Related
hello! My name is Gagan Vj!
I am new here!
I want to show you guys the glue cracks which are there in the transparent strip of my phone..
damn...i realised i cant post images till i reach 10 posts!
but i wanna tell u that there is a glue that is coming btw the glass strip!
I wanna know guys, I was worried whether this glue pattern u see in the middle ( in home button ) .. is it faulty? should i go and get it replaced? it is in the warranty period. I am not sure whether they would replace my complete fone! May be they replace the Bar itslef? replacing the bar may be still a serious issue, My fone may not remain in a good position after replacing the bar!
Also My last issue, sometimes i see Yellowish Images turn green!
is it occuring to other XP owners aswell?
Thanks guys! I need ur Help!
gaganvj197 said:
hello! My name is Gagan Vj!
I am new here!
I want to show you guys the glue cracks which are there in the transparent strip of my phone..
damn...i realised i cant post images till i reach 10 posts!
but i wanna tell u that there is a glue that is coming btw the glass strip!
I wanna know guys, I was worried whether this glue pattern u see in the middle ( in home button ) .. is it faulty? should i go and get it replaced? it is in the warranty period. I am not sure whether they would replace my complete fone! May be they replace the Bar itslef? replacing the bar may be still a serious issue, My fone may not remain in a good position after replacing the bar!
Also My last issue, sometimes i see Yellowish Images turn green!
is it occuring to other XP owners aswell?
Thanks guys! I need ur Help!
Click to expand...
Click to collapse
Go to a service center mate as this is a common issue.It is the glue from led bar and default screen protector as they were not putted correctly with thermal press from factory.They may replace it or fix it in a couple of days
cpascal7 said:
Go to a service center mate as this is a common issue.It is the glue from led bar and default screen protector as they were not putted correctly with thermal press from factory.They may replace it or fix it in a couple of days
Click to expand...
Click to collapse
Are u sure Mate I should go and give it to service center? Dunno, but they may take max a month to return it or so, I saw in Sony's Official forum, i guy had his fone replaced within a Month!
My Xperia P also have the exact same issue. When i press the bar from both sides it will go away , but after some time it comes back. I think the glue between the bar is going off. I also dont have the warranty.
If you had done even a small search, you would have seen that this is already in active discussion on another thread.
http://forum.xda-developers.com/showthread.php?t=2204585
A lot of other Xperia P users are having this issue and there is no known solution to it, just to take it to the repair service
I am having the same problem. But giving it to service centre is not a useful decision.
First , they will consider it as a design, not a flaw
Second, even if they change the strip , then the problem will arise again.
my past experience with service centre is not good. they will surely give more scratches to your phone, than you currently have
you can buy spare strip from here :
http://www.ebay.com/itm/271177609149?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
So it looks like a small part of the top of my screen is dead, already tried everything and no luck, The draw line test shows about a 10% of the screen not working. I think this might be a hardware problem, but not sure.
If its the hardware, is it possible to only replace the Digitizer glass, without replacing the LCD screen?
Where can I buy the part (hopefully Original, I read that third party replacements are usually disappointing, because of quality.)? I tried searching in ebay and amazon and was only able to find for the HTC one X not the plus version.
Is it too hard to replace or i'm better saving for a new phone?
Do you mean the area where the status bar is? My HOX+ also doesn't recognize touches there. It happened suddenly 5 months ago when I was playing games . However, I used to it and it is not a big problem, I will give it to repair when I get on vacation .
I already made some researches on the internet and it is not an uncommon problem for touch screens. Yes, it is the digitizer's fault.
/\/\ said:
Do you mean the area where the status bar is? My HOX+ also doesn't recognize touches there. It happened suddenly 5 months ago when I was playing games . However, I used to it and it is not a big problem, I will give it to repair when I get on vacation .
I already made some researches on the internet and it is not an uncommon problem for touch screens. Yes, it is the digitizer's fault.
Click to expand...
Click to collapse
Exactly the same problem, upper part of the screen (all notification bar). I have an OCD and this tiny things bug me a lot. I guess now I need to find a digitizer to replace it, the problem is that on ebay and other sites there are not HOX+ available, all are for the HOX.
Is there any difference between HOX and HOX+ digitizers? I thought both got the same screen.
I'm not an expert so I won't fix it on my own, better send it back to service .
Btw. I've read one time that you can put a piece of paper between the bezel and grill to clean some mess up which could get inside the phone. I was wondered that I was able to slip the paper there, but it didn't work .
Arcano30 said:
So it looks like a small part of the top of my screen is dead, already tried everything and no luck, The draw line test shows about a 10% of the screen not working. I think this might be a hardware problem, but not sure.
If its the hardware, is it possible to only replace the Digitizer glass, without replacing the LCD screen?
Where can I buy the part (hopefully Original, I read that third party replacements are usually disappointing, because of quality.)? I tried searching in ebay and amazon and was only able to find for the HTC one X not the plus version.
Is it too hard to replace or i'm better saving for a new phone?
Click to expand...
Click to collapse
Hi you will find your parts here they sell OEM parts. (http://www.etradesupply.com/htc.html)
Goodluck!
Dont forget to hit the thanks button
Optimus said:
Hi you will find your parts here they sell OEM parts.
Goodluck!
Dont forget to hit the thanks button
Click to expand...
Click to collapse
Anyone tryed to replace screen with digitizer? it helps?
Screen replacement
edenlt said:
Anyone tryed to replace screen with digitizer? it helps?
Click to expand...
Click to collapse
Hi goto youtube and see a video how to replace..
Optimus said:
Hi goto youtube and see a video how to replace..
Click to expand...
Click to collapse
Hi, i know how to replace it, my question was if i replace screen dead zone will dispier?
edenlt said:
Hi, i know how to replace it, my question was if i replace screen dead zone will dispier?
Click to expand...
Click to collapse
yes it will work, but you can't only change the digitizer, it's too hard glued together. I broke my LCD connector while replacing the screen although
I was really careful, so it's not as easy as everyone says.
Thx, i will keep that in mind.
Why, hello there!
First of all i would like to apologize for two things:
(1) My English is awful so bear with me please!
(2) I couldn't find an answer for this question and i tried really hard. So if there does exist an answer please point me to it nicely
Now, concerning my problem.
I have bought Elephone P8 from Banggood . com
(link could not be uploaded cause i am a new user)
(if you want to view the phone go to Banggood and searh for Elephone P8 :angel: )
From Day 1 I have had a problem with my screen. It touches itself!!
I didn't do anything for that problem as i didn't believe it could be possible for a phone to touch the screen itself.
Now into details:
When i unlock my phone and use it after a couple of minutes (i have enabled the option to view the clicks on the screen) i see thousand clicks on my touchscreen in a vertical line. From the speaker (where you talk) to the home button. It is always in the same line!!
And when i close the display of my phone and unlock it again, the thousand clicks stop and the phone works normally again.. :/
I know that it is hardware problem because i have changed roms, i have rooted and i did all i could to fix it softwarely! :fingers-crossed: SO i am convinsed it is Hardwared reallated issue! :victory:
MY QUESTION IS:
How can i fix this problem if i want to open my phone?? If i change the glue between the glass and the LCD will it fix it??
Please , please , please! Don't tell me to send it back and ask for a new one OR take it to an expert to fix it!
THANKS A BUNCH GUYS!!!
It could (!) be just some stress on the Screen. Maybe you could do something if you just disassemble it, look where the stress could come from, and put it together again after that.
I had that a few years before, and for me was the Solution to bend the Case a bit, in which the Screen was pressed.
Hopefully that works for you
Thanks for your reply man! I really appreciate it!
Now that you mention it, when i dissasembled my phone i couldnt unscrew the last screw that is attaching the motherboard to the screen. It was so hardly screwed!
Maybe that little screw does the job, so i will try and unscrew it!
ONE MORE THING
If for some reason i can't find the pressure point from inside the phone, what other options do i have?? Since i have scratched the front glass a bit, i am in the temptation to change the front glass and clean the Screen a bit.
What do you think?
P.S.: Further advice is very much appreciated!
small guide to repair damaged touch screen & Upgrade to rk 3188
last weekend i have replaced my touch screen display damaged, and upgrade my KGL dual core cpu to RK3188 quad core:
I order display replacement and slot CPU from my vendor (25+75$)
Tutorial
1. wait delivery from china ...
2. remove 4 screws behind the panel of unit
3 remove 4 screws to pull up the display,remove the little orange connection of toch screen, then remove 2 svcrews and tape to slot cpu.
4 pull up display and disassemble by removing scotch tape.
5 replace the new touch panel, be very careful don't touch the glass on the inside...
6 lock the display with new scotch tape, re connect little orange connection on the inside
7 assemble all...
for new cpu need to download new ROM with rk3188 firmware like this: http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068
put on sd card and flash it...
no need to flash new MCU (is the same)
enjoy
veget83 said:
last weekend i have replaced my touch screen display damaged, and upgrade my KGL dual core cpu to RK3188 quad core:
I order display replacement and slot CPU from my vendor (25+75$)
Tutorial
1. wait delivery from china ...
2. remove 4 screws behind the panel of unit
3 remove 4 screws to pull up the display,remove the little orange connection of toch screen, then remove 2 svcrews and tape to slot cpu.
4 pull up display and disassemble by removing scotch tape.
5 replace the new touch panel, be very careful don't touch the glass on the inside...
6 lock the display with new scotch tape, re connect little orange connection on the inside
7 assemble all...
for new cpu need to download new ROM with rk3188 firmware like this: http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068
put on sd card and flash it...
no need to flash new MCU (is the same)
enjoy
Click to expand...
Click to collapse
Many thanks for you tuto my friend is great but why you underline all about cpu change? i wanna change my cpu for one more faster, could you tell me pls if you did problems with?
Regards!!!
this is very simple and there are no problem, all work perfectly!
veget83 said:
last weekend i have replaced my touch screen display damaged, and upgrade my KGL dual core cpu to RK3188 quad core:
I order display replacement and slot CPU from my vendor (25+75$)
Tutorial
1. wait delivery from china ...
2. remove 4 screws behind the panel of unit
3 remove 4 screws to pull up the display,remove the little orange connection of toch screen, then remove 2 svcrews and tape to slot cpu.
4 pull up display and disassemble by removing scotch tape.
5 replace the new touch panel, be very careful don't touch the glass on the inside...
6 lock the display with new scotch tape, re connect little orange connection on the inside
7 assemble all...
for new cpu need to download new ROM with rk3188 firmware like this: http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068
put on sd card and flash it...
no need to flash new MCU (is the same)
enjoy
Click to expand...
Click to collapse
hi,
dear am planning to upgrade my screen to higher res, mine with 800x480, and I want to upgrade my rk3066 to 3188, whats you advices please?
can you help me to find good dealers and websites please?
Can you please give a link where you ordered your digitizer, please?
robertut said:
Can you please give a link where you ordered your digitizer, please?
Click to expand...
Click to collapse
If you need parts for Joying Head units please PM me and I will try to help.
I need to know your exact model number or a link to it.
Mine is not a Joying head unit.
I need a digitizer for my KGL rk3066 unit, aka Naval 2. Any ideas where to order one from?
Thanks
Digitizer failing symptoms?
Yesterday and this morning my HU touchscreen failed to work on first boot. After rebooting (reset or acc off for 30 sec) it restarts and work fine.
I wonder if it is sign of failing digitizer? How yours have behaved? I want to be sure it is failing digitizer as I also updated MCU (KGL) to 2.83 posted here on XDA and touchscreen problem started after that.
I'll try to revert to old MCU version (2.80) but I will be thankful also for info on signs of failing digitizer (as I also installed the reverse camera and I have also clues that sometimes reversing line may introduce some ghost current into MCU so it may also coincide with touchscreen issues somehow).
Any help and experience sharing appreciated so I can pinpoint the source of issue not rushing to replace digitizer itself if it is not busted for sure.
At last!!
I'm not the only one.It happens the same with my unit.Mine is kgl4.
I tried many mcu's and malaisk roms,etc.
pa.ko said:
Yesterday and this morning my HU touchscreen failed to work on first boot. After rebooting (reset or acc off for 30 sec) it restarts and work fine.
I wonder if it is sign of failing digitizer? How yours have behaved? I want to be sure it is failing digitizer as I also updated MCU (KGL) to 2.83 posted here on XDA and touchscreen problem started after that.
I'll try to revert to old MCU version (2.80) but I will be thankful also for info on signs of failing digitizer (as I also installed the reverse camera and I have also clues that sometimes reversing line may introduce some ghost current into MCU so it may also coincide with touchscreen issues somehow).
Any help and experience sharing appreciated so I can pinpoint the source of issue not rushing to replace digitizer itself if it is not busted for sure.
Click to expand...
Click to collapse
I think maybe you have a little problem of contact... try to open front panel and see the connection of digitizer...
in my case, the damaged digitizer create a problem at the top area of screen... in middle and bottom the screen always work fine...
dont think yours is a software problem...
veget83 said:
I think maybe you have a little problem of contact... try to open front panel and see the connection of digitizer...
in my case, the damaged digitizer create a problem at the top area of screen... in middle and bottom the screen always work fine...
dont think yours is a software problem...
Click to expand...
Click to collapse
Well, in meantime I again updated to v2.83 - from diff sorce - to repeat test. After few days - problem reappeared. With old version for almost month, cold weather etc, - no probs.
Just for anyone interested to know. I may be SW prob after all.
veget83 said:
I think maybe you have a little problem of contact... try to open front panel and see the connection of digitizer...
in my case, the damaged digitizer create a problem at the top area of screen... in middle and bottom the screen always work fine...
dont think yours is a software problem...
Click to expand...
Click to collapse
Many thanks for your tutorial!!
I have exactly the same problem with my unit, my dealer was Mekede but now they doesn´t answer me
Where i can buy a new display ¿? i have a MTCB KGL RK3066 unit with 7" inches
Thanks for your attention
hi. i use joying headfor ford focus /rk 3188 unit and status bar doesnt work properly. pls help me for buying new digitizer
You would think one of these guys would be smart enough to sell PARTS for these units like digitizers, LCD's, front control panels (when the buttons/knobs break), replacement CPU boards, bluetooth boards, etc... they would probably have a pretty good amount of sales.
They are leaving some money on the table they could be making with little effort.
I still looking for the digitizer without success....Does anyone know of any store that has them?
grumetecap said:
Many thanks for your tutorial!!
I have exactly the same problem with my unit, my dealer was Mekede but now they doesn´t answer me
Where i can buy a new display ¿? i have a MTCB KGL RK3066 unit with 7" inches
Thanks for your attention
Click to expand...
Click to collapse
HERE you have the store .https://es.aliexpress.com/item/For-...32781728320.html?spm=2114.13010608.0.0.Pb3j0V
---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------
robertut said:
Can you please give a link where you ordered your digitizer, please?
Click to expand...
Click to collapse
here you have the store.https://es.aliexpress.com/item/For-...32781728320.html?spm=2114.13010608.0.0.Pb3j0V
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
jzhuka said:
I need a digitizer for my KGL rk3066 unit, aka Naval 2. Any ideas where to order one from?
Thanks
Click to expand...
Click to collapse
here you have the store.https://es.aliexpress.com/item/For-...32781728320.html?spm=2114.13010608.0.0.Pb3j0V
Hi, I also have a KGL rk3066 unit, aka Naval 2 in need of a 7 inches 800 x 480 touchscreen/display replacement. The links you post are not working anymore, can you help me providing a new link?
Thanks
In need of assistants
Where can I order one of these digitizer?
veget83 said:
last weekend i have replaced my touch screen display damaged, and upgrade my KGL dual core cpu to RK3188 quad core:
I order display replacement and slot CPU from my vendor (25+75$)
Tutorial
1. wait delivery from china ...
2. remove 4 screws behind the panel of unit
3 remove 4 screws to pull up the display,remove the little orange connection of toch screen, then remove 2 svcrews and tape to slot cpu.
4 pull up display and disassemble by removing scotch tape.
5 replace the new touch panel, be very careful don't touch the glass on the inside...
6 lock the display with new scotch tape, re connect little orange connection on the inside
7 assemble all...
for new cpu need to download new ROM with rk3188 firmware like this: http://forum.xda-developers.com/showpost.php?p=60591423&postcount=12068
put on sd card and flash it...
no need to flash new MCU (is the same)
enjoy
Click to expand...
Click to collapse
Software
Where did you get your software?
pa.ko said:
Well, in meantime I again updated to v2.83 - from diff sorce - to repeat test. After few days - problem reappeared. With old version for almost month, cold weather etc, - no probs.
Just for anyone interested to know. I may be SW prob after all.
Click to expand...
Click to collapse
Hi ,
I have gionee s5.5 mobile phone. Its battery is all dead. I went to service center and he said there is small piece of touch screen which is broken, if we open it by using machine , it might get broken , so its advisable you replace the screen as well. Now, he wants to charge $90 for touch screen.
My touch screen works perfectly fine and I dont see a reason why should i replace it.
i want to ask experienced members here. What should i do? Thats the only way out? I should ask some more repair shops ? If some repair center can only replace my battery without replacing the whole touch screen. That should be awesome.
Thanks