hi
my htc s740 is dead...
How to a hard reset with the keyboard?
when I press power button the ppc it blocks at written "windows mobile 6.1", if I attend some minute, it exits to me outside a shielded white screen whit this word: "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings.
if I press SEND key it does not succeed nothing
while off, press and hold vol down and center nav key, then power button.
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
great!!is ok! thanks.....
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
hey m8!
Thanks for the solution. i had hardtime doing it thou!!! if you encounter problems. press and hold vol down and center nav key BUT when it comes to power; just dot it. anyway maybe it's just me who did the stupid thing of holding power (well it works for the diamond so i thought...)
anyway thanks goes to ombre33
HTS Rose
R.0.24.30.24
G.12.23.30.06W
D.1.14.00.00
Peace
V
Does not work for me...
My Rose Keyb is not responding, I changed something in the registry and now I can no longer use both Keyb, I remove the battery, try the hard reset button stuff does not work, any ideas ?
sorry edit
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
thnx! it works!
Strange.
Very strange! After doing the procedures, the rose ask to do the reboot and stop in logo of HTC. I had never happened me in any pda.
Now what i do?
You have to wait about 4-5 minutes then Rose will reboot again and will install the additional software.
1. From the Home screen, press the Start button.
2. Press More
3. Select Accessories
4. Select Clear Storage
5. You will be prompted to enter a code, enter 1234
I had the same probleem, my HTC S740 freezes after reboot with the HTC logo screen. I tried the follwoing and it worked:
- press and hold vol down and the navigation key
- pres and release directly the power botton
- a messege will apear, press the navigation key.
- the device will reset to factory settings
- a messege appear asking to press vol up to restart
- device will restart and begin reinstalling the software, reboot after then.
May i ask what are the applications (that came installed with the phone) that are gone with the hard resetting ?
Thanks
HTC s740 backup before reset
hi...i would like to know if there is anything one can do to back the information up before resetting the Phone as i have crucial Data i cant affort to loose. PLS HELP!?
There are few backup softwares which can backup almost everything on your phone, and you can easily recover it after hard reset. I personally use Sprite Backup, which is probably the best one.
Hi,
since I have rooted my device (iMiTo AM801 running Android Gingerbread 2.3.1) I'm not anymore able to power off it properly.
After pressing for some seconds the power button and after I confirm the message asking if I want to power off the device, it never actually turns off and I need to press the reset button.
The problem is that quite often the reset button restart the device!! so I'm stucked.
PS: after I start the procedure for normal turn off (pressing the power button for some seconds, and answering the confirmation message) in the background I see a a message appearing just in the bottom toolbar of Android, but I cannot see what is says as the power off message is a modal window.
Any help, thanks in advance.
I solved this issue by installing one of the apps available on the Android market enabling to reboot the system.
I have got my Note II rooted and flashed the Android Revolution HD Rom.
Everything was fine and it worked smoothly.
But after installation of many apps, a problem turned out yesterday:
The menu button function has been mapped to the home button, which means when I pressed the home button, it will detected as menu button instead.
After that, I use the KEY TEST in the CWM Recovery to test the key setting.
I found that the home button is wrongly detected as the menu key. (It returns the same Code 139 when I pressed the two buttons)
the result shown as attached
How can I fixed this problem by reset the hard key map setting?
Please Help
Thanks so much!
My little bro drawn the unlock pattern one too many and now its locked with too many pattern attempts.
Unfortunately my mobile data was in OFF mode. So, couldn't connect using google account.
Tried to Factory Reset, with possible Select keys for Wipe Data/FactoryReset ::
1. Left and right touch keys simultaneously for some seconds (as listed in micromax website)
2. Left and Middle touch keys simultaneously for some seconds (seen in some threads)
3. Long press volume + key ( seen in some threads)
4. Or any other possible touch and keys combo...
doesn't work at all for my device.
SOS:: Any idea how to select the WipeData option in Recovery mode?
.
Downloaded Stocked ROM 4.2.1 and other needed drivers to Flash my device, listed in some threads in this site.
But device is not detected in SPFlash tool. How to make it detected?
Please Help *** Unfortunately there is no Micromax service center in my state ***
pritam99 said:
My little bro drawn the unlock pattern one too many and now its locked with too many pattern attempts.
Unfortunately my mobile data was in OFF mode. So, couldn't connect using google account.
Tried to Factory Reset, with possible Select keys for Wipe Data/FactoryReset ::
1. Left and right touch keys simultaneously for some seconds (as listed in micromax website)
2. Left and Middle touch keys simultaneously for some seconds (seen in some threads)
3. Long press volume + key ( seen in some threads)
4. Or any other possible touch and keys combo...
doesn't work at all for my device.
SOS:: Any idea how to select the WipeData option in Recovery mode?
.
Downloaded Stocked ROM 4.2.1 and other needed drivers to Flash my device, listed in some threads in this site.
But device is not detected in SPFlash tool. How to make it detected?
Please Help *** Unfortunately there is no Micromax service center in my state ***
Click to expand...
Click to collapse
bro! u r doing it wrong here's the procedure....
Switch Off your phone.
Press and hold Power button together with ‘volume +’ and ‘volume –’ buttons on the side of phone until you get two options.
Now, press the ‘volume +’ button to enter into the recovery mode.
This will make a Android icon appears on screen, press power button.
This will get you the menu options, use the volume up and down button to choose the option.
To select the option, you needs to simultaneously press two touch sensitive buttons on the bottom of your device, left button which is for the Menu and right button which is for going into previous stage. You have to do this for about 3 seconds.
Choose the wipe data/factory reset then press the enter button (left button which is for the Menu and right button which is for going into previous stage). Now, phone will get switch off and brings to its initial stage.
press thanks if i helped u!
Salman_nasu said:
bro! u r doing it wrong here's the procedure....
Switch Off your phone.
Press and hold Power button together with ‘volume +’ and ‘volume –’ buttons on the side of phone until you get two options.
Now, press the ‘volume +’ button to enter into the recovery mode.
This will make a Android icon appears on screen, press power button.
This will get you the menu options, use the volume up and down button to choose the option.
To select the option, you needs to simultaneously press two touch sensitive buttons on the bottom of your device, left button which is for the Menu and right button which is for going into previous stage. You have to do this for about 3 seconds.
Choose the wipe data/factory reset then press the enter button (left button which is for the Menu and right button which is for going into previous stage). Now, phone will get switch off and brings to its initial stage.
press thanks if i helped u!
Click to expand...
Click to collapse
Thanks mate.
What a relief.
Press thanks button to show ur appreciation dude that's best u can do!
Here is the situation. I updated tablet up to Android 5.0 using official software. It was working with no problems. Then system informed that you can update the system agai. And after second update, when system boots up, I get the error message that dongle is not responding. Press ok and get message that voice command is not responding. Press ok anf get message that system NS is not responding and so on. I cannot turn it off. After rebooting (long press on power button), I get the same.
SO I tried to make hard resset: long press for volume up, volume down and power buttons. I get to the screen with android and message No command. In all videos on youtube and in the net clearly stated that brief pressing the power button will open list where I can select factory reset. But when pressing power button nothing happens. Long press reboots the system, shot press no responce.
What to do? Any suggestions?
I put thread in wrong section. If moderator could move it to QandA section.