Related
My Xperia Neo V does not turn on, just shows Sony Ericsson and is always doing a loop trying to start.
I've tried hard reset in 3 ways:
Volume Up + Power
Volume Down + Power
Back + Menu + Power
None of them worked.
I've tried using the PC Companion software to update, but nothing done with phone turned off.
I've tried installing a new kernel, but the phone is not recognized.
I do not know what I can do.
Is there any way to access the system folders in the internal memory via PC without turning the phone on?
Does anyone have an idea?
AFMA said:
My Xperia Neo V does not turn on, just shows Sony Ericsson and is always doing a loop trying to start.
I've tried hard reset in 3 ways:
Volume Up + Power
Volume Down + Power
Back + Menu + Power
None of them worked.
I've tried using the PC Companion software to update, but nothing done with phone turned off.
I've tried installing a new kernel, but the phone is not recognized.
I do not know what I can do.
Is there any way to access the system folders in the internal memory via PC without turning the phone on?
Does anyone have an idea?
Click to expand...
Click to collapse
Hi,
This is my suggestion:
first download FlashTool_0.2.9.1_FOTAUnbrick
http://www.multiupload.com/Q103V01CV1
Follow instructions (if u familiar with updating with sony ericsson pc companion, this u can do)
Turn of phone, do not connect get.
Simple, start FlashTool_0.2.9.1_FOTAUnbrick, click flash. Choose loader.sin on the right. Then click OK,
Hold in back button while Now connect phone with usb cable.
See its flashing, wait till it's done, unplug phone,. try to boot up phone.
Hope it helps. Helped me when i play to much with phone and brick it.
Thanks for the help, but I have my bootloader locked.
Instead I used SEUS and managed to reinstall the software.
Now I have to root again, but at lest the phone is back
Thanks for the help
AFMA said:
Thanks for the help, but I have my bootloader locked.
Instead I used SEUS and managed to reinstall the software.
Now I have to root again, but at lest the phone is back
Thanks for the help
Click to expand...
Click to collapse
Great Main thing u back on track!
Tip: bootloader do not need to be unlocked to use that tool.
I used it to fix bricked, before i unlocked mine.
But i'll guess it has to be rooted
Have a great weekend!
vargens said:
Great Main thing u back on track!
Tip: bootloader need to be unlocked to use that tool.
I used it to fix bricked, before i unlocked mine.
But i'll guess it has to be rooted
Have a great weekend!
Click to expand...
Click to collapse
The main reason for me not to unlock bootloader is to keep warranty.
Now that I have my phone back, sure it is going to be a great weekend
Thanks
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
mertmr said:
I tried to flash nAa kernel(unlocked bootloader successfully before) with flashtool and flastool said it succeed. When i reboot my phone it comes up with nAa kernel screen and reboots again. It goes into an infinite loop within rebooting phone, only showing nAa kernel splash screen, nothing more and reboot. I can reach to cwm recovery. I flashed the latest MiniCM7-2.2.0 custom rom and wiped user data/cache. Same problem remained.
I decided to go back the original stock kernel and rom via flashtool. You know the rest; you select the stock files then press ok then it says "oh, ungplug usb, power off, hold back button and plug in usb again". I did this steps several times but flashtool cant recognize my phone. Not even a blink. The weird thing is, when i power off my phone and plugin usb(not doing the holding back button thing) the green light is on(it is not offline charging i know it) same as it goes into flashmode. I tried flashtool again with hope but couldnt recognized phone again. Even S1 tool cant recognize my phone. It seems completly lost!
I tried hopelessly with Pc Companion and get the same result. I found a post about "Gordons Gate Driver" but couldnt get any result with that. No tool can recognize my phone in flashmode, in normal mode(talking about the infinite rebooting state, not even a blink from flashtool).
Im out of ideas, even out of google . Is there someone to provide me with new idea? Or is there something im missing? Please help.
Thank you for reading my adventure hope someone helps.
Click to expand...
Click to collapse
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
gandhar said:
back button is for x10 mini pro,
for my LWW and also mini it is volume down button to connect to flashtool.. try that
Click to expand...
Click to collapse
I even saw and tried that
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
mertmr said:
I even saw and tried that
Click to expand...
Click to collapse
does fastboot work?
singh_dd93 said:
You did not mention the model of your phone.
Always mention the model when posting.
In 2011 devices:
Press Volume DOWN key for flashmode(for flashing firmware via flashtool)
Press Volume UP key for fastboot mode(for flashing kernel)
Click to expand...
Click to collapse
I did mention that it is a mini pro in the title. Is there any other model info other than "mini pro", i dont know? I only know that it is a x10 mini pro.
I only know about back button thing, now trying the volume down key. Thanks for the tips.
gandhar said:
does fastboot work?
Click to expand...
Click to collapse
Nope, it didnt work too. I will give another shot, i guess.
--------------------
Edit: Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
mertmr said:
Nothing happens. When i plug my phone with holding button(back, volume up or down) green led turns on. But flashtool(or others) says nothing. By the way, computer cant detect my phone too.
Click to expand...
Click to collapse
this is the same computer that you used to flash the kernel right?
gandhar said:
this is the same computer that you used to flash the kernel right?
Click to expand...
Click to collapse
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
mertmr said:
Yes, it is.
By the way the weird thing happened. I changed the usb port i connect my phone and suddenly flashtool detected my phone! I flashed the orginal firmware and now it is working! Thanks for the efforts you gave.
Click to expand...
Click to collapse
yeah someone else too had a similar problem.. something about usb3.0
anyway congrats now
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Sent from my Xperia Mini using XDA
singh_dd93 said:
Congrats for your phone
There are 2 mini pro thats the reason i asked
1) x10 mini pro - released in 2010
2) xperia mini pro - released in 11
X10 series have a different forum
Click to expand...
Click to collapse
Ok, thanks for the info. I will be carefull about that.
Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!
Guys, i was upgrading the ROM but this time i used this software, UNIFLASH , it showed some cmd windows, later phone automatically booted to cwm, and then turned off! since then its not turning on neither blinking any LED! guys, please show me a ray , help me! phone is not getting recognized by flashtool either :'( and same with seus
try to hold down power + volume up at the same time until you get the phone to vibrate 3 times, after that try to boot or get it into flashmode with flashtool..
remember.. flashtool is the way to go !
kindly report back or even pm me
realfelix said:
try to hold down power + volume up at the same time until you get the phone to vibrate 3 times, after that try to boot or get it into flashmode with flashtool..
remember.. flashtool is the way to go !
kindly report back or even pm me
Click to expand...
Click to collapse
already tried that, googled a lot already, nothing is helping!
also tried doing what you said with USB connected through my pc, windows kept playing that system sound which comes up when we plus out a device! in particular time intervals, like 3 4 seconds.
bhuvangaur said:
already tried that, googled a lot already, nothing is helping!
also tried doing what you said with USB connected through my pc, windows kept playing that system sound which comes up when we plus out a device! in particular time intervals, like 3 4 seconds.
Click to expand...
Click to collapse
have you tried the fastboot method, it´s in android development, "all you need to know..."
try to flash official stock fw like .452 or .45 with flashtool..try to connect the phone in flashmode....hopefully everything will be alright...
PEACE
guys, phone is not able to boot in any mode, it be fastboot or flashmode! its completely dead thats what i meant earlier. After a lot of researching the whole night, i was able to figure out that the bootloader is that the UNIFLASH corrupted the bootloader. So how to fix that?
try this: make sure you have enough charge and the drivers of your phone are installed correctly. (flashtool drivers)
power+volume up wait till vibrates three times,
then connect your phone to pc.
run the flashtool and prepare the firmwares youre going to flash,
a screen will appear and says turn off your phone....etc
hold power button + volume up wait till vibrates three times
then quickly hold power button + volume down.
it will flash the firmware.
just keep on trying.
mharckk said:
try this: make sure you have enough charge and the drivers of your phone are installed correctly. (flashtool drivers)
power+volume up wait till vibrates three times,
then connect your phone to pc.
run the flashtool and prepare the firmwares youre going to flash,
a screen will appear and says turn off your phone....etc
hold power button + volume up wait till vibrates three times
then quickly hold power button + volume down.
it will flash the firmware.
just keep on trying.
Click to expand...
Click to collapse
its simply not vibrating! i held that combination for like 5 minutes continuous last night, phone has to enter either fastboot or flashmode for flashtool to detect! none of them is coming up, and no LED again when its on charging. complete dead complete mess!
By the way, anyone knows how service center people update the phone's software?
bhuvangaur said:
its simply not vibrating! i held that combination for like 5 minutes continuous last night, phone has to enter either fastboot or flashmode for flashtool to detect! none of them is coming up, and no LED again when its on charging. complete dead complete mess!
By the way, anyone knows how service center people update the phone's software?
Click to expand...
Click to collapse
Go to repair center or phone shop! These guys know how to rewrite ur bootloader through JTAG! Don't worry, u'll get it back once it's done!
Sent From my Lt26i, Hit thank whenever u like!
I think you hard bricked your device... Go to service centre ...
Sent from my LT22i using xda premium
i appreciate you guys for your replies! gave the phone to them yesterday, good to hear about JTAG, will surely revert here and let ya'll know about it! this might happen with any one in future, might help him too!
PS, since the company is no more ericsson based, new service center are SONY one only, where all sony products are welcomed, really good service center now! earlier it was sh*tty since years! i loved the experience this time
bhuvangaur said:
i appreciate you guys for your replies! gave the phone to them yesterday, good to hear about JTAG, will surely revert here and let ya'll know about it! this might happen with any one in future, might help him too!
Click to expand...
Click to collapse
would you please enplane what is JTAG and how it works ?
Had the same problem yesterday!
Maybe a noob advice but here what was my mistake: after switch off the phone with volume up, wait for like 30 second before trying to connect in flash mode. Though my phone was dead but just had to wait a little bit before trying the flash mode. Flashtool heal it!
Sorry for my poor english, I'm french and this is my first post, but I follow xda since a long time!
Bye!
Napolee said:
would you please enplane what is JTAG and how it works ?
Click to expand...
Click to collapse
It a type of connector that is use to connect directly to the phone mainboard. It use to transfer some specific data such as bootloader!
Sent From my Lt26i, Hit thank whenever u like!
this is hilarious!!! a replacement! brand new xperia s! yay!
Trying to Survive my LT26i
I have rooted my phone
put recovery and flashed my rom to xxperience
so everything was ok
using for 2days
so i saw how to overclocked to 1.8ghz and flash via cwm the kernel
after restart from cwm not either the screen turn on
just green light when i put cable on
and when i tried to flash via flash tool given error for error
so i done as say here to hold power + volume up, and the same
so i waited for a little time and try again and its flashing now...
hope it works
Hello to all!
I had my Xperia P hard bricked during CMW installation and I am trying hard to fix it by myself, because I believe I lost the warranty because of it ...
So I ask: is there anyone who can help me with a possible JIG Xperia P?
or any other option to reinstall android on my phone, because he is really dead! no recognition usb, no hard boot, no battery charging, no flashing lights....
nothing seems to work!!! ...
can anyone help me please?
Thank you in advance!
Alex
Alex Rocha said:
Hello to all!
I had my Xperia P hard bricked during CMW installation and I am trying hard to fix it by myself, because I believe I lost the warranty because of it ...
So I ask: is there anyone who can help me with a possible JIG Xperia P?
or any other option to reinstall android on my phone, because he is really dead! no recognition usb, no hard boot, no battery charging, no flashing lights....
nothing seems to work!!! ...
can anyone help me please?
Thank you in advance!
Alex
Click to expand...
Click to collapse
Bit more detail how you bricked it installing CWM. What exactly you done and where you get it from.
Try to shut it down, press power + volume up untill you feel (1+) 3 vibrations.
See if you can connect it in flash mode (connect usb to pc while you hold volue down), the led should turn green.
Xperia P hard bricked
ChikeD said:
Bit more detail how you bricked it installing CWM. What exactly you done and where you get it from.
Try to shut it down, press power + volume up untill you feel (1+) 3 vibrations.
See if you can connect it in flash mode (connect usb to pc while you hold volue down), the led should turn green.
Click to expand...
Click to collapse
First I'd like to thank's for your help ChikeD!
Well.... I was trying to install the new CM 11 Nightly Build - a custom ROM build on Android 4.4.2 KitKat- on my Sony Xperia P device
I had rooted succesfully and was seaching for an app on google play store to provide access to "recovery mode" that works with my LT 22i to finish the installation of this new rom... i tryed lot of apps, but no one worked... and so I've found this app "Recover X" from LEDelete developer.
after install and run, this app show me one option to get access to recovery mode... i dont remember exactly, but i saw somethig like "CMW......" on screen. after download, I tryed to reboot my phone and then its completly dead!! i'd tryed any kind of possibility pressing buttons dowloading softwares and more but my computers didn't recongize it when connect USB cable...
vol+ / power dont work, vol- / usb dont work, no charging indicator, no lights blinks, nothing works! it looks like a motherboard without any operational system...
And I saw in some websites that exist one JIG for Samsung devices that alows recovery phones with problems like mine... so i wonder if is possible to find some JIG for Xperia P or any other possibility of reinstallation of android system
I hope i made myself clear because I'm still learning this language... that means I'm sorry for my bad english in advice...
If there is anything that you can't understand, please let me know
Thank's a lot!
Alex
If you had asked before I would have told you Recovery X won't work, didn't work the 2 times I have tried it, but didn't brick my phone eithr.
To incatal CM you didn't neet to root or install CWM since you need to flash it's kernel anyway.
Is your bootloader unlocked?
Was the phone fully charged when it happened, did it start boot and then died or just went black?
Have you tried to hold the power + volume up for 10-15 minutes?
To reinstall firmware you need flash mode (volume down while connecting to USB), have you flashed with flashtool or PC Companion before?
ChikeD said:
If you had asked before I would have told you Recovery X won't work, didn't work the 2 times I have tried it, but didn't brick my phone eithr.
To incatal CM you didn't neet to root or install CWM since you need to flash it's kernel anyway.
Is your bootloader unlocked?
Was the phone fully charged when it happened, did it start boot and then died or just went black?
Have you tried to hold the power + volume up for 10-15 minutes?
To reinstall firmware you need flash mode (volume down while connecting to USB), have you flashed with flashtool or PC Companion before?
Click to expand...
Click to collapse
Yes i had reinstalled twice by flash tool and pc companion, holding vol down while connecting to USB, because the device was with very low performance.
When i was trying to get rebooted on "recovery mode" before the black screen, my battery was on 85%....
Yesterday i tried to do "hard reboot" holding the power + volume up for 50 minutes and nothing....
Actually what i really need is find a way to get some response of the system of this phone (by connecting in some jig, or doing something with the software or even the hardware...), because if my computer recognize the phone, i do believe that i'll can handle with reinstallation... in other words, my challenge now it's only get out from the black screen for any other operational response
One of my ideas is unmount rear cover and try to disconnect the battery cord for 10 minutes and see if something changes... but i'm fully opened to new ideas
I really believe that i'll succeed on this case with yours precious help!!
Thank you again for your assistance!
Alex
Alex Rocha said:
One of my ideas is unmount rear cover and try to disconnect the battery cord for 10 minutes and see if something changes... but i'm fully opened to new ideas
I really believe that i'll succeed on this case with yours precious help!!
Thank you again for your assistance!
Alex
Click to expand...
Click to collapse
It might, worked for this guy http://forum.xda-developers.com/showthread.php?t=2628715&page=2
ChikeD said:
It might, worked for this guy http://forum.xda-developers.com/showthread.php?t=2628715&page=2
Click to expand...
Click to collapse
Well... unfortunately remove the power cord did not worked... no changes! i confess that i was betting on this procedure... but ok! Let's keep searching for a new option!
Best regards!
Alex