[Q] Player 5.0 doesnt want to go standby. - Samsung Galaxy Player 4.0, 5.0

Hello Every body,
Today when i tried to set my Galaxy player standby it just flashes back on, i already tried to clean the sides. and did a master reset.
shame it didnt work.
Maybe somebody has a answer.
Greets Mark.

What do you mean by standby? Do you mean deep sleep?
Sent from my YP-G70 using xda app-developers app

Ah found a solution,
but now after installing this rom /showthread.php?t=1689310
my buttons dont work anymore. great.

Related

[Q] Why is my folio 100 wakes up regularly ?

With my folio 100 with an updated Dexter ROM (1.4*), it wakes up regularly (I would say about each 15 minutes). This make the battery life VERY short.
Does anyone have the same problem?
Does anyone have a solution for that purpose?
Best regards.
RaiFolio
Looks like it´s a nvidia problem, i have the same issue every now and then.
Response from dexter:
its a hardware bug, see Nvidia site on harmony development boards and tango.. they confirm they did not fix the issue.
Im having that problem too, so we currently dont have any solution?
Sent from my Folio 100 using XDA Premium App
nightmarept said:
Looks like it´s a nvidia problem, i have the same issue every now and then.
Response from dexter:
its a hardware bug, see Nvidia site on harmony development boards and tango.. they confirm they did not fix the issue.
Click to expand...
Click to collapse
I am not fully convinced that it is a hardware problem. My folio wakes up with all roms that are based on the stock rom. But I did not have a single wakeup with CM7.
I would rather blame the Nvidia drivers (ressource manager?) than the hardware itself for the wakeup bug (except that it may be that the wakeup is a dirty workaround for another hardware problem).
Hello,
I also had that problem at first, then I went in the wifi settings, pressed the menu button to bring up advanced seetings, set the wifi sleep policy to never and then disabled wifi and gps in the Location & security settings.
That seemed to work for me, it might not work for others...
Regards,
Luis
Thanks Nyaria, i will try today if that works
Sent from my HTC Hero using XDA Premium App
I'll try it too.
Didnt work
Sent from my Folio 100 using XDA Premium App
Ok, I also removed a lot of apps that I don't need, I'll make a list of what's remaining and maybe the problem is with just one app.
I just finished a standby test with Foliomod 1.4 and got near 30 hours of standby with light email usage... not bad
Regards,
Luis
hello
for the problem of waking up the solution is to leave the wifi constantly under foliomod 1.4
if your portfolio suffers from freezing after waking up to SetCPU mini max 1000 604
but also
I have tried the ROM Mblaster very very very good work fluid
The main problem is that the wifi does not reconect
J So I installed the second version of max 1000
It is less fluid, but the wifi works well, but back then SOD j've given SetCPU mini max 1000 and 604 more problem
If you can solve the problem of wifi I am ready to test because my portfolio suffers whenever SOD
thank you for your very good work
sod negative return
ROM handed CyanogenMod 7.0.0 Oc 1500 with a 1000 SetCPU
and shutdownquick
can it be the folio buttons?
with my folio the screen wake's up and the search button flashes.
also wen i am working with it then the google search pops up
i tried deinstall the google search app but no effect on my broblem.
sorry for the bad english hope you guys can read it
I'm so thankful for this thread, cos the wifi advanced setting trick has worked for me!
my foliomod kept turning itself on every 60 secs (can you believe it), after it turned it off, and it was irritating me no end. now it stays off once i set the wifi policy to never.
thanks!
After few month there isn't solution for it ?
I think that problems is that folio search wifi network on every x seconds. That can be changed in build.prop file.
Sent from my IDEOS S7 Slim using XDA App
Jon2555 said:
I think that problems is that folio search wifi network on every x seconds. That can be changed in build.prop file.
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
I tried to turn off wifi but nothing change.
Try PowerSwitch app
Sent from my IDEOS S7 Slim using XDA App
Jon2555 said:
Try PowerSwitch app
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
Just installed, i try it!
stex_80 said:
Just installed, i try it!
Click to expand...
Click to collapse
No good, same result,... have you a best software setting to suggest me?
Turn on acceleration sensor and lock app in memory. When Folio screen turn on, after ten seconds it will turn off
Sent from my Xoom using Tapatalk
I had this issue with the honeycomb rom, v0.4 , turning back to foliomod 1.4 now all work good, but i can't turn off wi-fi during the screen-off, cause the wi-fi took a lot of time to take the network. I noticed that with honeycomb the "back" button was glowing and then the screen power up in lock state...maybe the problem could be folio button...

Why all ics switches to silent mode by itself

At least once a day, in all ics os's i tried on sveral devices. Looks like a bug in the os.
Sent from my GT-I9300 using Tapatalk 2
There is a setting in ics, called -i believe- quiet hours...check that see if it's perhaps default on?
Can't seem to find it in the settings.
Sorry, I'm on froyo now...I think it was under rom control if you're using a custom rom.
1902 said:
At least once a day, in all ics os's i tried on sveral devices. Looks like a bug in the os.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Agree same problem on all the ice roms plz help
Solve the problem
Hi,
I had the same issue with my Galaxy Nexus but i found a way to solve the problem not permit solution but by using app called " Volume Locker " which will force the device to turn the volume up once it goes silent by sudden.
I am having this problem since galaxy s2. The mobile automatically switches between silent, ringtone, and vibration mode. I think one or 2 apps might be causing this behavior. Really annoying

My galaxy s3 dont turn off

Hi
i cant turn off my device its make a restart
when i choose power off its make a power off and then after 2 seconds make auto power on
can someone halp me with it?
and sorry for my bad english
Pull out the battery and then try after you have turned the phone back on again.
Sent from my HTC One X using xda app-developers app
I had that two hours ago after downloading new OTA ...Had same problem and I removed all tasks, restarted and everything was fine. As ste said pull out the battery and try again
dude i had the same exact problem. it was fixed by flashing a custom kernel. look here. i made a thread earlier on http://forum.xda-developers.com/showthread.php?t=1772264

[Q] Touchscreen issues

Hello, recently i have changed the touchscreen of this x10i. The new one works correctly, but when the phone is locked, the touchscreen stops working, and only works after removing the battery. What can it be? Can it be a software issue? Im using stock android 2.3.3, clean install..
Can it be a driver related issue? I guess the phone receives the signal to turn off the touch, but it doesnt receive it to turn on. I would take a log, but im a noob a it. If anyone could help me.. Cheers
Anyone?
Sent from my Galaxy Nexus using xda app-developers app

[HELP] CM9 Proximity sensor

Hi everyone, i'm using CM9 ROM and i'm facing a problem with proximity sensor...
When in a call, the screen don't turn off and then it gets locked...
To end the call I have to unlock the screen and tap on end button...
Does anybody have the same issue?
I love CM9 ROM, but I always have to change to stock (since this is not the first or second time I see this), this bug really piss me off
Tried many kernels but the problem persist
If someone knows a way to fix that would be GREAT!
Thanks.
I dont have those problem.Currently im using cm9 fxp211 and kernel
Sent from my SK17i using xda app-developers app
Well, every time I flash CM9 i get this thing...
It's weird, cos I've never seen someone with this problem =/
I'll search for a fix... No succes till now...
Maybe there is a way to calibrate, I just need to learn how!
Thank you
*#*#SERVICE#*#* and service test your proximity to check whether it is working properly or not
Sent from my LT28h using xda premium
I dont have those problem too. Maybe sensor crash?
Tried to test everything and realized that even auto brightness is working...
Don't know what is happening here...
Tried to disable auto brightness to see if was some kind of conflict... Still the same

Categories

Resources