, guys?
Hi there!
Are you still having problems?does this guide here work for you?:
http://forum.xda-developers.com/showthread.php?t=1555984
I've found something,the kernel flash package changes our devices' WiFi driver,that's why it doesn't work.
sorry for not giving a fix until tomorrow,it's sleep time here,I know my excuse will be accepted because you all care for basic human needs...
But please inform me if that guide(Pershoot's) has fixed your problem,thanks for that
brusarp said:
Hi!
I've the same trouble like you!
Try this http://forum.xda-developers.com/showthread.php?t=1680738
For me it works well both the CWM recovery that hc 3.2 (no more flickering!)
Click to expand...
Click to collapse
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
reXbeer said:
No it does not work for me.
I have a GT-P7500 with ICS with Build # IMM76D.XWLP6
Please direct me to the correct forum.
thanX
Click to expand...
Click to collapse
Hey guys i solve my problem today i desided to solve it anyway and now i am free from this **** ....
i just go to http://droidbasement.com/galaxy/roms/cm10/p4/ and download
bootloader.tar.md5
latest recovery.tar.md5
cm-10-20121112-EXPERIMENTAL-p4.zip
but before start anything first i format my tab memory then restart in download mode install bootloader.tar.md5 and recovery.tar.md5 ... volla ... reboot in recovery mode volla thats it all is now working perfect .... then i install cm-10-20121112-EXPERIMENTAL-p4.zip now my tab is free on madness ...
must try but first fully clean your tab ...
iff its really work then click on thanks button ...
Dear forum,
I bought a galaxy i9100 second hand with Austrian T-Mobile branding. It came with android 3.5.2, i updated it to 4.0.3 via KIES, no problem. My plan is to root it to be able to flash cyanogenmod afterwards. Now my pain: I am not able to enter either download-mode or recovery-mode by any means. Of course I tried the necessary key combinations (yes, even following tutorial vids). It always boots with the usual samsung logo, then t-mobile logo and finally homescreen. After hours of messing around I even built an USB-jig, following the instructions in http://forum.xda-developers.com/showthread.php?t=819551. Nothing happens! Of course i cannot guarantee I soldered everything correctly, but still...
After searching the www for hours i do not encounter anyone reporting such an issue. People have problems with download-mode when the device is bricked or something, but in my case the t-mobile android works perfectly fine apart from that.
i noticed some other strange behaviour: when i take the battery out and put it back in, the device boots automatically. i don't think this is normal, is it?
Are there any suggestions out there? I am completely clueless and desperate by now...
here are my specs from the phone utilities:
Android 4.0.3
Basebandversion: I9100BOLP5
Kernel-Version: 3.0.15-i0100BOLPE-CL000000
[email protected] #3
Build: IML74K.BOLPE
Swith off the phone, hold volume up and menu button then press power and hold this 3 buttons 10 sec, if android start normally this will br weird for me.
Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2
I did this about 10 times. The samsung logo comes up. for a little moment it goes out, thet comes back. After some seconds the usual t-mobile logo animation appears. then home-screen.
And yes! It is absolutely weird, that's why I gave up and started asking
rudigus said:
I did this about 10 times. The samsung logo comes up. for a little moment it goes out, thet comes back. After some seconds the usual t-mobile logo animation appears. then home-screen.
And yes! It is absolutely weird, that's why I gave up and started asking
Click to expand...
Click to collapse
If u can't access recovery with buttons use app. ROM toolbox has reboot into recovery if you need to root too ask and I'll send link for cwm zip u can flash this then reboot Into cwm recovery then flash ROM with root no yellow triangle
s2 RR jb siyah
Christiancs1969 said:
If u can't access recovery with buttons use app. ROM toolbox has reboot into recovery if you need to root too ask and I'll send link for cwm zip u can flash this then reboot Into cwm recovery then flash ROM with root no yellow triangle
s2 RR jb siyah
Click to expand...
Click to collapse
Just use adb and use adb reboot Recovery comand
And theres no way u had 3.5.2 ...
That would be honeycomb and thats a tablet firmware ... Theres no suchthing for s2
Sent from my GT-S5830 using xda premium
Christiancs1969 said:
if you need to root too
Click to expand...
Click to collapse
in the first place i am looking for a way to root it. all guides i have encountered require download/recovery mode, both of them I obviousliy cannot access.
ask and I'll send link for cwm zip u can flash this then reboot Into cwm recovery then flash ROM with root no yellow triangle
Click to expand...
Click to collapse
i don't quite understand how you mean this. how could I flash the cwm.zip without being able to enter recovery? forgive me, i'm a n00b (but with ambition).
SnowPluralism said:
Just use adb and use adb reboot Recovery comand
Click to expand...
Click to collapse
you mean using android sdk and connecting it to the device? have no experience with this yet...
And theres no way u had 3.5.2 ...
That would be honeycomb and thats a tablet firmware ... Theres no suchthing for s2
Click to expand...
Click to collapse
Yes, my fault. It was gingerbread...
SnowPluralism said:
Just use adb and use adb reboot Recovery comand
Click to expand...
Click to collapse
Figured out what you want from me and I finally reached Recovery mode!!! THANKS A LOT!
Okay here`s the situation.
My GT-P7500 a.k.a p4 is having a problem. Whenever I boot up, it will freeze at the boot animation, and power off if not charging and go to the charging screen if is plugged. I was using SlimBean when I had the problem, flashed AOKP and still the same. Next, when I get to recovery, wiping data takes a looooooooooooong time and never finished (Seriously 3 hours and nothing). Wiping cache`s fine. Tried using TWRP but then I`m stuck on the TWRP Boot screen. I reverted back to CWM but still the same. Is it bricked or something? Is there any solution? I`m hoping for an answer ASAP. Thank you...
Acerpeng229 said:
Okay here`s the situation.
My GT-P7500 a.k.a p4 is having a problem. Whenever I boot up, it will freeze at the boot animation, and power off if not charging and go to the charging screen if is plugged. I was using SlimBean when I had the problem, flashed AOKP and still the same. Next, when I get to recovery, wiping data takes a looooooooooooong time and never finished (Seriously 3 hours and nothing). Wiping cache`s fine. Tried using TWRP but then I`m stuck on the TWRP Boot screen. I reverted back to CWM but still the same. Is it bricked or something? Is there any solution? I`m hoping for an answer ASAP. Thank you...
Click to expand...
Click to collapse
had the same issue on my p4wifi...it is a corrupted file.
1) you can odin a rom..this will wipe the data completely
or
2) try to flash the last rom you were successfully on..then wipe the sdcardthis will wipe the data completelyand cache..dalvik. Then try to boot it up.
If second option doesnt work( because of the dirty flash ). Then i would either use odin or push a rom to the device and do a clean install.
Just had a brain storm..you could use twrp file manager to delete files you dont need. Might get lucky and its something you downloaded recently. ( wasnt a twrp recovery when this happened to me )
Gil81 said:
had the same issue on my p4wifi...it is a corrupted file.
1) you can odin a rom..this will wipe the data completely
or
2) try to flash the last rom you were successfully on..then wipe the sdcardthis will wipe the data completelyand cache..dalvik. Then try to boot it up.
If second option doesnt work( because of the dirty flash ). Then i would either use odin or push a rom to the device and do a clean install.
Just had a brain storm..you could use twrp file manager to delete files you dont need. Might get lucky and its something you downloaded recently. ( wasnt a twrp recovery when this happened to me )
Click to expand...
Click to collapse
Hi Gil,
TWRP freezes on its boot screen. I`ll try flashing rom from odin. I`ll get back to you when I`m done. Thanks!
Acerpeng229 said:
Hi Gil,
TWRP freezes on its boot screen. I`ll try flashing rom from odin. I`ll get back to you when I`m done. Thanks!
Click to expand...
Click to collapse
So you cant use twrp's internal file manager...or are you saying you did and that process didnt work. Just wondering..the odin should definitely work. Just sucks to loose all your files..
but as I said... Ive been there too..:silly:
Gil81 said:
So you cant use twrp's internal file manager...or are you saying you did and that process didnt work. Just wondering..the odin should definitely work. Just sucks to loose all your files..
but as I said... Ive been there too..:silly:
Click to expand...
Click to collapse
I went around Google searching for p4 ROMs that are in ODIN format. Sadly, nothing found. Where did you get the ROM for your p4wifi?
Acerpeng229 said:
I went around Google searching for p4 ROMs that are in ODIN format. Sadly, nothing found. Where did you get the ROM for your p4wifi?
Click to expand...
Click to collapse
The question is only one part of the answer grasshopper...How you ask( google ) it, is the rest..Lmao
Here's a Link to sammobile. Just scroll down and pjt in your device in the search box on the right and pich the right firmware. You will need to make a free account with them to download.
Gil81 said:
The question is only one part of the answer grasshopper...How you ask( google ) it, is the rest..Lmao
Here's a Link to sammobile. Just scroll down and pjt in your device in the search box on the right and pich the right firmware. You will need to make a free account with them to download.
Click to expand...
Click to collapse
Okay, installed stock ROM but now I`m in a bootloop. This time no forced reboot or something, just bootloop.
Gil81 said:
The question is only one part of the answer grasshopper...How you ask( google ) it, is the rest..Lmao
Here's a Link to sammobile. Just scroll down and pjt in your device in the search box on the right and pich the right firmware. You will need to make a free account with them to download.
Click to expand...
Click to collapse
OMGGGG!!! Gil!!!!!!! THANK YOU VERY MUCH!!! I installed Slim Bean and now IT WORKS!!! I DON`T KNOW HOW TO THANK YOU MAN!! I`ll come back to you if any problem occurs.
Acerpeng229 said:
Okay, installed stock ROM but now I`m in a bootloop. This time no forced reboot or something, just bootloop.
Click to expand...
Click to collapse
Just for future reference..when you install a stock rom, like those from sammobile. It is usually needed to wipe data factory reset to get it to boot.
Sorry i didnt get back to you sooner..work is crazy, Lol
Glad you have it up...if you need any other help. Just post in my Q&A thread..I try to check it often.
Hi guys, I've started using a SGS2 but it has broken volume button. I install TWRP and flash RR built by @linusdan. Then I install substratrum theme and swiftblack theme. Then I was too lazy to uninstall the theme via the app and I flashed the rescue package in my phone's internal memory and it's bootloop, I've already tried adb, I typed "adb reboot recovery" and it just stuck like that.By the way, my SGS2 also have a problem with the usb port, when I plug in to charge, it know that I'm charging but the battery won't get anymore precent, I tried with another usb board but it doesn't work and when I plug it to my pc, I have to put its screen head down so the PC can detect it. Can anyone help me out? Thanks in advance
vdhero said:
Hi guys, I've started using a SGS2 but it has broken volume button. I install TWRP and flash RR built by @linusdan. Then I install substratrum theme and swiftblack theme. Then I was too lazy to uninstall the theme via the app and I flashed the rescue package in my phone's internal memory and it's bootloop, I've already tried adb, I typed "adb reboot recovery" and it just stuck like that.By the way, my SGS2 also have a problem with the usb port, when I plug in to charge, it know that I'm charging but the battery won't get anymore precent, I tried with another usb board but it doesn't work and when I plug it to my pc, I have to put its screen head down so the PC can detect it. Can anyone help me out? Thanks in advance
Click to expand...
Click to collapse
I've never been in this situation. I dont know how to help you. Sorry.
Tip: buy another device
linusdan said:
I've never been in this situation. I dont know how to help you. Sorry.
Tip: buy another device
Click to expand...
Click to collapse
I did bougat another device, a nokia1 and a note 8 but both of them don't have roms or anything I can play with, the s2 has plenty of roms. I can't live without installing custom roms and tweaks. I have an idea, I can wipe the data with adb, do you know how to wipe system with adb? As without os, the phone will be forced to boot into recovery.
vdhero said:
As without os, the phone will be forced to boot into recovery.
Click to expand...
Click to collapse
Look here:
- https://www.youtube.com/watch?v=BxpFqyFq0Jw
- https://www.youtube.com/watch?v=47Vy1KcbWh0
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
- https://www.youtube.com/watch?v=1F6C13O76qk
toy_story said:
Look here:
-
-
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
-
Click to expand...
Click to collapse
Thanks dude, I'll try out but I'll flash the cwm then flash twrp. I've ordered a repair kit and the sgs2 volume button.BTW , my sgs2 has a problem with usb/charging/whatever. When I plug it in, it say that it's charging but the battery won't get anymore precent. If I connect it to the pc, I have to turn its face down, otherwise, pc won't detect it.
toy_story said:
Look here:
- https://www.youtube.com/watch?v=BxpFqyFq0Jw
- https://www.youtube.com/watch?v=47Vy1KcbWh0
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
- https://www.youtube.com/watch?v=1F6C13O76qk
Click to expand...
Click to collapse
Don't mind the post i posted before, I fixed the usb, it was a problem with the cable, I replaced the cable and every command in adb works, except adb reboot and adb reboot recovery. By some how, i typed ""adb shell" and then "recovery", I bring me to the PhilZ recovery and said : Powered by dorimanX kernel and I can't see any menu like wipe or anything. Do you have any idea?
Almost forgot, I wiped system with erase_image but it still won't boot to TWRP. And the PhilZ of the DorimanX kernel is a post recovery, I figured it out about that by somehow
Update: I tried to format kernel partition to see if it can force the phone boot to TWRP. After formatying, it still won't bring me to TWRP. Then I tried samsung 300k tool but phone no longer be detected by the pc. I tried to make my own usb jig without resistor as I couldn't find any resistor by using paper but no luck. I've found some good deal on the internet, I've ordered a pack that include 100 100k ohms for half a buck. I also ordered a usb jig from china for 2 bucks but it'll arrive after 1 month.
toy_story said:
Look here:
- https://www.youtube.com/watch?v=BxpFqyFq0Jw
- https://www.youtube.com/watch?v=47Vy1KcbWh0
- https://forum.xda-developers.com/showpost.php?p=71481676&postcount=587
- https://www.youtube.com/watch?v=1F6C13O76qk
Click to expand...
Click to collapse
So, after a few days, I made a usb jig same as how he made in the video but it doesn't work. I've done some research, and found a thread, it only work for GB bootloader but mine has ICS bootloader. Now,I'm trying to find a vulome button to replace. It's so hard to find replacement for this phone. BTW, thanks for helping me.
I've got some updates. The volume button never arrive. Then by some how, When I plugged my phone to charge, it started to boot into recovery and I reinstalled the ROM. Problem solved.
So after solving my problem, I decided to install stock ROM. I used the JIG and booted to DL Mode and install Stock rom you provided in the post. Then I realize that I can't reboot to recovery anymore. I tried some apps and it just reboot. I found that I need hardware button, so... do you have any idea ?
vdhero said:
do you have any idea ?
Click to expand...
Click to collapse
Hi, you now have the official android 4.1.2 installed!
1. Make root permissions - [ROOT] Framaroot, a one-click apk to root some devices
2. Set the - Shutdown Menu (ROOT)
And through the application of restart in the recovery, it's all simple.
3. You can install - [ROOT] Mobile ODIN v4.20
Good luck ...
toy_story said:
Hi, you now have the official android 4.1.2 installed!
1. Make root permissions - [ROOT] Framaroot, a one-click apk to root some devices
2. Set the - Shutdown Menu (ROOT)
And through the application of restart in the recovery, it's all simple.
3. You can install - [ROOT] Mobile ODIN v4.20
Good luck ...
Click to expand...
Click to collapse
Thank you very much, I'm back on LOS 14.1 now . But I can't mount my sdcard since I installed stock rom. I can't format it because I have lots of data inside and i still can mount it in other phones
So, I'm back on LOS 14.1, I also found a tip to install LOS 14.1 without getting the triagle, you can use the JIG to remove triagle but I found this one can help you not getting the triagle. As my phone's volume button is broken, I got myself a usb JIG to reboot to Download Mode. I install stock ROM(JB) with odin the I found that I couldn't install anything alse with odin. I decided to root my SGS2 with framaroot , then I installed mobile odin lite and FlashKernel. I downloaded the files from your help thread and flashed the IP kernel + CWM by using the mobile odin. Then I flashed files and Installed LOS 14.1. After a few hours using, I found that the triagle is gone.
BTW, can you share this post by quoting it to your help thread? That will help lots of people
linusdan said:
I've never been in this situation. I dont know how to help you. Sorry.
Tip: buy another device
Click to expand...
Click to collapse
Hi, I was not in that situation either, but I managed to help him.
You can never give up immediately, there must always be a belief that a miracle will happen and when this happens you are very pleased with yourself.
---------- Post added at 09:09 ---------- Previous post was at 08:59 ----------
vdhero said:
BTW, can you share this post by quoting it to your help thread?
Click to expand...
Click to collapse
You can write yourself a detailed instruction here - https://forum.xda-developers.com/ga...g-clean-loss-data-installation-t3712409/page5
That will help lots of people!
toy_story said:
Hi, I was not in that situation either, but I managed to help him.
You can never give up immediately, there must always be a belief that a miracle will happen and when this happens you are very pleased with yourself.
Click to expand...
Click to collapse
Okay, I overdid it when I told him to buy another device, but I was honest when I said I couldn't help.
I'm glad you managed to help
So, I've just remembered that my phone is a Korean version and the code is SHW-M250S, I found that it has NFC and DMB-T. When I bought the phone, the old owner did helped me to convert it to I9100, now I wanted to see if
NFC and DMB-T. I going to install SHW-M250S stock ROM. Can anyone tell me if I can install I9100's ROM in SHW-M250S without converting it to I9100?