I just bought a SHV- E160k Note (2nd hand) and had been converted into SGH-I717 model.. but the baseband version is still SHV-160k.FA04.1942.KT .. can i flash I717 Rom on this one? since its still on 2.3.6 version and i got some problems with my data connection.. it cant connect to mobile data even though the mobile data has been already ticked.
its really weird, the back of the phone says SHV-E160k but the Model Number in About phone says SAMSUNG-SGH-I717, Android Version 2.3.6 and the baseband is SHV-160k.FA04.1942.KT.. build number is KoXDA_Teamleader V1.0 ... its already been rooted when i bought it, but i don't know what CWM and ROM to flash :/
Sounds to me that you need to check your APN settings and make sure they are correct for your carrier
Related
Can u tell me how to re flash my Galaxy Tab 10.1 3G?
First of all, which is my firmware (as it says in "About phone")
Baseband version (P7500XXKG7) or
Build number (P7500XWKG9)?
What do I need and what's the procedure?
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
ProNewb said:
I have flashed this firm:-
XWKL1
Firmware info
PDA:XWKL1
PHONE: DDKL1
Date: 13/12/2011
Android 2.3.6
INU (India): http://www.multiupload.com/7K8FL86IEQ
XWKL1 Stock Kernel: http://www.multiupload.com/LSO4P572C9
Password: [email protected]
with speedmod kernel.
(I should have flashed JPKJ2 gb 2.3.5 firmware, but because its outdated, flashed the kl1 2.3.6 instead)
My problem is that i cannot access the 2g or 3g internet. I have the jKay mod which turns the signal icons to green. but they dont. they just come on (grey) but dont connect.
I called the operator many times to install the settings. but still no help.
If anyone in uae, can u confirm theres a gb 2.3.6 for uae?
any advice?
I recently bought a samsung Galaxy Y, and this had 2.3.6 xxkk(?) firmware with arabic support. Can any UAE user confirm that there is a 2.3.6 official update for galaxy s2?
Click to expand...
Click to collapse
Check your APNs to see if they changed or got wiped out?
ctomgee said:
Check your APNs to see if they changed or got wiped out?
Click to expand...
Click to collapse
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Hi all,
First time poster, long time follower!!
I'm hoping someone can help me here because i have a real headache with my galaxy s2. I live in Rep. of Ireland.
When i got it at Christmas everything was perfect. But two weeks later i suddenly lost my 3g. Phone works fine on 2g (except for the slow speed), but i contacted my carrier 3Ireland and they said everything is fine on their end. My APN is perfect, i've tried toggling airplane mode, entering codes, data package checks. You name it and i've tried it.
When i force my phone to select 3g it looses all signal and i have to restart my phone and quickly go back into settings to choose 2g or i will loose signal again.
This is the following on my phone.
Android version 2.3.5
Baseband version I9100XXKI4
Kernel Version [email protected] #2
Build number GINGERBREAD.XWKI8
I've being reading about modem/radios lately, is that just the baseband? Could that be my problem. I'm a noob at this kinda thing.I just want my 3g to come back.
All help is greatly appreciated. Look forward to hearing from you all.
Thanks.
ProNewb said:
Yep, they are still there.
I installed new one by calling the helpline. they told me to restart my phone afterwards. i did, but still cannot connect.
Is it possible that marketenabler app is causing the problem? i know that when you switch sim ids (from local to US etc) u cannot connect 3g.
but even if i try to connect with local sim id it does not connect
Click to expand...
Click to collapse
sxi200 said:
Man, just Google for your provider apn details for android. As far as I know 3g etc should work the same on all firmwares unless your phone is not the international version.
I have the i9100t which has a different modem. When I flash any rom I reflash just the modem and all is good again. But first make sure your apn is correct and you have selected it (should have the green dot beside it).
Sent from my GT-I9100
Click to expand...
Click to collapse
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
ctomgee said:
sxi200 makes an excellent point. Make sure what your model is - GT-I9100, GT-I9100G, GT-I9100T - it WILL make a difference.
Click to expand...
Click to collapse
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
ProNewb said:
I have tried everything u all said.
made sure it is i9100 and not T or G.
Now i am going to downgrade to 2.3.5 to jpkj2. my final option.
anything i should know about?
Click to expand...
Click to collapse
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
sxi200 said:
Because I've flashed an international firmware, when the phone boots up it shows i9100 and in settings / about phone it also shows i9100.
The only place it shows as an i9100T is on the sticker under the battery. So remove the battery and check just in case.
EDIT: you say you flashed an Indian firmware. Aren't Indian models the i9100G. Maybe you need to flash the international firmware if you indeed have an international model.
Sent from my GT-I9100
Click to expand...
Click to collapse
Well, i did go back and flash the jpkj2 2.3.5. and still no connection.
will try from an open place again later.
i have an issue with my internet connection too. i got an I9100(international version) and things were perfect till i switched to 4.0.3 and since then, my internet just refuses to connect although i have full signal strength and 3G or H displayed. but there is nothing going through.
it works again after i switch to airplane mode and back. i have no issues with wifi.
i have tried many modems and roms. i am currently using the KI4 rom and it still gives me issues.
please help.
update on situation
Hi guys,
just an update on my situation. Had the phone sent to Samsung twice for a check and bothe times it came back perfect with test sheets showing all was perfect. I decided to have another check done on the phone and it now says that the phone is blocked!! What the hell!. When i checked first weeks ago all was good and now it says it's blocked, but i'm getting 2g signal, surely i should be getting nothing if it's barred.
I have no idea who the origional service provider was of the phone, is there any way of finding out who the origional provider was or is there any way of removing this barring?
Thanks
Thanks to xda, i installed ICS succesfully on my Galaxy SII (originally UK Orange Mobile). But, the problem is that, in medium network coverage place, the mobile network doesn't work, message are sent/recieved easily but No phone call can be made. I installed ICS twice, once without wiping data, and later wiping data. But still, the problem is same. Please someone help me. My baseband version is
I9100XXLPQ, ANDROID VERSION 4.0.3, BUILD NUMBER IML74K.XXLPQ.
Thanks in advance. .
Try a different modem. You can download and flash them from rom manager if your rooted
Help me on choosing ROM
Can you please help Me on choosing perfect ROM for my mobile.
As i stated, IT's UK Orange Mobile, but now is used in Nepal (South Asia). On version information,
PDA is : I9100XXLPQ
PHONE : I9100XXLPQ
CSC : I91000XXLPD
I have rooted my mobile.
I'm using HyDrOG3NICS I think its great. You will have to try a few and make up your own mind though.
I have a Bell Samsung SGS II GT-I9100M that I sim unlocked. (it's not rooted but permanently sim unlocked)
When I first got this phone I tried to install an update through Kies and it didn't work. Anyways I had this phone on the side ever since then and I barely use it (yea sad I know).
Currently the phone is running Android 2.3.3, Baseband I9100MUGKG2, Build number GINGERBREAD.UGKG2 and under KIES it says I have the the latest firmware version which is PDA:KG2 / PHONE:KG2 / CSC:KG2 (BMC)
Anyways I am sure there is a new update but no matter what I do I can't install it.
I tried right-clicking on my device in KIES and the Firmware upgrade option is greyed out
I tried under tools and pressing on Firmware upgrade and initialization and it says
'GT-I9100M' does not support initializing.
What do I do? I would like to update to the latest firmware. I am pretty good with android although I am not familiar with Samsung Devices.
Please help, thank you.
try getting a stock rom for your region through fusdownloader
then reboot into download mode, start odin 1.85 add the downloaded rom to pda (this step actually is explained a lot in this forum so look it up if you are not entirely sure what to do ;P )
then flash the new firmware, should work just fine
cheers
RacecarBMW said:
I have a Bell Samsung SGS II GT-I9100M that I sim unlocked. (it's not rooted but permanently sim unlocked)
When I first got this phone I tried to install an update through Kies and it didn't work. Anyways I had this phone on the side ever since then and I barely use it (yea sad I know).
Currently the phone is running Android 2.3.3, Baseband I9100MUGKG2, Build number GINGERBREAD.UGKG2 and under KIES it says I have the the latest firmware version which is PDA:KG2 / PHONE:KG2 / CSC:KG2 (BMC)
Anyways I am sure there is a new update but no matter what I do I can't install it.
I tried right-clicking on my device in KIES and the Firmware upgrade option is greyed out
I tried under tools and pressing on Firmware upgrade and initialization and it says
'GT-I9100M' does not support initializing.
What do I do? I would like to update to the latest firmware. I am pretty good with android although I am not familiar with Samsung Devices.
Please help, thank you.
Click to expand...
Click to collapse
The Bell ICS update isn't rolling out until tomorrow, according to MobileSyrup... here's a copy of the leaked bell memo from their site..
Since you have an unlocked sim device which belongs to other network service provider so kies will not update it as you have some other sim..so the best method is choose the stock rom as per you region from www.sammobile.com and then flash it through odin.
Sent from my GT-I9100 using xda premium
adik82 said:
Since you have an unlocked sim device which belongs to other network service provider so kies will not update it as you have some other sim..so the best method is choose the stock rom as per you region from www.sammobile.com and then flash it through odin.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
He has the proper bell firmware. The actual software update isn't being released until tomorrow, hence the reason Kies can't find the update.
Hi Guys,
I'm a little bit confused i cannot get any updates via Kies or using OTA , i bought my SGS II from Kuwait and currently i'm in Egypt , i changed the CSC to Egypt once to solve this problem but it's the same my firmware info is I9100JPKJ2/I9100JPKJ1/I9100XXKI4/I9100JPKJ2 (xxx)
Any advice?
Thanks
I am not sure if Android 4.x is already out for the "M" version.
Good Morning to all
First if i post this at wrong place so forgive me and place it to original place
model no. : SHV-E160L
And. Ver. : 2.3.6
Baseband Version : E160L.EL26.1747.LT
Kernel Version : 2.6.35.11-E160.Fa09.1726-CL867558
Storage : 9.86 GB USB Storage
System Storage : 1.87 GB
it is U+ LTE.
i purchase this phone and it is working very fine but i want to upgrade to jaily Bean.
so please help me to upgrade it
i have some Question before upgrade it
1. this phone have no IMEI number !!! ha ha when i press *#06# it will not display any thing
2. but in this phone network is working so it is unlock??
if i am update it so it is working fine or not?
Current Firmware Version : PDA:FA09/PHONE:EL26
When i connect mobile with kies it will show
Latest Firmware Version : PDA:UH24/PHONE:FH02
Is it safe to Upgrade from Kies?
Thank you all in Advance
Shv e160L
android beginner said:
Good Morning to all
First if i post this at wrong place so forgive me and place it to original place
model no. : SHV-E160L
And. Ver. : 2.3.6
Baseband Version : E160L.EL26.1747.LT
Kernel Version : 2.6.35.11-E160.Fa09.1726-CL867558
Storage : 9.86 GB USB Storage
System Storage : 1.87 GB
it is U+ LTE.
i purchase this phone and it is working very fine but i want to upgrade to jaily Bean.
so please help me to upgrade it
i have some Question before upgrade it
1. this phone have no IMEI number !!! ha ha when i press *#06# it will not display any thing
2. but in this phone network is working so it is unlock??
if i am update it so it is working fine or not?
Current Firmware Version : PDA:FA09/PHONE:EL26
When i connect mobile with kies it will show
Latest Firmware Version : PDA:UH24/PHONE:FH02
Is it safe to Upgrade from Kies?
Thank you all in Advance
Click to expand...
Click to collapse
As I know, If the device is recognized by KIES it is an original version of the phone. but there are devices that somebody has flashed a ROM in to the device. In that case it will show the IMEI and Model number as the name that created by the ROM Devoloper. so remove the batery and try to locate the model no (IMAGE 01)
then download the Stock and Flash it via ODIN
All The Best....
I can not be downloaded. I want download link. help me Please!!: crying: