Please help, I can not Recovery 4.0.7 ROM.:crying::crying::crying:
4.0.25 rom eats disgusting.
Help Help Help Help Help Help
:crying::crying::crying::crying::crying::crying::crying::crying:
isIran said:
Please help, I can not Recovery 4.0.7 ROM.:crying::crying::crying:
4.0.25 rom eats disgusting.
Help Help Help Help Help Help
:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi!
You can not downgrade to officialy firmware 4.0.7 !
...but you can dawngrade to root version firmware 4.0.7 !
surdu_petru said:
Hi!
You can not downgrade to officialy firmware 4.0.7 !
...but you can dawngrade to root version firmware 4.0.7 !
Click to expand...
Click to collapse
Hello my friend
Why؟:crying:
That is no way?:crying:
Install rooted 4.0.7 rom but I had no change in speed and performance
Even the media center and sys monitoring software are not altered and has the same problems.
Ram is not even completely remove and install a new ROM?
The reFormat does not have any effect
:crying::crying::crying::crying::crying:
isIran said:
Hello my friend
Why؟:crying:
That is no way?:crying:
Install rooted 4.0.7 rom but I had no change in speed and performance
Even the media center and sys monitoring software are not altered and has the same problems.
Ram is not even completely remove and install a new ROM?
The reFormat does not have any effect
:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hi again !
so, you are currently in what firmware ?
If you are already installed officialy Archos firmware 4.0.25 , you can not downgrade to officialy 4.0.7 !
...so, the only solution , if you want to use firmware 4.0.7 is to install root version !
surdu_petru said:
Hi again !
so, you are currently in what firmware ?
If you are already installed officialy Archos firmware 4.0.25 , you can not downgrade to officialy 4.0.7 !
...so, the only solution , if you want to use firmware 4.0.7 is to install root version !
Click to expand...
Click to collapse
Hi man
Thanks
You can try using a test firmware, it allowed me to downgrade from official ICS to official HC
1. Grab a test firmware from this thread (if the file is missng check other links in thread, there were 4 versions IIRC)
2. Flash it
3. Boot it
4. Flash 4.0.7 or whatever you want
I can't guarantee it will work but it is worth to give a shot
EDIT:
HERE is a working download link
gen_scheisskopf said:
You can try using a test firmware, it allowed me to downgrade from official ICS to official HC
1. Grab a test firmware from this thread (if the file is missng check other links in thread, there were 4 versions IIRC)
2. Flash it
3. Boot it
4. Flash 4.0.7 or whatever you want
I can't guarantee it will work but it is worth to give a shot
EDIT:
HERE is a working download link
Click to expand...
Click to collapse
hi man
not work :crying::crying::crying:
error : Update failed : (221) :crying:
please help me ((
Thanks man
isIran said:
hi man
not work :crying::crying::crying:
error : Update failed : (221) :crying:
please help me ((
Thanks man
Click to expand...
Click to collapse
I'm sorry but I'm out of ideas.
Apparently 4.0.25 does not allow to flash older firmwares (including official SDE)
Reset to Factory
You can reset to Factory any version but it reformats internal sdcard too, make sure you backup before trying.
Boot Archos A80S Recovery -> Format System -> Reformat Device... -> I Understand
Takes a long time, be patient. Recovery comes up -> USB Connection: Press OK to disconnect
Copy firmware_archos_it4.aos to A80S_REC drive that pops up in Windows -> Update in progress...
Tablet will reboot, be patient again, takes a long time. I have done this several times, works on A80S should work on all G9s.
stevemp
stevemp said:
You can reset to Factory any version but it reformats internal sdcard too, make sure you backup before trying.
Boot Archos A80S Recovery -> Format System -> Reformat Device... -> I Understand
Takes a long time, be patient. Recovery comes up -> USB Connection: Press OK to disconnect
Copy firmware_archos_it4.aos to A80S_REC drive that pops up in Windows -> Update in progress...
Tablet will reboot, be patient again, takes a long time. I have done this several times, works on A80S should work on all G9s.
stevemp
Click to expand...
Click to collapse
Hi !
I can confirm , if you have SDE installed - your method will not work for downgrade firmware 4.0.25 !
I have not tried without SDE .... ( have not device for few weeks ) ! :good:
Strange
surdu_petru said:
Hi !
I can confirm , if you have SDE installed - your method will not work for downgrade firmware 4.0.25 !
I have not tried without SDE .... ( have not device for few weeks ) ! :good:
Click to expand...
Click to collapse
Odd, I have unofficial sde and have succeeded several times. What it does is completely format the tablet and I have gone back to 4.0.7 from 4.0.25 and once from 4.0.7 to Honeycomb. I forgot to remove external sdcard yesterday and formatted it also. Took a few hours to copy everything back.
stevemp
stevemp said:
Odd, I have unofficial sde and have succeeded several times. What it does is completely format the tablet and I have gone back to 4.0.7 from 4.0.25 and once from 4.0.7 to Honeycomb. I forgot to remove external sdcard yesterday and formatted it also. Took a few hours to copy everything back.
stevemp
Click to expand...
Click to collapse
Hi !
...weird stuff
...also I have unofficialy SDE , and always when I tried your command ( SDE -> Format System -> Reformat Device -> I understand ) - microSD was not touched , and sure you are right , you can flash only official Archos .aos file !
( USB cable should be not disconnected ! )
surdu_petru said:
Hi !
...weird stuff
...also I have unofficialy SDE , and always when I tried your command ( SDE -> Format System -> Reformat Device -> I understand ) - microSD was not touched , and sure you are right , you can flash only official Archos .aos file !
( USB cable should be not disconnected ! )
Click to expand...
Click to collapse
I have ICS_BLUE_V04 installed and now it fails when using 4.0.7 firmware_archos_it4.aos. I must have had an oldtimers memory lapse, SORRY
stevemp
stevemp said:
I have ICS_BLUE_V04 installed and now it fails when using 4.0.7 firmware_archos_it4.aos. I must have had an oldtimers memory lapse, SORRY
stevemp
Click to expand...
Click to collapse
I see no reason to install an older officialy version , as long as root version is identical to the official version !
stevemp said:
You can reset to Factory any version but it reformats internal sdcard too, make sure you backup before trying.
Boot Archos A80S Recovery -> Format System -> Reformat Device... -> I Understand
Takes a long time, be patient. Recovery comes up -> USB Connection: Press OK to disconnect
Copy firmware_archos_it4.aos to A80S_REC drive that pops up in Windows -> Update in progress...
Tablet will reboot, be patient again, takes a long time. I have done this several times, works on A80S should work on all G9s.
stevemp
Click to expand...
Click to collapse
hi man
The problem is that I can not even format the ROM installation
Error text:crying:
this firmware update is too old for your hardware version. (221)
It can not be installed rom?:crying::crying::crying:
I am very upset
Thanks
Related
Hi there
I would need the step by step for the Cyanogenmod 7.0.0 - Android 2.3 / Gingerbread for Folio 100.
Im used to only one file ex. update.zip on root of sd card etc...
This has git tree both from Derartem and nopy that i dont have a clue what that is for and also the atached files
Been thru all the general folio but didnt find any help or i missed it...
Please help!!
Thanks in advanced.
Download update.zip, apply it in recovery and delete date and cache, like installing any other rom???
Jon2555 said:
Download update.zip, apply it in recovery and delete date and cache, like installing any other rom???
Click to expand...
Click to collapse
Ok... so what is the git tree for, and the atached files.
Thanks
DodgeBullets said:
Ok... so what is the git tree for, and the atached files.
Thanks
Click to expand...
Click to collapse
git is a tool for developers to share code. If you don't develop, you won't need it.
Ok im satisfied ty a lot
Google apps
Hi I just flashed lates CM7 and it was supposed to ask for which gapps to install during initiation, but it didn't...
How can I install them afterward, since there is no market app?
lillknurra said:
Hi I just flashed lates CM7 and it was supposed to ask for which gapps to install during initiation, but it didn't...
How can I install them afterward, since there is no market app?
Click to expand...
Click to collapse
Hi,
I got it to work.
I applied the gapps from http://forum.xda-developers.com/showthread.php?t=933989 using clockwork and then the Market app was installed.
When I started the market app for the first time I was prompted for which gapps I wanted to install
3G
The 3G modem update working?Or The only version wich is good the 1.3d foliomod?
Thomas7610 said:
The 3G modem update working?Or The only version wich is good the 1.3d foliomod?
Click to expand...
Click to collapse
I haven't tried it, but I can test with my huawei from Telia.
Do I need any specific drivers (3G modem update...?), or sholud it work by only by pluging it in?
lillknurra said:
I haven't tried it, but I can test with my huawei from Telia.
Do I need any specific drivers (3G modem update...?), or sholud it work by only by pluging it in?
Click to expand...
Click to collapse
So... Now I have tried out all instructions on how to disable internal storage and PIN.
Unfortunately I cannot get it to work
Yes U neeed to install the 3G modem update(this installed the 3g modem drivers) and after set the carryer apn setings.
Hi,
Where can I find the 3G modem update files?
I thought they were supposed to be applied in the ROM
After update Folio 100 to CyanogenMod 7.1.0-RC0 I can't update to other ROMs, for example FolioMod1.4 because after the update to FOlioMod the screen is black.
Any ideas?
I have a bricked Folio because any changes that I made, for example, I select language to Spanish and change wallpaper and after one reboot, the wallpaper isn't the wallpaper I selected before and the language is again in English.
I can say that CyanogenMod bricked my Folio, I can't do anything with this.
j5boot said:
After update Folio 100 to Gingerbread 7.1.0-RC0 I can't update to other ROMs, for example FolioMod1.4, and the screen is black.
Any ideas?
Click to expand...
Click to collapse
I tried this with FolioMod 1.4 and had the same problem, but managed to solve it. I'm a newbie, but I will try to explain how it's done.
Since ClockworkMod is installed with CM7 (Gingerbread 7.1.0...),this will be the interface for factory data reset and system update.
In the CLockworkMod menu yo must select wipe data/factory reset before or after you apply a new update.zip (which also is done in the ClockworkMod interface)
Thanks for the reply lillknurra, but make wipe after and before update don't work for me.
This time, the first time that I booted FolioMod works correctly, but when reboot, I have a black screen again.
Any more ideas?
j5boot said:
Thanks for the reply lillknurra, but make wipe after and before update don't work for me.
This time, the first time that I booted FolioMod works correctly, but when reboot, I have a black screen again.
Any more ideas?
Click to expand...
Click to collapse
Hi,
If a WIPE doesn't help which it most likely should. You could try to "roll back" the Folio to original FolioStock according to instructions found here:
http://forum.xda-developers.com/showthread.php?t=846199
I remember that I also read that there are some options to format some partitions, but I can not find it when searching...
I tried to roolback Toshiba Original ROM and works fine, but when I update to FolioMod 1.4 boots only the first time.
Now I'm triying to flash recovery image with fastboot metod before flash FolioMod.
http://forum.xda-developers.com/showthread.php?t=915894
In 10 minutes I know if it works.
EDIT:
Nothing, I will try all via fastboot mode and only works the first boot. When I do a fastboot flash boot boot.img I get a error:
failed to process command flash:boot error(0x30003)
In Spain is very late, tomorrow I'll try more options.
Hi, I have a folio 100 with cyagen 7 rom allready working, but when I try to install ClockworkMod recovery form ROM manager I have to choose from a list of devices and Toshiba folio 100 is not listed, probably we have to wait more or it's a my fault? thanks.
Uttermarcus said:
Hi, I have a folio 100 with cyagen 7 rom allready working, but when I try to install ClockworkMod recovery form ROM manager I have to choose from a list of devices and Toshiba folio 100 is not listed, probably we have to wait more or it's a my fault? thanks.
Click to expand...
Click to collapse
Please don't crosspost (at least in the same board). ROM Manager does not (still) work for Folio. Flash it from update.zip
O Sorry,ok thanks.
edit: resolved. From rom manager cannot reboot into recovery mode but if I manual recover folio 100 (volume up and power) than up than down than up instead enter in toshiba recovery mode now I have clockworkmod recovery. I used advent vega device in clockworkmod list devices.
Hey guys, so I downloaded cm9 and tried to install it on my phone.
I got it from this link and also followed the video tutorial there: http://forum.xda-developers.com/showthread.php?t=1500234
I had rooted my phone and had CWM recovery v5.0.2.6
Now when I try to reboot, there is just an blue screen.
I did exactly like in the video, I tried 2 times. Still it didn`t work. Please help. Could someone provide any step by step instructions other than the video?
Thanks.
I think you needed to use with CWM 5+
Try to get back into CWM and root your old ROM.
I am very bad at this... So I dont really know how to do that... could you provide any steps or an tutorial?
Edit:well I tried to format sd card and system but nothing. Could someone provide a link to gingerbread 2.3.5 and a way Icould put it on my phone? Also, could I do anything with samsung kies?
Kritosein said:
I am very bad at this... So I dont really know how to do that... could you provide any steps or an tutorial?
Edit:well I tried to format sd card and system but nothing. Could someone provide a link to gingerbread 2.3.5 and a way Icould put it on my phone? Also, could I do anything with samsung kies?
Click to expand...
Click to collapse
NO NO. Don't use kies. Kies sucks a lot. Search the developer forum for "clockworkmod 5" flash it normally (I suppose you already know how-to since you have CWM4) after getting CWM5, flash ICS/CM9 Normally. no need to flash GB
Here is cwm 5
http://forum.xda-developers.com/showthread.php?t=1291327
Sent from my GT-S5830 using Tapatalk 2 Beta-5
Thanks guys, okey I have everything ready for next try ( After I get my phone to work again) Right now I am looking for Cooper ops file, so I can flash to 2.3.5 (france version but I guess it works) so could anyone give me a link to cooper ops file so I get my phone working?
Thanks.
EDIT: wooohooo found cooper ops, atm odin is downloading the files. I see what I can do after that. Thanks for all the help.
Kritosein said:
Thanks guys, okey I have everything ready for next try ( After I get my phone to work again) Right now I am looking for Cooper ops file, so I can flash to 2.3.5 (france version but I guess it works) so could anyone give me a link to cooper ops file so I get my phone working?
Thanks.
EDIT: wooohooo found cooper ops, atm odin is downloading the files. I see what I can do after that. Thanks for all the help.
Click to expand...
Click to collapse
Glad we could help, be carefull next time. Always try to use newest software.
Ughh I forgot to root my phone right after flashing. So I installed CWM before rooting.. how do I root now? And also I think it is still not working. The phone has been blue for about 2 minutes now. I followed the video exactly like it was.
EDIT: damn... so after getting the blue screen again I thought of going back to normal ver and maybe some other custom ROM... but guess what.... It doesnt work anymore... I did just like before.Went into download, used ODIN to download 2.3.5 french ver to my phone, odin says PASS. But last time It had booted correctly by 4:40 or so. This time like 10 minutes have passed and still rebooting. What to do now?
EDIT2: Am I allowed to make a new thread since the problem is not with cm9 anymore?
here, check this out:
http://forum.xda-developers.com/showthread.php?t=1291327
download it and flash it through stock recovery
i dont think you need to root it before flashing this (i didnt)
i just flashed this over the stock rom (non rooted) and then flashed cm7.2
i too had such problems but dont worry flash some stock rom with odin then it wont boot so remove your battery and place it again.now go to stock recovery wipe data/factory reset and wipe cache partition then reboot.then use cwm 5 to flash cm 9.
noobdroid_90 said:
here, check this out:
http://forum.xda-developers.com/showthread.php?t=1291327
download it and flash it through stock recovery
i dont think you need to root it before flashing this (i didnt)
i just flashed this over the stock rom (non rooted) and then flashed cm7.2
Click to expand...
Click to collapse
I have that, and I am trying to flash cm9.
So.. I`m kinda at the beginning again... I tried some other roms, but non were as good looking as that cm9 ICS beta 6.
Could anyone give me step by step tutorial? Because I did EXACTLY like in the video. 2 times. And it still didnt work. Please help.
Well here what have done for flash th rom for the first time:
-I was on gingerbread 2.3.6 XWKS2 (my device was root by super one click and i flash CWM 5 via recovery)
-Then i put the rom in my sdcard, reboot in recovery (press home and power button)
'
-Into recovery i wipe cache partition and wipe data, go in advanced and wipe dalvik cache go back to the main menu and select install zip from sdcad choose the file you have(here it's cm_ace-ota-eng.01042012) then press yes wait a while (the rom are installing) then when it's done select reboot system now.
-The first boot take a while (and i have the blue screen too you just have to wait but if it's exceed 5-10 minute try to reflash the rom)
I do that will all rom i have install and i don't have any problem. Hope i help you
*Sorry if my english is bad
Danceslas said:
Well here what have done for flash th rom for the first time:
-I was on gingerbread 2.3.6 XWKS2 (my device was root by super one click and i flash CWM 5 via recovery)
-Then i put the rom in my sdcard, reboot in recovery (press home and power button)
'
-Into recovery i wipe cache partition and wipe data, go in advanced and wipe dalvik cache go back to the main menu and select install zip from sdcad choose the file you have(here it's cm_ace-ota-eng.01042012) then press yes wait a while (the rom are installing) then when it's done select reboot system now.
-The first boot take a while (and i have the blue screen too you just have to wait but if it's exceed 5-10 minute try to reflash the rom)
I do that will all rom i have install and i don't have any problem. Hope i help you
*Sorry if my english is bad
Click to expand...
Click to collapse
Hey, this is exactly like in the video, I tried that. But this time I am going to first use odin to put XWKS2 2.3.5 on my phone, and then root using SuperOneClick (Last time I used udp1 or something like that) and then try again.
Kritosein said:
Hey, this is exactly like in the video, I tried that. But this time I am going to first use odin to put XWKS2 2.3.5 on my phone, and then root using SuperOneClick (Last time I used udp1 or something like that) and then try again.
Click to expand...
Click to collapse
Ow sorry then but i just tell you the method i use i do not remark that
But it's strange your device do not flash propely and i saw you've try a lot of thing I'm speechless for the moment just tell us if you succeed to flash cm9.
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Gahu said:
Hello guys,
I've got an X10mini (E10) (second hand but should not branded)
I'm actually stucked in a bootloop. It happened after I tried flashing the miniCM7 ROM with CWM.
I've tried the wipe data/factory reset frome CWM but nothing happened
I've tried the recovery option from my previous backup
Nothing
I've tried reflashing the Stock Rom (found in one of Xda-developers thread)
And I still got a bootloop (with the Sony Ericson logo)
Could anyone help me? =)
Click to expand...
Click to collapse
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
SmG67 said:
Why don't you try a repair with SEUS or PC Companion, that will get you back to original.
You said you did wipe data/factory reset, but did you wipe cache and dalvick-cache too (second one in advanced menu in CWM), because they're filled with useless junk from your old ROM, causing many errors.
Click to expand...
Click to collapse
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Gahu said:
I can't find the SEUS or PCC repair option
And yes I did wipe the dalvick cache but still nothing happens
Click to expand...
Click to collapse
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
SmG67 said:
Disconnect your phone from your pc
Start PC Companion
Choose Support Zone
It will try to find an update for your phone, but since it's disconnected it can't
It will offer a Repair link
Follow the instructions from there.
Click to expand...
Click to collapse
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Gahu said:
The fact is that the last version of PC Companion doesn't have that Support Zone anymore
and downloading the previous version doesn't help cause it force you to upgrade the software ...
Click to expand...
Click to collapse
I've updated mine whenever it requested it and in mine it is still there...
SmG67 said:
I've updated mine whenever it requested it and in mine it is still there...
Click to expand...
Click to collapse
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Gahu said:
Okay I think I might be cursed or something ... Cause this option never show with my PCC ...
I only got a "blank" window even if I restart with the phone unpluged
Click to expand...
Click to collapse
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
SmG67 said:
I see, mine looks more like in the screenshot below
You've got an unlocked bootloader right?
I can get you an original SE Firmware to flash with flashtool if you're interested... just let me know...
Click to expand...
Click to collapse
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Gahu said:
Yeah I unlocked the bootloader with flashtool (the log said it was done properly)
And it would be nice to get the original SE firmware =D (I tried one and it didn't solve anything but still ... what choice do I got?)
Click to expand...
Click to collapse
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
SmG67 said:
You don't have much choice i suppose, i'll give you the download link in a pm
Just download it, put it in the firmwares subfolder where flashtool is installed and flash it to your phone, it will take a while because it flashes everything (kernel and rom), but i hope it will help you
Click to expand...
Click to collapse
OH yeah =)
So long to the Bootloop =D Thanks =)
Gahu said:
OH yeah =)
So long to the Bootloop =D Thanks =)
Click to expand...
Click to collapse
Good luck flashing m8 Keep it lying around, you can always get out of trouble
SmG67 said:
Good luck flashing m8 Keep it lying around, you can always get out of trouble
Click to expand...
Click to collapse
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
SmG67 said:
Connect your phone to your PC using the usb-cable
Boot into CWm (you say you can)
Go into Mounts and Storage
Choose USB-Mass storage
You should be able to access the sd-card from your pc now and copy the ROM and maybe Gapps.
Click to expand...
Click to collapse
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Kubaz said:
Worked like a charm!. Thank you very much. I went for mini cm 7 as it seemed the most stable. thanks for your help.
just need to get the sd card to mount and I am all set. Do you have any ideas why I can't get it to mount?
Click to expand...
Click to collapse
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
SmG67 said:
I don't know, apparently it worked fine when you connected it to your pc...
Maybe you could pull all your files off the sd-card to your pc, boot into cwm and format the sd-card (in mounts and storage), then reboot into the rom.
If that's all successful, put the files back on your sd-card.
Click to expand...
Click to collapse
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Kubaz said:
What would happen if I select "apply update from sd card". This is the second option under CWM recovery.
Should I restore from Nanadroid. i s this necessary?
Could partitioning the sd card help? Thanks again!
Click to expand...
Click to collapse
The 'Apply Update.zip' does exactly the same thing as the 'Install zip from sd-card', but the first option only works for zip-files named 'update.zip' in the root of your sd-card, the second option will let you browse the sd-card and select a zip-file with any name. The second option is the one you use to install your ROM.
Restoring from nandroid, just fills your internal phone-memory with the old stuff you had in there, it won't affect your sd-card, other than that it reads the nandroid from that sd-card.
Your sd-card needs to be formatted with the fat-filesystem to work properly, so partitioning or not makes not much of a difference, only that the available space for your stuff (music, photo's, etc.) is less because the other partitions take up space too.
If you can flash your ROM in CWM from sd-card I don't really see any problem with your sd-card.
worked like a charm. many thanks!
Kubaz said:
I saw your thread.
I also have an x10 Mini and got stuck in a bootloop (colors swishing around on screen). I rooted, installed xrecovery - what shows up in the screen is cwm recovery v 5,0,2,8. I unlocked the boot loader, flashed this Kernel using flash tool (an older version): U20_nAa-14_2.6.29.6-nAa-14.ftf I tried to downloand nAa 11 but 14 kept coming up, so I put that in the firmware file along with the stock Kernel. I forgot to install the drivers, but the flash tool said it was successful. After disconnecting and starting the phone "Ana" words not the symbol came up and the boot loop began. Alternatively, on start up, I can get into cwm recovery. I didn't save the rom or google app zip on my sd card as I assumed I could that after flashing the Kernel, but the bootloop makes impossible
My goal is to install Android Fire 2.3.
I would really appreciate any guidance.
Click to expand...
Click to collapse
"Alternatively, on start up, I can get into cwm recovery".
I have the exact same problem though i cant get into clockworkmod recovery. May i know how you got into cwm recovery? Any help is appreciated.
Thanks!
today I tried for the first time to root and install a ROM ( i'm not a newb), after flashing the SDE I start flashing the ROM but when I restarted I got a bootloop. I tried to fix It going back to the official firmware but when I press "Update Firmware" I got "Error Code 207", I don't know what to do I tried several times with no result.
Any idea?
Sorry for my bad English
Svradi said:
today I tried for the first time to root and install a ROM ( i'm not a newb), after flashing the SDE I start flashing the ROM but when I restarted I got a bootloop. I tried to fix It going back to the official firmware but when I press "Update Firmware" I got "Error Code 207", I don't know what to do I tried several times with no result.
Any idea?
Sorry for my bad English
Click to expand...
Click to collapse
Hi,
Go to recovery->Plug device to PC by USB-> Format System-> Reformat. After that tablet mount recovery disc on PC and You must put *.aos file to this disc. After flash, tablet will start load new FW.
freezenook said:
Hi,
Go to recovery->Plug device to PC by USB-> Format System-> Reformat. After that tablet mount recovery disc on PC and You must put *.aos file to this disc. After flash, tablet will start load new FW.
Click to expand...
Click to collapse
I have done this before without result. Now I'm trying to uninstall the SDE and update without It, maybe the problem is SDE
aos firmware
Svradi said:
I have done this before without result. Now I'm trying to uninstall the SDE and update without It, maybe the problem is SDE
Click to expand...
Click to collapse
You have to use the same version firmware (or newer) that you had installed, older version won't install.
stevemp said:
You have to use the same version firmware (or newer) that you had installed, older version won't install.
Click to expand...
Click to collapse
yes, I have the latest.
Now after I uninstalled the sde, looks like it works. I'm installing the official firmware.
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Infinity_bg said:
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Click to expand...
Click to collapse
Did you wipe personal data and wiped dalvik cache also mate?
DaRk-L0rD said:
Did you wipe personal data and wiped dalvik cache also mate?
Click to expand...
Click to collapse
Affirmative. I do it several times... no luck at all.
Infinity_bg said:
Affirmative. I do it several times... no luck at all.
Click to expand...
Click to collapse
The only solution mate is the one that IAmNice told you. Flash stock rom and then try installing again cm.
IAmNice said:
Can you go into flashmode? If you can use flashtool to flash a stock ROM and then flash fxp 226..
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Infinity_bg said:
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Click to expand...
Click to collapse
Drivers are already included for most of xperia devices.
Here you can download the latest version: http://androxyde.github.io/
There is also a tutorial on youtube on how to use flashtool.
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Infinity_bg said:
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Click to expand...
Click to collapse
You cam access fastboot mode this way:
turn off the phone
Plug usb cable on pc
Press volume up key while plugging usb on your phone. You will see that the led bar becomes blue.
Done