[Q] Home Key wrong Mapping problem - Android Q&A, Help & Troubleshooting

I have got my Note II rooted and flashed the Android Revolution HD Rom.
Everything was fine and it worked smoothly.
But after installation of many apps, a problem turned out yesterday:
The menu button function has been mapped to the home button, which means when I pressed the home button, it will detected as menu button instead.
After that, I use the KEY TEST in the CWM Recovery to test the key setting.
I found that the home button is wrongly detected as the menu key. (It returns the same Code 139 when I pressed the two buttons)
the result shown as attached
How can I fixed this problem by reset the hard key map setting?
Please Help
Thanks so much!

Related

How to a hard reset on thc s740?

hi
my htc s740 is dead...
How to a hard reset with the keyboard?
when I press power button the ppc it blocks at written "windows mobile 6.1", if I attend some minute, it exits to me outside a shielded white screen whit this word: "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings.
if I press SEND key it does not succeed nothing
while off, press and hold vol down and center nav key, then power button.
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
great!!is ok! thanks.....
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
hey m8!
Thanks for the solution. i had hardtime doing it thou!!! if you encounter problems. press and hold vol down and center nav key BUT when it comes to power; just dot it. anyway maybe it's just me who did the stupid thing of holding power (well it works for the diamond so i thought...)
anyway thanks goes to ombre33
HTS Rose
R.0.24.30.24
G.12.23.30.06W
D.1.14.00.00
Peace
V
Does not work for me...
My Rose Keyb is not responding, I changed something in the registry and now I can no longer use both Keyb, I remove the battery, try the hard reset button stuff does not work, any ideas ?
sorry edit
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
thnx! it works!
Strange.
Very strange! After doing the procedures, the rose ask to do the reboot and stop in logo of HTC. I had never happened me in any pda.
Now what i do?
You have to wait about 4-5 minutes then Rose will reboot again and will install the additional software.
1. From the Home screen, press the Start button.
2. Press More
3. Select Accessories
4. Select Clear Storage
5. You will be prompted to enter a code, enter 1234
I had the same probleem, my HTC S740 freezes after reboot with the HTC logo screen. I tried the follwoing and it worked:
- press and hold vol down and the navigation key
- pres and release directly the power botton
- a messege will apear, press the navigation key.
- the device will reset to factory settings
- a messege appear asking to press vol up to restart
- device will restart and begin reinstalling the software, reboot after then.
May i ask what are the applications (that came installed with the phone) that are gone with the hard resetting ?
Thanks
HTC s740 backup before reset
hi...i would like to know if there is anything one can do to back the information up before resetting the Phone as i have crucial Data i cant affort to loose. PLS HELP!?
There are few backup softwares which can backup almost everything on your phone, and you can easily recover it after hard reset. I personally use Sprite Backup, which is probably the best one.

Boots only in recovery

Last nigt i rebooted my phone to recovery to reflash ROM,did it and now it only boots in recovery even if im not pressing menu key...I could boot to download but without pressing menu key so i flashed stock firmware but still it only boots in recovery.When im in recovery i can move UP,DOWN using volume keys but menu key does not work,when i press it nothing happens...i think that that menu key is somehow stuck but it works normally when i press it i can hear "click" that makes but does nothing.
Got CWM 5.0.2.8 and run key test all keys work(volume up,down,menu key,back key) except main menu key got nothing on output when pressed main menu key
bump

[Q] Lenco TAB-812 Locked - How to reset ?

Hi,
I ve a Lenco TAB-812 which was locked by kids, unfortunatly, the google account linked to unlock it does seems to be valid anymore.
So i ve tryed to hard reset it, with power - volume down key combo. It boot to the android reset menu, but once the menu is displayed, i can't validate the choice.
There is only three button on this tab + the power button : volume up to move cursor up in the menu, volume down to move cursor down, and the home key on the front which show or hide the menu...
I ve tryed many combo with power + another key to try to validate the selection but without success.
So i ve tryed to reflash it, but lenco didn't provide the rom ... even when requested by email
"If your tablet is locked please bring it back to your reseller and he will send it back to us. The only way to wipe the data is with a adb shell from your computer (while in recovery mode) but we do not support this and can't give you any information about this procedure.
Unfortunately there is no other rom available for this device."
Any ideas ?
thanks

[Q] Micromax canvas A116 pattern locked, SPFlash tool is not detecting device!!

My little bro drawn the unlock pattern one too many and now its locked with too many pattern attempts.
Unfortunately my mobile data was in OFF mode. So, couldn't connect using google account.
Tried to Factory Reset, with possible Select keys for Wipe Data/FactoryReset ::
1. Left and right touch keys simultaneously for some seconds (as listed in micromax website)
2. Left and Middle touch keys simultaneously for some seconds (seen in some threads)
3. Long press volume + key ( seen in some threads)
4. Or any other possible touch and keys combo...
doesn't work at all for my device.
SOS:: Any idea how to select the WipeData option in Recovery mode?
.
Downloaded Stocked ROM 4.2.1 and other needed drivers to Flash my device, listed in some threads in this site.
But device is not detected in SPFlash tool. How to make it detected?
Please Help *** Unfortunately there is no Micromax service center in my state ***
pritam99 said:
My little bro drawn the unlock pattern one too many and now its locked with too many pattern attempts.
Unfortunately my mobile data was in OFF mode. So, couldn't connect using google account.
Tried to Factory Reset, with possible Select keys for Wipe Data/FactoryReset ::
1. Left and right touch keys simultaneously for some seconds (as listed in micromax website)
2. Left and Middle touch keys simultaneously for some seconds (seen in some threads)
3. Long press volume + key ( seen in some threads)
4. Or any other possible touch and keys combo...
doesn't work at all for my device.
SOS:: Any idea how to select the WipeData option in Recovery mode?
.
Downloaded Stocked ROM 4.2.1 and other needed drivers to Flash my device, listed in some threads in this site.
But device is not detected in SPFlash tool. How to make it detected?
Please Help *** Unfortunately there is no Micromax service center in my state ***
Click to expand...
Click to collapse
bro! u r doing it wrong here's the procedure....
Switch Off your phone.
Press and hold Power button together with ‘volume +’ and ‘volume –’ buttons on the side of phone until you get two options.
Now, press the ‘volume +’ button to enter into the recovery mode.
This will make a Android icon appears on screen, press power button.
This will get you the menu options, use the volume up and down button to choose the option.
To select the option, you needs to simultaneously press two touch sensitive buttons on the bottom of your device, left button which is for the Menu and right button which is for going into previous stage. You have to do this for about 3 seconds.
Choose the wipe data/factory reset then press the enter button (left button which is for the Menu and right button which is for going into previous stage). Now, phone will get switch off and brings to its initial stage.
press thanks if i helped u!
Salman_nasu said:
bro! u r doing it wrong here's the procedure....
Switch Off your phone.
Press and hold Power button together with ‘volume +’ and ‘volume –’ buttons on the side of phone until you get two options.
Now, press the ‘volume +’ button to enter into the recovery mode.
This will make a Android icon appears on screen, press power button.
This will get you the menu options, use the volume up and down button to choose the option.
To select the option, you needs to simultaneously press two touch sensitive buttons on the bottom of your device, left button which is for the Menu and right button which is for going into previous stage. You have to do this for about 3 seconds.
Choose the wipe data/factory reset then press the enter button (left button which is for the Menu and right button which is for going into previous stage). Now, phone will get switch off and brings to its initial stage.
press thanks if i helped u!
Click to expand...
Click to collapse
Thanks mate.
What a relief.
Press thanks button to show ur appreciation dude that's best u can do!

Headset buttons wrong function since 6.0.1 (.575)

Hello everyone,
I did a full wipe of my Z2 and flashed a prerooted .575 recently. The headset buttons (Xiaomi Hybrid) has been working correctly until the update - first button was vol up, middle button play / pause and third button vol down.
Since the update to firmware .575 the layout is: first button vol down, middle button play / pause, third button app key.
When pressing the "app key" button, Sony Smart Connect gets opened and suggests me to install an app named "Smart Key". I don't want to use and I don't have any need for this app ... how can I restore the previous layout of the buttons?
Thanks for your help guys!
Cheers, Andi
edit: how is the behaviour on your Z2? is it as supposed?
seems to be related to this: http://forum.xda-developers.com/showthread.php?t=2452250
nobody an idea?

Categories

Resources