vibrant black screen only - Vibrant Q&A, Help & Troubleshooting

I bought a vibrant last night. It was dead so i plugged it in my car charger and saw the boot screen and bought it. Well come to find out after the logs it goes to a black screen with the bottom buttons lighting up. I did try some research here but couldn't make any sense of it. Is there any way to tell what is wrong with it and how to fix it? I am a newb so please be patient with me. Thanks.

How about looking here, here and maybe here (?).

Related

dead screen on my new 101?

I just brought my new archos 101 home from the post office. Turned it on, set it up and then the LCD crapped out.
It is displaying like 8 colours and is really dark.
The TV Out seems to work ok via the HMDI cable but the actual LCD is like the display driver didn't load or something (reminds me of what used to happen when you put a new video card in windows 98).
Anyone who has an archos seen this? Please tell me it's not DOA because I will likely kill someone.
Since the forums think I am spamming because I am trying to post a link you will have to copy/paste.
mcmonkey.net/img/misc/archos_screen.jpg
never heared about that before.
but it looks like inverted. ( donĀ“t know the right word)
can be driver. have you tried a reset? >press power button for 10 seconds<
hope this helps.
greets
Looks pretty dead to me. Like squirlier said... reboot.
If the splash screen is the same as the screenshot, then (I reckon) you can be pretty sure it's dead. If it's not but it dies again while inside android, you could try flash the firmware again.
Never come across anything like this before though, so I am only working of guesses.
The splash screen is all white background with black text and a blue "your".
Will try the reboot when I get home from work in the morning.
Not looking forward to sending it back since I only just got it.
Did a reboot, no luck. Still the same problem as before.
Guess it is time to contact archos.
Looks like a loose connection to me. But I wouldn't recommend voiding your warranty to crack it open and check it out. Better to send it back.
Well it's officially dead.
Sent an email to archos and they have responded by telling me to ship it back to them.

[Q] VZW TP touch screen not working

so, i just got this phone about a week ago, and its already seen several near death experiences with all the flashing ive been doing. but this one takes the cake. all i did was put the phone in my back pocket, with the screen facing in, sat down for half a second, and when i took it out, the screen had been pressed so hard that the top layer of the resistive screen was stuck to the bottm, and not registering anything. i knew the first step to fixing it was getting it unstuck. but it still wounldnt work. did a hard reset. and now im stuck at my initial tap screen to set up phone screen, and i cant do anything. this is clearly a hardware problem. can anyone help me out?
lemme be the first to say it man, ouch lol
sorry about your screen, i fear the only way to fix would be to find another screen assembly, if you search the threads for the cdma raphael(herman) i beleive there is a detailed teardown of the phone that may or may not help you resolve your problem. here is a quick link to something along the lines of what your looking for but not really too detailed : http://www.ifixit.com/Teardown/HTC-Touch-Pro/787/1
ive done that, but usually break the screen completely. i have an extra us cellular tp that has a bad keyboard and front panel buttons but screen and touch works. i just use it as a extra battery charger. has some scratches, but works. ill send it to you if you send me your old one. the screen has a double-stick tape that holds it to the frame around the edges. let me know if your able to tear it down and think you can put it back together again. its a pretty straight forward process though.
Apply packing tape to the screen and pull as hard as you can.

[Q] Help Please With My Screen :( i9100

Hi,
I dropped my Galaxy S2 Yesterday (have no idea if this relates to it) But i plugged it into the charger this morning and everything was blue & some of the screen had turned black and some icons had burnt into the screen it looked like.
After taking it with me because it was still usable, Its not completely black except for maybe the faintest part of blue.
Im running Lite'ning rom, The newest one im pretty sure.
Just wondering if this is a virus? Or the screen is dead. I just cant see how it could suddenly die when it was flat and not turned on.
Phones not under warranty by the way. So maybe you could give me some options?
Thanks heaps guys
Probably the problem is hardware related due to the fall, but you could back all your data and try to do a factory reset to see if it fixes or not. If it doesn't fix maybe you should check your screen hardware.
Thanks for the reply,
I just reflashed Litening with Odin 1.85 and still nothing, I get the vibrations, touch lights, sound ect, But only occasionally a tiny little strip of blue along the top.
How would i check my screen hardware? Because i pulled apart my galaxy s after it died and accidently cracked the screen & Glass
How would i do a factory reset by the way? Since i cant see anything
I'd imagine it's dead. I'd take it to your local store and ask for an estimate on how much it would cost to fix it. If you can't see anything, then the screen is either broken or it got disconnected (or maybe some of the ribbons did at least).
Yeah, I just dont really wanna take the phone apart unless i know its likley to fix it.
When i first got it, I noticed it had black splotches on the screen in very dim light on a white background. Nd im guessing id have to almost buy a whole front screen assembly to replace the front screen D:.
Would i be better just to sell the phone how it is? Or repair it?

[Q] Black screen

Hello, please help!
I have my phone without power when I watch an online channel, and after that I put it on charge. After a couple of hours, I have openit and I have a "pixel multicolor screen".
The phone can connect with pc but don;t move foward, and I relock it and after that I do a RUU_signed.exe update, where I get "error[131]:costumer id error
Now the screen is black/blank. I can feel the startup vibration but the screen is not turning on.
It;s there something to try before trow it? Thanks in advance for any ideea!
Comments Withdrawn
zcink said:
I hate to say this and I hope I am wrong, but sounds like from the way you describe it that your screen has overheated and actually burned out.
Can you get anything to light up? HTC splash screen? No?
Is it under warranty?
Click to expand...
Click to collapse
nothing on the screen. do you think it's the screen or the mainboard? because I can see the buttons light and backlight and vibration when I power it up, but the screen is black allways. If I change the screen can I make it work?
no warranty, because it's bought from france and I am not living there.
Thank you so much for your help!
Comments Withdrawn
robertaccess said:
nothing on the screen. do you think it's the screen or the mainboard? because I can see the buttons light and backlight and vibration when I power it up, but the screen is black allways. If I change the screen can I make it work?
no warranty, because it's bought from france and I am not living there.
Thank you so much for your help!
Click to expand...
Click to collapse
If you have any experience with taking phones apart, try to reconnect the display connector.
It could be something as simple as that.
However, if that doesn't work, it probably is the screen.
As Zcink said, it may not be worth repairing since it's going to add up to the price of a new phone.

[Q] screen replacement

I hard bricked my note a month ago so I decided to buy one off of Craigslist that was working and all I had to do was replace the screen. I had an AT&T phone so I made sure I purchased the same model. I took the broken screen out of the phone and replaced it. No broken cables everthing secure but when I turn on the phone the screen is crazydark! I checked the cables and I dont see anything wrong. Help please what went awry?!
Any pictures? How dark?
Ill post them n a sec, very dark can barely see the bottom apps on screen. I know the screen worked because it was from my other galaxy note.
I took phone apart and put back together I did notice that when I hit the back button the very top of the screen is visible. Now however I cant see anything on the screen.
pics of screen
trayluv73 said:
Ill post them n a sec, very dark can barely see the bottom apps on screen. I know the screen worked because it was from my other galaxy note.
Click to expand...
Click to collapse
the screen is turned up to the max!
Where you able to solve it ? My Galaxy Note N7000 looks like it has quite a similar problem and I'm quite sure, that it's not caused by defect hardware.
In the case that your still looking after a solution, i have posted my problem here.

Categories

Resources