<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
Click to expand...
Click to collapse
it wont go further....
what is wrong?
i'm using odin 1.75
mrprince123 said:
it wont go further....
what is wrong?
i'm using odin 1.75
Click to expand...
Click to collapse
More details please
Bleh
mrprince123 said:
it wont go further....
what is wrong?
i'm using odin 1.75
Click to expand...
Click to collapse
Try with latest Odin. 1.85 i think. Also, before you try, unistall the phone from the PC and be sure that you have the correct drivers installed. Another suggestion is to try a different USB port.
If you phone boots, you can try Mobile Odin, its on the Play Store. No so sure about this one because i have never used it, but i guess you could give it a shot.
Start Odin with "Run as administrator" privileges.
Miami_Son said:
Start Odin with "Run as administrator" privileges.
Click to expand...
Click to collapse
thanks,
i'm using windows xp, and Odin3-v1.85, and SGH-I777_ClockworkMod-Recovery_5.0.2.3,
I'm assuming that: SGH-I777_ClockworkMod-Recovery_5.0.2.3 might not be the right one.
I'm new to Andriod phone btw.. :victory:
update:
my phone is now,,,saying:
Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again...
Click to expand...
Click to collapse
what should I do now?
mrprince123 said:
thanks,
i'm using windows xp, and Odin3-v1.85, and SGH-I777_ClockworkMod-Recovery_5.0.2.3,
I'm assuming that: SGH-I777_ClockworkMod-Recovery_5.0.2.3 might not be the right one.
I'm new to Andriod phone btw.. :victory:
update:
my phone is now,,,saying:
what should I do now?
Click to expand...
Click to collapse
You should not be bothering with ClockworkMod Recovery at all if you are flashing with Odin.
Recovery is built into the kernel.
Do all suggested above and also make sure you have a good usb cable. Cables do go bad.
BTW...what are you trying to flash?
mattern1974 said:
You should not be bothering with ClockworkMod Recovery at all if you are flashing with Odin.
Recovery is built into the kernel.
Do all suggested above and also make sure you have a good usb cable. Cables do go bad.
BTW...what are you trying to flash?
Click to expand...
Click to collapse
thanks for your great reply
I was trying to follow this thread:
http://forum.xda-developers.com/showthread.php?t=1574718
AOKP Jellybean Build 10.22.2012 ,
and, it says it needs a CWM Recover,,,
so i downloaded Odin 1.85 and CWM 5.x.x.x.tar
and now,,, it stuck on the Zimage part...
and my phone says "firmware corrupted."
:crying:
i also tried,
2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows)
from this thread:http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
it didnot work
mrprince123 said:
thanks for your great reply
I was trying to follow this thread:
http://forum.xda-developers.com/showthread.php?t=1574718
AOKP Jellybean Build 10.22.2012 ,
and, it says it needs a CWM Recover,,,
so i downloaded Odin 1.85 and CWM 5.x.x.x.tar
and now,,, it stuck on the Zimage part...
and my phone says "firmware corrupted."
:crying:
i also tried,
2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows)
from this thread:http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
it didnot work
Click to expand...
Click to collapse
What were you running before you decided to flash this? Stock Gingerbread? Stock ICS? Were you rooted before or are you now attempting to gain root? If rooted, were you running a custom GB rom or an ICS one? Answers to these will help determine how best you can be helped.
mrprince123 said:
thanks for your great reply
I was trying to follow this thread:
http://forum.xda-developers.com/showthread.php?t=1574718
AOKP Jellybean Build 10.22.2012 ,
and, it says it needs a CWM Recover,,,
so i downloaded Odin 1.85 and CWM 5.x.x.x.tar
and now,,, it stuck on the Zimage part...
and my phone says "firmware corrupted."
:crying:
i also tried,
2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows)
from this thread:http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
it didnot work
Click to expand...
Click to collapse
It seems you need to Odin flash a rom with a kernel that includes CWM recovery.
You are new here so the first place to go are the stickies like here: http://forum.xda-developers.com/showthread.php?t=1301682
Work from there and READ, READ, READ!!! Learn what you need because there is a huge amount of "old timers" here that will not spoon feed you any information.
It has been so long since I had to root my phone from stock and load a kernel with CWM recovery. I will try my best to help but will be pretty busy tonight. There may be additional knowledgeable people helping you in the meantime.
Good luck!!
Edit: Firmware corrupted may be an incomplete download. Try downloading the file again. BTW: Don't bother trying to Odin flash CWM recovery....it is built into custom kernels.
mattern1974 said:
It seems you need to Odin flash a rom with a kernel that includes CWM recovery.
You are new here so the first place to go are the stickies like here: http://forum.xda-developers.com/showthread.php?t=1301682
Work from there and READ, READ, READ!!! Learn what you need because there is a huge amount of "old timers" here that will not spoon feed you any information.
It has been so long since I had to root my phone from stock and load a kernel with CWM recovery. I will try my best to help but will be pretty busy tonight. There may be additional knowledgeable people helping you in the meantime.
Good luck!!
Click to expand...
Click to collapse
thanks
so,
what I did was, i used Kies to emergency reset/initialization for the phone
then, i used Odin 1.85 + Siyah-v3.4.2-nomswap-I777
somehow, my phone is rooted.
then, i installed :SuperNexus-I777-BUILD5-20121017 [Rom]
my phone is working fine now,
and, i'm trying to figure out where is the Market App on my phone..
mrprince123 said:
thanks
so,
what I did was, i used Kies to emergency reset/initialization for the phone
then, i used Odin 1.85 + Siyah-v3.4.2-nomswap-I777
somehow, my phone is rooted.
then, i installed :SuperNexus-I777-BUILD5-20121017 [Rom]
my phone is working fine now,
and, i'm trying to figure out where is the Market App on my phone..
Click to expand...
Click to collapse
Market is now called Google Play. You might have to CWM flash JB GAPPS.
Sent from my smooth as butter SGH-I777.
idwingdi free
mattern1974 said:
Market is now called Google Play. You might have to CWM flash JB GAPPS.
Sent from my smooth as butter SGH-I777.
Click to expand...
Click to collapse
thanks,,
somehow,,, it doesn't allow me to transfer gapps-jb-20121011-signed.zip to my phone,,
it only allows media format files...
any idea how to solve me?
mrprince123 said:
thanks,,
somehow,,, it doesn't allow me to transfer gapps-jb-20121011-signed.zip to my phone,,
it only allows media format files...
any idea how to solve me?
Click to expand...
Click to collapse
Can you download the GAPPS on your phone through the browser?
mattern1974 said:
Can you download the GAPPS on your phone through the browser?
Click to expand...
Click to collapse
probably yes,
but i have not tried yet.
what should i do if i want to flash another custom ROM in the future?
I think i have to find out a solution for the file transfer issue on Super Nexus http://forum.xda-developers.com/showthread.php?t=1828064.
mattern1974 said:
Can you download the GAPPS on your phone through the browser?
Click to expand...
Click to collapse
i don't know how to get GAPPS thru the browser...
mrprince123 said:
i don't know how to get GAPPS thru the browser...
Click to expand...
Click to collapse
http://goo.im/gapps/
Phalanx7621 said:
http://goo.im/gapps/
Click to expand...
Click to collapse
thanks for your link,
1) can i just browse the site on the phone ? and download the zip file? and run it under CWM mode?
2) I still have to figure out how to transfer non-media files to internal drive (SGH I777 itself)
mrprince123 said:
thanks for your link,
1) can i just browse the site on the phone ? and download the zip file? and run it under CWM mode?
2) I still have to figure out how to transfer non-media files to internal drive (SGH I777 itself)
Click to expand...
Click to collapse
Actually the link in the ROM thread is http://goo.im/gapps/gapps-jb-20121011-signed.zip
Yes you can download the GAPPS to your phone and flash in CWM recovery.
Sent from my smooth as butter SGH-I777.
mrprince123 said:
thanks for your link,
1) can i just browse the site on the phone ? and download the zip file? and run it under CWM mode?
2) I still have to figure out how to transfer non-media files to internal drive (SGH I777 itself)
Click to expand...
Click to collapse
You should be able to pull down the status bar after connecting your phone to the compute and it'll give you the option to use different storage modes to transfer.
mattern1974 said:
Actually the link in the ROM thread is http://goo.im/gapps/gapps-jb-20121011-signed.zip
Sent from my smooth as butter SGH-I777.
Click to expand...
Click to collapse
The link I gave him works fine. He can hopefully find whatever version he wants from that list.
Phalanx7621 said:
You should be able to pull down the status bar after connecting your phone to the compute and it'll give you the option to use different storage modes to transfer.
The link I gave him works fine. He can hopefully find whatever version he wants from that list.
Click to expand...
Click to collapse
You are correct. Didn't mean to step on your toes. Just thought I'd remind him of what the ROM's OP stated.
Sent from my smooth as butter SGH-I777.
Related
Hello there!
I have read through all the Boot loop posts before anyone asks!
My phone is stuck on the Samsung galaxy s2 boot up with the yellow triangle and the black "!" inside (Boot loop). This happened after flashing the wrong kernel on the device first time. Here is the thing, no matter how many times I try to flash the Kernel which I think is "KH1" (99% sure) in download mode with Odin and all the right drivers installed right from Kies, it still won't work! I've tried stock kernels, insecure kernels... you name it I've tried it!
The phone it's self will go into DOWNLOAD mode (which works fine) , but not RECOVERY MODE at all!
I have been trying for days to fix it, but nothing on here will work.
Please some one get back to me and try to help me fix this problem as I want to use my galaxy s2 again. :/
Thanks, Sam.
Mortonx said:
I have read through all the Boot loop posts before anyone asks!
Click to expand...
Click to collapse
Really?
[READ THIS] Got a Boot Loop? Don't post a New Thread!.
Emphasis on the latter part.
oinkylicious said:
Really?
[READ THIS] Got a Boot Loop? Don't post a New Thread!.
Emphasis on the latter part.
Click to expand...
Click to collapse
Yes I have! What part of this post are you on about? I couldn't find anything on how to fix what problem I have.
Mortonx said:
What part of this post are you on about?
Click to expand...
Click to collapse
This part:
Don't post a New Thread!
oinkylicious said:
This part:
Don't post a New Thread!
Click to expand...
Click to collapse
A link would be helpful please. It was the only way I can get my question answered. I asked on that post and no reply.
Flash stock and you are done
Sent from my GT-I9100 using XDA App
Mortonx said:
A link would be helpful please. It was the only way I can get my question answered. I asked on that post and no reply.
Click to expand...
Click to collapse
A link to what? Neither in this thread nor your original post in the correct thread have you said what happens when you flash with Odin (what errors, what messages, what options you're picking), what ROMs you've tried (I try to flash the Kernel which I think is "KH1" (99% sure) sounds rather flakey).
The full, detailed instructions are in the very first post, here in case you missed it.
If it doesn't work when you follow the instructions to the letter, explain in full what does happen and someone might be able to help you.
Mortonx said:
I've tried stock kernels, insecure kernels... you name it I've tried it!
Click to expand...
Click to collapse
Any ROMs?
pulser_g2 said:
Alternatively, it is possible to flash VillainROM 1.1 if you are not comfortable in wiping via recovery, or if you cannot do so for any reason (corrupted kernel etc), as it wipes all users data when installing. Simply ignore steps 2 to 4, and flash VillainROM 1.1 via ODIN instead of the stock ROM.
Any questions about boot loops? Ask them here rather than making new threads.
Click to expand...
Click to collapse
Cangir said:
Flash stock and you are done
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Tried it, didn't work. :/ I don't think I am using the right stock Kernel though. It said JKH1, but not sure if it is the stock one! Please find a link with a stock one that will work on my phone as none will! Thank you.
oinkylicious said:
A link to what? Neither in this thread nor your original post in the correct thread have you said what happens when you flash with Odin (what errors, what messages, what options you're picking), what ROMs you've tried (I try to flash the Kernel which I think is "KH1" (99% sure) sounds rather flakey).
The full, detailed instructions are in the very first post, here in case you missed it.
If it doesn't work when you follow the instructions to the letter, explain in full what does happen and someone might be able to help you.
Any ROMs?
Click to expand...
Click to collapse
Thanks for finding all of this! I tried VillainROM 1.1, didn't work. Just comes up FAIL on Odin. I also tried CF, clock work and many others as I can't remember as I tired loads. :/ I am really stuck and don't know what to do.
Mortonx said:
Please find a link with a stock one that will work on my phone as none will!
Click to expand...
Click to collapse
Assuming you really do have an I9100, stock ROMs are here [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and you should probably be looking for a WIPE ROM, such as XXKI3:
Intratech said:
XXKI3
Android 2.3.5
This original (unmodified) Wipe Package with new bootloader has: PDA: XXKI3| Modem/phone: XXKI3| CSC: OXAKI3
Download: http://www.multiupload.com/NJV6PR87Y3
These packages have the new bootloader removed and repacked with the old ones so you can safely reset the binary counter with a Jig.
Click to expand...
Click to collapse
oinkylicious said:
Assuming you really do have an I9100, stock ROMs are here [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and you should probably be looking for a WIPE ROM, such as XXKI3:
Click to expand...
Click to collapse
Okay thank you, I will give that a try! what shall I do once I have flashed the phone with this wipe rom? Thank you again! Hopefully we should get my phone working by the end of tonight!
Mortonx said:
what shall I do once I have flashed the phone with this wipe rom?
Click to expand...
Click to collapse
Use the phone?
Please make sure you're checking and double checking what you're choosing in Odin, that you have no Kies programs running etc, in other words, read Intratech's posts fully before flashing again!
oinkylicious said:
Use the phone?
Please make sure you're checking and double checking what you're choosing in Odin, that you have no Kies programs running etc, in other words, read Intratech's posts fully before flashing again!
Click to expand...
Click to collapse
Isn't working!! Kies is closed (completely) and it just comes up fail on odin.
Mortonx said:
Isn't working!! Kies is closed (completely) and it just comes up fail on odin.
Click to expand...
Click to collapse
What colour, at what point, is it ever a different colour, is anything happening on the phone? Have you tried different USB ports?
Have you checked task manager for kies related processes? (ctrl+shift+esc, processes), are the drivers correctly installed, what operating system are you using and which architecture? Have you tried it on a different computer?
oinkylicious said:
What colour, at what point, is it ever a different colour, is anything happening on the phone? Have you tried different USB ports?
Have you checked task manager for kies related processes? (ctrl+shift+esc, processes), are the drivers correctly installed, what operating system are you using and which architecture? Have you tried it on a different computer?
Click to expand...
Click to collapse
It says FAIL in red background and black writing and it says "<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Also Checked to see if any Kies programmes was running but there isn't. (Doubled checked in processes as well!)
I am running Windows 7 Home Premium 64 bit and I have tried on a different computer but the phone won't connect at all on that one! (Windows 7 Ultimate 84 bit.)
If you try to flash a multi file firmware and checking re-partition it still fails? I had this by using one file firmwares. Go to Intratech's thread and download a multi file firmware with new bootloaders to get comletely stock. This can not fail.
I have found out that the most stable multi file is xxki3.
While flashing this that way you should not encounter any failures with Odin.
Sent from my GT-I9100 using xda premium
hi guys, any help would really be appreciated.. i think i have the exact same problem as op. let me articulate it in a slightly more clear manner:
1. i flashed an insecure kernel in order to get root access. somewhere along this process somehow something got messed up.
2. the phone is stuck in a bootloop. this shouldnt be a problem! simply flash stock rom/stock modem, enter recovery mode and do a reset!
3. uh-oh. recovery mode crashes instantly, and the endless bootcycle comes back.
4. ive tried using cwm recovery, stock recovery, both of these have failed.
5. download mode works completely fine (using odin 1.85)
im running the AT&T version of galaxy s2 i777, but posting on those forums havent really gotten a solution, with build version UCKH7. I've tried to find a "wipe" package for this build but although i can find stock PDA and stock MODEM, i cannot find stock CSC. in desperation, i have also tried flashing PDA/MODEM/stock PIT at the same time, but this also has not worked. someone on the i777 forums has recommended trying to flash a new bootloader, but im a little wary with taking that step. noone has done it before.
any ideas?
TL;DR: my phone is stuck in a boot loop, but unlike others, recovery mode crashes instantly before i can even explore any options, and reenters bootloop into main android.
Mortonx said:
It says FAIL in red background and black writing and it says "<ID:0/005> Added!!
Click to expand...
Click to collapse
What exactly are you putting into each section in Odin, and which settings are checked? How long does the process take? Did you ever (either when you originally messed it up or while trying to fix it) choose any of the pit/repartition settings? What did you originally flash to cause the problem in the first place?
Is it possible to get screenshots with phone connected before flashing and one afterwards with all the options you're using shown?
This thread mentions something I asked earlier as the solution but you didn't respond to. Have you tried a different USB port and reinstalled the drivers (in Kies: tools -> install driver).
Kies also has a "firmware emergency recovery" though I've got no idea what that does, or if it's recommended to try.
oinkylicious said:
What exactly are you putting into each section in Odin, and which settings are checked? How long does the process take? Did you ever (either when you originally messed it up or while trying to fix it) choose any of the pit/repartition settings? What did you originally flash to cause the problem in the first place?
Is it possible to get screenshots with phone connected before flashing and one afterwards with all the options you're using shown?
This thread mentions something I asked earlier as the solution but you didn't respond to. Have you tried a different USB port and reinstalled the drivers (in Kies: tools -> install driver).
Kies also has a "firmware emergency recovery" though I've got no idea what that does, or if it's recommended to try.
Click to expand...
Click to collapse
It takes like 2 seconds on this one, other kernels which I flash take about 30 seconds then say PASS, but still boot loops. I haven't choose any of the pit/repartition settings. I just flashed the wrong kernel from trying to root the device for the first time, but this just put it into the boot loop.
I am just putting the "New_Bootloader_GT-I9100_OXA_I9100XXKI3_I9100XXKI3_I9100OXAKI3.tar" in into the PDA and then pressing start. I can't put a screen shot up here though as it won't let me.
I have tried different USB ports and reinstalled drivers. I also tried "firmware emergency recovery" but kies doesn't connect to my phone.
mariosraptor said:
If you try to flash a multi file firmware and checking re-partition it still fails?
Click to expand...
Click to collapse
To OP, have you tried this? If all of your attempts thus far have involved a single file, and no repartition, if could be worth a try with one of the packages which has PDA/Phone/CSC as separate files (as on Intratech's description here: http://img94.imageshack.us/img94/8290/odinxm.jpg). Failing that, you could try a ROM which comes with a PIT file to repartition the phone in case the partition table is somehow corrupt/damaged/incorrect, but you might want to consider that a last resort.
Hi,
First of all sorry, i know this might be an "again" thread. but im new to these rooting and etc, which i require some help after reading up most of "rooting" threads and i become confused. Pls advice and give steps on how to root, possible with links to "what downloads require" and etc.
Thanks and appreciations.
Device Info:
Model Number
GT-I9100
Andriod Version
4.0.4
Baseband Version
I9100XXLQ6
Kernel Version:
3.05. 15-1068762
[email protected] #3
SMP PREEMPT Wed Aug 29 13:40:41 KST
2012
Build Number
IMM76D.XWLPX
Saw 1 of the thread i also downloaded eMMC check and here's the result.
EMMC Chip
Type: VYL00M
Date: 12/2011
CID: 15010056594c30304d197ae24daacee1
FwRev: 0.19
Brick Bug? (This the problem where i not sure whether i should root phone or not, or rather HOW do i root with this)
YES. Insane Chip
Download a custom kernel like siyah or dorimanx and install it via Odin. That'll provide root access as well as safeguarding you from the emmc bug.
Look around for a guide on how to use Odin.There's a very comprehensive one somewhere on this site.. if you can't find it, I'll post a short tutorial here.
Also you can download siyah from here. www.gokhanmoral.com
Ensure you download the TAR version of siyah 4.1.5 (for the S2)
Hope this helps
Sent from my GT-I9100 using xda app-developers app
so download the TAR version of it only? i got odin installed previously as i manual update my phone.
and if u dont mind the post, i will be thankful since it would be more situational wise for me. thanks :laugh:
Yeah. TAR version is for installation via Odin, zip for installing using CWM.
if you've used Odin before the process is the same. Too lazy to search? Tut tut.
Here ya go. Coz I'm nice.
The steps involved (credits to chainfire) are as follows:
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select the .tar file.
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot.
- Done
Ensure you have the correct drivers for your phone before starting Odin. And also that you have disabled KIES. It tends to interfere with Odin
Good luck.
Using the thanks button is preferable to typing out thanks. Easier too.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
Yeah. TAR version is for installation via Odin, zip for installing using CWM.
if you've used Odin before the process is the same. Too lazy to search? Tut tut.
Here ya go. Coz I'm nice.
The steps involved (credits to chainfire) are as follows:
- (USB) Disconnect your phone from your computer
- Start ODIN
- Click the PDA button, and select the .tar file.
- Put your phone in download mode
- (USB) Connect the phone to your computer
- Make sure repartition is NOT checked
- Click the START button
- Wait for the phone to reboot.
- Done
Ensure you have the correct drivers for your phone before starting Odin. And also that you have disabled KIES. It tends to interfere with Odin
Good luck.
Using the thanks button is preferable to typing out thanks. Easier too.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
ok.. so how to disable KIES? and download mode is VOL DOWN + HOME + POWER right?
oh and also will all my apps gone?
rhythmist said:
ok.. so how to disable KIES? and download mode is VOL DOWN + HOME + POWER right?
Click to expand...
Click to collapse
Kill the KIES processes via your computer's task manager.
rhythmist said:
oh and also will all my apps gone?
Click to expand...
Click to collapse
After flashing a kernel? No.
Sent from my GT-I9100 using xda app-developers app
HAXTREME said:
Kill the KIES processes via your computer's task manager.
After flashing a kernel? No.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
oh so following the steps u stated. all the stuffs on current phone wont gone and it will be rooted?
rhythmist said:
oh and also will all my apps gone?
Click to expand...
Click to collapse
No.
You should have done a bit of research before you muck about with your phone.You know about the potential brickbug,but you should know the basics of recovery/cwm/odin.
If you cant follow what Haxtreme is saying then
Root using method in my sig
Then backup efs
Then flash latest siyah kernel
Then make nand backup
Then stay as you are or install custom rom.
Theres a picture in my sig you might be interested in..........lol
if failed. how? ><
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
theunderling said:
No.
You should have done a bit of research before you muck about with your phone.You know about the potential brickbug,but you should know the basics of recovery/cwm/odin.
If you cant follow what Haxtreme is saying then
Root using method in my sig
Then backup efs
Then flash latest siyah kernel
Then make nand backup
Then stay as you are or install custom rom.
Theres a picture in my sig you might be interested in..........lol
Click to expand...
Click to collapse
oh ok will try.
theunderling said:
No.
You should have done a bit of research before you muck about with your phone.You know about the potential brickbug,but you should know the basics of recovery/cwm/odin.
If you cant follow what Haxtreme is saying then
Root using method in my sig
Then backup efs
Then flash latest siyah kernel
Then make nand backup
Then stay as you are or install custom rom.
Theres a picture in my sig you might be interested in..........lol
Click to expand...
Click to collapse
sorry, pardon being noob here. but again
How to backup efs
How to flash latest siyah kernel
How to make nand backup
How to install custom rom. and custom rom where to find?
tbh i read alot of stuffs but it just wont get into me lol. thats why im noobish ><
Theres a difference between a noob and a lazy noob.
You see you can eliminate pc/odin problems by using recovery to root and mobile odin(after your rooted) to flash kernels etc.
If you dont learn the "basics",then its your phone that wont work.
no. actually its done(rooting). just want to know what are those u typed.
1.efs can get corrupted
2.to avoid 4.0.4 stock brickbug
3.makes a system snapshot
4.faster/sleeker than samsung roms
Theres the clues,its now up to you.
Now wheres that taxi I ordered 30 mins ago..........lol
Greetings.
I know this forum can get quite annoyed with posts being repeated and the same question being asked many times over.
I would just like to say that I have searched this forum for the problem I have, however either the posts are beyond my knowledge or not directly related to my issues. If I have missed something please let me know.
First things first. My phone.
I have an International Samsung Galaxy S3
It is running Stock JellyBean 4.1.1 (O2 UK)
It has been rooted with Odin. (I only rooted because I wanted to use Titanium Backup). It has been rooted successfully for about 3 weeks.
I wish I could give the exact firmware and other figures but I can't access them on my phone.
The Problem
Today whilst working at my desk I decide to check my phone but when I look at it there is a message being displayed that states "Encryption Failed". There is some text saying that I need to factory reset my phone and then, below that is a reset button. I press the reset button, the phone reboots to exactly the same screen. I press it again... And again... And again.
Now it boots into CWM-based recovery. Figuring I don't want to screw this phone up further without finding out what the problem is, i restart the phone again. Now the phone just boots into the Samsung logo and then reboots and so the cycle continues.
I have no idea how this happened, it was so random and unexpected.
What should I do?
The good points
I can still get into CWM-Recovery
From reading previous posts I have downloaded Samsung toolkit but its well beyond my capabilities.
The bad points
I haven't a clue what to do
Having only just switched to android and learnt the basics about rooting, I really need some assistance with this problem.
Please, please, if there is anyone on XDA who can help point me in the right direction I would forever be grateful.
Tried flashing a clean, stock ROM from Odin?
robogo1982 said:
Tried flashing a clean, stock ROM from Odin?
Click to expand...
Click to collapse
Thank you. I will look into how to do that. I've only ever rooted, never flashed any kind of ROM. I apologise for my noobness.
The one good thing about this is that I certainly will learn a lot more about my phone in a short space of time.
I will update when I have tried this.
Also will the 'backup and restore' or 'reboot recovery' in CWM be of any use?
Thanks again.
Sent from my Nexus 7 using xda premium
If you made a backup when you rooted with cwm recovery, then I would try to restore it 1st.
Sent from the S3
shinyazz52 said:
If you made a backup when you rooted with cwm recovery, then I would try to restore it 1st.
Sent from the S3
Click to expand...
Click to collapse
Unfortunately I didn't make a backup in CWM, so I cannot restore (I'll be sure too next time though).
Thanks for your suggestion.
Just to update.
Now the phone just gets stuck on the Samsung glowing screen and doesn't keep restarting. I still have access to CWM.
I'm still searching for the Official Jelly Bean ROM to download for my phone.
Starchini said:
Just to update.
Now the phone just gets stuck on the Samsung glowing screen and doesn't keep restarting. I still have access to CWM.
I'm still searching for the Official Jelly Bean ROM to download for my phone.
Click to expand...
Click to collapse
http://www.sammobile.com/
I have now opened Odin3 v1.85.
Interesting to note that the top black bar says 'Epic 4G'. I don't know if that is of any significance.
I've found the ROM which i relevant to my phone, i think (I9300XXDLIB)
Just to ask, I'm not needing to download any firmware? Different firmware versions were the major results i found when searching. I wouldn't be able to tell you what firmware I'm on, other than to say its Stock o2 UK firmware, whatever that maybe.
Thanks again for the replies.
UPDATE:
I just used odin to try and install the new ROM but it failed.
"
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
I don't know what else to try
Starchini said:
I have now opened Odin3 v1.85.
Interesting to note that the top black bar says 'Epic 4G'. I don't know if that is of any significance.
I've found the ROM which i relevant to my phone, i think (I9300XXDLIB)
Just to ask, I'm not needing to download any firmware? Different firmware versions were the major results i found when searching. I wouldn't be able to tell you what firmware I'm on, other than to say its Stock o2 UK firmware, whatever that maybe.
Thanks again for the replies.
Click to expand...
Click to collapse
I think that I9300XXDLIB is a polish firmware , are you sure it wasnt I9300XXDLIH ,that is what comes up on sammobile when searching for the stock o2 jb
shinyazz52 said:
I think that I9300XXDLIB is a polish firmware , are you sure it wasnt I9300XXDLIH ,that is what comes up on sammobile when searching for the stock o2 jb
Click to expand...
Click to collapse
Please can you provide a link? Its my first time on Sammobile so im still trying to find it. Thanks.
Ok.. After that first try failure I've noticed the phone doesn't even get past the Samsung Galaxy s3 boot screen.
I still have access to CWM through pressing the right buttons.
Starchini said:
Please can you provide a link? Its my first time on Sammobile so im still trying to find it. Thanks.
Click to expand...
Click to collapse
Mate I think ( if i remember rightly) you need an account on there to download , but here you are
http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=O2U&os=1&type=1#firmware
shinyazz52 said:
Mate I think ( if i remember rightly) you need an account on there to download , but here you are
http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=O2U&os=1&type=1#firmware
Click to expand...
Click to collapse
I've just created an account with them and am waiting to download the file. My God, if this works you are my freaking savior! My own personal Jesus f**king Christ.
If doesn't I still really appreciate you helping.
Starchini said:
I've just created an account with them and am waiting to download the file. My God, if this works you are my freaking savior! My own personal Jesus f**king Christ.
If doesn't I still really appreciate you helping.
Click to expand...
Click to collapse
Mate I am no expert myself !, just trying to point in right directions. I am wondering if you should do factory reset from recovery before flashing again , anyone else advise please
Starchini said:
I've just created an account with them and am waiting to download the file. My God, if this works you are my freaking savior! My own personal Jesus f**king Christ.
If doesn't I still really appreciate you helping.
Click to expand...
Click to collapse
Alright alright, let's start with some basic stuff here.
1)- Do you have a micro sd card in there? And a card reader to read/write content to it from your PC? (We can use this to flash another ROM directly from CWM).
2)- Did you enter download mode when attempting to flash with ODIN? (Powerdown + Home + Power button)?
Everyone should follow the layout of the first post when asking for help, makes it way easier for people to understand and help.
Skander1998 said:
Alright alright, let's start with some basic stuff here.
1)- Do you have a micro sd card in there? And a card reader to read/write content to it from your PC? (We can use this to flash another ROM directly from CWM).
2)- Did you enter download mode when attempting to flash with ODIN? (Powerdown + Home + Power button)?
Click to expand...
Click to collapse
Hi,
1) Yes I have a micro SD card, which I can use to place files on from my PC.
2) Yes, I entered download mode when flashing to from Odin (The screen with the warning about installing custom software). I clicked ok, and then Odin detected my phone.
I'm currently downloading PDA:I9300XXDLIH & CSC:I9300O2UDLI3 as I'm aware the last ROM could have been the wrong one.
Any assistance would greatly appreciated.
Hope all goes well mate , skander1998 will have much more knowledge than I
shinyazz52 said:
Hope all goes well mate , skander1998 will have much more knowledge than I
Click to expand...
Click to collapse
Thanks for pointing me in the right direction, you may not be an expert but you're one step ahead of me.
Starchini said:
Thanks for pointing me in the right direction, you may not be an expert but you're one step ahead of me.
Click to expand...
Click to collapse
If ODIN doesn't work after all, download Android Revolution or any other stock based ROM, place it in your external SD card, and flash it from CWM, Factory reset and that should work.
Skander1998 said:
If ODIN doesn't work after all, download Android Revolution or any other stock based ROM, place it in your external SD card, and flash it from CWM, Factory reset and that should work.
Click to expand...
Click to collapse
Thank you. I will try this and let you know. Hopefully it will work.
Hello *,
I need to install ICS or anything newer on a Samsung Galaxy Tab 10.1 3G P7500XXKG7. Stock roms stopped at Honeycomb.
I know there are lots of howtos out there, but I've read lots of them and I'm still stuck with Honeycomb.
I've successfully rooted the tab. I've installed Rom Manager (not sure if it is absolutely necessary, but those guides seem to lead you in that direction). I can "adb moo" all day long and all the rest.
My problem is that Rom Manager does not recognize my tab model and so does not install a recovery itself. I've downloaded what I suppose to be a recovery compatible with my device from droidbasement.com, untarred the recovery.tar.md5 file, obtained a recovery.img file, adb-pushed it in
/mnt/sdcard/clockworkmod/download/download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.1-p4wifi.img
so that Rom Manager may think that's the p4wifi file it downloaded itself and it may use that... except it doesn't.
The question is: how do I manually install the recovery in Rom Manager without using windows crapware? I "only" have linux (heck, shouldn't be windows users to complain they "only" have windows? Android is linux based after all...), I can copy files wherever it's needed, I only miss one information: where should I copy recovery.img file in order to make Rom Manager recognize and boot into it?
Thanks in advance
Lucio.
First, currently there are stock ics 4.0.4 roms. You can download them from sammobile.com and flash it via odin. Second, you have the 3g version, so you should be downloading p4, p4wifi is for the wifi only version. Lastly, you don't need to untar the file. Just flash it via odin or mobile odin. Though i recommend using odin since mobile odin fcked up my tab before.
eushaun99 said:
First, currently there are stock ics 4.0.4 roms. You can download them from sammobile.com
Click to expand...
Click to collapse
Thanks for the news. Can you please provide a link to my firmware at sammobile? I've searched for it but I couldn't find it.
eushaun99 said:
and flash it via odin
Click to expand...
Click to collapse
.
You see, Odin does not work without windows... however that shouldn't be a real problem, seems that heimdall is a good alternative.
eushaun99 said:
Second, you have the 3g version, so you should be downloading p4, p4wifi is for the wifi only version
Click to expand...
Click to collapse
I know, but I was trying to trick Rom Manager (which apparently does not support p4) by overwriting its p4wifi recovery file with the p4 one (it does support p3, but I don't feel like trying random bits).
Just go to sammobile.com, click firmwares, key in all your details and enter. Keep in mind that u have to be logged in to download.
eushaun99 said:
Just go to sammobile.com, click firmwares, key in all your details and enter. Keep in mind that u have to be logged in to download.
Click to expand...
Click to collapse
Already tried that. The problem is that XXKG7 does not show up in the results and I don't know if I can safely use the rom for a different model.
I can't post links, but if you wanna try, just select Tablet/Android/GT-P7500 - Galaxy Tab 10.1/any Italy option (though mine is from H3G).
Is there a way to search by "XXKG7" on sammobile? Tried the search box but it finds nothing.
I believe the XXKG7 is 3.2. The model number is different in ics. Besides, you can also use other countries rom. The only difference is the language. So if the rom has italian language, then you can use that also. On a side note, i wouldn't recommend using your countries rom because of the deep sleep problems. Head down to the development forum, there is a stock ics rom from czech republic which fixes the deep sleep problem. I'll try to find a link for u. Give me a moment.
Edit: here it is. http://forum.xda-developers.com/showthread.php?t=2219964
download the rom from that thread and flash it.
eushaun99 said:
here it is. http://forum.xda-developers.com/showthread.php?t=2219964
download the rom from that thread and flash it.
Click to expand...
Click to collapse
Thanks for looking it up for me. I've downloaded the file (7z format), unzipped and obtained a .tar.md5 file. I abandoned heimdall, it seems it does not support my device, and borrowd a windows notebook from a friend so that I can use Odin.
Odin recognizes my p4 when connected in recovery mode (but not in download mode, e.g. when "Download" is flashing). Anyway I assume this is ok.
Now the problem is: Odin shows 5 file choosers, namely PIT, BOOTLOADER, PDA, PHONE and CSC. Which is the correct one? Where should I put the file I downloaded?
lucrus73 said:
Thanks for looking it up for me. I've downloaded the file (7z format), unzipped and obtained a .tar.md5 file. I abandoned heimdall, it seems it does not support my device, and borrowd a windows notebook from a friend so that I can use Odin.
Odin recognizes my p4 when connected in recovery mode (but not in download mode, e.g. when "Download" is flashing). Anyway I assume this is ok.
Now the problem is: Odin shows 5 file choosers, namely PIT, BOOTLOADER, PDA, PHONE and CSC. Which is the correct one? Where should I put the file I downloaded?
Click to expand...
Click to collapse
PDA is the one you need
Sent from my GT-P7510 using XDA Premium HD app
eushaun99 said:
PDA is the one you need
Click to expand...
Click to collapse
Thanks. Unfortunately it does not work. Here is the output from Odin:
Code:
<ID:0/023> Added!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P7500XWMPJ_deepsleep.tar.md5 is valid.
<OSM> Checking MD5 finished successfully..
<OSM> Leave CS..
<ID:0/023> Odin v.3 engine (ID:23)..
<ID:0/023> File analysis..
<ID:0/023> SetupConnection..
<ID:0/023> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1 )
Now I suspect that the fact my device is being recognized only in recovery mode is not ok at all... even then, I do not know what to do next...
There is another way. Toldo has made a flashable zip of that ROM in his stock ics rooted, deodexed, and zipaligned thread. Here's the link. q.gs/4BYrw. Flash it from any custom recovery. Make sure to make a full wipe just in case to avoid any problems.
Sent from my GT-P7510 using XDA Premium HD app
eushaun99 said:
Flash it from any custom recovery
Click to expand...
Click to collapse
Sorry to ask probably trivial questions, but how do I install a custom recovery given that Rom Manager does not support my p4 (any p4), but it only p4wifi?
ROM manager isn't the only way to flash recoveries. Use Odin or mobile Odin to flash. (In Odin hit PDA also.) Or if you know how to use adb or terminal(which I don't think you know given this question), rename recovery file to recovery.img
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p2
Click to expand...
Click to collapse
Sent from my GT-P7510 using XDA Premium HD app
---------- Post added at 11:13 PM ---------- Previous post was at 11:10 PM ----------
Download cwm recovery from droidbasement
Sent from my GT-P7510 using XDA Premium HD app
eushaun99 said:
ROM manager isn't the only way to flash recoveries. Use Odin or mobile Odin to flash. (In Odin hit PDA also.)
Click to expand...
Click to collapse
Odin doesn't connect in my case, recall?
eushaun99 said:
Or if you know how to use adb or terminal(which I don't think you know given this question)
Click to expand...
Click to collapse
I do know how to use both adb and a terminal, I stated that in my 1st post, but you led me down a different path.
lucrus73 said:
I can "adb moo" all day long and all the rest. <...> adb-pushed it <...> I "only" have linux <...> I can copy files wherever it's needed
Click to expand...
Click to collapse
What I do not know (what I didn't know until your last post) is the place where I should put the recovery.img file. Now the dd command you posted shows the correct place is the mmcblk0p2 partition, which is basically what I was asking for in my first post. So, before calling my words into question, please take the time to read what I'm asking for:
lucrus73 said:
where should I copy recovery.img file in order to make Rom Manager recognize and boot into it?
Click to expand...
Click to collapse
Ok, maybe Rom Manager is not exactly required to boot into the custom recovery, but the question seems very clear to me anyway.
Whatever, it doesn't really matter, you helped me a lot after all, it's only a bit troublesome writing lots of details in the questions only to find out that people do not bother reading them...
Now that I know the correct place, the next question arises: how do you know that's the correct place? I mean, fstab says nothing about it. Where the fact that "power+volume down" boots mmcblk0p2 and not something else is written? Or is there a magic dictionary of tablet models and corresponding recovery partitions out there?
eushaun99 said:
Download cwm recovery from droidbasement
Click to expand...
Click to collapse
Yes I know, already downloaded that, it's where my 1st post recovery.img file came from...
If you know how to use adb, just do the commands I posted. I copied them from kasper_h's infamous AOKP thread, so I don't think there will be anything wrong.
I'm sorry I didn't read your first post thoroughly. Its been awhile that I last read your first post that I forgotten what you wrote..
If you want to know more about mmcblk0p2 stuff, I suggest you ask the experts in this forum since I don't know sh*t about this stuff.
Sent from my GT-P7510 using XDA Premium HD app
this is the message i get in odin when trying to root any ideas?
drewdinie said:
this is the message i get in odin when trying to root any ideas?
Click to expand...
Click to collapse
Update Odin to 1.3
dragonstalker said:
Update Odin to 1.3
Click to expand...
Click to collapse
Tried that same thing. Basically I just want cyanogenmod so I went to the wiki and it didn't say anything about rooting so I followed the instructions on the heimdall flash and at the end of the transfer it says failed to communicate last package or something like that?
drewdinie said:
Tried that same thing. Basically I just want cyanogenmod so I went to the wiki and it didn't say anything about rooting so I followed the instructions on the heimdall flash and at the end of the transfer it says failed to communicate last package or something like that?
Click to expand...
Click to collapse
Hmm, that's weird. and i'm sure you have redownloaded the tar and pit files. Try Odin 1.9 and see if it jogs something loose in there.
dragonstalker said:
Hmm, that's weird. and i'm sure you have redownloaded the tar and pit files. Try Odin 1.9 and see if it jogs something loose in there.
Click to expand...
Click to collapse
dont know how to redownload tar and pit files
drewdinie said:
dont know how to redownload tar and pit files
Click to expand...
Click to collapse
The tar and pit files are for odin. So you will find these in the rooting guide.