[Q] Is there anyway to flash a kernel from recovery? - AT&T Samsung Galaxy S II SGH-I777

Noob here,
Originally i was trying just to root my phone. I didn't want to flash any roms or anything like that just root it so i can get rid of the bloatware, and so after much reading i found that the only way to do it on ICS required a method that might have a bricking bug. Well i went for it anyway, did it successfully. All was well, saw the superuser icon, purchased mobile odin pro did the whole bit. It seemed to be working great. Then i had to immediately change kernels since the stock kernel seems to be the culprit with the whole bricking bug situation. Alrighty, well i went and did that sort of successfully? I chose Siyah since thats what most people in the thread chose. Flashed it with mobile odin pro then it got stuck on boot. After more research i figured out where i went wrong, apparently the first link to the siyah kernel was a CWM/jb kernel or some such situation. I apparently should have downloaded the one further down. My fault for being so quick to try to get it all over with. Now my issue now is i'm stuck at boot, Is it possible to somehow flash the zimage of the proper kernel from the recovery menu? Or would i need to flash a tar file or zip file? would that still work if i used a brand new sdcard or would it have had to have been installed previously? Any help or guidance would be very appreciated. Thank you!

cnidaria said:
Noob here,
Originally i was trying just to root my phone. I didn't want to flash any roms or anything like that just root it so i can get rid of the bloatware, and so after much reading i found that the only way to do it on ICS required a method that might have a bricking bug. Well i went for it anyway, did it successfully. All was well, saw the superuser icon, purchased mobile odin pro did the whole bit. It seemed to be working great. Then i had to immediately change kernels since the stock kernel seems to be the culprit with the whole bricking bug situation. Alrighty, well i went and did that sort of successfully? I chose Siyah since thats what most people in the thread chose. Flashed it with mobile odin pro then it got stuck on boot. After more research i figured out where i went wrong, apparently the first link to the siyah kernel was a CWM/jb kernel or some such situation. I apparently should have downloaded the one further down. My fault for being so quick to try to get it all over with. Now my issue now is i'm stuck at boot, Is it possible to somehow flash the zimage of the proper kernel from the recovery menu? Or would i need to flash a tar file or zip file? would that still work if i used a brand new sdcard or would it have had to have been installed previously? Any help or guidance would be very appreciated. Thank you!
Click to expand...
Click to collapse
I don't understand, what the hell did you flash, more information is needed.
Sent from my Xoom using Tapatalk 2

cnidaria said:
Noob here,
Originally i was trying just to root my phone. I didn't want to flash any roms or anything like that just root it so i can get rid of the bloatware, and so after much reading i found that the only way to do it on ICS required a method that might have a bricking bug. Well i went for it anyway, did it successfully. All was well, saw the superuser icon, purchased mobile odin pro did the whole bit. It seemed to be working great. Then i had to immediately change kernels since the stock kernel seems to be the culprit with the whole bricking bug situation. Alrighty, well i went and did that sort of successfully? I chose Siyah since thats what most people in the thread chose. Flashed it with mobile odin pro then it got stuck on boot. After more research i figured out where i went wrong, apparently the first link to the siyah kernel was a CWM/jb kernel or some such situation. I apparently should have downloaded the one further down. My fault for being so quick to try to get it all over with. Now my issue now is i'm stuck at boot, Is it possible to somehow flash the zimage of the proper kernel from the recovery menu? Or would i need to flash a tar file or zip file? would that still work if i used a brand new sdcard or would it have had to have been installed previously? Any help or guidance would be very appreciated. Thank you!
Click to expand...
Click to collapse
Good job doing all the reading you did. Sorry this happened If the jellybean kernel flashed and went to reboot you should have CWM recovery!!! If you download the 4.3.3 ICS no mic swap kernel Yes you can transfer the kernel to a microSD card from your PC with the adapter then insert it in the phone and then flash it in CWM install zip from Sdcard. You can transfer it from your PC to your phone using CWM, and flash the .zip I have never done this so I cant give you detailed info how to do it but I hope some one cool will help you with that if you need it. All you need to do is flash the ICS kernel in CWM and you will be good to go!! Worse case flash the stock rooted ICS package again in Odin and it will flash the stock ICS kernel with the firmware again then flash the right ICS Kernel in Mobile Odin .... GL
http://www.mediafire.com/?39q3t5yjsgj66cb Link to the right ICS kernel.

Nick281051 said:
I don't understand, what the hell did you flash, more information is needed.
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
He rooted, used mobile odin, flashed mali jb kernel got into bootloop. OP just hold volume up, down and power until CWM pops up and you can mount storage and flash another kernel from there.

122ninjas said:
He rooted, used mobile odin, flashed mali jb kernel got into bootloop. OP just hold volume up, down and power until CWM pops up and you can mount storage and flash another kernel from there.
Click to expand...
Click to collapse
This is exactly what happened. Thank you! will try this next

Thank you! worked great

Related

Bricked S2

New user yay
So here's the dealio guys, I've been researching about rooting and custom ROMs and such since I got my S2 (i777) a few months ago. I really don't like Touchwiz, and the stock ICS look is just better. So I found a nice-looking ROM (the AOKP ROM), rooted my phone with no problems using Siyah/Odin, and went ahead and put the ROM in an external SD card that I bought just for this purpose. So I boot into recovery mode (with ROM Manager), and then... nothing. I try to boot up my phone but it just flashes the start screen showing my model number, then just turns right back off. I've tried taking out my battery, still no dice. BUT, I can still get into download mode (but not recovery). So is there any way to restore the backup I made before installing the ROM using the download mode?
Thanks!
JakeAuditore said:
New user yay
So here's the dealio guys, I've been researching about rooting and custom ROMs and such since I got my S2 (i777) a few months ago. I really don't like Touchwiz, and the stock ICS look is just better. So I found a nice-looking ROM (the AOKP ROM), rooted my phone with no problems using Siyah/Odin, and went ahead and put the ROM in an external SD card that I bought just for this purpose. So I boot into recovery mode (with ROM Manager), and then... nothing. I try to boot up my phone but it just flashes the start screen showing my model number, then just turns right back off. I've tried taking out my battery, still no dice. BUT, I can still get into download mode (but not recovery). So is there any way to restore the backup I made before installing the ROM using the download mode?
Thanks!
Click to expand...
Click to collapse
Plug phone in odin and try again
JakeAuditore said:
New user yay
So here's the dealio guys, I've been researching about rooting and custom ROMs and such since I got my S2 (i777) a few months ago. I really don't like Touchwiz, and the stock ICS look is just better. So I found a nice-looking ROM (the AOKP ROM), rooted my phone with no problems using Siyah/Odin, and went ahead and put the ROM in an external SD card that I bought just for this purpose. So I boot into recovery mode (with ROM Manager), and then... nothing. I try to boot up my phone but it just flashes the start screen showing my model number, then just turns right back off. I've tried taking out my battery, still no dice. BUT, I can still get into download mode (but not recovery). So is there any way to restore the backup I made before installing the ROM using the download mode?
Thanks!
Click to expand...
Click to collapse
1. Never use ROM manager.
2. reflash i777 kernal with Odin.
3. get to recovery the correct way. ROM Manager is a joke.
killman2659 said:
Plug phone in odin and try again
Click to expand...
Click to collapse
Alright, reinstalled Siyah, and it said successful, but now it's not getting past the battery indicator screen when charging. Still no dice.
MotoMudder77 said:
1. Never use ROM manager.
2. reflash i777 kernal with Odin.
3. get to recovery the correct way. ROM Manager is a joke.
Click to expand...
Click to collapse
killman2659 said:
Plug phone in odin and try again
Click to expand...
Click to collapse
Is there any way I can just factory restore vanilla ICS with Odin? Like, unroot it?
JakeAuditore said:
Is there any way I can just factory restore vanilla ICS with Odin? Like, unroot it?
Click to expand...
Click to collapse
vanilla android is google, or AOSP.
This device has samsungs ****ty touchjizz.
Yes you can get a stock file from the download repository and flash a crappy build onto your phone.
MotoMudder77 said:
vanilla android is google, or AOSP.
This device has samsungs ****ty touchjizz.
Yes you can get a stock file from the download repository and flash a crappy build onto your phone.
Click to expand...
Click to collapse
Yeah, I hate Touchwiz. I found an unroot file, flashed it, and now I'm back to Gingerbread 2.3.4. I'm going to probably update to ICS again, then try once more to put that ROM on here. I won't use ROM Manager this time, hopefully it'll go alright.
JakeAuditore said:
Yeah, I hate Touchwiz. I found an unroot file, flashed it, and now I'm back to Gingerbread 2.3.4. I'm going to probably update to ICS again, then try once more to put that ROM on here. I won't use ROM Manager this time, hopefully it'll go alright.
Click to expand...
Click to collapse
iF you just want a custom ROM, just flash a custom kernel with odin, boot into recovery and flash said ROM. no need to go back to stock, update, flash another ROM, then root.....yada yada yada. waste of time and space on computer
MotoMudder77 said:
iF you just want a custom ROM, just flash a custom kernel with odin, boot into recovery and flash said ROM. no need to go back to stock, update, flash another ROM, then root.....yada yada yada. waste of time and space on computer
Click to expand...
Click to collapse
So I can do all this from Gingerbread? It was an ICS ROM that basically is just like the stock Google version. That's what I have been wanting since the beginning.
JakeAuditore said:
So I can do all this from Gingerbread? It was an ICS ROM that basically is just like the stock Google version. That's what I have been wanting since the beginning.
Click to expand...
Click to collapse
yea, in order to flash a custom ROM, you need custom recovery, ahh hell, been so long i forgot about having a rooted system required or not.
think you do, so should be able to get a rooted package, flash that, enter recovery and flash the ROM that you like.
Maybe someone will chime in and refresh my memory on the rooted system requirement.
U can flash a custom kernel .tar with Odin. There are some siyah tar files floating around. Or u could make a .tar yourself if u really wanted to. Once flashed it'll have cwm built in and u can flash whatever u want.
Sent from my SGH-I777 using Tapatalk 2
MotoMudder77 said:
yea, in order to flash a custom ROM, you need custom recovery, ahh hell, been so long i forgot about having a rooted system required or not.
think you do, so should be able to get a rooted package, flash that, enter recovery and flash the ROM that you like.
Maybe someone will chime in and refresh my memory on the rooted system requirement.
Click to expand...
Click to collapse
You only need root to install and use the Mobile Odin app, which is used for installing a custom kernel without tripping the flash counter. Once you've got Mobile Odin, download the custom kernel (e.g. Siyah) you want (ICS kernel if you're gonna install an ICS rom, same for GB), extract the zImage to your phone, and use Mobile Odin to install it. Note that if you're currently running GB and flash an ICS kernel, your phone won't boot but you can still get into CWM, which is all that matters because then you can flash the ICS rom of your choice and then your phone will boot.
Alternatively, you can do what Phalanx said and flash a custom kernel using PC version of Odin. Only difference between this and using Mobile Odin is you trip the flash counter, which can be fixed in any ICS rom by using the TriangleAway app.
The custom kernel will include CWM, which can then be used to flash any ROM/mod; in fact CWM is the ONLY safe method of flashing/wiping/restoring/backing up anything from that point forward.
karate104 said:
You only need root to install and use the Mobile Odin app, which is used for installing a custom kernel without tripping the flash counter. Once you've got Mobile Odin, download the custom kernel (e.g. Siyah) you want (ICS kernel if you're gonna install an ICS rom, same for GB), extract the zImage to your phone, and use Mobile Odin to install it. Note that if you're currently running GB and flash an ICS kernel, your phone won't boot but you can still get into CWM, which is all that matters because then you can flash the ICS rom of your choice and then your phone will boot.
Alternatively, you can do what Phalanx said and flash a custom kernel using PC version of Odin. Only difference between this and using Mobile Odin is you trip the flash counter, which can be fixed in any ICS rom by using the TriangleAway app.
The custom kernel will include CWM, which can then be used to flash any ROM/mod; in fact CWM is the ONLY safe method of flashing/wiping/restoring/backing up anything from that point forward.
Click to expand...
Click to collapse
This may not be the place to ask but how can I reset the flash counter that pops up in download mode
Sent from my SGH-I777
As long as you're running ICS, just download TriangleAway from the Play Store. That'll reset the flash counter to 0 and get rid of the yellow triangle that appears on start up.
Sent from my SGH-I777
karate104 said:
As long as you're running ICS, just download TriangleAway from the Play Store. That'll reset the flash counter to 0 and get rid of the yellow triangle that appears on start up.
Sent from my SGH-I777
Click to expand...
Click to collapse
Oh epic thought it only got rid of the triangle! Thanks!
Sent from my SGH-I777
122ninjas said:
Oh epic thought it only got rid of the triangle! Thanks!
Sent from my SGH-I777
Click to expand...
Click to collapse
It does. It does BOTH.
Sent from my SGH-I777 using Tapatalk 2
Bricked S2 too!
I finally bricked my first phone.Its been a long ride but it caught up to me. I have had three different android phones within about 4 years and have successfully rooted all three myself and have successfully flashed them over and over close to 1000 times between all three phones including modems, kernals, gapps, themes etc. So what gives? Why today? To be honest I don't know. But here is what happened...
The past few days I have been going back and forth between different kernals for this device to try to get something that won't freeze up. ( I liked browsing on this phone but I would get freeze ups and therefore would flash something new to try and resolve it.) Today my phone froze so I tried a simple reboot. The boot then did a freeze on the kernal's "intro" picture. It wasn't a bootloop it just frooze. (I was on XWLPT with Skyfire Kernal). I decided to reboot into recovery and flash a different kernel. I flashed NEAK The flash went halfway then stuck and froze. I rebooted to try to get back to the phone's main screen. This time it would not boot. I couldn't tell if it was in bootloop or was froze. I went back into recovery. Here I should of wiped everything but in the back of my mind I thought I could just do it in odin if I lost recovery. So I tried flashing Siyah for sammy roms. This is when I lost everything. It froze in cmw on the flash again but this time when I tried going back into recovery it stayed on the Galaxy SII screen. So I put the phone in download mode and started Odin up. When trying to flash anything in Odin I got stuck on nand write start! I never heard of this. I thought Odin would work as this is how I rooted the phone when I first got it. Last thing I did was install kies which couldn't even connect to the phone. So all I am left with is download mode and taking way more caution when flashing. I think it may have been a case of the brickbug. Even though I was on a I9100 rom and using "safe" kernels I believe something happened to lock me out from writing anything to the phone.
As long as you don't mind overwriting any data on the device you can use Kies for a complete restore. Download the latest version from Samsung, then click on the Tools selection, then "Firmware Upgrade and Initalization." You'll need your devices model number and serial number from underneath the battery. Follow the directions to put the device in download mode and proceed. You'll end up with a new factory-fresh reload.
zancro said:
As long as you don't mind overwriting any data on the device you can use Kies for a complete restore. Download the latest version from Samsung, then click on the Tools selection, then "Firmware Upgrade and Initalization." You'll need your devices model number and serial number from underneath the battery. Follow the directions to put the device in download mode and proceed. You'll end up with a new factory-fresh reload.
Click to expand...
Click to collapse
Now this i didn't know. My SII has been acting really weird ever since I unrooted. It won't let me update my firmware past 2.3.4 for some reason. So if I did this, it will most likely fix that problem?
Alright, I connected my phone to Kies, and went to Tools>Firmware Upgrade and Initialization, and it says my device does not support initialization. It also says this right under my device info:
Your device does not support software upgrading via Kies
--------------------------------------------------------------------------------------------
Current firmware version: PDA:KH7 / PHONE:LE5 / CSC:KH7 (ATT)
Ugh, really getting tired of this. Why is my phone being retarded? I don't think I want to bother rooting anymore, it seems like more of a hassle than a good thing. I really don't want to have to break my phone to get a replacement with my warranty. How do I fix this, guys?!

flashing new rom

I would like to flash a new rom. i am currently rooted. I would like to be able to use the nfc feature, as well have jellybean installed. i was looking at using this rom: http://forum.xda-developers.com/showthread.php?t=1574718. it mentions cwm. is this ok to install on my phone? also, any guidance with this would be great!
Yes its fine
Sent from my SGH-I777
Add long as your phone is an i777, you follow the instructions on the OP, and you re-wipe and flash before asking about something messing up... Yes.
I would also recommend flashing aokp 7.3 ICS, then flashing the JB ROM. It seems to be helpful.
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
OP don't forget to hit the thanks button to those who have helped you.
Sent from Team Pirate
sniper8752 said:
I would like to flash a new rom. i am currently rooted. I would like to be able to use the nfc feature, as well have jellybean installed. i was looking at using this rom: http://forum.xda-developers.com/showthread.php?t=1574718. it mentions cwm. is this ok to install on my phone? also, any guidance with this would be great!
Click to expand...
Click to collapse
Our phones have a recovery built into the kernel so make sure not to try and flash anything with Rom Manager.
Sent from Team Pirate's secret underground base
sniper8752 said:
I would like to flash a new rom. i am currently rooted. I would like to be able to use the nfc feature, as well have jellybean installed. i was looking at using this rom: http://forum.xda-developers.com/showthread.php?t=1574718. it mentions cwm. is this ok to install on my phone? also, any guidance with this would be great!
Click to expand...
Click to collapse
If you start off using any custom ROM, especially the AOKP, I do suggest you spend time read more, follow that thread (the link you provided), the more you read the more you save time and avoid headache down the road. One example that Phalanx just pointed out, it isn't listed anywhere but from reading and following that thread.
1. Make sure your device is i777, if anything other than that, stop.
2. Make sure you have the CwM Recovery installed. Do get along with the buttons such what home button does, what power button does. It depends on the CwMR version.
3. Follow the instruction of the ROM for installation.
4. Good luck and enjoy.
I have cwm installed, and I select the option in the app to reboot into recovery. it reboots, and goes into recovery mode. the only problem is, is that it is the android system recovery. I do not see an option for backup there.
sniper8752 said:
I have cwm installed, and I select the option in the app to reboot into recovery. it reboots, and goes into recovery mode. the only problem is, is that it is the android system recovery. I do not see an option for backup there.
Click to expand...
Click to collapse
For crispy sake don't use Rom manager!
Read more before flashing anything
Raise yer mizzenmast and swab 'er poop deck!
sniper8752 said:
I have cwm installed, and I select the option in the app to reboot into recovery. it reboots, and goes into recovery mode. the only problem is, is that it is the android system recovery. I do not see an option for backup there.
Click to expand...
Click to collapse
Luckily you don't have CWM installed yet using Rom Manager what you have is Rom Manager....
1. Uninstall Rom Manager ASOP
2. You need to flash a custom kernel to get CWM you can do that be installing Mobile Odin lite free from XDA and flashing a kernel...
3. You need to read LOTS more or you risk BRICKING your phone......
4. It will depend what ROM your on now what kernel you need to flash to get CWM Gingerbread = GB kernel ICS = ICS kernel PLEASE read before doing ANYTHING............
5. Go to this link and READ 3a. http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
snipe2nite said:
Luckily you don't have CWM installed yet using Rom Manager what you have is Rom Manager....
1. Uninstall Rom Manager ASOP
2. You need to flash a custom kernel to get CWM you can do that be installing Mobile Odin lite free from XDA and flashing a kernel...
3. You need to read LOTS more or you risk BRICKING your phone......
4. It will depend what ROM your on now what kernel you need to flash to get CWM Gingerbread = GB kernel ICS = ICS kernel PLEASE read before doing ANYTHING............
5. Go to this link and READ 3a. http://forum.xda-developers.com/showthread.php?p=18576627#post18576627
Click to expand...
Click to collapse
i noticed there is only mobile odin pro now? any free solutions? and so with this, i can flash my rom?
sniper8752 said:
i noticed there is only mobile odin pro now? any free solutions? and so with this, i can flash my rom?
Click to expand...
Click to collapse
No. The lite version is still in the OP of the developers thread as an attachment.
sniper8752 said:
i noticed there is only mobile odin pro now? any free solutions? and so with this, i can flash my rom?
Click to expand...
Click to collapse
I will help you get this working, I have some questions tho to get you the right info when you see this respond back just don't do anything till
I help you.... I would rather help you then have you brick your phone but of course do whatever you want.... You can DL and install these 2 files just like any other apk install MobileODINLite first then FlashKernel I777 of course you will need to be rooted, this wont change anything on your phone it will just install the app to get you ready to flash the zImage... The next step is KEY as to what you're running now.... That's where I have questions...
https://www.dropbox.com/s/xxf4c4tvevh1gnx/MobileODINLite-v3.25.apk Here is a link to the latest release from my dropbox.
https://www.dropbox.com/s/5q4b5tkmxsdx0e1/Mobile ODIN FlashKernel I777.apk FlashKernel I777
EDIT I will be around here for about 3 hours it's 6:40am now on the west coast after that it will be like 10 hours...
got it. why does odin need my location?
also, it says that odin required an add-on to be able to flash firmwares on the device (i think i just figured it out... was that the second thing i installed?).
thanks for your help! i appreciate it.
sniper8752 said:
got it. why does odin need my location?
also, it says that odin required an add-on to be able to flash firmwares on the device (i think i just figured it out... was that the second thing i installed?).
thanks for your help! i appreciate it.
Click to expand...
Click to collapse
I'm not sure why the location permission BUT it is built by 1 of the best devs on here ChainFire nothing to worrie about....
the second file was the add-on, when you load mobile odin is it saying you need to install the add-on? Now you need to flash the zImage to get CWM if you haven't already....What firmware are you on now? I feel dumb telling to flash the 2nd file you only need the Odin lite to flash the zImage (kernel) to get CWM once you flash a new ROM in CWM you will lose all the data anyways... Now that you have um back them up and save them so when you flash a new ROM you can reinstall both of them!! Always good to have IMO...
snipe2nite said:
I'm not sure why the location permission BUT it is built by 1 of the best devs on here ChainFire nothing to worrie about....
the second file was the add-on, when you load mobile odin is it saying you need to install the add-on? Now you need to flash the zImage to get CWM if you haven't already....What firmware are you on now? I feel dumb telling to flash the 2nd file you only need the Odin lite to flash the zImage (kernel) to get CWM once you flash a new ROM in CWM you will lose all the data anyways... Now that you have um back them up and save them so when you flash a new ROM you can reinstall both of them!! Always good to have IMO...
Click to expand...
Click to collapse
I have installed both apks. zimage has to do with the bootup, right? where do i get that file? would the firmware be i777ucle5?
@sniper8752,
You seem to be flailing around in the dark. You really need to not only read, but also see how things fit together. Just a friendly warning, if you don't know what a zImage is, or why you are flashing it, or which zImage to use, you still need to do some more reading and get a better overall picture before you continue with flashing JellyBean.
The zImage is the kernel. (Don't forget to capitalize the I as linux is case sensitive.) I am assuming you are rooted but do not have ClockworkMod Recovery installed yet. You need to install a custom kernel that matches your system. That means flash a Gingerbread kernel if you currently have a Gingerbread system, or an ICS kernel if you currently have an ICS system. The various options for the kernels are available in the development section. To use a zImage with mobile odin, you must extract the zImage from the .zip file (or sometimes .tar) that the developer makes available. Mobile odin can actually pull the kernel from a tar file, but it will not recognize a zip file.
creepyncrawly said:
@sniper8752,
You seem to be flailing around in the dark. You really need to not only read, but also see how things fit together. Just a friendly warning, if you don't know what a zImage is, or why you are flashing it, or which zImage to use, you still need to do some more reading and get a better overall picture before you continue with flashing JellyBean.
The zImage is the kernel. (Don't forget to capitalize the I as linux is case sensitive.) I am assuming you are rooted but do not have ClockworkMod Recovery installed yet. You need to install a custom kernel that matches your system. That means flash a Gingerbread kernel if you currently have a Gingerbread system, or an ICS kernel if you currently have an ICS system. The various options for the kernels are available in the development section. To use a zImage with mobile odin, you must extract the zImage from the .zip file (or sometimes .tar) that the developer makes available. Mobile odin can actually pull the kernel from a tar file, but it will not recognize a zip file.
Click to expand...
Click to collapse
I have decided on flashing this rom: http://ultimatum.us/. looks like it will take about an hour to download... i currently have ics installed. to flash the zImage, do I click on "Kernel" in the app.?
thanks for help and explaining the zImage. what would be the best way to learn all of this? is there a good site so I don't have to go looking around everywhere? maybe like a beginner's guide?
sniper8752 said:
I have decided on flashing this rom: http://ultimatum.us/. looks like it will take about an hour to download... i currently have ics installed. to flash the zImage, do I click on "Kernel" in the app.?
thanks for help and explaining the zImage. what would be the best way to learn all of this? is there a good site so I don't have to go looking around everywhere? maybe like a beginner's guide?
Click to expand...
Click to collapse
Dude, you are so far off path. there are no "begginers" guides, just what we got. Honestly, this stuff aint for you man. dont mess with your phone.
but if you insist, then just keep reading.
sniper8752 said:
I have decided on flashing this rom: http://ultimatum.us/. looks like it will take about an hour to download... i currently have ics installed. to flash the zImage, do I click on "Kernel" in the app.?
thanks for help and explaining the zImage. what would be the best way to learn all of this? is there a good site so I don't have to go looking around everywhere? maybe like a beginner's guide?
Click to expand...
Click to collapse
What app? There is no app...
ClockWorkMod Recovery (CWM) yes, app NO.
EDIT: Just realized you may be talking about mobile Odin our three cwm app. Don't use either at this print, much easier using CWM (reboot into recovery of you've got a custom ROM/kernel)
Clay
Team Pirate
Sent from my Buttery Smooth PINK SGH-i777
so i should use cwm instead of odin? i thought people were telling me not to use cwm?

[Q] I think I've stuffed up "Badly"!!

Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.

Stuck in CWM Recovery

Hey guys.
I've searched the forums for this issue, unfortunately it seems like mine is a little unique and I can't find a solution to my problem anywhere.
I'm stuck in CWM Recovery mode, and although I can navigate the menu... when pressing the Home key to select the various options, nothing happens besides the options blinking for a sec. I can access Odin Mode with Power/Volume +/- but that's it. Also it's worth noting that I'm unable to access my phone's files from my computer when in download mode (my guess is because the phone isn't set to USB storage mode which I have to do from the booted home screen, which... I can't access).
This happened after the first time entering Recovery mode on CWM, and although I have ROM Manager installed on my phone, after researching a little I found that was NOT what I wanted to use. And I did NOT use that program.. my CWM was flashed in from a .tar on Odin (the windows program). I also have a Jellybam folder placed in the phone, which was my next step.
How can I get out of CWM Recovery so that I can continue flashing the Jellybam ROM?
I apologize if I've missed anything. Please let me know if you need any other information. I'll be sure to hit the thank you button on every reply.
THANK YOU!
:crying:
um....
you are supposed to flash the ROM from CWM, so why would you want to get out of CWM to get back into CWM?
you havent mentioned what version of Android you were already running or what kernel you flashed, but have you tried using the POWER button to select things in CWM? Are you sure you used the right kernel? Are you sure you have an i777?
Hey Pirateghost, thanks for the reply! And yes, I was going into CWM Recovery to flash the ROM. The reason I wanted out of CWM was because it had no functionality... yes, I did try using the power button to select things. Seems the home button was it? In any case nothing worked. My version of Android was Gingerbread UCKH7, and I'm %100 sure it's an i777. By using the "right kernel" you mean the right version of Jellybam?
UPDATE: I got out of the bootloop by using a stock root UCKH7 kernel, bringing it in from Odin. Now I'm just trying to understand what went wrong and how I can continue to flash my Jellybam ROM in without any issues. I also found that my CWM app disappeared after I uninstalled ROM Manager after getting access back to my phone.
More info...
the kernel I installed for CWM was KH4 at this thread: http://forum.xda-developers.com/showthread.php?t=1103399
After putting the KH7 stock root kernel in via Odin and getting out of the bootloop, I deleted ROM Manager off my phone and reflashed the KH4 kernel so I could get CWM. That worked fine, but now Superuser is crashing.
??
xargis said:
More info...
the kernel I installed for CWM was KH4 at this thread: http://forum.xda-developers.com/showthread.php?t=1103399
After putting the KH7 stock root kernel in via Odin and getting out of the bootloop, I deleted ROM Manager off my phone and reflashed the KH4 kernel so I could get CWM. That worked fine, but now Superuser is crashing.
??
Click to expand...
Click to collapse
The kernel you just linked above is for the GT-I9100, not the SGH-I777. You seem to be moving forward without providing yourself with enough knowledge. If you are sure the phone is an I777 then stay away from the I9100 forums. Get what you need from here. There is lots of information in the guides linked in my signature. There is enough information there to guide you through everything you want to do.
xargis said:
More info...
the kernel I installed for CWM was KH4 at this thread: http://forum.xda-developers.com/showthread.php?t=1103399
After putting the KH7 stock root kernel in via Odin and getting out of the bootloop, I deleted ROM Manager off my phone and reflashed the KH4 kernel so I could get CWM. That worked fine, but now Superuser is crashing.
??
Click to expand...
Click to collapse
You are flashing an older kernel on a newer ROM??? why? if you want to have CMW recovery you should flash your stock rom and then get the CWM .tar file and flash it in Odin. If you happen to get a .zip CWM file you can rename it to update.zip and flash it using your stock ROM's recovery options.
Search something along these lines: CWM5.8.1.8-i777.zip or recovery-clockwork-5.0.2.3-galaxys2att.tar as examples
creepyncrawly said:
The kernel you just linked above is for the GT-I9100, not the SGH-I777. You seem to be moving forward without providing yourself with enough knowledge. If you are sure the phone is an I777 then stay away from the I9100 forums. Get what you need from here. There is lots of information in the guides linked in my signature. There is enough information there to guide you through everything you want to do.
Click to expand...
Click to collapse
WOW! I don't know how I missed that. Must pay more attention to detail...
Thank you so much for pointing that out Creepyncrawly!
Commodore 64 said:
... If you happen to get a .zip CWM file you can rename it to update.zip and flash it using your stock ROM's recovery options. ...
Click to expand...
Click to collapse
It's great having new folks around helping out.
This is bad information, however. 3e recovery will enforce signature verification on any update.zip, and it will fail.
creepyncrawly said:
It's great having new folks around helping out.
This is bad information, however. 3e recovery will enforce signature verification on any update.zip, and it will fail.
Click to expand...
Click to collapse
always a pleasure to lend a hand. you're right it used to work on 2e I think, I was trying to signify the difference between the zip and tar, but thank you so much for the correction.
So should I be using a different kernel? I'm sorry I'm not quite sure what you're saying Commodore64, my head has been spinning from all this.
xargis said:
So should I be using a different kernel? I'm sorry I'm not quite sure what you're saying Commodore64, my head has been spinning from all this.
Click to expand...
Click to collapse
you should be using a kernel intended for your phone....your phone (if branded AT&T) is either an i727 skyrocket or i777. this is the i777 forum section. you appear to have flashed a kernel for an i9100...
just follow creepy's guides and do it the right way. there is nothing you can flash in STOCK recovery that will give you CWM or a new kernel (which on this phone CWM is packed with the kernel)
xargis said:
So should I be using a different kernel? I'm sorry I'm not quite sure what you're saying Commodore64, my head has been spinning from all this.
Click to expand...
Click to collapse
There is not just one answer, you can go back to one of the stock ROMs, like the ones provided by creepyncrawly threads.
There are a lot of threads on this and I don't have my I777 anymore but I used to do this:
1- Once you flashed a stock rom, go into recovery and cleanup. data/cache reset.
2- Have the files you want to flash on your phone. (if you format the SD card you will erase your files including the ones you want to flash!)
3- Use your .tar Odin CWM that worked for you before now to flash CWM.
4- Once in the CWM flash a newer CWM version (CWM6.0.1.0-i777.zip) since your ROM is based on CM/AOKP
5- After flash Go to Advanced and reboot recovery (this will reboot your phone now with the newer version of CWM)
6- Once in the newer CWM clean up again.
7- Don't reboot, have the correct version (latest or whatever) of your Custom ROM and install it now.
This is the general idea, if you don't know what you're doing read the threads in the development section, everything you need is there.
Educate yourself before you make your phone a crippled rabbit and scream for help.
Commodore 64 said:
There is not just one answer, you can go back to one of the stock ROMs, like the ones provided by creepyncrawly threads.
There are a lot of threads on this and I don't have my I777 anymore but I used to do this:
1- Once you flashed a stock rom, go into recovery and cleanup. data/cache reset.
2- Have the files you want to flash on your phone. (if you format the SD card you will erase your files including the ones you want to flash!)
3- Use your .tar Odin CWM that worked for you before now to flash CWM.
4- Once in the CWM flash a newer CWM version (CWM6.0.1.0-i777.zip) since your ROM is based on CM/AOKP
5- After flash Go to Advanced and reboot recovery (this will reboot your phone now with the newer version of CWM)
6- Once in the newer CWM clean up again.
7- Don't reboot, have the correct version (latest or whatever) of your Custom ROM and install it now.
This is the general idea, if you don't know what you're doing read the threads in the development section, everything you need is there.
Educate yourself before you make your phone a crippled rabbit and scream for help.
Click to expand...
Click to collapse
this makes no sense, dude.
1. if he is on a stock rom, there is nothing CM/AOKP on his phone
2. on this device the recovery is packed with the kernel, flashing some other CWM doesnt really matter at all. none of this is necessary.
you can flash any kernel you want (made for this device) if you dont plan on booting the OS and only plan on flashing a rom...
you have now complicated an already easy method.
Hey everyone - just wanted to let you guys know that I am now running JellyBAM and so far everything seems fine.
Thank you all for your help, seriously. If anyone has any questions about what I did etc., just ask and I'll get back to ya.
Thanks! :good:
Glad to hear you got JellyBAM up and running xargis, and just to reiterate what pirateghost was saying, you won't get CWM by flashing a CWM.tar file lol, I don't even think one can be found for this model (SGH-i777) which is the device that I currently have, the ONLY way to get CWM onto this device is to flash the proper kernel for this device, but keep in mind that there is another factor to think about as well, depending on what type of custom rom you want to run there are different kernels out there that work best and offer different/better features for deployment into the custom rom for which you will be running, in other words some roms are kernel specific, you can only use certain kernels with CM10/AOKP/ParanoidAndroid based roms, and such is the same with only using certain kernels with Sammy based stock roms, so the choice is yours, hope this info was informative to you and that you definately find a good productive rom that you will be happy to play with and run, have fun with your i777 s2, that's one of the things this forum is all about!!

[Q] need help unbricking my GP 5.0 US (i think it's bricked) pls help

LATEST EDIT http://forum.xda-developers.com/showpost.php?p=55161735&postcount=17
EDIT 2: http://forum.xda-developers.com/showthread.php?p=55095194#post55095194
EDIT: I got it rooted now but i would like some help flashing a custom ROM onto it. like what i need to know about it and stuff and which ROMs work for galaxy player 5.0. I was looking at cyanogenmod 11 but and the beanstalk one, but the rear camera doesn't work right i heard. I would kindof like a kitkat rom but if i have to use jellybean then i guess i do. i would like to know which rom is recommended
hey you all i need a little help rooting my galaxy player 5.0. model YP-G70 firmware 2.3.5 kernel version [email protected] #2 build number GINGERBREAD.UEK18
i was gonna use the superoneclick program but it says "file download blocked." isn't shortfuse.org the site to get it from? or where do i get the program?
I had already installed Samsung Kies, but now i need the superoneclick program. I was trying to get version 2.3.3. so what i'm wondering is where and how do you get superoneclick???
I've done a lot of researching which way is the best to root it, and i think superoneclick looks best. please tell me different if i'm wrong ... so yeah... thanks in advance
Your right to try and use superoneclick as a rooting program. Try downloading the most updated version and scan on Norton for viruses. Then open the program, make sure you have USB debugging on and hit root. After that hit yes when you get prompted to test and unplug your device and reboot.
http://m.download.cnet.com/SuperOneClick/3000-2094_4-75447027.html
Here's a link to CNET to download. If diwnlias did not work try looking for it on xda
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Your right to try and use superoneclick as a rooting program. Try downloading the most updated version and scan on Norton for viruses. Then open the program, make sure you have USB debugging on and hit root. After that hit yes when you get prompted to test and unplug your device and reboot.
Here's a link to CNET to download. If diwnlias did not work try looking for it on xda
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
thanks for answering!! i clicked on the link and hit download and it downloaded but it said that chrome blocked, cause it's malicious. (pic below) it shows up under my downloads though. i scanned it with vipre (i use that instead of norton) and it said it was trojan. should i just try to run it anyway or what...
edit: i tried opening it from my downloads and here's what it brings up. pic below
Antivirus saying the package is malicious is perfectly normal. The 2 root exploits used in SuperOneClick are already identified as Android-based trojans in all modern antivirus softwares. If you downloaded from a trusted site, DISABLE your antivirus software and start the rooting process. When you're done, don't forget to turn it back on.
Sent from Google Nexus 4 @ CM11
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think
Austin68 said:
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think [/QUOTE
Now that you are rooted it is time for some awesome custom ROMs. There is cm11 you could try by going into the development page and downloading it. But before you flash make sure you have a nandroid back up and you go in this order if you want to run cm11.
Gingerbread, ice cream sandwich, jelly bean, jelly bean 4.3, then cm11. Make sure your recovery is updated when flashing different rims or it might come out as a herring.
Also you could just go straight to KitKat. If you want.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
troy5890 said:
Austin68 said:
wow you're right!! I got it rooted!! so i think... i have the app superuser soo yeah... now i wanna flash a custom rom which i have to research or if you all would be kind enough to help me with. i didn't do any research on that yet so i really know nothing. just that i'm missing out on some good stuff i think [/QUOTE
Now that you are rooted it is time for some awesome custom ROMs. There is cm11 you could try by going into the development page and downloading it. But before you flash make sure you have a nandroid back up and you go in this order if you want to run cm11.
Gingerbread, ice cream sandwich, jelly bean, jelly bean 4.3, then cm11. Make sure your recovery is updated when flashing different rims or it might come out as a herring.
Also you could just go straight to KitKat. If you want.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
I think he doesn't even have a custom recovery yet and need some guide on that. Unfortunately I couldn't help because I have a Player 4.0 instead of 5.0.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
no i don't have a custom recovery or a nandroid backup. not sure how to make them either, but i'll do some checkin' around. also idk which rom to choose. I'm kinda hoping to get 4.4 kitkat if i can, but i'm only on 2.3.5 now soo... i hope i can. i was thinkin' about cygenmod but i've heard that the camera doesn't always work then. and i'm not exactly sure how to get it. If you wanna help me out I'd really appreciate it
The camera works
Sent from my YP-G70 using XDA Free mobile app
I was reading some tutorials for installing CWM recovery. a lot of them say that you would have to flash a kernel with it built into it. and another one says to use rom manager app which I have but the app doesn't support a galaxy player 5.0. so i wanna install it but I don't know how. like there are so many tutorials. flashing a kernel is risky I heard. not sure how i should start
Austin68 said:
I was reading some tutorials for installing CWM recovery. a lot of them say that you would have to flash a kernel with it built into it. and another one says to use rom manager app which I have but the app doesn't support a galaxy player 5.0. so i wanna install it but I don't know how. like there are so many tutorials. flashing a kernel is risky I heard. not sure how i should start
Click to expand...
Click to collapse
Go for the kernel route. Find a CWM'd kernel that supports your current version of stock ROM and flash that. ROM Manager performs badly even on supported devices so don't even think about it.
And... The risk of flashing a kernel/ROM is something you eventually have to get over if you want your device better
Sent from Google Nexus 4 @ CM11
AndyYan said:
Go for the kernel route. Find a CWM'd kernel that supports your current version of stock ROM and flash that. ROM Manager performs badly even on supported devices so don't even think about it.
And... The risk of flashing a kernel/ROM is something you eventually have to get over if you want your device better
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
ok thanks!! I'll start lookin' for the right kernel if you have any recommendations just let me know =D
ok I downloaded a kernel (didn't flash it yet). I downloaded this kernel > http://forum.xda-developers.com/showthread.php?t=2318550 and i'm gonna download odin to flash it with but i don't think it's a .tar file so will odin work???? also i guess i'll just download the latest version of odin...?? it said that some versions aren't compatible with some devices.
EDIT it's a .zip file. i think you need cwm to flash it. please tell me if i'm wrong. but i don't have cwm. so i think i might have to choose another kernel ??
also will flashing that kernel erase my third-party apps or app data??
and when i get this kernel on, will I be able to run cm11 on here or will i have to get a different kernel to run on that??
also i think this vid might be a good one. but he never says that he does a nandroid backup or anything
https://www.youtube.com/watch?v=mlyTZZVOvag
Austin68 said:
ok I downloaded a kernel (didn't flash it yet). I downloaded this kernel > http://forum.xda-developers.com/showthread.php?t=2318550 and i'm gonna download odin to flash it with but i don't think it's a .tar file so will odin work???? also i guess i'll just download the latest version of odin...?? it said that some versions aren't compatible with some devices.
EDIT it's a .zip file. i think you need cwm to flash it. please tell me if i'm wrong. but i don't have cwm. so i think i might have to choose another kernel ??
also will flashing that kernel erase my third-party apps or app data??
and when i get this kernel on, will I be able to run cm11 on here or will i have to get a different kernel to run on that??
also i think this vid might be a good one. but he never says that he does a nandroid backup or anything
https://www.youtube.com/watch?v=mlyTZZVOvag
Click to expand...
Click to collapse
Yeah this kernel is CWM only, so no go. As far as Odin compatibility goes, no, the latest version won't always work with anything. Use Odin 1.8x if you can (mine is 1.85 for my Player 4.0 and Captivate, should be the same for Galaxy S-family devices).
Kernels don't wipe any of your data, though flashing a wrong kernel which causes bootloop may do.
After flashing the corresponding kernel, get into CWM recovery and start flashing CM or the ROM you want as per the instructions given in the ROM's post. All AOSP-based ROMs run different (and incompatible) kernels than stock so don't worry about kernels once you're in.
Sent from Google Nexus 4 @ CM11
AndyYan said:
Yeah this kernel is CWM only, so no go. As far as Odin compatibility goes, no, the latest version won't always work with anything. Use Odin 1.8x if you can (mine is 1.85 for my Player 4.0 and Captivate, should be the same for Galaxy S-family devices).
Kernels don't wipe any of your data, though flashing a wrong kernel which causes bootloop may do.
After flashing the corresponding kernel, get into CWM recovery and start flashing CM or the ROM you want as per the instructions given in the ROM's post. All AOSP-based ROMs run different (and incompatible) kernels than stock so don't worry about kernels once you're in.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
so what kernel should i get? it has to be a Gingerbread one right? since i'm still on stock gingerbread rom. should I use Entropy's Daily Driver? that would be the only other one, right?
and once i get a jellybean or a kk rom wouldn't it be a good idea to get a better kernel?? like one made for a kk or jb? would it be faster? but then i would have to switch kernels if i would for any reason want to go back to stock gb rom??
Austin68 said:
so what kernel should i get? it has to be a Gingerbread one right? since i'm still on stock gingerbread rom. should I use Entropy's Daily Driver? that would be the only other one, right?
and once i get a jellybean or a kk rom wouldn't it be a good idea to get a better kernel?? like one made for a kk or jb? would it be faster? but then i would have to switch kernels if i would for any reason want to go back to stock gb rom??
Click to expand...
Click to collapse
I have a Player 4.0 instead of a 5.0 so unfortunately can't help you with finding the right kernel. Yes it's best for stock Gingerbread, but if you find Froyo ones, they can also be used. Do note that you can't boot into Gingerbread with a Froyo kernel, so use its CWM to flash whatever you want immediately afterwards.
I don't know of any JB/KK custom kernels, and since Player's single core CPU has its limitations, a custom kernel won't make it much better. At least on my IncS, even overclocking to 1.6GHz won't help with KK eating up my resources.
GB, JB, KK - kernels for different versions of Android are usually not cross-compatible, so you *must* switch kernel if you want to fall back to GB.
Sent from Google Nexus 4 @ CM11
AndyYan said:
I have a Player 4.0 instead of a 5.0 so unfortunately can't help you with finding the right kernel. Yes it's best for stock Gingerbread, but if you find Froyo ones, they can also be used. Do note that you can't boot into Gingerbread with a Froyo kernel, so use its CWM to flash whatever you want immediately afterwards.
I don't know of any JB/KK custom kernels, and since Player's single core CPU has its limitations, a custom kernel won't make it much better. At least on my IncS, even overclocking to 1.6GHz won't help with KK eating up my resources.
GB, JB, KK - kernels for different versions of Android are usually not cross-compatible, so you *must* switch kernel if you want to fall back to GB.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
thank you very much for your help. i was able to flash a custom kernel and get cwm. thanks you helped a lot
now i got the rom i was gonna flash downloaded it and extracted it. and i shouldn't have extracted it. then i was trying to flash it and i discovered i messed up. so i pulled the sd card out (which i had a complete nandroid backup on.) [the real mistake] and decided to start over. like, put the zipped files on the sd card. so i put the zips (unextracted) onto my micro sd but it can't mount the sd. so i think i'm like screwed. please help me
oh and when i boot all i see is the samsung logo, then it goes straight to cwm recorvery. I can also get into download mode. so I can get into cwm but my recovery is on my micro sd and it can't mount it. (i did a nandroid backup but it doesn't benefit me now. i also have to backup on my pc, but my pc doesn't wanna recognize it) did i brick it??
what i did...went into cwm wipe data/factory reset and wiped it. next > mounts and storage and clicked format system, and formatted it. then last i wiped dalvik cache. then i went to flash the rom (CM9) and it didn't flash. (because i had extracted it on the pc. it no longer was a .zip) don't know what i was thinkin' but yeah...
as of now i'm gonna start looking for threads to fix it.
i don't think samsung kies is working right either. :/ http://i.imgur.com/WV0iBPk.jpg
please help me unbrick it or whatever i need to do. only made one small mistake and now all this... :'( if you know anything about how to fix it pls reply. i need all the help i can get. thanks ...
Austin68 said:
thank you very much for your help. i was able to flash a custom kernel and get cwm. thanks you helped a lot
now i got the rom i was gonna flash downloaded it and extracted it. and i shouldn't have extracted it. then i was trying to flash it and i discovered i messed up. so i pulled the sd card out (which i had a complete nandroid backup on.) [the real mistake] and decided to start over. like, put the zipped files on the sd card. so i put the zips (unextracted) onto my micro sd but it can't mount the sd. so i think i'm like screwed. please help me
oh and when i boot all i see is the samsung logo, then it goes straight to cwm recorvery. I can also get into download mode. so I can get into cwm but my recovery is on my micro sd and it can't mount it. (i did a nandroid backup but it doesn't benefit me now. i also have to backup on my pc, but my pc doesn't wanna recognize it) did i brick it??
what i did...went into cwm wipe data/factory reset and wiped it. next > mounts and storage and clicked format system, and formatted it. then last i wiped dalvik cache. then i went to flash the rom (CM9) and it didn't flash. (because i had extracted it on the pc. it no longer was a .zip) don't know what i was thinkin' but yeah...
as of now i'm gonna start looking for threads to fix it.
i don't think samsung kies is working right either. :/ http://i.imgur.com/WV0iBPk.jpg
please help me unbrick it or whatever i need to do. only made one small mistake and now all this... :'( if you know anything about how to fix it pls reply. i need all the help i can get. thanks ...
Click to expand...
Click to collapse
Easy, bro. Does your current CWM recovery have a "sideload" option? Look for that either in the main menu or in the "install zip from sdcard" section. If you have that, then you could try sideloading a ROM directly from your PC to your device and it will flash automatically. For more instructions, just Google "ADB sideload".
If that doesn't cut it... Grab Odin and a stock GB firmware (these should be floating around in Dev section), flash that by Odin, and your Player gets returned to GB stock condition, where you can start over.
Sent from Google Nexus 4 @ CM11
AndyYan said:
Easy, bro. Does your current CWM recovery have a "sideload" option? Look for that either in the main menu or in the "install zip from sdcard" section. If you have that, then you could try sideloading a ROM directly from your PC to your device and it will flash automatically. For more instructions, just Google "ADB sideload".
If that doesn't cut it... Grab Odin and a stock GB firmware (these should be floating around in Dev section), flash that by Odin, and your Player gets returned to GB stock condition, where you can start over.
Sent from Google Nexus 4 @ CM11
Click to expand...
Click to collapse
no it doesn't have a sideload option anywhere. i have odin. and for the firmware, doesn't it have to be in the .tar form for odin to flash it?? i'll check that out. btw thanks !!
but the computer doesn't wanna recognize my device. so how can i flash anything??
EDIT do you think i could flash my nandroid backup through odin?? it has .tar files and one .md5 file, but 2 that aren't. i'll post a screen shot. but if i flash each of the .tar files and the .md5 file via odin do you think it would work? that file is only a .md5 though and not a .tar.md5 so idk
Austin68 said:
no it doesn't have a sideload option anywhere. i have odin. and for the firmware, doesn't it have to be in the .tar form for odin to flash it?? i'll check that out. btw thanks !!
but the computer doesn't wanna recognize my device. so how can i flash anything??
EDIT do you think i could flash my nandroid backup through odin?? it has .tar files and one .md5 file, but 2 that aren't. i'll post a screen shot. but if i flash each of the .tar files and the .md5 file via odin do you think it would work? that file is only a .md5 though and not a .tar.md5 so idk
Click to expand...
Click to collapse
No, nandroid backups won't be recognized by Odin. Just try finding a stock firmware out there. If you want your data back from your nandroid backup, you can always restore everything to normal first, then restore that nandroid and do whatever you please.
Sent from Google Nexus 4 @ CM11

Categories

Resources