Related
Hello,
So, I received my Prime on 2/8/12 and I absolutely adore it. However, I have noticed that on the right side of my screen near the bottom, the very edges seem to be able to be depressed just slightly. The best word I can come up with is Spongy. If I press quickly I can hear where the case and the screen come together and click softly. There is no Creaking or anything.
Is this a known defect or is it just a soft spot on the case and there is nothing to worry about? So far I have not received a straight answer on it. It certainly doesn't effect anything. I have decent wifi connectivity in an old Cement Style Apartment and the screen is perfect. I walked in knowing the GPS wasn't going to work and had very little worry or interest in GPS in a tablet.
Thanks for your help!
Miles
I know exactly what you're saying...but I'm almost 100% sure that there's no issue here. It just happens to be a place where there's no clip to fully secure it and it doesn't come together exactly in that location, but it's not going to cause an issue.
That is what I was assuming as well. I wanted to make sure. I am so happy with this tablet thus far, I just wanted to make sure I wasn't looking at a defect. Takes a huge load off my mind and my wife's as well. For as much as we paid for it I would hate to see something small be the cause of some major flaw.
Thank you so much!
Hmm, It seems I have a Spongy spot on all sides of my tablet. Right side on the bottom (near where you would hold it in Landscape), On the top near the camera (I can actually feel alot of give here and hear the case clack against it when I even just hold it in Portrait mode), Just below the volume rocker and another beside the Power adapter area.
Sadly I am starting to think this isn't exactly normal. Am I the only one thinking it might be time to head back to office depot?
MilesAeon said:
Hmm, It seems I have a Spongy spot on all sides of my tablet. Right side on the bottom (near where you would hold it in Landscape), On the top near the camera (I can actually feel alot of give here and hear the case clack against it when I even just hold it in Portrait mode), Just below the volume rocker and another beside the Power adapter area.
Sadly I am starting to think this isn't exactly normal. Am I the only one thinking it might be time to head back to office depot?
Click to expand...
Click to collapse
After reading this, I checked the spot by the camera, and I have that too. You really shouldn't worry about it though...they're WAY within tolerances for devices of this kind...I mean, it moves like what, 0.001mm?
My first one was the same way as it the one I just got as a replacement (I sent the first one in for an unrelated problem). I wouldn't worry too much about it.
So everyone says not to worry. I am really glad to hear that More people are having this problem than just myself. Yes it is a very slight movement, however, I was worried about it hindering the screen. I called office depot today and they said they would refund me if I wished. I think I will probably call off the refund. It is an amazing tablet and I love it to death. Hopefully nothing worse comes of it as time goes on.
I have a lot of thinking to do I suppose. I kind of feel like if I take the refund I am going to have to take a step backwards, due to the loss of the quad core. Though, between my wifes Dual core and my quad core I see very little difference between the two.
Hi all, I found a defect on my Lumia 920's unibody casing. the top bezel is somewhat loose and it squeaks when the phone is cold and clicks when the phone is warm. I find it very annoying because I like to grab the phone from the top and bottom. here's a video of what I'm talking about:
http://www.youtube.com/watch?v=Vevk0LIlLPo
I already replaced my phone at my Rogers store... you might want to check yours and replace if necessary. I feel the clicking will get ALOT worse in the summer when the weather is hot.
HTCalltheway said:
Hi all, I found a defect on my Lumia 920's unibody casing. the top bezel is somewhat loose and it squeaks when the phone is cold and clicks when the phone is warm.
Click to expand...
Click to collapse
funny you mentioned this, i only just noticed the exact same thing about a week ago....
I had a similar issue with the unibody also.
It make noises when I press between the power and camera button.
I took the phone back to the Nokia Care and after more than a week I went there to have him back but it had the same issue. So I give it back one more time and I'm still waiting....
faeredia said:
funny you mentioned this, i only just noticed the exact same thing about a week ago....
Click to expand...
Click to collapse
digipix said:
I had a similar issue with the unibody also.
It make noises when I press between the power and camera button.
I took the phone back to the Nokia Care and after more than a week I went there to have him back but it had the same issue. So I give it back one more time and I'm still waiting....
Click to expand...
Click to collapse
do you guys all have the black version? I've heard that apparently different colored unibodies also have different stiffness...
also when did you guys buy your phones? build week?
I'm planning on getting a yellow unibody to switch out my black one.. but first I have to guarantee the yellow shell won't make those noises...
thanks for the replies!
I have a very slight click near the top of the phone (but not constantly) and that's it. I have the white version. I won't bother changing it because until I read this thread I can't say I even noticed it.
I got a black one on launch and its quiet. No creaks, squeaks or clicks.
Sent from my RM-820_nam_att_100 using Board Express
I have this effect at right side at the middle and at the top. Won't bother with replacements until it will be getting worse/other defects will appear.
To me it is a minor thing. Also no warranty that new one won't start to click after time.
If you put it in a protector like one should with a 600 dollar phone you won't ever even notice this issue. Plus other than an annoyance it has no affect on the phones function.
mine too
I have a black hong kong version. There's a creak/squeak at the middle left (no button) side. which is little disappointing to me when it's the most expensive phone I bought and build quality was very well reviewed.
Mine does this if I press in the middle of the bottom half of the back. Strange thing is it doesn't always do it, seems a fairly random issue.
Super Chimp said:
Mine does this if I press in the middle of the bottom half of the back. Strange thing is it doesn't always do it, seems a fairly random issue.
Click to expand...
Click to collapse
my old one does different things in different temperature. In freezing temp it's quiet, in room temp it squeaks, after gaming it clicks.
Solarenemy68 said:
If you put it in a protector like one should with a 600 dollar phone you won't ever even notice this issue. Plus other than an annoyance it has no affect on the phones function.
Click to expand...
Click to collapse
Cases and all other protection equipment are extremely annoying, and pretty stupid, too.
Super Chimp said:
Mine does this if I press in the middle of the bottom half of the back. Strange thing is it doesn't always do it, seems a fairly random issue.
Click to expand...
Click to collapse
You know what they say if it does it only when you press on it?:laugh:
HTCalltheway said:
do you guys all have the black version? I've heard that apparently different colored unibodies also have different stiffness...
also when did you guys buy your phones? build week?
I'm planning on getting a yellow unibody to switch out my black one.. but first I have to guarantee the yellow shell won't make those noises...
thanks for the replies!
Click to expand...
Click to collapse
Hello,
I have the yellow version from November last year and I didn't encountered any problem with my phone; I saw a lot of users that have problems and some strange of them but I haven't.
Regards!
Sent from my Lumia 920 using XDA Windows Phone Premium App
I have a red Lumia 920 and I am on my 4th unit because each previous phone has had creaking issues on the body. Now, these haven't been the only issues I have suffered but the others are irrelevant to this thread. It does annoy me. I cringe whenever I picked up the previous phones because of the creaking it would make. It makes the phone feel cheap, and quite frankly it shouldn't and thankfully Nokia agree.
I have had my current phone for a day now and so far no problems have developed so I am hoping for the best.
mine was fine until I dropped it twice in the same day (within about 10 minutes of each other) once on concrete, then for some reason decided to drop it again and it bounced off 3 different objects, since then you can hear a 'click' if I press down on the top of the phone in the centre near the front.
bit miffed as I have a scuffed corner now on an otherwise mint phone, have had it for a good few months tho so the novelty of how shiny and nice it looks has almost worn off
I have the white one, a friend of mine has the black one and has no issues with creaking/clicking on the case, but then he has had a silicon case for it since the day he had it, maybe that's helped?
Well, I have had the phone for 5 days and the squeaking/clicking appeared yesterday. I realized that a part of the body feels "hollow" inside so I proceed to disassembly the unit.
When I take out the cover noticed that in fact there was empty space between the case and the board. I put in some supplement (I had to try with several ones until I found the piece that let me close the phone with no extra effort or excessive pressure). Once I get it right, put the parts toghether again and the squeaking/clicking was gone. Also it doesn't feel hollow like before.
I think is a problem with the material expanding and contracting under different temperatures and because it doesn't have a true anchor to the sides (it goes in and out very easy, no extra seals on the sides). Pretty nasty thing for a High-End device.
PS: My carrier (where I bought the phone) said that it was "normal" and refused to replace the unit. Normal my ass!
Aside from that I'm very much inlove with the 920 and WP8.
Ren7on said:
Well, I have had the phone for 5 days and the squeaking/clicking appeared yesterday. I realized that a part of the body feels "hollow" inside so I proceed to disassembly the unit.
When I take out the cover noticed that in fact there was empty space between the case and the board. I put in some supplement (I had to try with several ones until I found the piece that let me close the phone with no extra effort or excessive pressure). Once I get it right, put the parts toghether again and the squeaking/clicking was gone. Also it doesn't feel hollow like before.
I think is a problem with the material expanding and contracting under different temperatures and because it doesn't have a true anchor to the sides (it goes in and out very easy, no extra seals on the sides). Pretty nasty thing for a High-End device.
PS: My carrier (where I bought the phone) said that it was "normal" and refused to replace the unit. Normal my ass!
Aside from that I'm very much inlove with the 920 and WP8.
Click to expand...
Click to collapse
I hope your supplement is a material that does not generate static electricity. Otherwise your fix may damage the phone beyond repair. Things like paper, cardboard, plastics like bag material that is not treated, cloth, and many others all generate static when in contact with other non conductors like the inside of the phone body. Just a warning from an RMA tech who has seen ESD damage from bad fixes and the customer stuck with a voided warranty.
Solarenemy68 said:
I hope your supplement is a material that does not generate static electricity. Otherwise your fix may damage the phone beyond repair. Things like paper, cardboard, plastics like bag material that is not treated, cloth, and many others all generate static when in contact with other non conductors like the inside of the phone body. Just a warning from an RMA tech who has seen ESD damage from bad fixes and the customer stuck with a voided warranty.
Click to expand...
Click to collapse
Yeah, it was non-conductive material. I sort of a tech guy so I know a little about that. I used something that I commonly use as aislant and vibration cancelling in my PC mods. But thanks very much for the warning anyway. :good:
Following the case, after keep ranting about that flaw with my carrier (and phone vendor) I'm with my second unit now, also yellow. I noticed that the power/lock button is lower that the volume and camera buttons but its not a problem (it is lower compared with the firt unit, if this one was my first surely I was going to think that this was the original design).
I've been looking like a paranoid squizo for other defects but so far, so good.
Pretty lame for a high-end phone and a WP8 flagship. Even if its just a batch. Still,, I freaking love the OS.
Hello everyone!
Today I just received a brand new Moto E in the mail to replace my old tiny starter smartphone. Almost instantaneously after I began to use it, I noticed a small problem. Whenever I press on the screen, even only with a small bit of force, I notice some gentle ripples coming from both the left and right sides of the screen. If I barely tap the screen, it doesn't happen, but I have to press unusually light for it not to occur. Also, it's really only noticeable on dark colors.
I am on Straight Talk, and I bought the phone off eBay. The seller doesn't offer returns, and the Straight Talk warranty is a total joke. Even trying to call to ask Straight Talk about it wouldn't be worth it.
I guess what I am really asking is, is this normal for the Moto E? I know I read somewhere that gorilla glass flexes more than regular screens, opening the way for slight rippling.
Also, what would y'all do if this happened with your handset?
TikPandora said:
Hello everyone!
Today I just received a brand new Moto E in the mail to replace my old tiny starter smartphone. Almost instantaneously after I began to use it, I noticed a small problem. Whenever I press on the screen, even only with a small bit of force, I notice some gentle ripples coming from both the left and right sides of the screen. If I barely tap the screen, it doesn't happen, but I have to press unusually light for it not to occur. Also, it's really only noticeable on dark colors.
I am on Straight Talk, and I bought the phone off eBay. The seller doesn't offer returns, and the Straight Talk warranty is a total joke. Even trying to call to ask Straight Talk about it wouldn't be worth it.
I guess what I am really asking is, is this normal for the Moto E? I know I read somewhere that gorilla glass flexes more than regular screens, opening the way for slight rippling.
Also, what would y'all do if this happened with your handset?
Click to expand...
Click to collapse
No, maybe your phone has something wrong with touch, unfortunately... I have already get press the screen and nothing like what you described had happen. Try to search videos about the resistance from Gorilla Glass in Moto E, or try another one in a Motorola Store in one Shopping, this way you could see for yourself. :good:
Let me start by saying that i bought this phone only 3 days ago and these are the problems I've found with it.
1. The Second screen back light issue. This is a common problem among many lg v10 users as i have noticed, and i have that same problem too. to the extreme left of the second display it is brighter than the rest but only when it is off. I do not find this very annoying since i do not use the second display for reading my notifications while it is off. i mostly use it when the screen is on
2. In addition to that, the power button/ fingerprint scanner combo is completely garbage, as in the actual clicking. the button seems loose and when i click it, it squeaks. Also, when i run my finger up and down the power button it wobbles and has the same annoying squeak.
3. The charging port is loose. Not so much that the cable could slide out not in that axis, but it moves side to side freely and up and down. this worries me because i think that if i put too much pressure on the cable the port could break somehow.
4. The steel bezels are nice and stuff but the gaps, are uneven at the bottom left, the metal bezel is like bent and you can easily see through it. also at the back when you pop in the cover it seems like it doesn't align with the bezel. but that might just be my ocd lol
This phone in my opinion is great the best phone I've had. but its just that these things are what let me down. This phone is great but they absolutely ruined it with the quality control. note* my batch is from January 15, 2016
U probably just got a bad one. Sometimes, they make it thru the quality control somehow. I would return it until u get the one ur satisfied with.
Sent from my LG-H901 using Tapatalk
youngpettyboi said:
U probably just got a bad one. Sometimes, they make it thru the quality control somehow. I would return it until u get the one ur satisfied with.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Yeah I think I should but I'll wait until the weekend and decide if I should change it.
Probably a good idea. The flaws won't change. I have the lightbleed on the 2nd screen, but I never notice unless it's absolutely pitch black where I am and the screen is off. It doesn't annoy me tho.
Sent from my LG-H901 using Tapatalk
YMartin said:
This phone in my opinion is great the best phone I've had. but its just that these things are what let me down. This phone is great but they absolutely ruined it with the quality control. note* my batch is from January 15, 2016
Click to expand...
Click to collapse
I like the phone, maybe I love it. I have the same problem with the residual light on the left of second screen. (phone batch 26 Oct.2015) But, what I dislike the most:
1. The lack of a LED on the front.
2. The second screen, about my opinion is useless until then a developer create an xposed apk for a flashing light on second screen when I loose a call.
3. The fingerprint sensor is useless too for me.
4. Volume of the speaker is not too loud.
But, I like the size and the shape of the phone. It is a catch eyes everywhere I go. Benchmarks are very good for a Snapdragon 808. The screen is very fluid. And the most, the camera and his software are great; you believe or not I compared in photoshop pictures from an expensive Sony semiprofessional DSLR camera with photos made with my V10 and the overall quality are quite the same. It's the best phone I ever had (and I had a lot of top level androids)
I don't want to change it, even on a G5!
H961 dual SIM, rooted, debloated.
The light bleed is a common issue, but everything else sounds like your phone was assembled incorrectly, you should exchange it
Okay so today I was wondering if I could find any more nit picky problems and noticed that the back cover did not sit flush with the buttons and that if I pushed it down it became flushnot a big issue but it bugs me when I'm turning up the volume or turning on the phone
thisisjason said:
The light bleed is a common issue, but everything else sounds like your phone was assembled incorrectly, you should exchange it
Click to expand...
Click to collapse
Well I exchanged a week ago and now that the time limit to return it is over, it cracked, not from a drop. It just cracked by itself there is a small hair line crack right by the metal rail and if is so annoying I paid good money and I take care of my phones well even if this was made to be tough. It cracked while I was in the car waiting for someone and then out of no where I heard a little pop and I thought nothing about it but after I finished watching the video I noticed it and got so scared I was like"did I drop it" but I did not idk how it managed to break I haven't dropped my phone yet and it just cracked out of nowhere
Here's a light review of the phone from Clove:
https://www.youtube.com/watch?v=mbFeUoVyT9Q&feature=youtu.be
Preorders up today as well.
Unboxing vid. Looks like they went with a nicer packaging this time.
VS. an iPhone 6 vid
VS. the Z5 Compact vid
i have bought yesterday the white x compact. unfortunately its a bit larger than the z3c. well im a bit disappointed but not because of the sd 650. the performance is quite good. its definately responsive and quick for a compact. but the bezel on the bottom is bigger than at the top. looks like a design fail. vibration motor is veeery strange imo. at start you dont feel him when typing but the faster you type the more the motor is vibrating. this behavior is very hard to accept. maybe for some people a minor thing but for me when i got used to my z3c this not ok. the whole left side beside the display has a gap between display and frame. on the right side there is no gap. dust and dirt wil again find a nice place there. this was the reason why i have replaced my white z3c with a black one after the motherboard was dead on the white one. it seems sony has not learned from their mistakes. fingerprint button has also gaps and looks like a bit deplaced but works very well. on the back side there you have gaps on top and bottom. i really do not understand sony. this phone costs 450€ and it seems they have no QA before packaging. camerawise i can see some improvements. focus is much faster than z3c. but the camera quality nowhere comparable to a galaxy s7. its ok but not that i would say wow. front cam is better than z3c. no softskin blur effect more but when it gets dark the front cam is not very good. generally i was expecting more from sonys camera system.
the best thing at this phone is the display. the black values and color reproduction is very good. looks like amoled but is probably a very good ips. but i think its displaying to much red. adjusting whitebalance helps. generally much better than z3c. due to the 2D glass curves it seems that display is almost printed regardless the 720p.
but there is also somehting that is causing me headache with the display. it seems that due to the curved glas the letter "P" is sometimes not very responsive. especially if you are trying to hit the letter from the right side throught the curved area of the display. from top no prob but from the side its sometimes not reacting. tested with google keyboard.
loudspeakers are a bit louder probably due to the lack of water resistance. they sound better.
the phone goes back as i have got massively used to have root. i'm still on kitkat with root and xposed and several changes through xposed. loosing all this to a non perfect phone makes no sense for 450€.
the biggest problem is that there are no smartphones at 4,6inch with good quality anymore. i was even thinking about iphone but no thanks. i dont want to be a slave of itunes and pay more than 750€ for a phone. SE is too small. z5c is overheating, bulky & too rectangle. A3 2016 is 4,7inch and therefor longer. could be ok. BUT it has no fuc*** notification LED. major fail by samsung as this is inacceptable in 2016. but generally the build quality by samsung has raised. the galaxy s7 in a size of 4,6inch would be perfect. im remembering the times with my galaxy s1. fantastic phone and it was undestroyable. well if you have any questions you can ask me until i have still the phone. currently im thinking of testing an s7. but i hate to to do strange things with my thumb just to be able to reach the back button on the bottom of the phone. the s4 mini was perfect size.
So you are returning the phone?
I will give this phone a try but your build quality comments concern me. I should have it this week, so I'm hoping I get a good one. Does the plastic, glossy shell feel as cheap as it looks?
True, it's sad that these phones are the only game in the 4.6" size. I kinda don't consider the 4.6" iPhone in this size class because its just as big as a 5" screen phone because of the home button. I'm hoping Samsung comes out with an S7 mini which I would get in a heartbeat.
uchosen said:
So you are returning the phone?
I will give this phone a try but your build quality comments concern me. I should have it this week, so I'm hoping I get a good one. Does the plastic, glossy shell feel as cheap as it looks?
True, it's sad that these phones are the only game in the 4.6" size. I kinda don't consider the 4.6" iPhone in this size class because its just as big as a 5" screen phone because of the home button. I'm hoping Samsung comes out with an S7 mini which I would get in a heartbeat.
Click to expand...
Click to collapse
try it. the plastic glossy shell is not the problem. its nice to look at, looks a bit like ceramic and not so slippery as i thought but the build quality is again not the best. i hate the unsymetric gaps between frame. they just cant place the display equally into the frame. on the black (which is not true black, its more dark blue) you wont see them so much as on the white one.
i was hoping for a s7mini but it seems that samsung has changed the mini series into the A3 line which is really sad unfortunately in the stores theres always the anti thief thing on the back which prevents to get true feeling of the normal S7. i need to test if a S7 would somehow be operational with one hand for me. but i dont think so. :/
the display of my z3c is peeling of on the top left edge which was the reason iw as looking for a different phone. i need to repair this. sony would need to much time for this.
x10isrooted said:
..vibration motor is veeery strange imo. at start you dont feel him when typing but the faster you type the more the motor is vibrating. this behavior is very hard to accept...
Click to expand...
Click to collapse
i didn't realize that with swift key. but you are right. if you set to system vibration you have that issue. but me, i am using swift key where you can set you individual vibration duration and that works like a charm.
x10isrooted said:
the whole left side beside the display has a gap between display and frame. on the right side there is no gap...
fingerprint button has also gaps and looks like a bit deplaced...
Click to expand...
Click to collapse
on my xxc the gaps are all the same size and nothing is deplaced.
x10isrooted said:
..but there is also somehting that is causing me headache with the display. it seems that due to the curved glas the letter "P" is sometimes not very responsive. especially if you are trying to hit the letter from the right side throught the curved area of the display. from top no prob but from the side its sometimes not reacting. tested with google keyboard.
Click to expand...
Click to collapse
can't confirm that too.
the 'p' works just fine. (swift key)
x10isrooted said:
the phone goes back as i have got massively used to have root. i'm still on kitkat with root and xposed and several changes through xposed. loosing all this to a non perfect phone makes no sense for 450€.
Click to expand...
Click to collapse
i hope, root is just a question of time. i hope very soon. can't wait for it to make all my customisations i am used to.
i found a way posted here but its written so weird. i dont know if its reliable.
http://www.sadroid.com/root-sony-xperia-x-compact-5-minutes/
the individual vibration is the same. the often and quicker you are pressing a button the more the motor of the vibrator gets crazy. sound like a bee on Speed.
You must try to press the letter p probably from the right side. a bit through the curved glass. the galaxy s7 and z3 compact touchscreen is much more responsive and sensitive. for me it was often not reacting when i was not thinking to touch more precisely in the middle of the letter P. maybe a defect on my device but i think the whole touchscreen production will be affected by this. i have tested the Xperia X and it has the same behavior. i will have to test another device in store if this is the case there as well.
this website is untrusted. dont download anything from that. you will get a virus. nothing else. when a root is availbale someone will for sure post it here first. but i doubt that it will be soon. x compact has not the best specs. all the famous and talented devs have other phones currently. xxz0o was the person that developed a root for z3c after half a year i think.
ok. now i found the issue with the vibration. your duration seems to be set pretty long. i set it to 35ms and that works absolutely fine. but if you set it to f.e. 60ms you have that issue. but why would you like to have it that long?
i mean its obvious that it can be a prob. if your next press is in the range of the 60ms there is no other way for the phone to vibrate permanently. are other phones adjusting the vibration if you press faster than the setted duration?
but i am a slow writer. maybe i will never understand that problem. i just found that issue while pressing complete randomly on the keyboard. i could never write that fast.
jeah, as i thaught. the page is very weird. i would also only try a root from a page i know pretty good.
ohh. half a year? thats sad. but hope never dies.
i like the phone. maybe there are some others
x10isrooted said:
try it. the plastic glossy shell is not the problem. its nice to look at, looks a bit like ceramic and not so slippery as i thought but the build quality is again not the best. i hate the unsymetric gaps between frame. they just cant place the display equally into the frame. on the black (which is not true black, its more dark blue) you wont see them so much as on the white one.
i was hoping for a s7mini but it seems that samsung has changed the mini series into the A3 line which is really sad unfortunately in the stores theres always the anti thief thing on the back which prevents to get true feeling of the normal S7. i need to test if a S7 would somehow be operational with one hand for me. but i dont think so. :/
the display of my z3c is peeling of on the top left edge which was the reason iw as looking for a different phone. i need to repair this. sony would need to much time for this.
Click to expand...
Click to collapse
The S7 mini would be perfect, but it will never be created. The S7 is about the same size as the iPhone 6, so if any of your friends have one, just try using it and you'll quickly realize how much harder it is to reach the top of the phone with your thumb. I'm sticking with my Z3C for another year to see if anyone (not just Sony) releases a 4.5-4.7" flagship device. The XC just doesn't meet my expectations for an "upgrade".
Phone Arena review:
http://www.phonearena.com/reviews/Sony-Xperia-X-Compact-Review_id4256
The AndroidCentral Review is up, one note the lack of a fingerprint scanner is US only, the rest of the world has the fingerprint scanner available!
http://m.androidcentral.com/sony-xperia-x-compact
All of these first reviews to be released seem to be very shallow in depth. They don't go into any real analysis of the phone and use very general statements to describe the user experience. In fact, these read more like unboxings than actual reviews. There's a lot of talk about what the phone looks like, the specs it comes with, and way too much of it sounds like they're reading a press release. If I was in the market for a new device. I'd wait another month for real reviews to be released.
Android Authority review:
https://www.youtube.com/watch?v=uullDQFq5W0
I sure do not have those build quality issues. gaps?! display is dead flush, heck everything is. I am very impressed with the build quality, very sturdy. I do not have trouble with coming in from the right and typing 'p' either, but if you display is not flush it would probably influence it. I am more than sure you were unlucky and got a bad apple (heh). as for the key vibration issue; if you type faster than the vibration delay is set, you are of cause going to have it vibrate all the time while typing, odd btw that you guys was set to 60ms mine was set to 25ms as default.
Hey everyone, just wanted some feedback regarding an issue I began having this week with my X Compact.
Issue: The phone is not as responsive during the unlocking process as it once was. I used to simply swipe to unlock and the phone would immediately unlock with a simple swiping motion. Now, the phone requires a harder swipe before it unlocks.
Any ideas?