Related
Hello
I used Ramexpander in Ice Cream Pureness because it supported swap. I had no errors during the week, but now i switched to Xperia Ultimate HD and now. My bootloader is locked so obviously i used stock kernel. I thought that swap is depended on the kernel, but now in ultimate hd ram expander says my kernel doesn't support it. It is kinda wierd because i have the exact same kernel as in ICP but now i can't use swap.
but i really liked that i can have multiple apps open and could easily switch between them without the need of reloading them. can someone explain me this? :victory:
Meridani said:
Hello
I used Ramexpander in Ice Cream Pureness because it supported swap. I had no errors during the week, but now i switched to Xperia Ultimate HD and now. My bootloader is locked so obviously i used stock kernel. I thought that swap is depended on the kernel, but now in ultimate hd ram expander says my kernel doesn't support it. It is kinda wierd because i have the exact same kernel as in ICP but now i can't use swap.
but i really liked that i can have multiple apps open and could easily switch between them without the need of reloading them. can someone explain me this? :victory:
Click to expand...
Click to collapse
is it safe to make a swap ?
doesn`t harm our device or memory card ?
kuzenka said:
is it safe to make a swap ?
doesn`t harm our device or memory card ?
Click to expand...
Click to collapse
may reduce the life of your SD.
TheDarkDefender said:
may reduce the life of your SD.
Click to expand...
Click to collapse
It reduces it significantly but these cards can bear a lot of write cycles... your battery or phone will crack first and if the card is starting to die you can tell because it's capacity decreases because of the degradation of cells but it's a long process
Meridani said:
It reduces it significantly but these cards can bear a lot of write cycles... your battery or phone will crack first and if the card is starting to die you can tell because it's capacity decreases because of the degradation of cells but it's a long process
Click to expand...
Click to collapse
if you are not worried about it,then go ahead.
TheDarkDefender said:
if you are not worried about it,then go ahead.
Click to expand...
Click to collapse
That is why i started the post, because i dont know why i can't make swap on same kernel. It is related in some way to the rom itself too.
Meridani said:
That is why i started the post, because i dont know why i can't make swap on same kernel. It is related in some way to the rom itself too.
Click to expand...
Click to collapse
no...swap has to be pre-enabled on the kernel. Ask the kernel dev about it,or use one with swap.
---------- Post added at 08:35 AM ---------- Previous post was at 08:34 AM ----------
you can also add it through a flashable zip.
TheDarkDefender said:
no...swap has to be pre-enabled on the kernel. Ask the kernel dev about it,or use one with swap.
---------- Post added at 08:35 AM ---------- Previous post was at 08:34 AM ----------
you can also add it through a flashable zip.
Click to expand...
Click to collapse
I am on stock and i didnt applied any zip but swap was enabled on other rom but now that i have changed the rom i don't have. Stock sony kernel because my bl is locked
You need zram_start.sh inside system/bin (for stock kernel)for zram to work,see if there is,if not use the one from previous rom..
Inviato da me!
Sirs, have any idea to make stock kernel to be swap support?
I am wondering if there is any method with which i can activate swap support as my kernel doesnt support it.
But i have heard that with init.d u can modify kernel settings
Is it possible?
If yes than how?
Any guide or script please
I am on stock ics 4.04 with mtk 6577 based phone and has 512mb ram
Anyone
Implementing a swap file in cache then use an initial.d script would solve your problem in this case, what I'm questioning is does this really work without kernel support?
Look into BetterMultitaskingFix by mattiadj in the int galaxy s3 forum (use google), he did made something similar.
Sent from my GT-I9300 using xda premium
Thnx i will look into it
shantam said:
Thnx i will look into it
Click to expand...
Click to collapse
I could be wrong, but I am quite certain your kernel has to support swap in order to use it. The only thing you could do via init.d is enable a swap file on boot. Such were the findings of my research.
How do you know your kernel does not support swap? I think most stock 4.0.4 have it; its just not enabled by default. Did you use the 'free' command in terminal?
I am using Xperia Mini Pro SK17i rooted and bootloader unlocked working with stock kernel & stock ROM ICS .587... I have read some topics and threads but I am still a noob and I want to know some specific answers for the below questions if you can help me guys and I am sure that it is not only me who needs to know these answers..
1- What are the system apps on Xperia Mini Pro SK17i ICS .587 which can be safely uninstalled without affecting negatively on the device? "Please don't provide me with Arc S apps as they are not the same"
2- Can I install CWM through X-Parts app after I unlocked my bootloader or not? If it can't be so how can I install CWM on my unlocked bootloader device?
3- After installing CWM, I want to take a backup from my current ROM on my SD card.. Will the backup be for the ROM only or the ROM and the kernel? And how much space will I need on the SD for this backup or it depends on what?
4- If the backup will be for the ROM only so how can I take a backup for the stock kernel or how can I get it?
5- After I will take the backup through CWM, I want to install a custom kernel to be working on the stock ROM in order to make overclocking for my CPU but I don't have a PC to do it through flashtool, so Can I do it through CWM? If yes so please tell me how?
6- I will very much appreciate your support to suggest me some kernels can work with my stock ROM and supports overclocking and increase total RAM if it is possible as I searched about kernels but I found that most of them support CM9 & CM10 & Some other custom ROMs.. I am looking for some kernels like the stock kernel to be working on the stock ROM and provide me with all device features but can support overclocking and increase RAM if it is possible as the stock kernel doesn't support this. "I am not asking about best kernel, I just want to know which kernels can support the overclocking and increase RAM and at the same time working on the stock ROM"
7- I have 2 partitions on my SD card 16 GBs (KingStone Class 2) "EXT2 & FAT32".. How can I add swap file "RAM" to the EXT2 partition? And will it affect on my SD card negatively or make its life time shorter or not? And what about zRAM on EXT2 partition, is it available or no? If yes so please tell me how to do it.
8- Anyone found any market enabler app for Play store after it is updated to version 4.0.27? If yes so please provide me with the app name or link and I will very much appreciate it.
9- If I am a hard gamer so should I activate Force GPU Rendering & Don't keep activities from "Settings > Developer Options" or not? What they really do? Or if you have any suggestions for gamers on SK17i please tell me about it and I will test any then feed you back.
10- If I want to make a guide for the newbies "Noobs" to share them my experience and to make it easy for them, shall I post it in general or development? And should I refer back to someone before I post the guide "Keeping in mind that I will mention the people who helped me out with their posts or threads and I will add their links"? If yes so please tell me who?
I am so sorry for all these questions but I believe in you guys and I will very much appreciate your usual support.
Best Regards,
DoLcEka
Sent from my SK17i using xda app-developers app
1. I use arc s one and disregard the apps not present. Don't know if it is available for us
2. Yes u can use xparts but after unlocking its easier to just f'ash a custom kernel as they have recovery
3.only rom, we can't flash kernel via cwm yet. Size depends on rom. Stock is the highest.
4. Don't know about taking backup of kernel but u can get the stock kernel ftf file. Besides what's there to backup in a kernel?ie what's the diff btw new kernel and backed up one?
5 flashing on the go is not supported yet
6. Don't know. Try urself
7,8 don't know
9. Try asking in the gaming thread in general.
10. In general. Never in development. Dev is only for ORIGINAL roms, kernels etc. Don't think u need to ask anyone, if anyone helps, just add credit.
Regards
-N
Thanks a lot man for your fast response
I will be w8ing more answers, maybe some other answers can help me more.
Thanks in advance guys.
Sent from my SK17i using xda app-developers app
Any updates, support or help guys !?
Hello there.. Anybody wanna help or support me ??
Thanks in advance
Sent from my SK17i using xda app-developers app
dolceka said:
I am using Xperia Mini Pro SK17i rooted and bootloader unlocked working with stock kernel & stock ROM ICS .587... I have read some topics and threads but I am still a noob and I want to know some specific answers for the below questions if you can help me guys and I am sure that it is not only me who needs to know these answers..
1- What are the system apps on Xperia Mini Pro SK17i ICS .587 which can be safely uninstalled without affecting negatively on the device? "Please don't provide me with Arc S apps as they are not the same"
2- Can I install CWM through X-Parts app after I unlocked my bootloader or not? If it can't be so how can I install CWM on my unlocked bootloader device?
3- After installing CWM, I want to take a backup from my current ROM on my SD card.. Will the backup be for the ROM only or the ROM and the kernel? And how much space will I need on the SD for this backup or it depends on what?
4- If the backup will be for the ROM only so how can I take a backup for the stock kernel or how can I get it?
5- After I will take the backup through CWM, I want to install a custom kernel to be working on the stock ROM in order to make overclocking for my CPU but I don't have a PC to do it through flashtool, so Can I do it through CWM? If yes so please tell me how?
6- I will very much appreciate your support to suggest me some kernels can work with my stock ROM and supports overclocking and increase total RAM if it is possible as I searched about kernels but I found that most of them support CM9 & CM10 & Some other custom ROMs.. I am looking for some kernels like the stock kernel to be working on the stock ROM and provide me with all device features but can support overclocking and increase RAM if it is possible as the stock kernel doesn't support this. "I am not asking about best kernel, I just want to know which kernels can support the overclocking and increase RAM and at the same time working on the stock ROM"
7- I have 2 partitions on my SD card 16 GBs (KingStone Class 2) "EXT2 & FAT32".. How can I add swap file "RAM" to the EXT2 partition? And will it affect on my SD card negatively or make its life time shorter or not? And what about zRAM on EXT2 partition, is it available or no? If yes so please tell me how to do it.
8- Anyone found any market enabler app for Play store after it is updated to version 4.0.27? If yes so please provide me with the app name or link and I will very much appreciate it.
9- If I am a hard gamer so should I activate Force GPU Rendering & Don't keep activities from "Settings > Developer Options" or not? What they really do? Or if you have any suggestions for gamers on SK17i please tell me about it and I will test any then feed you back.
10- If I want to make a guide for the newbies "Noobs" to share them my experience and to make it easy for them, shall I post it in general or development? And should I refer back to someone before I post the guide "Keeping in mind that I will mention the people who helped me out with their posts or threads and I will add their links"? If yes so please tell me who?
I am so sorry for all these questions but I believe in you guys and I will very much appreciate your usual support.
Best Regards,
DoLcEka
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
1. Here are all the system apps present in .587 which you can remove :- http://forum.xda-developers.com/showthread.php?t=2048279
2. Don't install CWM from x-parts. It doesn't work properly sometimes! Use this :- http://theunlockr.com/2012/06/07/how-to-install-clockworkmod-recovery-on-xperia-mini-and-mini-pro/
3. The backup is always for the ROM. You cannot backup the kernel. The size varies on the ROM it can go from 600MB to 5GB. So you better have a 16GB memory card for backups and some of your games/music!
4. As stated, there is no backup for stock kernel! You can flash the ftf of the kernel.
5. Not possible!
6. Most of the kernels support overclocking upto 2GHz. But now devs are making maximum overclocking possible upto 1.6GHz as higher the overclocking, higher risk of device being bricked and s***! Also, all android versions have different kernels. http://forum.xda-developers.com/showthread.php?t=2148684
7. No idea. Sorry
8. No. There is no market enabler for play store version 4.0.27.
9. If you're a gamer and play HD games on your device, i'll recommend to flash stock GB as it is by far the smoothest ROM in terms of Gaming! Also, you can try CM9/CM10/CM10.1 but they need overclock! And about GPU rendering :- http://pocketnow.com/2012/05/25/what-is-force-gpu-rendering-in-ice-cream-sandwich
10. Obviously the GENERAL FORUM! :silly:
Hope i resolved some of your questions!
8 Q : no.. But u can install the old one.. Then use Freedom app
sent from my st15i using xda-app
Hello ishan and thank you so much for ur reply and support.. I tried to install CWM through X-Parts but it didn't work, I think because I have unlocked my bootloader.. And I checked the link you provided me but it is for stock ROM 2.3.x so it will not work on my ROM 4.0.x.. So how can I install CWM on my unlocked bootloader device or what are the alternatives ?
Thanks in advance man for you help.
Sent from my SK17i using xda app-developers app
dolceka said:
Hello ishan and thank you so much for ur reply and support.. I tried to install CWM through X-Parts but it didn't work, I think because I have unlocked my bootloader.. And I checked the link you provided me but it is for stock ROM 2.3.x so it will not work on my ROM 4.0.x.. So how can I install CWM on my unlocked bootloader device or what are the alternatives ?
Thanks in advance man for you help.
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
Just flash a custom kernel! (I guess) all custom kernels here are prerooted, just check out development section! :good:
How to flash the kernel is in my guide (link in my signature)
Sent from my Nexus 7 running Android 4.2.2
dolceka said:
Hello ishan and thank you so much for ur reply and support.. I tried to install CWM through X-Parts but it didn't work, I think because I have unlocked my bootloader.. And I checked the link you provided me but it is for stock ROM 2.3.x so it will not work on my ROM 4.0.x.. So how can I install CWM on my unlocked bootloader device or what are the alternatives ?
Thanks in advance man for you help.
Sent from my SK17i using xda app-developers app
Click to expand...
Click to collapse
It will work with ICS. I installed CWM with the same thing on stock .587. Just be sure that you get root and check once on flashtool! :good:
It'll work. Trust me or as you have am unlocked BL, flash any kernel supported by ICS. Real simple :highfive:
mihahn said:
Just flash a custom kernel! (I guess) all custom kernels here are prerooted, just check out development section! :good:
How to flash the kernel is in my guide (link in my signature)
Sent from my Nexus 7 running Android 4.2.2
Click to expand...
Click to collapse
Hey Mihahn, Thanks a lot for your reply & by the way, I am a fan of you and your good works
I want to PM or Call you to know some info from your BOOK So Can I !? xD
Mohamed Hashem said:
8 Q : no.. But u can install the old one.. Then use Freedom app
sent from my st15i using xda-app
Click to expand...
Click to collapse
Ya 3am Mohamed send me your dial w ana hakalemak
dolceka said:
Hey Mihahn, Thanks a lot for your reply & by the way, I am a fan of you and your good works
I want to PM or Call you to know some info from your BOOK So Can I !? xD
Click to expand...
Click to collapse
My BOOK?
You can write me a PM, but normally I don't respond to tech support via PM
I have created this thread for requesting the devs for compiling cm7 ROM for our wave's device
As everybody knows that wave has very less ram and in jb and kitkat ROMs after installing several apps and gapps it lags like hell
so if anybody can build cm7 for waves it will be appreciated for devs it will not take much effort so please make it
Hm good idea..
But:
1. Source od Android 2.3.6?
2. Kernel (zImage)?
Bootloader and Fota we have.
A Early build You can find
AT this Forum its froyo
Sent from my GT-N7100 using XDA Free mobile app
ghoslslender124 said:
Hm good idea..
But:
1. Source od Android 2.3.6?
2. Kernel (zImage)?
Bootloader and Fota we have.
Click to expand...
Click to collapse
u can download official cm7 sources and there are many compress sources across 200 to 300 mb
u can compile it inlinux
karan1719 said:
u can download official cm7 sources and there are many compress sources across 200 to 300 mb
u can compile it inlinux
Click to expand...
Click to collapse
well i have knowledge in porting ROM, it would be easy to port bettwen i9000 and s8500, just edit kernel, keys, build.prop and some google codes.. but i dont have testdevice, i to brick phone is very easy with this
If you use badadroid as basis, you can't brick the phone since it do everything on virtual partitions...
But it need to adapt all the work oine by the badadroid team on a GB kernel
Maybe possible to use Oleg froyo sourrces, update to GB and backport all new things from badadroid (wave 2 compatibility,modem,wifi,gps...)
I think GB also work with 3.x kernel so there is nothing to worried cause jb and kitkat also uses same version of kernel
Now, this is interesting, given the amount of RAM we have nothing would run better than GB.
Hmm.. true story
Fidelator said:
Now, this is interesting, given the amount of RAM we have nothing would run better than GB.
Click to expand...
Click to collapse
I have one really wierd question that might piss off some badroid devs, and I am very sorry about that. But, why was kitkat ported to Wave and not JB ot GB? I mean, low RAM is really a bad problem and with GApps, the lag is a bit anoying.
TheBasterd said:
I have one really wierd question that might piss off some badroid devs, and I am very sorry about that. But, why was kitkat ported to Wave and not JB ot GB? I mean, low RAM is really a bad problem and with GApps, the lag is a bit anoying.
Click to expand...
Click to collapse
Jb has been ported to wave, (Android 4.1, 4.2 and 4.3) but are not updated (see old badadroid threads) (GPS is only on 4.4 i think, maybe on 4.3).
Also, ICS has been ported to wave 1 by mike (that's the beginning of Badadroid project), upgrading the GB kernel from Oleg, if i remember correclty (that's old). But in Mike ICS or Oleg GB, only wave 1 is supported, and there is no network.
kitkat is big joke from google
even wave2(ics) is faster than note2(kitkat)
google was saying at the time of release of kitkat that it is optimised for low ram device
but its very hard to find anything running official kitkat with less than 1 gb ram
BTW to my understanding virtual RAM partitions on solid storage are very likely to damage it if I'm not wrong.
And yeah, KKs main goal was to fix the nonsensical performance hit taken from the 4.3 update, IMO they could have done even better by trying to optimize it for even lower end hardware, such changes would be noted around the whole device lineup, still its noticeably better than 4.3 and pretty close to 4.2/4.1 levels
Fidelator said:
BTW to my understanding virtual RAM partitions on solid storage are very likely to damage it if I'm not wrong.
And yeah, KKs main goal was to fix the nonsensical performance hit taken from the 4.3 update, IMO they could have done even better by trying to optimize it for even lower end hardware, such changes would be noted around the whole device lineup, still its noticeably better than 4.3 and pretty close to 4.2/4.1 levels
Click to expand...
Click to collapse
BTW to my understanding virtual RAM partitions on solid storage are very likely to damage it if I'm not wrong.
Click to expand...
Click to collapse
WTF! Really? How so? Could you explain please?
TheBasterd said:
WTF! Really? How so? Could you explain please?
Click to expand...
Click to collapse
zRam doesn't damage nand or SD, but swap does.
zRam use real RAM and compress it, but swap create file on SD or Nand, and constantly write on it.
Flash memory have a limited write lifetime (like SSD), so, using swap is not good for flash memory.
Not dangerous, but it use it faster.
BenzoX said:
zRam doesn't damage nand or SD, but swap does.
zRam use real RAM and compress it, but swap create file on SD or Nand, and constantly write on it.
Flash memory have a limited write lifetime (like SSD), so, using swap is not good for flash memory.
Not dangerous, but it use it faster.
Click to expand...
Click to collapse
But, I did not make the swap file on SD card, but in the internal partition of bada, that is the bada_app or something like that. All I know is that it is in the internal memory, so if I use it, will it damage it ?
TheBasterd said:
But, I did not make the swap file on SD card, but in the internal partition of bada, that is the bada_app or something like that. All I know is that it is in the internal memory, so if I use it, will it damage it ?
Click to expand...
Click to collapse
It's flash memory, so yes.
TheBasterd said:
But, I did not make the swap file on SD card, but in the internal partition of bada, that is the bada_app or something like that. All I know is that it is in the internal memory, so if I use it, will it damage it ?
Click to expand...
Click to collapse
Yeah, as BenzoX said, use a microSD for the swap partition, if you kill the internal storage you'll probably be screwed.
BenzoX said:
It's flash memory, so yes.
Click to expand...
Click to collapse
Fidelator said:
Yeah, as BenzoX said, use a microSD for the swap partition, if you kill the internal storage you'll probably be screwed.
Click to expand...
Click to collapse
OK! So, thats the kind of sh!t you dont wanna do. Deleting it ASAP. Thanks for the info guys.
But, without that, the ROM is pretty slow.
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Hi eXperts,
last month I flashed the great Ultimate HD rom, so stable and now my wonderful Xperia pro is much faster
Before to do that anyway I used Mount2SD app to get my external sd mounted and solve, in this way,
common issue about "memory unavailable" and similars when I tried to add or update an app.
Now , Mount2SD is no more working, with no log entries, even if detailed debug verbose is enabled; first
I was thinking there is issue with Init.d support... But it sounds strange because before UHD I used the original stock rom by sony,
rooted of course, and furthermore I checked with a tool (embedded inside universal Init.d) and it shows me that Init.d support
is green and working....
So, looking beyond, my question is how to definitively solve this issue, changing kernel or something else
and give my phone support to mounting external sd native. Which kernel may I flash ? Working together with UHD?
Fast?
My phone is mk16i and must keep physical keyboard working, cwm, rooted.
Will this operation break my current configuration in terms of installed apps and so on?
My Xperia pro is unlocked bootloader.
Thank you very much in advance!!
Click to expand...
Click to collapse
XperiaPro55 said:
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Click to expand...
Click to collapse
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
XperiaPro55 said:
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
Click to expand...
Click to collapse
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Grof87 said:
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Click to expand...
Click to collapse
Hi Grof,
flashing stock GB/ICS does not help. I use stock kernel since the beginning... and no stock kernel
is able to mount sd-ext file system in order to use sd as a natural extension of internal memory.
As I wrote in the beginning I already reached out result I want, using Mount2Sd with stock kernel but now
I want to solve with a new full featured and modded kernel that embeds useful functionality just like CWM and
of course internal memory extension using sd-ext filesystem..
That's the point.
My sd card is perfect, nothing to complain and working like a charm! I "only" need the first part.
Regards
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Grof87 said:
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Click to expand...
Click to collapse
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
XperiaPro55 said:
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
Click to expand...
Click to collapse
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Grof87 said:
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Click to expand...
Click to collapse
Hi, I know the rules.
I am asking if you can help me understand which ROM is ready for UHD cause, of course, I already read the post and found
different suggestions but regarding other models. That's the point, because Xperia Pro is a particular phone with physical keyboard for e.g.
and also looking at different kernels inside its dedicated thread I was not able to understand which kernel is already developed
and patched on ICS and there is features matrix.
Finally I need to know if, installing selected kernel, I will loose something or not
I am not interested and I am not asking "which is the best rom for my phone ?"
Bye