Some roms have a mod which allow to change csc at will . But i actually installed the Wanamlite Rom (XXDLJ4) and the csc is OXA (Open Europe ?) I'm interrested of changing this csc with a XEF one.
I've tried the *#272*IMEI# but it doesn't work (=>'Unknow application' message)
Same problem with 'sgs csc select' from appstore.
This rom is 'multicsc' (+120 !) => So How can i change it ? (I notice that XEF folder is in System/csc one but i can't copy the content of XEF folder )
Excuse me for my poor english.. but i'm just a froggy noob:silly:
Download csc changer from playstore
Sent from my GT-I9300 using xda app-developers app
Just remember it wipes your phone when changing csc
Hi,
That's it:
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=pt_BR
[]'s
Just enter the first part of the IMEI, without the last separate two digits.
unholygid said:
Download csc changer from playstore
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply but I can't see any 'CSC changer' from playstore => there is 'Samsung Galaxy s/S2/S3 CSC' by Manniak which only works on stock rom (I tried it with my custum one : I can select my XEF but after reboot, i'm still in OXA csc )
Another one is CSC Selectorby Laucass wich redirects me on the dialer with code *#272 .... => doesn't work ('Unknown application')
Is ther another place where i can take this 'CSC Changer' ? Or is it possible to only flash the csc I9300XEFDLJ2 (via sammobile) on my WanamLite (XXDLJ4) ?
Or perhaps is there no interest to switch from OXA to XEF ? (I Thought that it was better for voice recognition for example)
tweetatoo said:
Just enter the first part of the IMEI, without the last separate two digits.
Click to expand...
Click to collapse
There is 15 numbers in my IMEI => does it mean I have to enter only 13 numbers? .. tried... no success
slaphead20 said:
Just remember it wipes your phone when changing csc
Click to expand...
Click to collapse
Thanks for that info, great help
Shuppa said:
Thanks for your reply but I can't see any 'CSC changer' from playstore => there is 'Samsung Galaxy s/S2/S3 CSC' by Manniak which only works on stock rom (I tried it with my custum one : I can select my XEF but after reboot, i'm still in OXA csc )
Another one is CSC Selectorby Laucass wich redirects me on the dialer with code *#272 .... => doesn't work ('Unknown application')
Is ther another place where i can take this 'CSC Changer' ? Or is it possible to only flash the csc I9300XEFDLJ2 (via sammobile) on my WanamLite (XXDLJ4) ?
Or perhaps is there no interest to switch from OXA to XEF ? (I Thought that it was better for voice recognition for example)
Click to expand...
Click to collapse
Pb still not resolved
Nobody tried to change CSC with WanaMLite Rom ? (or other multi csc custom rom )
Change csc to do what?
Striatum_bdr said:
Change csc to do what?
Click to expand...
Click to collapse
Sure, It's THE question . I've seen in other thread that the csc had its importance for the voice recognition ? (I'm french) ... Perhaps It's wrong .
But why is there a csc for each country then ?
Ok , i think i've found an answer : http://forum.xda-developers.com/showthread.php?t=1671969
It does' nt seem to be useful for me to switch to XEF one.
thanks to all of you
Related
I wondered if anyone tried the new available ROM here:
http://vsg.viewsonic.com/ViewPad7/
FM6-3350-0-1008-A01.nb0
Should be 2.2.x - but what else in the changelog?
Which languages are available?
Sadly mine is out for repair of the display
i'll try this after downloading...
android v2.2.2
Languages in this rom:
English, Espanol, Francais
Amalgation said:
android v2.2.2
Languages in this rom:
English, Espanol, Francais
Click to expand...
Click to collapse
Amalgation, can you upload the stock recovery ROM? It is required to flash nb0 files with SUTL, right?
LayZeeDK said:
Amalgation, can you upload the stock recovery ROM? It is required to flash nb0 files with SUTL, right?
Click to expand...
Click to collapse
Actually it's not, with the latest provided recovery (elsewhere in the dev forum) you can also flash with SUTL. the viewpad will reboot into recovery first and after a few seconds switch to fastboot.
This "new" factory stock ROM should be for newer ones with ITE hardware - great for "experimenting" with custom ones - from now on, nice to have the ability to restore it for warranty exchange, etc. etc.
And, yes, I can confirm that the SUTL will quickly flash the *.nb0 file - making it as good as new again.
swype is the only diffrences i think... so far...
Interesting thought Viewsonic wont release any new official ROMs for Viewpad7 hmm wow I was wrong
Wonder what more is there opposite Swype hmm for sure there have to be something enhanced worth updating?
Sadly no european languages included...
astuermer said:
Sadly no european languages included...
Click to expand...
Click to collapse
ehehe how is that not European languages?are this American languages or asian?hmm
Amalgation said:
android v2.2.2
Languages in this rom:
English, Espanol, Francais
Click to expand...
Click to collapse
But from other side understand and would like to see some more languages...
has anyone actually run this yet, if so what does it say in the about phone section,
as i already seem to have android 2.2.2 this is what i currently have,
model number
viewpad7
android version
2.2.2
baseband version
PR3.7_128
kernal version
apps_2.6.32.9
build number
4027_3_420
it just i now have my TP working how i want it, well till i can overclock it and add flash, as i dont use swipe if there is no other changes then there is no real need for me to update.
zbig0 said:
ehehe how is that not European languages?are this American languages or asian?hmm
But from other side understand and would like to see some more languages...
Click to expand...
Click to collapse
Hehe, sorry... read a bit too fast.
Another stock rom had only English and Chinese as integrated languages.
A rom with german language would be nice to have...
I ve got an HWver 106, model FM6-0001, SWver 3.16R device whose ABOUT reads:
model number :viewpad7
android version: 2.2
baseband versionR3.7_128
kernal version: apps_2.6.32.9
build number: 4027_3_16R.
As my language is Spanish, i will not notice the lack of other european languages.
Shall I upgrade to this 2.2.2 ROM?
any changelog from 2.2 besides swype kboard?
thanks
What the files mean? WHat differences?
FM6-316Q-0-1008-A01.nb0
FM6-3310-0-5029-A02.nb0
FM6-3350-0-1008-A01.nb0
SUTL2.1_v1.8.4.zip
SUTL3_v1.6.5.zip
SUTL3_v1.7.9.zip
SW_3.310_P1_20110201_VSI.zip
kocir said:
What the files mean? WHat differences?
FM6-316Q-0-1008-A01.nb0
FM6-3310-0-5029-A02.nb0
FM6-3350-0-1008-A01.nb0
SUTL2.1_v1.8.4.zip
SUTL3_v1.6.5.zip
SUTL3_v1.7.9.zip
SW_3.310_P1_20110201_VSI.zip
Click to expand...
Click to collapse
hi
below are ROms
FM6-316Q-0-1008-A01.nb0
FM6-3310-0-5029-A02.nb0
FM6-3350-0-1008-A01.nb0
Below is the tool to flash the same
SUTL2.1_v1.8.4.zip
SUTL3_v1.6.5.zip
SUTL3_v1.7.9.zip
SW_3.310_P1_20110201_VSI.zip
u need to use the above tool and flash the rom via ur PC
which rom for ur pad & which SUT to use i dont know
can any one help on the same
haree said:
hi
below are ROms
FM6-316Q-0-1008-A01.nb0
FM6-3310-0-5029-A02.nb0
FM6-3350-0-1008-A01.nb0
Below is the tool to flash the same
SUTL2.1_v1.8.4.zip
SUTL3_v1.6.5.zip
SUTL3_v1.7.9.zip
SW_3.310_P1_20110201_VSI.zip
u need to use the above tool and flash the rom via ur PC
which rom for ur pad & which SUT to use i dont know
can any one help on the same
Click to expand...
Click to collapse
I have tried to install from SD card under name "firmaware.nb0" but no one were accepted. I will try to do via PC .
---------- Post added at 02:32 PM ---------- Previous post was at 02:17 PM ----------
I did via PC. It is working.
FM6-3350-0-1008-A01.nb0 + SUTL3_v1.7.9.zip
******************************************************************
******************************************************************
Unfortunately I do not have czech localization. Is there any way how to extract czech localization from Android 2.2.2: and copy to Android 2.2.2. ?
******************************************************************
******************************************************************
P.S.:
I have tested all of them:
FM6-316Q-0-1008-A01.nb0 (Working Mobile internet) (ENG,ESP,FRA) (Swipe) A.2.2 (!!!)
FM6-3310-0-5029-A02.nb0 (Working Mobile internet) (ENG,GER,FRA + many Asian) (TouchPal) A.2.2.2.
FM6-3350-0-1008-A01.nb0 (Working Mobile internet) (ENG,ESP,FRA), (Swipe) A.2.2.2.
kocir said:
FM6-3350-0-1008-A01.nb0 (Working Mobile internet) (ENG,ESP,FRA), (Swipe) A.2.2.2.
Click to expand...
Click to collapse
That version also worked with your non-ite touchscreen???
Which one did you keep, and you flashed all nbo files with SUTL or CWM???
BTW how did you backup your apps? Titanium?
> FM6-3350-0-1008-A01.nb0 (Working Mobile internet) (ENG,ESP,FRA), (Swipe) A.2.2.2.
Yes, I have used this one.
> That version also worked with your non-ite touchscreen???
I do not know, what "non-ite" means
> Which one did you keep, and you flashed all nbo files with SUTL or CWM???
I have used one version of SUTL from the link. What is CWM? WHat difference?
> BTW how did you backup your apps? Titanium?
Yes, I used Titanium.
astuermer said:
I wondered if anyone tried the new available ROM here:
http://vsg.viewsonic.com/ViewPad7/
FM6-3350-0-1008-A01.nb0
Should be 2.2.x - but what else in the changelog?
Which languages are available?
Sadly mine is out for repair of the display
Click to expand...
Click to collapse
Hi folks does anyone have a link to download above stock rom or if anyone could upload it somewhere I would be very thankful! I have searched all over but could not find anywhere, I found all other versions but looks like my viewpad works on that one.
Resident said:
Hi folks does anyone have a link to download above stock rom or if anyone could upload it somewhere I would be very thankful! I have searched all over but could not find anywhere, I found all other versions but looks like my viewpad works on that one.
Click to expand...
Click to collapse
Resident - "you got mail"
Please check your PM on status of your request.
Hi,
I just installed 4.0.4 stock firmware and I rooted it.
I would like to add arabic as supported language. I tried to do it this way :
http://forum.xda-developers.com/showpost.php?p=30314323&postcount=3
But modifications on language.xml file won't register. I tried with Droid explorer,it failed. Then using this method :
http://www.jayceooi.com/2011/06/12/how-to-edit-root-file-on-android-the-free-way/
it failed too.
Can somebody tell me if this is the correct method to add arabic and how to modify stock rom files?
Thanks a lot
Patience is key : )
Have you tried performing the changes using Root Explorer in RW mode?
If you really cannot get it to work, you can just flash a stock unbranded ICS ROM which comes with Arabic by default.
prank1 said:
Have you tried performing the changes using Root Explorer in RW mode?
If you really cannot get it to work, you can just flash a stock unbranded ICS ROM which comes with Arabic by default.
Click to expand...
Click to collapse
Thanks a lot. I added the ar_AE and it works.
But when I add ar here :
Code:
<SamsungMobileLanguage>
<LanguageSet>
<Display>
ar_AE;en_GB;en_US;en_AU;en_IE;en_NZ;en_ZA;ko_KR;de_AT;de_CH;de_DE;fr_FR;fr_CH;
bg_BG;cs_CZ;da_DK;el_GR;es_ES;et_EE;fi_FI;ga_IE;hr_HR;hu_HU;is_IS;it_IT;
lt_LT;lv_LV;mk_MK;nb_NO;nl_NL;nl_BE;pl_PL;pt_PT;pt-rBR;ro_RO;sr_RS;sv_SE;tr_TR;
ca_ES;eu_ES;gl_ES;kk_KZ;ru_RU; sk_SK; sl_SI; uk_UA; uz_UZ;
az_AZ; hy_AM; ka_GE;
es_US; pt_BR; in_ID; ja_JP; vi_VN; zh_CN; zh_TW;
ar_AE;ar_IL;fa_FA;ur_PK;iw_rIL;th_TH;
</Display>
<Input>
<SupportList>
en_GB;en_US;az;ca;cs;fr;gl;tr;uk;ko;hy;bg;[COLOR="Red"]ar[/COLOR];fa;ur;iw;ja;th;vi;zh;
</SupportList>
<EnableList>
</EnableList>
</Input>
</LanguageSet>
</SamsungMobileLanguage>
I don't have the arabic Keybord. Did I missed something? (I also tried with ar_AE)
If I want a Stock ICS with Arabic and French support, which one do you advise me to chose?
Thanks.
Aryo.b said:
Thanks a lot. I added the ar_AE and it works.
But when I add ar here :
Code:
<SamsungMobileLanguage>
<LanguageSet>
<Display>
ar_AE;en_GB;en_US;en_AU;en_IE;en_NZ;en_ZA;ko_KR;de_AT;de_CH;de_DE;fr_FR;fr_CH;
bg_BG;cs_CZ;da_DK;el_GR;es_ES;et_EE;fi_FI;ga_IE;hr_HR;hu_HU;is_IS;it_IT;
lt_LT;lv_LV;mk_MK;nb_NO;nl_NL;nl_BE;pl_PL;pt_PT;pt-rBR;ro_RO;sr_RS;sv_SE;tr_TR;
ca_ES;eu_ES;gl_ES;kk_KZ;ru_RU; sk_SK; sl_SI; uk_UA; uz_UZ;
az_AZ; hy_AM; ka_GE;
es_US; pt_BR; in_ID; ja_JP; vi_VN; zh_CN; zh_TW;
ar_AE;ar_IL;fa_FA;ur_PK;iw_rIL;th_TH;
</Display>
<Input>
<SupportList>
en_GB;en_US;az;ca;cs;fr;gl;tr;uk;ko;hy;bg;[COLOR="Red"]ar[/COLOR];fa;ur;iw;ja;th;vi;zh;
</SupportList>
<EnableList>
</EnableList>
</Input>
</LanguageSet>
</SamsungMobileLanguage>
I don't have the arabic Keybord. Did I missed something? (I also tried with ar_AE)
If I want a Stock ICS with Arabic and French support, which one do you advise me to chose?
Thanks.
Click to expand...
Click to collapse
If you cannot get that to work, then I would recommend ROM version I9300XXBLG8 - UK. Get it from here: http://forum.xda-developers.com/showthread.php?t=1646610
This does contain arabic fonts (joined) & keyboard, but after flashing this ROM if you have any problems with mobile internet then you will need to flash the correct CSC to your device.
If
prank1 said:
If you cannot get that to work, then I would recommend ROM version I9300XXBLG8 - UK. Get it from here: http://forum.xda-developers.com/showthread.php?t=1646610
This does contain arabic fonts (joined) & keyboard, but after flashing this ROM if you have any problems with mobile internet then you will need to flash the correct CSC to your device.
If
Click to expand...
Click to collapse
Ok I think I'll do that.
So If I summarize : If I flash the Rom you advised me and then I chose the correct CSC of my region, I will have all further updates from Samsung? And if I have to send back my phone to Samsung for some reason, I will not have any problem? What about the unlock? Will this firmware lock back the phone again? Can I restore safely all System Data and apps from a TitaniumBackup backup?
Thanks a lot for your help.
Aryo.b said:
Ok I think I'll do that.
So If I summarize : If I flash the Rom you advised me and then I chose the correct CSC of my region, I will have all further updates from Samsung? And if I have to send back my phone to Samsung for some reason, I will not have any problem? What about the unlock? Will this firmware lock back the phone again? Can I restore safely all System Data and apps from a TitaniumBackup backup?
Thanks a lot for your help.
Click to expand...
Click to collapse
Please I just need confirmation.
just download this file from my post and extract it- use root explorer and replace the files in this path
system/csc and all will work arabic rom and arabic keyboard
http://www.mediafire.com/?fh9fgca7qqth17u
kakyyabata said:
just download this file from my post and extract it- use root explorer and replace the files in this path
system/csc and all will work arabic rom and arabic keyboard
http://www.mediafire.com/?fh9fgca7qqth17u
Click to expand...
Click to collapse
Thanks Kakyyabata, it added indeed the arabic language, but not the keyboard. Even when I select the arabic language as default...
Aryo.b said:
Thanks Kakyyabata, it added indeed the arabic language, but not the keyboard. Even when I select the arabic language as default...
Click to expand...
Click to collapse
I know that I can add the arabic keyboard using an app, but seriously, this cannot be done on any stock firmware?
hi..
Guys..
just for sharing, there is any news for update firmware I9300XXDLJ1 (malaysia).I've found most of this version facing trouble with sms.Not working at all even to open the app.some of user FC and turned black when touch the sms icon..
I hope can get new firmware update A.S.A.P.
Try to clear the cache and data of the messaging app. Otherwise, use titanium backup to clear all messaging data. If that fails, do a factory reset.
I'm using the same Malaysian rom as well and there are no force closes in the messaging app.
zaki aziz said:
hi..
Guys..
just for sharing, there is any news for update firmware I9300XXDLJ1 (malaysia).I've found most of this version facing trouble with sms.Not working at all even to open the app.some of user FC and turned black when touch the sms icon..
I hope can get new firmware update A.S.A.P.
Click to expand...
Click to collapse
Weird. I'm on DLJ1 as well but no trouble with sms app. Phone app takes quite long to load sometimes. Did you do an ota update? Maybe you could try a clean install of the stock rom if nothing else works.
disclaimernotice said:
Try to clear the cache and data of the messaging app. Otherwise, use titanium backup to clear all messaging data. If that fails, do a factory reset.
I'm using the same Malaysian rom as well and there are no force closes in the messaging app.
Click to expand...
Click to collapse
Thx lot gimme quick reply...
unfortunately, i already suggest to do that way..but most of them still stuck when tryin to access sms app..but i'm lucky didn't get such prblm cz i'm using i9300XXELK4..
Try To check With *#1234# on dialer To See if you got any csc selected. If Not SMS app Will fc.
Inviato dal mio GT-I9300
corgar said:
Try To check With *#1234# on dialer To See if you got any csc selected. If Not SMS app Will fc.
Inviato dal mio GT-I9300
Click to expand...
Click to collapse
actually i didn't get it..which CSC are selected ?.or u mean CSC must be same (CSC-I9300OLBDLJ1)..
Well, i try to find out..
anyway, thx a lot..
zaki aziz said:
actually i didn't get it..which CSC are selected ?.or u mean CSC must be same (CSC-I9300OLBDLJ1)..
Well, i try to find out..
anyway, thx a lot..
Click to expand...
Click to collapse
what is your baseband? and i wonder what line(telco) are you using?
StormRoBoT said:
what is your baseband? and i wonder what line(telco) are you using?
Click to expand...
Click to collapse
actualy some of my friends s3..they used telco (celcom)..they get JB out of the box..
u mean service provider might the reason ?..but already do manual setting for apn, dns n service centre num..as inf.by some xda senior it should be bugs on firmware..
Sent by my Samsung Galaxy S III
i9300XXELK4, Siyah Kernel v1.7
GT-I9100 - Spain
PDA: I9100XWLS8
CSC: I9100FOPLS3
Version: 4.1.2
Date: 2013-01-16
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Deodexed, zipaligned and rooted with Chainfire's superuser su 0.99 and busybox 1.20.2.
Added ripple effect in framework-res.apk
Code:
Working folder information
Android OS version : 4.1.2
Device : GT-I9100
Model : GT-I9100
ROM Name : JZO54K.I9100XWLS8
CSC version : I9100FOPLS3
Rooted (Superuser app + su) : YES
Rooted (unsecured boot.img) : NO
BusyBox installed : YES
BusyBox run-parts support : NO
Apps2SD (Apps to EXT) enabled : NO
/data/app enabled : YES
Custom boot animation allowed : YES
Nano text editor installed : NO
Bash shell support : NO
/system/framework is deodexed : YES
/system/app is deodexed : YES
modem.bin found : YES
ROM will wipe all data : NO
Download from:
https://www.wuala.com/Tedascuen/Galaxy S2/?key=CjKcrbzC84Go
Original thread:
http://www.htcmania.com/showthread.php?t=536565
Thx a lot
What is better...? The original or the Deodex version...?
how can i manually deodex xwls8 firmware??
Thanks brother.
Sent from my GT-I9100 using xda premium
Thanks a lot
I go on Samfirmware and hop already deodex here
burninghouse said:
how can i manually deodex xwls8 firmware??
Click to expand...
Click to collapse
anybody..... pls
How I flash the deodex version...? With CMW....?
burninghouse said:
anybody..... pls
Click to expand...
Click to collapse
just search and u will get lot of ' how to deodex stock firmware' Guides over here
burninghouse said:
how can i manually deodex xwls8 firmware??
Click to expand...
Click to collapse
The only way i know is using dsixda kitchen....but for that you need to learn how to install and work with it...
Cheers
EDIT: silly me. works fine
Thanks a lot and from neatrom I can see a difference in tapatalk a lot more smoother !
Envoyé depuis mon GT-I9100 avec Tapatalk
I've just installed this Rom, and i'm going to test it! Thanks a lot!
XorPP said:
I've just installed this Rom, and i'm going to test it! Thanks a lot!
Click to expand...
Click to collapse
anyone make it to torrent?
Thanks a lot man i really needed this as in my college of the sites are blocked and you uploaded it on wuala which wasnt blocked ..! thanks again !!
Thank you for the Deodexed XWLS8 stock. Downloading!
Thanks a lot works fine
Flash in CWM or via Odin?
is this update or wipe? I´m on XXLS6 also from samfw.
thanks!
Kitchen has just finished was going to post it but you beat me to it
Sent from my GT-I9100 using Tapatalk 2
Hi guyz , i moved to an SGS3 I9300 and i want to know how to change the Dialpad format , it shows me american format or another format that i use in my country ( Example : My country format is XXXX XXX XXX and i have XXX XXX XXXX ) how to change it ? i changed the language but still nothing any ideas? Thanks in addvance
Still nobody? Ok , here's another example it's that possible to remove that space?
Bump , nobody?
I've seen a post about this once before, so worth a search
I searched but nothing ... i think nobody have the answer for my question , searched on google , still nothing ..
Check your language in settings, it might be set to English (US) try change to UK and reboot....or whatever language applies
Nope , still the same , every language i choose the result is the same ..
Any ideas or i shpuld give up?
Sent from my GT-I9300 using xda app-developers app
Try to download a third party dialer and see if the phone format is still I the US format. If it it's, your problem lies within the firmware or your ROM, if it's your European format, try to find the stock .ZIP for your dialer and replace it with another (assuming you have CwM root)
Samsung Galaxy S3
T-Mobile (SGH-T999)
Android ICS 4.0.4
Stock firmware
Stock kernel
Clockworkmod ROOT
Unlimited TLK + TXT + Data Family
16 GB internal
32 GB external
Sent via XDA Premium [HD] on Android.
FlorinSVJ said:
Any ideas or i shpuld give up?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I know for a fact it can be done, I'm just not sure how but I have definitely seen it,I wonder if it's csc related?
Yes , that's my calling screen this problem piss me off when somebody ask for a number from my phonebook
R: Changing dialpad format on SGS3
Have u tried changing the locale(where u are)?
That might be the problem...
Sent from my GT-I9300 using xda app-developers app
killbubble said:
Have u tried changing the locale(where u are)?
That might be the problem...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Changing the locale? Can you explain more please? I changed back to my default language (Romanian) but still nothing ... the locale means default language?
R: Changing dialpad format on SGS3
Locale means where you are living in that moment...for example: i live in italy and my locale is italian, i can put my phones language in english but if i connect to the store i will connect to the italian one.
If i change my locale to english, i will make my phone think really live in america/uk and it will conmect to american google play, and behave the same way for all other apps as well.
On the s3 apps for changing the locale usually change the language as well(thats because u can also do it in settings, but since i do not like to remember where to do it i use a little app to make my life easier).
The app i use to change my locale is called "localepicker" and i found it on the web, so just search it. But i am aware there is a more famous app that does the same thing and you can get it off the store, dont know the name thou....
Sent from my GT-I9300 using xda app-developers app
Ok then , i installed an application called "Raygional" i changed my locale to romanian and romanian on the market too , still no result dialpad the same ..
Alternatively you can edit it in.buildprop with a root explorer, ....didn't think about changing locale, well spotted :thumbup:
slaphead20 said:
Alternatively you can edit it in.buildprop with a root explorer, ....didn't think about changing locale, well spotted :thumbup:
Click to expand...
Click to collapse
I didnt have any root explorer , only the default file explorer , and no root ( i don't want to lose warranty )
R: Changing dialpad format on SGS3
Ive searched the web very briefly and it seems there is no direct way to do this if not with third party apps (some people say that going into keyboard and language prefs and changing language to uk english fixes this),(slapheads suggestion seems the best one, if ure worried about the warranty dont be cause u can unroot ur phone whenever u want, or if u completely mess up the system and want to send it in for fixin u just need to mess around with it even more so that a industrial technician would not be able to even read fron the phone if not by completely rebuilding the system himself and therefore deleting any root data or stuff...but thats a situation ull most likely not run into).
it looks like a third party app might be rocketdial...
Sent from my GT-I9300 using xda app-developers app
Thanks for the answer guyz , actualy wich make me think it's that thing ,when i was bought the phone was completly without that space and the dialpad was normal that's what it's really interesting , should i restore it and when it asks me to change the default language should i go for british ? not romanian or american english should i try? what do you think? i don't want to lose my apps too
R: Changing dialpad format on SGS3
I think u should root...personally- after all its not like ios (where thru jailbreak u need to mod the system thus adding stuff to it and making it, even if slightly, slower) on android instead u just want to ACCESS the already existing superuseraccount and use it yourself(whole process called root on android), what i mean is it doesnt slow down ur phone at all, instead it can be used to make it faster.
If u dont want to root the solution would be....i dunno maybe reverting back to an old rom through kies but ive no idea how to do that.
What i suggest is to root and either follow slapheads instructions or flash a new rom man(dont forget to make a titanium backup so u get all ur apps back), in that case u fix your problem
PLUS u get the new smoother android sensation all custom rom users get when they start using a rom where all useless stock processes/apps have been removed...
Sent from my GT-I9300 using xda app-developers app